Wyniki wyszukiwania: emo

Bookmark demon hands

support needed coz of claws. i printed mine on 0.15 but on 0.2 will look great also. Orginal Link: https://www.thingiverse.com/thing:5222826

Open source SpaceMouse - Space Mushroom remix

Update: V2 is much smaller! V1, named ‘Bigfoot’ by those commenting here, had the majority of its development dedicated to troubleshooting code, with the CAD being a first attempt. V2, which I'm calling ‘Mini-ish’, inverts the joysticks…

Removable trolley coin EU/US/CA/AU/UK/CZ/PL/IL shopping cart coin

Update 19-Nov-2024 : Added IL version Update 02-Apr-2024 : Added CZ version A removable trolley coin for EU/US/CA/AU/UK/CZ/PL/IL carts. This allows you to remove the coin after unlocking the trolley for your shopping. Although there are…

Shower Drain Cleaner / Snake - Hair Remover Tool

Keep your drains clean with this simple but super-effective 3D printable drain cleaner snake! Designed with fine hooks and a slim, flexible profile, it easily slides through most drain grates to grab hair and debris — no need to remove…

Mewtwo Pokemon

A 3D scanned statue of Mewtwo. Requires supports around the tail, hand and best case also between the legs. Printed with PLA at standard Prusa settings for MK3S at 0.2mm!

Cute Pokemon Pot Plants - Pikachu, Bulbasaur, Charmander, Squirtle

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Brim needed Scale it as you like :)

Modern Soap Dish with Removable Collection Tray

I decided to have some fun with the Soap Dish challenge, and design something that hit both the form and function while being incredibly easy to print - and I like how it turned out enough that I'm going to use this in my own home! I…

Cubone Pokemon Skull Keychain (Remix)

I printed in PLA Infill: 15% Layer Height: 0.20mm Brim: Yes Supports: Yes, organic Check another version: https://www.printables.com/model/1068118-cubone-pokemon-skull-lowpoly-keychain-remix Check my latest design for Christmas…

Hex-Grip Bed Scraper – Print Removal Tool

🔥 UPDATE: V2 NOW AVAILABLE! An improved version (V2) featuring new side-grip grooves for better control is now out! 👉 Get the new V2 version here: This is a bed scraper / print removal tool designed to safely and efficiently remove prints…

Earbuds Cleaning Tool V2 – Durable & ergonomic earwax remover for in-ear headphones

Intro Earbuds Cleaning Tool V2 is a small, easy-to-print earwax remover tool for in-ear headphones and earbuds . It helps you safely remove earwax, dust and debris from your earbuds without damaging the speaker mesh . The first version…

Bulbasaur - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed No Brim needed Scale it as you like :)

Demogorgon - monster from the movie Stranger Things

Hello, Today I have Demogorgon for you - a monster from the movie Stranger Things. It is a really faithful copy of the famous monster from the movie. It is also suitable for coloring, or for a diorama with the theme of the upside down…

Tick Removal Coin

Hi, this is the tick removal coin. Unfortunately, there are a lot of ticks in the area where I live, which is why I designed this tool. With these coins, you always have a tool at hand to help remove ticks. You simply push the coin over…

Pikachu - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed No Brim needed Scale it as you like :)

Otto DIY Emotional LED eyes robot

The most emotional robot ever of the Otto family is back!. Thanks to our own developed LED “Eyes” combined with all te dance moves, touch sensor and sound gestures of all the other Ottos. you will be able to program your STEM robot to…

Poop Emoji

Poop Emoji

Pokemon Snorlax Single Extruder - Dual Color

I would appreciate a lot if you could support me giving a like and downloading, thank you guys. You can also visit my profile and suport my other 3D models. Check out my latest models:…

CHARGING PORT DUST REMOVER - USB-C CLEANER - (Tested)

Also tested with other charging ports Inspired by the box openers

Bobby Pin Demo Print

When I read the blog post for the “Quick and Useful Prints” contest I saw it as a cool opportunity to design a Maker Faire booth demonstration print and giveaway item. One of my favorite memories from my first Maker Faire was getting…

Oddish - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)

JigglyPuff - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)

Pokemon Logo Plaque

Description Kid request… This is just a decorative plaque featuring the Pokemon logo. I have included 2 gcodes. The first is a 1 color print. The second is a 2 color print that does not require an MMU, only a color change. STL also…

