Wyniki wyszukiwania: eglo

Sortowanie

305 modeli

P
PrintablesBret

Starbond Caddy for Sy's Peglock System

Hold 3 CA glues, accelerator, and tips on your pegboard with a couple of Sy's peglock connectors. I use the peglock system in my woodshop and wanted to have a place to keep my CA glues handy, so found this container and tweaked it to fit…

Wydruk około 13,25 €–16,19 € nettoWstępna wycena jednego wariantu

Pobrania
34
Polubienia
6
Ocena
0
P
PrintablesStellasFun

Sy's Peglock - Locking Pegboard System

This model uses my locking pegboard mount system for 1" standard pegboards. Magnet holes (if present) are designed for 10mm diameter, 3mm thick magnets. “Board Attachment” parts are universal to all models. Print with 3 perimeters and…

Pobrania
6297
Polubienia
1111
Ocena
4,9
P
PrintablesStellasFun

Sy's Peglock - Divided Bin

This bin should fit most small tools, brushes, files, picks, tweezers, or whatever else you care to throw in it. A divider runs most of the way up, dividing the bin in half to prevent tools from tipping too far over. The entire container…

Pobrania
1032
Polubienia
92
Ocena
5
P
PrintablesStellasFun

Sy's Peglock - Gridfinity 3x1 Baseplate

Mounting for Voidstar Labs' Gridfinity containers on pegboards without wiggle? Heck yeah! This model uses my locking pegboard mount system for 1" standard pegboards. Magnet holes (if present) are designed for 10mm diameter, 3mm thick…

Pobrania
1015
Polubienia
143
Ocena
4,92
P
PrintablesStellasFun

Sy's Peglock - Screwdriver

A screwdriver holder for pegboards. Should work for most large-handled models. This model uses my locking pegboard mount system for 1" standard pegboards. Magnet holes (if present) are designed for 10mm diameter, 3mm thick magnets. “Board…

Pobrania
824
Polubienia
66
Ocena
4,83
P
PrintablesStellasFun

Sy's Peglock - Tape Measure

This tape measure holder (or shallow dish if you prefer to use it for something else) prints without supports (make sure your bridging settings are dialed in!). Uses two board attachments. This model uses my locking pegboard mount system…

Pobrania
815
Polubienia
66
Ocena
5
P
PrintablesStellasFun

Sy's Peglock - Thin Hook

This small hook - split into two interlocking parts for optimal orientation and strength - will hold just about anything with a hole in it. Print with plenty of perimeters and use a brim if you really need to (not required). This model…

Pobrania
785
Polubienia
53
Ocena
5
P
PrintablesStellasFun

Sy's Peglock - Large Hook

A larger hook for hanging items in pegboards. Works great for hammers. This model uses my locking pegboard mount system for 1" standard pegboards. Magnet holes (if present) are designed for 10mm diameter, 3mm thick magnets. “Board…

Pobrania
778
Polubienia
56
Ocena
5
P
PrintablesStellasFun

Sy's Peglock - Safety Glasses

A pegboard hook for hanging impact-style safety glasses. This model uses my locking pegboard mount system for 1" standard pegboards. Magnet holes (if present) are designed for 10mm diameter, 3mm thick magnets. “Board Attachment” parts are…

Pobrania
692
Polubienia
57
Ocena
5
P
Printablesplomdawg

Sy's Peglock - Gridfinity Baseplate (press-fit magnet)

The 1x3 can be tiled horizontally! The others do not line up. I use a hammer and this jig to insert the magnets. Without glue, you can retrieve the magnets by poking them out through the bottom. Check out Sy's Peglock - Locking Pegboard…

Pobrania
649
Polubienia
110
Ocena
5
P
Printablesntressler7

Sy's Peglock - Tape Holder

This is a tape holder that is compatible with Sy's Peglock - Locking Pegboard System . It's designed to be used with 3/8" dowel rods. Inspired by this model . Printing Instructions Rafts: No Supports: No Resolution: 0.28 Infill: 15% Wall…

