Liczymy pasujące modele…
What it is A compact tool to determine angles. It also includes a 120 mm linear scale and ring gauges from 1 to 9 mm in 1mm increments (clearance designed is 0.1 mm). What to print There are three parts awaiting you, which can be printed…
Wydruk około 2,06 €–2,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
There are numerous designs out there of clips that secure the lid on IKEA Samla (Filament storage) boxes. But I could not find any that really presses the slightly overhanging lid onto the box to keep it as air tight as possible without a…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Any feedback would be greatly appreciated . NOTE: Could try printing the case with ZERO top and bottom layers, perimeters: 8-10, honeycomb infill at 5-15%. Supports everywhere, style: grid, top Z distance: 0.25mm(for 0.2mm layer), top…
Wydruk około 2,64 €–3,23 € nettoWstępna wycena jednego wariantu
This is a scent training vessel for dogs learning or competing in scent work / nose work. You can place the scented object inside (such as a cotton swab infused with essential oils). There are two sizes to choose from (the original, 64 mm…
Wydruk około 2,14 €–2,61 € nettoWstępna wycena jednego wariantu
This is a scent training vessel for dogs learning or competing in scent work / nose work. You can place the scented object inside (such as a cotton swab infused with essential oils). Printing tips: Print the rock and cap as oriented in…
Wydruk około 2,43 €–2,96 € nettoWstępna wycena jednego wariantu
Messerteller für den Navimow i series. (getestet auf einem i105e, sollte auch für den i108e passen) 6 Klingen und 20cm Schnittbreite (original hat 3 Klingen und 18cm Schnittbreite) Benötigt werden neben den Klingen und den Schrauben nur…
Wydruk około 3,98 €–4,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Messerchmitt Bf 109 (also known as Me 109) was one of the most iconic aircrafts of the Second World War, and is across its variants the most produced fighter in history. It entered service in 1937 and was at the time seen as very…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
This is a scent training vessel for dogs learning or competing in scent work / nose work. You can place the scented object inside (such as a cotton swab infused with essential oils). The embedded magnet cutout is designed for a 12x1.6mm…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena jednego wariantu
A wall mount for rectangular bathroom scales. Attachable with adhesive strips. Multiple thicknesses available.
Wydruk około 5,91 €–7,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
NPT Pipe Plugs: Essential Protection for Pipes During Maintenance Looking for BSPP Pipe Plugs? You can find them HERE! Product Description: These NPT pipe plugs offer a simple yet crucial solution for protecting hydraulic and pneumatic…
Wydruk około 1,64 €–2,01 € nettoWstępna wycena jednego wariantu
Famous Planes Famous Planes is a set of airplanes in kit cards you have to build. Those are perfect gifts ! You can find the whole collection here 😊 ! Messerschmitt Bf 109 This is another plane for your collection : the Messerschmitt Bf…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
BSPP Pipe Plugs: Essential Protection for Pipes During Maintenance Looking for NPT Pipe Plugs? You can find them HERE! Product Description: These BSPP pipe plugs offer a simple yet crucial solution for protecting hydraulic and pneumatic…
Wydruk około 1,35 €–1,65 € nettoWstępna wycena jednego wariantu
Da bei meiner Homematic-Wetterstation ein Löffel vom Windmesser abgebrochen ist (gemäss meinen Kindern, hat der Ball diesen beinahe nicht berührt :-) ), habe ich eine neue Nabe und Windlöffel gezeichnet. Die Form und die Idee für die…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Im VW California bläst die Warmluft der Raumheizung aus einem Lüftungsgitter an der B-Säule unten. Das original Lüftungsgitter hat die Lamellen nach unten ausgerichtet, so dass sich die warme Luft schlecht im Bus verteilt. Bei diesem…
Wydruk około 9,96 €–12,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Multi color 3D print of the Tennessee volunteers logo T. Made this for my father while he was in town! He's a big vols fan. This could be a great Christmas or birthday gift. Perhaps even as an ornament?
Wydruk około 0,96 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Jesse Pinkman For Barbie. Sized for Barbie. He would be just about an inch shorter than barbie in real life so this should work on the Prusa Core One. On the Mark4 .. lets just say hes slouching. Leave your first date dialogue in the…
Wydruk około 11,57 €–14,14 € nettoWstępna wycena jednego wariantu
Inspired from other hexagon drawer systems, I created an OpenSCAD model that generates polygonal drawers. Unique tessellations are possible. For example a large octagon drawers connected by small square drawers.