Nemo

Nemo

Charizard - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)

Rock Remote Holder

Rock Remote Holder Keep your space tidy with this rock-style remote holder , a decorative organizer that blends perfectly into your home while keeping your essentials within reach. 🪨 Designed to look like a natural stone, this model hides…

Dirt Remover for Lightning / USB Type C / Mini-USB

Simple Idea but big help! SINCE 2021 → I'm the original Inventor of this idea! Easy to print, ready for cleaning in 5 minutes. easy, safe*, reliabe and sustainable. Use PLA or PETG. Infill doesn't matter. Layer high 0.1. *Don't push to…

Anemometer with Hall sensor and magnet

I created this simple and (almost) fully printed anemometer for students in local high-school programming classes. 3D printed parts (PETG): Top dome Top core (this is where a small magnet is placed) Bottom body (this part contains a Hall…

Can YOU remove the ring??? (includes solution!)

This is a medium-difficulty puzzle that I enjoyed solving many years ago! The goal is to remove the center ring. No force is necessary. I designed it primarily in Fusion 360. I printed it with Reprapper grey and Atomic purple PLA. Note…

Pokemon Chess MMU remix

You can print one set in proper colors and the other in shiny versions - or dont, I'm not even your real dad.

Pokemon card 3D box

Box for pokemon card 3D effect

Play-tested Pokemon on Platforms

After printing some Pokemon sitting on rather flat platforms it became clear that this wasn't suitable for the balance game. My kids thought they were cool but gave up on the game and just played with the figurines. So I set upon making…

Pokemon Card Box (No MMU)

The lower part of the box is as simple as it gets. just hit print and voila! I print at 0.2 layer height and the pokemon logos on the sides come out great. The multi colored lid on the other hand requires supports and color changes at the…

Sussie Magpie : Kpop Demon Hunters

Sussie : Kpop Demon Hunters. Magpie I was going to put this in Myclub but I lost my eye and rushed it and then gave up. So I will leave it here. Lots of missing details… and the legs are cattywampus… the ridge line bothers me. But I just…

Removable shopping cart coin

Unlock and Go! 🛒 The ultimate shopping hack. Insert, unlock, and remove - no more searching for change or leaving your keys hanging from the cart. Precise clone of the official manufacturer's key. Works perfectly with 1€ carts. Perfect…

Roku Remote RC-EL3 Battery Cover

Battery Cover replacement for Roku Ultra remote model RC-EL3 Print horizontally with curve up, requires supports. This will reinforce the locking tab. Be careful when removing supports to not damage the bottom alignment tabs.

Easy Print Chromecast Remote Hard Case

A Fun and easy to print hard case remote for your Chromecast with Google TV. Designed for 0.2mm layer heights and prints with no supports. Does a great job preventing accidental volume changes!

Scraper – All Versions: Effortless 3D Print Removal

As mentioned above, this handy tool helps you effortlessly remove your 3D print from the heat bed—because let's be honest, nobody enjoys the struggle of peeling off prints like they’re stubborn stickers. It’s also a lifesaver when your…

Box for ESPSomfy-RTS remote

This box is designed to enclose an ESPSomfy-RTS remote, an ESP32 based project allowing you to control Somfy shades over WiFi or via HomeAssistant (see YouTube video ). The case can also be used for any radio project consisting of an…

Squirtle Pokemon funko POP!

Print & acrylic draw

Meowth Pokemon Go

Meowth Pokemon Go

B2EMO : Andor : Star Wars Droid

B2EMO : Andor : Star Wars Droid. This has been available for a few years now -→ buried as an add on option in another model of mine. Hilarious. I spent 20 minutes looking for it thinking that It was posted as a stand-alone. Nope.

Walther PPK With Removable Silencer

LED Light Remote Holder: Organize Your Lighting Controls with Ease

LED Light Remote Holder: Organize Your Lighting Controls with Ease Product Description: The LED light remote holder is the perfect accessory to keep your LED light remotes organized and easily accessible. Designed to fit the remotes for…

Samsung Remote Holder BN59-01301A Flat back

I Wanted to double sided tape it so I needed a version without the reinforcement behind. So I've slice it in PrusaSlicer. And I've print it at 102% (When you play with scale more than once in prusaSlicer this scale add up! be sure to…

collectible card box (Pokemon, Magic, Baseball)

Cardbox with dividers. no supports needed.