Pobrania
604
Polubienia
95
Ocena
4,86
P
PrintablesStellasFun

Sy's Peglock - Needle Nose Pliers

A magnetic mount for securely holding Workpro needle nose pliers (or other medium size pliers with a taper). This model uses my locking pegboard mount system for 1" standard pegboards. Magnet holes (if present) are designed for 10mm…

Pobrania
555
Polubienia
53
Ocena
4,5
P

Sy's Peglock - Spray Can Holder

Holder for spray paint can on a pegboard using the Sys's peglock system. I included 2 pegs on the build plate, but you can remove them or change them for the pegs that work for you. Go see Sys's Peglock :…

Pobrania
447
Polubienia
265
Ocena
4,5
P
PrintablesNottingham82

Sy's peglock for smaller holes than 1/4"

I bought 4 different types of pegboard for my garage. Some had ¼ holes and some had 15/64 inch holes. All spaced 1 inch apart. Sy's peglock would not fit in the smaller holes so I used his fusion file and reduced the pegs from 6mm to 5mm……

Pobrania
410
Polubienia
39
Ocena
5
P
Printablesntressler7

Sy's Peglock - Peglock Board Attachment - Parametric Template

Sy was nice enough to provide the .f3d file for his amazing pegboard system . However, judging from the comments on that model, it seems that some people are still resorting to scaling the entire model rather than adjusting the relevant…

Pobrania
408
Polubienia
146
Ocena
5
P
PrintablesVickash

Sy's PegLock - Universal Caliper Mount Improved

Universal caliper holder for Sy's Peglock System: https://www.printables.com/model/249871-sys-peglock-locking-pegboard-system Improved from remixed version so back sits flush to pegboard and caliper is held further back.

Pobrania
402
Polubienia
42
Ocena
5
P
PrintablesDonovan Baarda

Sy's Peglock - Parametric Pegboard Attachment.

This is a remix of @ntressler7's excellent Peglock Board Attachment - Parametric Template , which was a remix of @SyberSpace's excellent Sy's Peglock - Locking Pegboard System . The triangular wedge shape is mostly unchanged and will work…

Pobrania
402
Polubienia
91
Ocena
0
P
PrintablesStellasFun

Sy's Peglock - Curved Thin Hook

This small curved hook - split into two interlocking parts for optimal orientation and strength - is modified from the original to better hold tools or other large parts above it. The base part is identical to that from the Thin Hook…

Pobrania
388
Polubienia
37
Ocena
5
P
PrintablesVickash

Sy's Peglock Simple Bin

A simple storage bin that attaches to a pegboard with Sy's Peglock system. Requires one pegboard attachment. 2 Sizes (external dimensions): 120mm W x 42mm H x 80mm D 120mm W x 42mm H x 50mm D Internal dimensions are -4mm in width and…

Pobrania
384
Polubienia
50
Ocena
5
P
PrintablesRileyEnginerd

Negative Boolean Body for Sy's Peglock

I have become a tad bit obsessed with this peglock system, and made myself a solid body to boolean subtract from any model in order to use the universal board attachment. Add this STEP file body into any model, use a subtract/remove…

Pobrania
343
Polubienia
46
Ocena
5
P
PrintablesStellasFun

Sy's Peglock - Wire Snips

A hook with magnet above that connects to pegboards. Should work for many designs of snippers and pliers, but I designed it for Kobalt brand small wire snippers. This model uses my locking pegboard mount system for 1" standard pegboards.…

Pobrania
332
Polubienia
33
Ocena
5
P
PrintablesGiulio Librando

Sy's Peglock - Tape Holder

A tape holder for the sy's peglock available in 3 different sizes (30mm, 40mm, 50mm)

Pobrania
319
Polubienia
34
Ocena
5
P
PrintablesVickash

Sy's Peglock Minimal Plate

This version of Sy's Peglock plate removes as much material as possible, apart from the dovetail interface itself. Provided as STP and STL so the interface can be integrated into custom attachments.