Wydruk około 7,16 €–8,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Compact Hub to hold up to 8 Lego Spike Prime or Essential batteries. This was specifically designed for local school and the 8-port usb power strips they had. I have found an equivalent power strip at: https://a.co/d/2DvmCf6 Recommend…
Wydruk około 19,83 €–24,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hier habe ich eine neue Version für den Worx M700+ erstellt. UPDATE: V2 Slim zum Download bereit Er hat nun 7 Messer die mit einem zweigeteilten Messerteller verschraubt werden. Diese Teilung habe ich gemacht weil es damit einfacher zu…
Wydruk około 1,95 €–2,38 € nettoWstępna wycena jednego wariantu
Lady Jessica / Bene Gesserit
Wydruk około 9,56 €–11,68 € nettoWstępna wycena jednego wariantu
Even more important than the sport itself is the snacks and beverages, and that is why you need to make sure you got the right gear. This coaster set is easy to print and can be printed in any material. if you want to print them like me…
Wydruk około 4,35 €–5,31 € nettoWstępna wycena jednego wariantu
Servus, ein Cuttermesser braucht doch schließlich jeder somit war ich so frei und habe ein gezeichnet, für das zusammensetzten empfehle ich euch den 5mm Dübel über likes makes und follower würde ich mich sehr freuen, Peace MazZe
Wydruk około 2,60 €–3,17 € nettoWstępna wycena jednego wariantu
Einfache Halterung für Cuttermesser und/oder Ersatzklingen. Ich habe mehrere Modelle abgelegt. Man benötigt noch 2 Schrauben der Größe 3,5 mm zur Befestigung. Simple holder for cutter knives and/or spare blades. I have put down several…
Wydruk około 5,90 €–7,21 € nettoWstępna wycena jednego wariantu
Possessed Grand Piano
Wydruk około 13,92 €–17,02 € nettoWstępna wycena jednego wariantu
Cache - Plaque - Enjoliveur pour l'interrupteur de modèle Essensya de la marque Hager.
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Stand for essential oil bottles , designed to organize and display your collection in an elegant and decorative way. Its Art Nouveau–inspired design features ornamental curves and flowing details, combining functionality with a sculptural…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
Whether you're celebrating Phi (φ) Day or any other holiday, these organic Penrose tiles will be a conversation starter! Seriously, how many others will bring non-periodic tessellating cookies with fivefold rotational symmetry to your…
Wydruk około 1,50 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Requires Library https://www.printables.com/model/542305-updated-openscad-library-for-hsw-attachments
Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu
j'ai créer ce pommeau de vitesse car celui d'origine de mon Citroën Berlingo du a son Age commencé a partir en miette j'ai repris les côtes avec mon pied a coulisse et j'ai tous reproduit a l'identique afin de le fixer sil suffit de…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Es handelt sich um ein kleines und einfaches Modell eines Messers zum Öffnen des Packbands an Paketen und ähnlichem. Es ist 60 mm lang, 25 mm breit und 3 mm dick. Das praktische Loch zum Aufhängen hat einen Durchmesser von 6 mm.…
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Small tip to clip onto the end of a press tool for watch needles in place of the original tip. Printing Instructions: Recommended Settings: Use a layer height of 0.10 mm for an optimal balance between printing time and quality. Supports:…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Hey habe ein Neus Cuttermesser gezeichnet der Vorgänger war cool aber musste verbessert werden nun wird es stehen gedruckt dadurch wir die Funktionsweise stark verbessert gedruckt in PLA oder PETG mit 0,2mm funktioniert es am besten. Habt…
Wydruk około 3,40 €–4,15 € nettoWstępna wycena jednego wariantu
A simple calibration cube that is useful for the initial calibration of the printer. This is the best way to start a successful calibration and get successful prints. Print parameters Nozzle: 0,4 Supports: NO Material: PLA, PETG >> If you…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
The screw should hold the cover with the magnet Die Schraube sollte die Abdeckung mit dem Magneten halten