Tesla Model 3/Y Center Console Tray with removable divider

Console tray based on zrides' center console design (thingiverse) with the following changes: removable divider radius added to all inner corners for easier dirt & dust removal outlets for usb charging cables added Printed for Tesla Model…

Apple Corer Remover with detachable handle

The remover has no blade it uses some little PETG teeth as a saw. You can print the handle and the remover in different colours and after that you can screw both parts together. The 10 mm screw ist well protectet. It is a PETG "appliance"…

Pokemon Go Plus+ Pokemon go plus plus

I myself designed this device to aid in catching the pokemons Maybe you too, would like to catch the pokemons I printed at .15 mm layer height with organic supports I eliminated my speaker to make room Link to micro switch → Switch There…

Wemos D1 Mini Case

I've designed this tiny case for the easy use of led strips, the three pin connector is for the strip, the microcontroller is powered over the led strip. What you need additionaly: a pair of M2 x 8 or M2 x 10 or M2 x 12 one JST XH-3P-M…

Removable Shopping Cart Coin: A Convenient Tool for Your Shopping Needs

Removable Shopping Cart Coin: A Convenient Tool for Your Shopping Needs Product Description: The removable shopping cart coin is an essential tool for your everyday shopping trips. This cleverly designed keychain not only holds your keys…

Bosch eBike Charger Wallmount (added removable plug)

This print allows to elegantly mount your Bosch eBike Charger to the wall, out of the way, right where you need it. I made this version because several people indicated that they liked my eBike Charging Station but preferred a standalone…

Ikea Skadis LED Remote Holder

Very basic remote control holder for the Ikea Skadis. If you print it, and it works for you, please rate it, like it and post a make, that would be highly appreciated!

Geodude - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)

Gastly Pokemon - Multipart

A quick, simple model based on the Pokémon Gastly, made from scratch in Fusion. It's very easy to print, and comes with some alternative versions: Eyes Blank (draw your own with marker). Ideal if your printer can't do the small pupils, or…

Board for development with Arduino Uno, RPi4B, ESP8266 Nodemcu, Wemos D1 Mini

I constructed this board to hold the above mentioned controller for development purposes. The part was printed with PLA with a layer of 0.3 mm. Any other filament works too. No rocket science. Step file included. F360-file on request. The…

Fast Print ESP32 WEMOS S2 Mini Case with Buttons

You absolutely need to use arachne/variable extrusion width to print this. The outer walls vary from 0.38-0.6mm to provide the snapping action for the lid while still using only 1 “perimeter” to allow fast printing. The reset and…

Wii Remote Handle’s

Wii Racing Handle This is to help those who have trouble gripping the Wii remote, and can be used as a steering wheel addon for Wii racing games! It should be printed at 0.20mm or better, and at 5% or more infill, All that’s needed for…

Ear Saver Emoticone 2

Just an interpretation for the ear saver

Realistic Pokemon Pikachu

Hello, Welcome to my profile, full of models and miniatures :-) I have Pokemon Pikachu for you. It is really nice and realistic, suitable for coloring. It prints really well. I used PLA/PETG Basic as the material No need to use supports…

DJI Mavic Air 2 remote Quadlock adapter

My Quadlock casing for iPhone is too fat for DJI Mavic Air 2 remote to hold. So I made an adapter - a plate with Quadlock adapther that hold my phone. My first project with Fusion 360 and first print of something that I designed by myself.

LED / RGB Remote Holder

Recently I received some strips of RGB lights. A few days after putting them up I found myself loosing the remote quite often. I needed a simple, good looking, remote holder to stop me losing the remote in future. I hopped online and…

Cubone Pokemon Skull Lowpoly Keychain (Remix)

I printed in PLA Infill: 15% Layer Height: 0.20mm Brim: Yes Supports: Yes, organic If you like my work consider Buy me a coffee 😊

Couch Armrest Drink Holder / Phone Stand / Remote Holder: For Cloud Couch / Lovesac / Large Sectional

TWO SIZES NOW INCLUDED. Drink holder + phone stand + remote holder for any large/wide sectional or couch armrest or back of the couch. The non-remote side is easily narrow enough to go between your sofa and the wall). I know that it fits…