Pobrania
299
Polubienia
38
Ocena
5
P
Printablescolin725

Peglock Hammer Extra Secure

Holds a hammer, remixed from citizen458931's hammer mount but adds some extra supports and a front lip to ensure the hammer doesn't fall. My hammer is pretty high up and near my printer, so wanted to make sure this was extra safe. Uses…

Pobrania
298
Polubienia
24
Ocena
0
P
PrintablesVulpinePrints

Swanson's Speed Square Holder - Sy's Peglock

Sliced in Bambu Studio. Printed at 15% gyroid infill on Bambu Lab A1 using default profiles for printer & PLA High speed. Printed at full speed. Thanks to Stellasfun for the amazing Sy's Peglock - Locking Pegboard System and Gherkin for…

Pobrania
284
Polubienia
34
Ocena
5
P
Printablescitizen458931

Sy's Peglock - Hammer

Holds a hammer. I printed at .3 layer height fine. You can go lower if you wanted smoother curves.

Pobrania
270
Polubienia
22
Ocena
4
P
PrintablesSkooter

Sy's Peglock Hook Remix

The diameter of the hooks, angle of the top hook, and lengths of the hooks are slightly altered to fit 1" pegboards better; specifically the Harbor Freight 48" workbench and generic metal pegboards on Amazon. It maintains the original 1"…

Pobrania
266
Polubienia
38
Ocena
5
P
PrintablesStellasFun

Sy's Peglock - Folding Hex Keys

A lightly angled mount made to fit a Kobalt brand folding imperial hex key set. Likely to fit any similarly sized tool. Base of holding area is 22mm deep and 40mm wide. Should hold items up to 120mm tall before they do not rest properly…

Pobrania
248
Polubienia
21
Ocena
5
P
PrintablesStellasFun

Sy's Peglock - Small Needle Nose Pliers

A magnetic mount for small “yellow” needle nose pliers. This model uses my locking pegboard mount system for 1" standard pegboards. Magnet holes (if present) are designed for 10mm diameter, 3mm thick magnets. “Board Attachment” parts are…

Pobrania
244
Polubienia
20
Ocena
5
P
PrintablesGerkins

Mallet Holder (Sy's Peglock System)

Remix of the hammer holder. Holds a mallet. Utilises Sy's Peglock System Print Settings Printer brand: Creality Printer: Ender 5 pro (stock) Rafts: No Supports: No Resolution: 0.2mm Infill: 50% but choose what you want. Material: eSun PLA+

Pobrania
242
Polubienia
23
Ocena
0
P
PrintablesLabrat_1023

Sy's Peglock - Template Plate Versions plus Onshape CAD

These are some handy versions of Sy's Peglock template plate that make remixing easier and more flexible. I derived it from their original .stl so hopefully I got all the features correct. Same print instructions: 3 perimeters and ≤0.3 mm…

Pobrania
240
Polubienia
34
Ocena
0
P

Sy's Peglock - Dewalt 12-20v Charger DCB112 Pegboard

Changed my design to use the Sy's peglock system which is better pegs and more modular

Pobrania
238
Polubienia
34
Ocena
5
P
Printablesw33ble

Combination Wrench Peglock Pegboard Holder, Reduced

I really liked the design of the original, but it's a little too big for my tastes. I would have liked to make all the surfaces thinner but I lack the CAD skills, so I just removed a bunch of the back plate. Little faster printing and…

Pobrania
234
Polubienia
23
Ocena
5
P
PrintablesBrewerSeth

Sy's PegLock - Pen and Pencil Holder

A pencil and pen holder using the Sy's Peglock system. Fits 1 pencil (9mm), 2 markers (12mm) and 2 construction pencil (15mm x 7.75mm). Print Details: Voxel PLA .25mm Layer Height .40 Nozzle 3 Perimeters 10% infill

Pobrania
220
Polubienia
20
Ocena
5

Bosch 18V Battery Holder - Sy's Peglock

Overview Are you tired of your power tool batteries cluttering up your workspace? Look no further! Introducing the Non-Locking 18V Bosch Battery Mount , a sleek and functional solution to keep your Bosch 18V batteries organized and easily…

Pobrania
216
Polubienia
8
Ocena
0
P
PrintablesGerkins

Large hook (Sy's peglock system)

Printer brand: Creality Printer: Ender 5 pro (stock) Rafts: No Supports: No Resolution: 0.2mm Infill: 20% but choose what you want. Material: eSun PLA+