Wydruk około 1,11 €–1,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is replacement handle for the Bessey GTR 120/60 Guide Rail Standard Clamp (seems to be identical to Bosch Professional clamps for the FSN 70 or FSN 140). The original handle is simply round and therefore has very little grip. So I…
Wydruk około 2,28 €–2,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I kept damaging my Ethernet cable by bumping it with a nearby storage basket, so I wanted to find a wall plate that would recess the jack out of the way. None of the ones I found nearby fit Decora style wall plates, so I designed my own.…
Wydruk około 1,01 €–1,24 € nettoWstępna wycena jednego wariantu
A magent sized 30x30x6,89mm with the logo from a german soccer club (Rot Weiss Essen). In the BGCODE is a pause for a 15mmx2mm magnet and a colour change at the end for the logo finish. Printed on a Prusa Core One
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Ich fand es ein zu umständlich, die Halterungen auszubauen, dann die Schleifsteine zu tauschen um dann die Halterungen wieder einzusetzen. Daher habe ich mir neue Halterungen gedruck und muss nun nur noch die Halterungen tauschen. Die…
Wydruk około 2,27 €–2,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
What is it? Example of a standard duplex receptacle: https://www.homedepot.com/p/329118072 Example of a recessed duplex receptacle: https://www.homedepot.com/p/202066691 Print instructions: Orient flat side UP hollow RECTANGLE on TOP…
Wydruk około 19,28 €–23,56 € nettoWstępna wycena jednego wariantu
Eine Halterung für den Lechuza-Feuchtemesser (Artikel Nr. 19714). Die Befestigung kann mit 2 Schrauben Ø 2,5 mm oder mit Klebestreifen (z.B. Powerstrips) erfolgen. Für den Druck ist kein Support erforderlich. Translation: DeepL A holder…
Wydruk około 1,36 €–1,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Immer mehrere Werkstücke gleichzeitig drucken sonst Verzug-Genauigkeits-Spannkrafteinbußen! Stirnseite oben ist “gebügelt”, geeignet als Axialgleitlager, gute =geringe Reibwerte bei verwendung High Glossity Polymoph Filament und…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
Mit diesem schnell zu druckenden Teil, lassen sich die Cookit Zubehöre Universalmesser , Hackmesser , 3D Rührer und Rührbesen immer griffbereit magnetisch auf der Abzugshaube befestigen. Zusätzliche Teile: Es werden 3 kleine Magnete (6 *…
Wydruk około 1,19 €–1,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dieser Verschluss passt sicher nicht für alle Flaschen, kann in Maßen scaliert werden. Evtl. mit der Freecad- Datei geändert werden. Eine Dichtung ist sinnvoll.
Wydruk około 0,23 €–0,29 € nettoWstępna wycena jednego wariantu
Zum andrücken der neuen Bremsscheibe, damit der Planschlag zuverlässig gemessen werden kann. Geeignet für Radnaben mit nicht durchgängigen Gewindebohrungen
Wydruk około 1,11 €–1,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Extend ceiling lights to improve looks and resolve hole imperfections. Designed for 4" lights but can be adapted to fit any size with ease. FreeCAD model attached.
Wydruk około 1,96 €–2,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sonnenfilter für TS APO 100Q Dieser Sonnenfilter wurde speziell für meinen TS APO 100Q Refraktor entwickelt und in Prusament PETG gedruckt. Druckeinstellungen: Schichthöhe: 0,20 mm (SPEED) Material: Prusament PETG Stützen: Überall Infill:…
Wydruk około 1,50 €–1,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The added cutout makes it easier to remove the Speedmarker from the holder without risking damage to the plastic knurled
Wydruk około 1,50 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Der “Hobelheld” – Dein 3D-gedruckter Messerblock für Küchenhobel Ein Meisterwerk der Steinkunst (nicht wirklich, aber fast!) Überblick: Der “Hobelheld” ist der ultimative Aufbewahrungsblock für deinen geliebten Küchenhobel und seine drei…
Wydruk około 12,96 €–15,84 € nettoWstępna wycena jednego wariantu
This model is from the Nintendo 3ds Game: “Tomodchi Life.” I tried looking for these and say no one had made any I decided to make them myself. Right now I'm working on something big right now but my printer is not cooperating so expect…
Wydruk około 0,71 €–0,86 € nettoWstępna wycena jednego wariantu
I had printet it in PLA but other types are possible.