Removal Tool for Oven-Lamp glass Neff / Siemens

This is a printable model of a removal tool for a round oven-lamp cover glass with 68mm outer diameter, and 44mm height, used in various ovens by Bosch, Siemens, NEFF, … On some ovens from the BSH Group (Bosch, Siemens, NEFF, …), the…

WeMos D1 mini Enclosure

I designed this enclosure for my project "Temp2IoT". It can be equipped with a WeMos D1 mini and provides cable outputs for a USB cable for power supply and another for a DS18B20 temperature sensor. After assembling the two parts of the…

Photo Card Holder | Picture Frame | Kpop & Pokemon Collectible Cards

Present and display your collectible photo cards in these elegant picture frames Prints without support due to multi parts click connect design 75° angled to mitigate reflections 56mm x 88mm maximum size of the card Separate inner frame…

Demonstration Bevel Gears (2 to 1 Ring to Pinion Ratio)

A set of bevel gears where the pinions have half the teeth of the ring gear. This results in a 0.5 reduction in angular velocity from the drive gear to the free gear. The holes are designed for 8mm diameter shafts, and the free gear sits…

Ergonomic SpaceMouse Wrist Rest w/ Flexible 'Exoskeleton' (V2)

Original wrist rest design for the 3DConnexion SpaceMouse®. The ‘scales’ are printed as seperate parts and friction fitted to the main skeleton part. I also included a g-code version for the skeleton and scales on one plate. I included…

Amazon Fire Stick TV Remote Holder

Designed to be light and stylish, can be freestanding or wall mounted with a 3M Double Sided Sticky Pad (15mm x 15mm) Easy to print and shouldn't require a brim or glue, but that depends on your printer. Only 11g of filament needed,…

Cubone Skull Pot Plant - Pokemon Home Decoration

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)

Can packaging (vasemode)

PLA nozzle 0,4 layer height 0,25 vasemode I printed out colored rings for my daughter so she could put together her own version :-) . If there is interest, I will gradually add more textures

Gopro Hero 9 Lens remover

Tool for easy removal of the Gopro Hero 9 Lens

USB-C Dust Remover / Port Cleaning Tool

Designed to print with a 0.4 mm nozzle at a 0.1 mm layer height.

Tank Demolior Class Heavy - Deathhead II - Model Science Fiction

This is the Tank Demolior Class Heavy, “Deathhead II ” as inspired in book four of the “Mongruxx” Novels (Mongruxx Until We Cross This Bridge Again). For all of you SCI FY tread heads out there. Designed on Tinkercad, the chassis/Treads…

Pokemon Damage Counting Dial

Do you or your kids like to play Pokemon? Are you tired of having damage counters cluttering up your gaming surface and getting lost all over the floor? Then download and print this Pokemon damage counting dial. This dial counts in…

EMO robot shoe #1

EMO robot shoe #1 with a sneaker look. EMO seems to like them and seems to walk more silent now. The fall prevention sensors holes on the bottom of the feet are open and charging works too. Printing instructions: 0.3 draft profile used…

Hisense Roku Smart TV Remote Stand

A quick and easy to print stand for my Hisense smart Roku TV's remote that holds it up at 15 degrees off vertical.

Logitech Z906 Remote Control Holder

This is a remote control holder to fix on a aluminium extrusion of a simrig. You will need two M6 counter sink screws. If you like the print profiles, please consider rating them. Thanks :-)

Doraemon Anywhere Door 任意门 (Tabletop Miniatures)

The base isn't necessary when the door is kept in a closed position. Dimensions: Height: 16.4cm Width: 8.73cm Depth: 1.465cm Suggested print settings: Layer height 0.2mm. Infill 15%. Perimeters: 5 (for strength). Print-in-Place. No…

Propeller protector for Drone Pro/E88/E99/E58 - Nubs removed

A propeller/wing protector for the inexpensive Drone Pro/E88/E99/E58 drone. This drone is a knock-off of the toy quad-copter, the “Eachine E58”. You can easily find this USD $20 drone on marketplaces such as Temu and AliExpress. Tested…

LG Remote Stand

LG remote stand to hold remote vertical. This was designed with a 2017 OLED C7 series remote. This should work with many models / years. Features Weighted stand (add metal weights) Non-slip base (add furniture pad) Part Links Weights 3/8"…