Pobrania
213
Polubienia
17
Ocena
4,5
P
Printablesmentalflossed

Sy's Peglock - Staple Gun Holder

A staple gun holder for pegboards using Sy's Peglock system. This model uses my locking pegboard mount system for 1" standard pegboards. Magnet holes (if present) are designed for 10mm diameter, 3mm thick magnets. “Board Attachment” parts…

Pobrania
210
Polubienia
23
Ocena
5
P
PrintablesNottingham82

clamp holder sy's peglock compatible

remix of a clamp holder for pegboard using the sy's peglock system. I used labrats subtract model. unknown if this works or not. My first print failed. I'll try again this week. shouldnt need support Ok I printed it in abs. Worked as…

Pobrania
206
Polubienia
19
Ocena
5
P
PrintablesGerkins

Combination square holder (Sy's peglock system)

Print Settings Printer brand: Creality Printer: Ender 5 pro (stock) Rafts: No Supports: No Resolution: 0.2mm Infill: 30% but choose what you want. Material: eSun PLA+

Pobrania
203
Polubienia
27
Ocena
5
P
Printablesstewe

Sy's Peglock – One-Handed Paper Roll Holder

Inspired by the "One-handed removable paper roll holder kitchen wipe tissues" from Barebaric, I designed my version to work with "Sy's Peglock - Locking Pegboard System", a 25mm pegboard and a roll length of 260mm. For the assembly, 4…

Pobrania
200
Polubienia
36
Ocena
5
P
PrintablesAllen Robinson

Sy's peglock - deburring tool holder

A deburring tool holder for Sy's peglock . OnShape source: https://cad.onshape.com/documents/bc3d23cc71ba5ea362b902fd/w/f037dd204b781e442ed20a19/e/06c4441952325226e8cf2676

Pobrania
198
Polubienia
20
Ocena
0
P
PrintablesMisterPl0w

Sy's Peglock Dewalt Powertool Holder

I only know Tinkercad (for now) so I used that to mash the following two awesome models together: Dewalt Power Tool Skadis Sy's Peglock Locking Pegboard System I don't own the Skadis - I have a more typical pegboard in my workshop - and…

Pobrania
196
Polubienia
20
Ocena
0
P
PrintablesMJM

Sy's Peglock - Milwaukee M18 125mm angle grinder

A 125mm angle grinder mount that uses Sy's Peglock system. (Printed without supports)

Pobrania
190
Polubienia
14
Ocena
0
P
PrintablesBlackpony

Large Cup for Sy's Peglock

Large Cup for Sy's Peglock in 2" 3" and 4" Heights Picture is of 4" tall cup.

Pobrania
187
Polubienia
17
Ocena
5
P
PrintablesVickash

Sy's Peglock WD-40

This holds standard 68mm diameter cans for WD-40 products. The cutout's inner diameter is 69mm, for a loose fit, and is only 17mm deep. This minimizes the vertical clearance required to insert or remove a can.

Pobrania
184
Polubienia
21
Ocena
4
P
PrintablesIan Dunn

Sy's Peglock Shelf and Bin Set

A small shelf, and a set of small bins designed to work with Sy's Peglock system - sized for hobby and craft supplies. Simple, sturdy, efficient, and no supports required.

Pobrania
182
Polubienia
26
Ocena
0
P
PrintablesHawkeye0554987

Peglock Pliers Rack

Remix done in Shapr3D

Pobrania
181
Polubienia
22
Ocena
5
P
Printablesnmumphrey

Starrett 12" Combination Square Pegboard Holder -- Sy's Peglock Board

After running into this pegboard system: https://www.printables.com/model/249871-sys-peglock-locking-pegboard-system/files I had to create some new variations in cad to hold some of my woodworking tools. So I decided to make a holder for…

Pobrania
181
Polubienia
21
Ocena
4,5
P
PrintablesBrewerSeth

Sy's PegLock - Tool Holder

Using Sy's PegLock interface, this is a simple plate to hang tools. Pylers and tools with a belt clip work great on this. Made in TinkderCad: https://www.tinkercad.com/things/9aLnnECVdyD Print Details: VoxelPLA .25 mm Layer Height .40 mm…

Pobrania
176
Polubienia
22
Ocena
3
P
Printablesstewe

Sy's Peglock - Negative Body Template

This is a negative body of Sy's Peglock Plate. It can be used to be subtracted from your model, to get a perfect cut-out for Sy's Peglock Board Attachment. It also has a protruding block in order to allow the template to be positionied…

Pobrania
166
Polubienia
19
Ocena
5
P
Printables4AM_365

Wall Control Pegboard Bracket for Sy's Peglock System

Just a simple adaption. When you think it's fully seated - press it firmly and it will click into place.