Wydruk około 1,11 €–1,35 € nettoWstępna wycena jednego wariantu
Space-saving holder for the trigger point presses from Liebscher & Bracht. The presses are made for acupressure and pain therapy. My wife doesn't have a proper place to store them. That's why I designed this holder for wall mounting.…
Wydruk około 6,12 €–7,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ein Buchblock aus losen Blättern im Format DIN A6 kann zwischen diesen Brettchen zum Verleimen eingespannt und gepresst werden. Durch die Aussparung zwischen den Standklötzchen kann der Buchrücken vor dem Verleimen eingeschnitten und…
Wydruk około 2,24 €–2,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ein Anzeigering für Gabeln mit einem Innendurchmesser von 35 Millimetern zum daranklipsen der auch aus PLA+ gedruckt werden kann
Wydruk około 0,03 €–0,04 € nettoWstępna wycena jednego wariantu
I have made a 3D version of the Buster Bloodvessel Bad Manners logo. My models are free but if you'd like to buy me a coffee that would be greatly appreciated. Thanks. 2 size 3mfs are provided and these have colour changes at two…
Wydruk około 2,71 €–3,31 € nettoWstępna wycena jednego wariantu
Falls der Schliesser im Wohnmobil (oder sonst bei anderen push to open Schubladen oder Türen), die mit einem Schnappmechanismus funktionieren, kaputt geht, kann man ihn hiermit wieder in Betrieb setzen. :-)
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
V2 IS HERE: https://www.printables.com/model/1152427-openvessel-20-a-practical-3d-printing-benchmark Introducing OpenVessel , a model designed from scratch to embody the true spirit of 3D printing: freedom, openness, and community.…
A truly extraordinary decorative object. A moon with a small bowl attached for flowers and decorations. Standard size: 230x230x90mm. Easily scalable smaller or larger if required. A truly extraordinary decorative object. A moon with a…
OpenVessel 2.0 is a redesigned benchmark model for testing your 3D printer’s capabilities. The original was scrapped to make this version unique and functional without resembling Benchy. It’s simple, effective, and even floats upright in…
Files for the compressed air engine used in the following project: FDM printed parts: Crank Case (Front, Rear) Crank Shaft Bottle Lid Engine Mount Piston Head Cap Resin printed parts: Cylinder Head Conrod Piston Seal Mold Other Required…
You don't have a compressor but want to remove dust, wood shavings or other light dirt from your workplace? No problem! With this attachment for your cordless screwdriver, it's done in no time at all! Is it hot and you need to cool down?…
This is amazing model was made by rndmframes_printing and the licensing allows sharing with attribution so I wanted to make sure the prusaprinters.org visitors didn't miss out on it by re-uploading! Original link here:…
The original model was impressive. The author vandragon_de has made a version without holes for bathtube use, but it has some missing solid geometry at the propellers, so that it won't be properly sliced(with CURA). so I fixed the issue.…
BMW Schlüsselanhänger mit E30, E36, E46, E90, E34, E91
Category Part Quantity Fixings M5 Nut 6 Fixings M5 Washers 10 Fixings M3 x 10 CHS 10 Fixings M3 x 20 CHS 2 Fixings M3 Washer (optional) 8 Fixings M3 Nut 10 Fixings M3 x 8 CHS 1 Fixings M5 x 30 BHS 6 Fixings M5 x 8 BHS 10 Fixings M5 T Slot…
A humorous addition to your footwear or your base cap - just for fun. Please check beforehand whether the print matches. With genuine Crocs, the wings will only fit if you loosen the strap fastenings and use longer screws.
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Escher's Birds and Fish. I created this in 2016 because I just had to have a bas relief of this work on my wall. My final mural is about 180cm (71 inches) wide, and was created by taking silicone molds of each of the four pieces printed…
Am besten aus PLA drucken. Zusätzlich benötigtes Material: 1 Sechskantschraube M4x10 1 Sechskantmutter (am Besten Selbstsichernd) M4 Bei den GCodes sind Farbwechsel eingefügt, um die Skala besser ablesen zu können: “Bogen”: 0,8mm…
Designed to fit inside a 20 mm hole drilled into a wooden door, with a matching recessed magnet in the door frame. Once installed, the sensor is completely hidden while retaining the reliability, battery life, and Zigbee support of the…
Owl Vessel Print with at least 4 perimeters if it is going to hold water. I would also anneal it in a pre-heated oven at 120 or so for about an hour. Added owlvase2 (2/10/10) there was a tiny hole in the bottom of removed model.