Heartfelt Memories – Photo Frame

Frame your memories with love using our unique accessory, a heart shaped instant camera frame. Let each photo tell a tale of affection as it rests within the gentle curve of our Heartfelt Memories frame, adding a touch of romance to every…

Pokemon Card Sorter / Divider

Make organizing your Pokémon card collection easier than ever with this 3D-printed Pokémon Card Sorter ! Designed to help you quickly separate Holo, Rare, Reverse Holo, Promo, and more , this tool is perfect for sorting large amounts of…

Presta Valve Core Removal Tool

A quick and easy tool to remove the valve core on your Presta bike valve Uses a very low amount of filament Print settings don't really matter as tool doesn't require much force to remove the valve core, but i prefer to iron the top for a…

Japanese Elemental Air/Wind Demon Oni Mask - OniKaze

The third in the Japanese Elemental Oni series - see also InfernOni , TyphoOni , Little Sakura , Little Coral , Little Bramble Wear it or display it! Meet the OniKaze (OH-nee KAH-zay), fearsome spirit of the wind. Version from the photos…

Shopping cart coin key - removable

You can pull it out when the shopping cart is unlocked. Prints in PLA or PETG. Print settings: Nozzle: 0.4 Layers: 0.2

Removable Printer Bin

This is a bin that slots into the left frame extrusion on the Prusa i3 MK3S+. It is useful for catching scraps from the extruder as filament tends to drop between the heat bed and the left Z axis motor. It is designed to be easily…

Clefairy - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)

Pokemon Stand for Card Toploader

Show off your Pokémon cards in style with our Toploader Card Stand! Perfect for displaying your favorite graded or sleeved cards securely. Download and print your own stand today! Additionally, the logo can be printed separately without…

Famous Meme Emojis

Printable (2D) smileys. You can choose the size by scaling them up (recommended at least 200%) Add 1 color change (from yellow to black) at the right layer height. You can also download the .3mf file to get all STL's on your build plate…

Wemos D1 Uno (Arduino Uno) + 16x2 LCD keypad shield case - Bitcoin ticker

LCD control software on Github: https://github.com/janfitz/Arduino-Wemos-WiFi-keypad-shield-Bitcoin-ticker

IKEA VINDRIKTNING ESP8266 Wemos D1 Clip

IKEA VINDRIKTNING ESP8266 Wemos D1 Clip to fix an ESP to get the dust values from the device via WLAN. PLA - no supports - 100% infill

Holder for RGB-LED-Remote Control - "Mi-Light"

I do use an enforced support for the center part of the shell only. (see pictures)

Simple Honeycomb Note box / Memobox / Zettelbox

Nothing too complicated - just a box for loose stack of note papers. But it was useful practice task on modelling a hexonal grill in Inventor. Designed with inner space sized 90x90mm, can be easily scaled up or down for different papers.…

Amazon Voice/FireTV Remote w/Tile Replacement Cover V6

** Brand New Update! * FireTV w/Tile Remote Cover - Alexa Voice Remote version 6 or V6. I have updated the fit and finish completely and now it fits perfectly printed in PETG and PLA. This is a battery door replacement so you need to…

Renault VAB 6x6 Remote Controlled

This Remote Control Renault VAB 6x6 scale 1/10 is made of 109 parts printed on my i3 MK3. The biggest parts (front and back are about the size of the print area. The weight of material (ABS/PLA) is above 1Kg. The size of the truck is…

Spacemouse + Streamdeck mount

I created this model for my 3DConnexion Spacemouse Wireless and my Elgato Streamdeck. You find some other models on Thingiverse, but for my personal preferences they are too plain, and it feels not natural to use the Streamdeck buttons,…

Stan Lee Memorial Print Remix (3mf Ready to Print by TIXEN)

Stan Lee Memorial Print Remix (3mf Ready to Print by TIXEN) This is a REMIX from: https://www.prusaprinters.org/prints/1439-stan-lee-memorial-print made by Hex3d https://www.prusaprinters.org/social/4304-hex3d/prints .3mf Ready to Print…

EMO robot shoe #2

EMO robot shoe #2 with a sneaker look. EMO seems to like them and seems to walk more silent now. The fall prevention sensors holes on the bottom of the feet are open and charging works too. Printing instructions: 0.3 draft profile used…

Orange - Lemon - Lime

The bottom of the box and the coaster Start printing white, single layer of 0.20 Then print the box, or the coaster (first layer 0.3)