Pobrania
160
Polubienia
19
Ocena
0
P
Printablesstewe

Sy's Peglock - Board Attachment for 25mm Metal Pegboard

This is a remix of “Sy's Peglock - Locking Pegboard System”, with som modifications inspired by “Sy's Peglock - Parametric Pegboard Attachment” of Donovan Baarda. It works with Sy's original mounting plate. The hooks are designed to best…

Pobrania
159
Polubienia
21
Ocena
5
P
PrintablesBlackpony

Small Cup for Sy's Peglock

Small Cup for Sy's Peglock in 2" 3" and 4" Heights Picture is of 4" tall cup.

Pobrania
150
Polubienia
16
Ocena
4,67
P
PrintablesBrewerSeth

Sy's PegLock - Universal Caliper Mount

Remix of Universal Caliper Mount to include Sy's PegLock interface. Print Details: VoxelPLA .25 mm Layer Height .40 Nozzle Size

Pobrania
149
Polubienia
17
Ocena
5
P
PrintablesStellasFun

Sy's Peglock - Pegboard Bridge

This plate is designed to connect together multiple pegboards. This adds additional strength for large pegboards that only have support around the edges like the one pictured. The plate in the photos has a school logo on it, but I've only…

Pobrania
144
Polubienia
17
Ocena
5
P
PrintablesBrewerSeth

Sy's Peglock - Stud Sensor Mount - Zicron L50

PegLock system by Sy's. This is a remix to hold the Zicron L50 stud finder. This is a nice fit with a slight squeeze at the bottom to hold the tool in place. https://www.zircon.com/tools/studsensor-l50/ Print Detials: VoxelPLA .25 mm…

Pobrania
143
Polubienia
16
Ocena
0
P
PrintablesStellasFun

Sy's Peglock - Allen Key Set

This two part mounting plate glues to a Tekton metric Allen key set and provides magnetic mounting to a pegboard. I used 6 magnets - 2 in the Allen key side and 4 in the pegboard side. This model uses my locking pegboard mount system for…

Pobrania
141
Polubienia
31
Ocena
5
P
PrintablesMike Anderson

Sunlu S2 Pegboard Wall Mount - Sy's Peglock

Remix for the Sunlu S2 mount but for a 1" pegboard using the absolutely fantastic Sy's Peglock System. Also have added a small recess for an air gap spacer if needed Optional screw holes have been added on the bottom. The feet of the S2…

Pobrania
139
Polubienia
25
Ocena
5
P
PrintablesLadPack91
Pobrania
138
Polubienia
18
Ocena
5
P
Printablescode3

Sy's Peglock - LTT Screwdriver

Adapted Eltord's LTT Screwdriver Hanger to work with Sy's Peglock. Requires "Board Attachment (Universal)" from “Sy's Peglock - Locking Pegboard System.”

Pobrania
138
Polubienia
17
Ocena
4,67
P
Printablesigloopup

Sy's Peglock - simple medium shelf for pegboard - L85xW65

Simple medium shelf. Dimensions W:85mm, D:65mm. Prints with no supports. Works well with PLA and PETG. If this was in a hot garage I recommend PETG which will hold up better to high temperatures. Additional necessary components You also…

Pobrania
137
Polubienia
18
Ocena
0
P
Printableseh-kaspar

Peglock - Miluakee Fastback Holder

This is a Sy's Peglock compatible holder for a Milwaukee Fastback model 48-22-1903 knife (this is the larger/thicker fastback that has extra blade storage). There are two STLs, one holds the knife with the clip facing the back and the…