Fits Gift cards and more! Prints with NO SUPPORTS! High capacity secret stash or gift box. Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Want to sell this? → Grab a commercial license on my Club! Only $20/month cancel…
JERRARI3D.com The Essential Series is a collection of drawer faceplates for the GEN2 Decor Series. Simply print the drawer bodies HERE, and slide your personalized faceplate in place. Lock in place by mounting a printable handle with an…
can be printed together the model needs to be glued together or separately in other colours can be printed without support the Messerschmitt is very realistic Print in place kit card , Assembly required need to use a support
Y accept requests for another artist, song or playlist that's not on the list, It'll be the same base for them. Artists: Camila Cabello Katy Perry Taylor Swift Bad Bunny The Weeknd Lana Del Rey Morat BTS Jesse & Joy One Direction Peso…
Funny sign-"I do precision guesswork based on unreliable data provided by those of questionable knowledge" Complete with recesses for 10mm x 1mm magnets to make the sign easily mountable on any flat ferrous surface. 2 versions (stl & 3mf)…
Burgerpresse mit 200Gramm-Markierung. Das Oberteil und der Griff bekommt je ein Gewindeteil und wird mit einem Gewindestift verschraubt und geklebt. Ich habe das spezifische Gewicht von Hackfleisch gegoogelt und den Durchmesser und die…
This is a non-commercial file. Contact me if you're interested in selling these items. 3MF file included for Bambu Studio
UPDATE 2022.12.19.: Check out Tessellation Cookie Cutters Vol. 2 :-) Last Christmas I found an article about a Norwegian chemist and a passionate cook, Martin Lersch creating brilliant Escher-patterns and turning some of them into 3D…
Hostile monster for tabletop dnd adventures. Check out more from my collection! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This is an exact model of the popular Tennessee T Logo. This should only be used for personal use. I am not responsible for any uses that result in copyright infringement. The dimensions are 54mm x 48.7mm x 5mm. If you want to change the…
Today I was watching a video on the physics of the movie Interstellar, and in this video they mentioned tesseracts a lot. I thought that I would like to try and design one of them. This is however impossible as we exist in a 3 dimensional…
Remix of my other stand that had the logo extruding from the front. This one was made with Hatchbox wood PLA. I really love this stuff. I took the PS Vita Stand by LordLeXaT and cleaned up the front and added a different PS Vita logo,…
This modern designed bowl is like a cut pressed diamond. Minimalist, modern and timeless. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧…
A set of nine 25mm bases with a recessed cavity underneath that comfortably fits a small washer or a penny for added weight (pennies are cheaper). I like to fill mine up with milliput after gluing down the pennies and then sanding them…
Burgerpresse XXL mit 200 / 250 / 300 Gramm-Markierung. Ich habe das spezifische Gewicht von Hackfleisch gegoogelt und den Durchmesser und die Dicke für genau 200 / 250 / 300 Gramm ermittelt. Der Durchmesser des Patty beträgt 140mm. Aus…
Late-WW2 Era German Fighter Jet Messerschmitt Me-262
Dresser unit to hold doll house accessories. Print one dresser housing and four drawers. No supports needed. I used a .4mm nozzle on each part, 10% infill. Tolerance was already factored in so should not need to be scaled unless you want…
Modeled in Blender. This is my first go at making a plane with panel lines, and I'm very happy with how the model came out. I noticed a lack of good BF-109E models, so I decided to make my own. I hope you enjoy it. It has no particular…
Butterfly Messer zum zusammenbauen. für die dünnen Balken der Backen empfehlen sich Stützteller für eine bessere Anhaftung und somit bessere Bolzenloch Qualität die Bolzen lassen sich durch aufbringen von etwas kraft relativ leicht…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Easy, quick printed way to help your Bowden couplers stay tight and strong. Print without supports, as oriented, using your slicer's finest “super quality” setting. Three (3) varied thicknesses of clips are provided: 1.00mm, 1.25mm, and…
I'm printing it now, so I don't have a photo yet. Stand by… I modeled this for the " Tessellating Tiles" design contest. I was searching for tessellating patterns online for inspiration and found this fantastic paper magician on Instagram…
This is a reupload, correctly attributed! I added this to the contest to get more visibility than the person who stole it. update: they were kicked! :-) We don't want stolen designs! Thanks, Susan Cook suekatcook for the design The…
I've made 4 versions of the camera body cap depending on what you'd like. one that keeps the locking pin in place and one that doesn't, and then each of those two options with or without the Pentax logo on it. I've printed the logo +…
I present the spring loaded Coffee/Espresso tamper gadget: easily compact your coffee grind with your own assembled tamper apparatus to make your espresso with style! Available for 49 - 58 mm portafilters. The handle, spring holder and…
Simples Messer für Knetmasse - Simple Play-Doh Knife Easy to print (Use a brim) I printed it in ASA with a wide brim.
This is an older design of mine that I decided to bring to Printables. When I made it, attractive looking chess boards did not really exist in my opinion. As such, I've attempted to create a chess board with an interesting design…
Give me a Like 💗 Follow Me 😁🤗 40mm Bosch-Siemens = 5mm Hole 40mm Universal Slot Short = 5mm Slot 14mm Deep Universal Slot long = 5mm Slot 28mm Deep Features: The Vertical position is better to clean it. Very neat and organized. Compatible…
Model 1 wireframe Two pieces should be printed and joined using 8mm long pieces of filament. It’s necessary supports in the inclined edges and inner cube Resolution: 0,2 Perimeters: 3 Infill: 15% Model 2 stylized Model designed to be…
This model is a large capacity desiccant vessel for the Qidi Box. It's best filled with a funnel or chute with one of the side plugs installed and before installing it in the printer. It keeps the box much dryer than the original packets.…