Pobrania
136
Polubienia
12
Ocena
0
P
Printablesvpxr

Sy's Peglock - WD-40 Can

Two sizes: 68mm diameter 58mm diameter Uses Sy's Peglock system: https://www.printables.com/model/249871-sys-peglock-locking-pegboard-system

Pobrania
136
Polubienia
13
Ocena
5
P
Printablesbooswig

Peglock Rail with multiple peglock slots for Pegboard Screwdriver Holder

As Jacob says in his description: This is the inch version of the rail. Sy is a genius and kaje's screwdriver holder is fantastic. Simple. Works. Genius. The screwdriver works so much better than other solutions where your screwdrivers…

Pobrania
135
Polubienia
62
Ocena
0
P
PrintablesDonovan Baarda

Sy's Peglock - Parametric Hooks.

This is loosely based on Sy's Peglock - Large Hook but parametric so you can create a wide variety of hook lengths and shapes to suit different tools. It can be used with my Sy's Peglock Improved and Parametric pegboard attachment or Sy's…

Pobrania
131
Polubienia
23
Ocena
0
P

Sy's Peglock - Angled Pegboard Single/Double Spray can holder

I needed to hang spray cans from my pegboard lower then where the pegboard ended. so i added a second spray can cup under the original one. And made it using the Sy's Peglock system since it's the best one i've found for pegboards.

Pobrania
130
Polubienia
14
Ocena
5
P
Printablesigloopup

Sys's Peglock - paint can bin

Pegboard bin that holds a single can of spray paint on a pegboard. The bin uses the Sys's peglock system of pegs to attach to different styles of pegboards. I include a 5 mm peg for 1 inch spacing pegboard common in US hardware stores.…

Pobrania
127
Polubienia
16
Ocena
5
P
PrintablesMJM

Sy's Peglock - Milwaukee M18 battery mount

A Milwaukee M18 battery mount that uses Sy's Peglock system. (Printed without supports)

Pobrania
123
Polubienia
17
Ocena
0
P
PrintablesAllen Robinson

Sy's Peglock - parametric bin

A configurable bin for Sy's Peglock. The bin's dimensions and wall thickness are configurable. There is a single mount point that is always centered along the bottom edge of the back face. Source:…

Pobrania
122
Polubienia
26
Ocena
0
P
Printablesherbert

Sy's Peglock - Board Attachment Variant

This Board Attachment needs less depth and can therefor be used with Pegboards mounted closer to the wall. It uses nearly the same depth as the metal ones shipped with my Pegboard.

Pobrania
120
Polubienia
14
Ocena
5
P
PrintablesTwoBigPaws

Sy's Peglock Board Attachment - Metal Pegboard (Pinnacle brand)

I optimised this for the Pinnacle metal pegboards from Bunnings. They are a tight fit, but just right as far as I thought. These are the specific settings (from @Donovan Baarda's parametric setup) Body Width - 6mm Pegboard Thickness -…

Pobrania
118
Polubienia
12
Ocena
5
P
PrintablesNottingham82

Ryobi Sy's Peglock 4ah battery holder

Added Sy's peglock to Jef's battery holder. Fits the high power hp 4ah and 4ah lithium standard battery updated 8-11-2023

Pobrania
117
Polubienia
12
Ocena
0
P
PrintablesTwoBigPaws

Pegboard Cup 70mm - Sy's Peglock system

A medium sized cup for a pegboard using Sy's Peglock system. Good for pens, pencils, X-ACTO knives and similar things.

Pobrania
116
Polubienia
17
Ocena
0
P
Printablesinfinityloop

Pegboard Chisel Holder (With Sy's Peglock)

Holds 5 chisels using Sy's peglock mounting system. Fitted for Narex Richters and mortising chisels but should fit other chisels as well V2 Is thicker since V1 seems to be bending after long term use

Pobrania
112
Polubienia
9
Ocena
0
P
PrintablesJacob Schlecht

Pegboard Screwdriver Holder - Peglock Rail

This is the inch version of the rail. The peglock is in the center of the rail, and it is stable on the pegboard with the peglock. Compatible with Sy's Peglock system.

Pobrania
111
Polubienia
20
Ocena
4,67
P
PrintablesNickG-S

Stanley Chisel Holder for Sy's Peglock System

Print with supports for the holder overhang.

Pobrania
110
Polubienia
12
Ocena
5
P
Printablesnmumphrey

Speedsquare holder -- Sy's Peglock Board

After running into this pegboard system: https://www.printables.com/model/249871-sys-peglock-locking-pegboard-system/files I had to create some new variations in cad to hold some of my woodworking tools. So I decided to make a holder for…

Pobrania
109
Polubienia
15
Ocena
5
P
Printableseh-kaspar

Peglock Tape Measure Holder Paramterized

This Sy's Peglock compatible tape measure holder can be customized to fit your tape measure, open the .3mf file in Fusion and go to Modify > Change Parameters to set the length and width of the tray. The linked 3mf file is a smaller size…

Pobrania
107
Polubienia
13
Ocena
5
P
Printableslo-tek-hi-life

Sy's Peglock - Dewalt 12-20v Charger DCB107 Pegboard

Remix of ari.mandjelikian's model to fit the DCB107 model, as it's hole spacing is 4" instead of 4.5" Sy's Peglock System compatible mount for DeWalt 12v/20v battery charger DCB107.

Pobrania
107
Polubienia
9
Ocena
0
P
PrintablesDonovan Baarda

Sy's Peglock - Parametric Loop Mounts.

This is vaguely similar to Sy's Peglock - Screwdriver but parametric so you can create a wide variety of loop sizes and shapes to suit different tools. It can be used with my Sy's Peglock - Parametric Pegboard Attachment or Sy's Peglock -…

Pobrania
107
Polubienia
16
Ocena
5
P

Sy's Peglock - Dewalt battery mount for pegboard

This is a better version of my Dewalt battery mount for pegboard using Sy's peglock system. the batteries don't latch, so it's an easy one handed operation. Made a single and double battery mount. Included are peglocks that work for me,…

Pobrania
106
Polubienia
17
Ocena
0
P
PrintablesDavey Doodad

Peglock - Hex Bucket (92mm)

See Sy's Excellent Peglock System for more great options. Printer: Bambu Labs P1P Filament: 1.75 Elegoo PLA+ Light Grey Slicer: Orca Nozzle: .4 Quality: .2 Suppot: None Infill: 15% Time: 2hrs 5mins

Pobrania
106
Polubienia
12
Ocena
0
P
PrintablesAllen Robinson

Sy's peglock - filament spool rack

A simple filament spool rack for Sy's peglock. Requires two ½'' diameter rods to run between the brackets. Standard wood dowel should be strong enough for short racks - I have 2' rods carrying 8x 1kg spools with minimal flexing. Onshape…

Pobrania
106
Polubienia
25
Ocena
5
P

Sy's peglock - Ryobi 18v Charger P117 mount

single peg or double peg plate, if you use the double peg, I recommend only using the ‘flat’ peg for Sy’s peglock hook on the bottom one, not the curved peg, to provide rotational support.

Pobrania
106
Polubienia
12
Ocena
0
P
Printablesawhildy

Sy's Peglock - Looser fit board attachment

I really liked Sy's Peglock system, but was tired of scratching and hurting my hands trying to remove the board attachment. I don't mind a little wiggle room, and I don't need my mounts to be so sturdy that I can't move them. So, I scaled…

Pobrania
99
Polubienia
12
Ocena
5
P
Printableshmqgg

Gridfinity Base for Sy's Peglock

Bring Gridfinity to Pegboard/Sy's Peglock system (for metric 25mm pegboards). To mount on board, you'll need 2 Board Attachment, I recommend Sy's Peglock - Parametric Pegboard Attachment. by Donovan Baarda. Print Settings Support: No

Pobrania
95
Polubienia
11
Ocena
5
P
Printablesw33ble

Hex Key with handles Peglock holder

Created in Orca Slicer and exported as a generic 3MF file. Includes Metric and SAE models, as well as the require Peglock board attachment pieces. You can remove and modify models as you wish in your slicer. If you have a pegboard other…

Pobrania
95
Polubienia
10
Ocena
0
P
Printablesmartinwazhere

Sy's Peglock-Tray Shelf

I love the Sy's leglock system. I could not find the shelves I wanted. So I made them and love them! They are strong. They have a lip on the front to keep items in place and can hold various items. I created three versions: A small one (…

Pobrania
93
Polubienia
11
Ocena
0
P
Printablesnmumphrey

Starrett 6" Combination Square Pegboard Holder -- Sy's Peglock Board

After running into this pegboard system: https://www.printables.com/model/249871-sys-peglock-locking-pegboard-system/files I had to create some new variations in cad to hold some of my woodworking tools. So I decided to make a holder for…

Pobrania
93
Polubienia
16
Ocena
0
P
Printablesigloopup

Sy's Peglock - sturdy bin 80x80x80

Simple and sturdy bin. Internal dimensions W:80mm, D:80mm, H: 80mm. Prints with no supports. Additional necessary components You also need to print the right “peg” for your particular pegboard. I include the file for a typical “Home…

Pobrania
91
Polubienia
12
Ocena
0
P
PrintablesDavey Doodad

Peglock - Scott's Towel Vertical Holder

Printer: Ender 3 V1 + Hemera direct V6 hotend Filament: 1.75 Elegoo PLA+ Light Grey Slicer: Orca Nozzle: .4 Quality: .2 Suppot: None Infill: 30% Rectinlinear See Sy's Excellent Peglock System for peg options.

Pobrania
90
Polubienia
8
Ocena
0
P
PrintablesBenjamin Martin

Peglock Drill Impact Driver Mount for Makita and Others

3D Printed Peglock version of a standard pegboard mount that I used to mount my drills. Requires supports to print. Compatible with 1" pegboard. Two models are included, the drillholderasm.stl should work with most green Makita tools. The…

Pobrania
86
Polubienia
7
Ocena
5
P
PrintablesVickash

Sy's Peglock Screwdriver Holder (Medium)

Description Generic pegboard holder for medium sized (eg. #2 Phillips/JIS) drivers, compatible with standard 1" x ¼" hole pegboard. Front opening (max blade diameter): 8mm Hexagonal cutout for handle: 23.8mm between flats, 4.5mm deep This…

Pobrania
84
Polubienia
10
Ocena
5
P
Printablesartomweb

Sy's Peglock Gridfinity 1x3 with shorter back

I found that the dovetail on the back had an excessive height that blocked the holes above. This one has a shorter back. There is a support running between the two locking plates.

Pobrania
84
Polubienia
11
Ocena
5
P
PrintablesDonovan Baarda

Sy's Peglock - DIN Rail Attachment.

This is a remix of my Sy's Peglock - Improved and Parametric model that was a remix of @ntressler7's excellent Peglock Board Attachment - Parametric Template which was a remix of @SyberSpace's excellent Sy's Peglock - Locking Pegboard…

Pobrania
83
Polubienia
22
Ocena
0
P

Sy's Peglock - Dewalt 20V battery mount for pegboard

Dewalt battery pegboard mount using Sy's pegboard system

Pobrania
83
Polubienia
16
Ocena
5
P
PrintablesHawkeye0554987

Peglock Snap Fit Metal Pegboard

This is a peglock piece adapter for snap fit on metal pegboards. Printed with .6 nozzle at .2 layer height using PETG.

Pobrania
81
Polubienia
10
Ocena
0
P
PrintablesTorsoReaper

Sy's Peglock - Ikea Skadis Remix

I modified Sy's original design to work with Ikea Skadis pegboards

Pobrania
80
Polubienia
15
Ocena
0
P
Printablescode3

Sy's Peglock - Friction Held Small Needle Nose Plier

I made this for the needle nose pliers that came with the Prusa MK4. This model relies on the spring force of the pliers to stay in place. I wanted something like…

Pobrania
75
Polubienia
8
Ocena
0
P
Printablesigloopup

Sy's Peglock - simple bin for Bondhus allen keys

Simple bin that fits a set of Bondhus allen keys with their holder. External dimensions W:57mm, D:35mm, H: 84mm. Prints with no supports. Additional necessary components You also need to print the right “peg” for your particular pegboard.…

Pobrania
74
Polubienia
9
Ocena
0