77 modeli
Thanks for the great designs by @rezips of the Everdell Duo components. I added a lid for the river tiles for those who want one, and a modified version of the sun and moon standees. I printed with 0.25mm layer height, since I had a 0.6mm…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena jednego wariantu
This is a set of containers for the Everdell board game, specifically the complete collection from Kickstarter. The tray has room for all the tokens, and also includes space for each container! I decided to make my own, so basically I…
Just a few stands for the special events cards. I found that sitting flat on the tree they were harder to read. These keep the 66x44mm cards upright, but are small enough not to block the text. Any filament will do, and you will need a…
This is a simple resizing of the Everdell baskets and lids by bubbarowley and jbelay (on thingiverse). I found that the lids were a little too loose when I printed them with PLA (absolutely could be my printer settings, I'm too new to…
UPDATE 11 July 2026: I have replaced the "ED_MiscA" and "ED_Meeples+SunMoon Holder" with new files to hold the meeples but also to give people resource trays to use DURING the game. These will hold your tokens during the game as well as…
Easy to print, no supports or any required. Now added 3 files for small printers.
A small token and worker tray for the Everdell board game. It sits nicely against the main board and has a spot for all the workers at the back. I use the right side for point tokens. Due to the varying curves of the board, I made two…
This is a little organizer for the boardgame Everdell. It fits inside the existing inlay and is meant to decrease the setup time as well as organize the components during the game. Everdell_Player can stay in the box and will store all…
Original model posted on Thingiverse by Ill_Drakon (https://www.thingiverse.com/thing:4318289). The original model was posted as a plant pot but I scaled it down and it works perfectly as a resource bowl for Everdell! Printed using a 0.6m…
A simple card and resource holder I made for playing Everdell and Wingspan. Could be used for a variety of board games.
This is an organizer for the boardgame Everdell and all 3 of its expansions (including CE and KS stuff). It was quite the challenge to squeeze everything into the main box but I am pretty happy with the result! The only things that I…
When playing Everdell, I find it hard to pay attention to the Special Event cards, especially when sitting a good distance away from the Evertree. This leads most players to forget about their existence, or forces them to have to pick…
Bowls for the board game Everdell
This is an insert I made for My Lil Everdell. Everything is stored ready to play, you just need to open the lids are you are ready to go! The baskets are a resizing of jbelays baskets and bubbarowley's lids . The other pieces I designed…
Introducing the Everdell Leaf For Special Event Cards. If you have encountered the problem of not seeing Special Event cards during your games, this is for you. During my games, my wife and I have noticed that we often forget about these…
With this container, you can store the door tokens for your next Everdell round and place them on the table with style. It has a capacity for at least all 20 tokens from the base game, but there should be room for more. Print…
Made a little replacement token for the original cardboard tokens. The included stl file is made in prusa slicer. It consists of a few different models remixed to this. Because of this, it is very easy to print as a multi colored print,…
A simple set of organizer trays to enhance the default Farshore box insert. Print one of every file here, two of the card trays. Place empty punchboards underneath the plastic insert to ensure a tight fit. Design philosophy was to 1) make…
Please: NO comercial use! If someone wants to buy one see the link below! Bitte: Keine kommerzielle Nutzung erlaubt, kein Verkauf von gedruckten Würfelbäumen. Dieser Würfelbaum kann mit den "Blättern" für Everdell genutzt werden oder aber…
I wanted to be able to put my Everdell cards in a stuck position for both my city as the meadow and station. So far I could not find a 3D-model for it that is why I created an easy design that anyone can use. This file contains the…
My slicer didn't like the gaps in the sides of the original model, so I created a version with solid sides that still has the woven appearance on the outer surface of the walls. Printed with a 0.6m nozzle set to 0.3mm layers.
Introducing the Everdell Resource Boxes PRINTABLE FILES. If you value order in the game box and additionally like your game to look extraordinary on the table, this is for you. After many games played, my wife and I came to the conclusion…
Used to hold the cardboard tree and main deck for the board game Everdell. Our cardboard tree broke and I wanted something to attach the main deck to the tree for when the tree moved. Enjoy! Please let me know if you have any suggestions…
Wanted to print out the resource containers shared by @Jamehz (https://www.printables.com/model/298782-everdell-complete-collection-resource-containers) but needed an organizer after printing them so everything to fit in the box. I do not…
I have taken the foam version of the insert from Folded Space and recreated it to be printed on the Elegoo Neptune 3. *It fits all of the expansions except for two exceptions. New Leaf and Mistwood were not originally included in the…
When transporting the box, the many small parts fell out of the otherwise very nice container designed by @Fabmaszter. That's why I designed this lid. I took the dimensions and designed the lid so that it is flush with the inlay. It sits…
Keeps track of which season a player is in. Can be especially useful when playing against Nightweave in Mistwood expansion (replaces the cardboard discs).
Everdell Material Tray - Might want to enlarge this a bit, I have it set to my bed size but I feel like it could use a bit more space for the wood. I am still working this one out it seems to error right after it starts on the wood…
Made a little replacement token for the original golden cardboard tokens. The included stl file was created in prusa slicer. It consists of a few different models remixed to this. Because of this, it is very easy to print as a multi…
This insert is perfect for you, if you love the game Everdell but not quite enough to invest the money for the complete collection. I put the emphasis on easy set up and tear down as well as a chunky look. It uses three boxes and quite a…
UPDATE: 1/10/2025. This version is now deprecated. Please find the updated version here . Here are 12 tiny nesting bowls that fit neatly into one another. I designed these for organizing game pieces, but you can use them for all sorts of…
These are points tokens for Everdell. Print using a multi-color printer; project file included for reference. For the colors, I use Printed Solid Jesse Yellow, Hatchbox Dark Yellow, and Hatchbox Orange, and Inland Light Brown. The…
UPDATE 2025-01-31 I have update "events_box.stl" and "river_tiles_box.stl" to add a bit of additional space for the tiles as some folks had issues with them fitting too tightly. At the same time, I have added "points_box_v1.1.stl" and…
Stand without the mushroom so it matches the others https://www.printables.com/model/317019-everdell-special-event-card-
An updated version of the insert from https://www.thingiverse.com/thing:3531140 , but with one of the compartments made wider in order to accommodate the twigs from the 2nd edition printing of Everdell . They are larger, and didn't quite…
figurky kapybary do stolní hry Divukraj neoficiální rozšíření stolní hry divukraj
Everdell Boat Resized Recources Container for Typawesome47 organizer. Not sure if it fits in the standard plastic insert
printed and tested the original but the slits were too thin and short for sleeved cards
This is a remix of the awesome My Lil Everdell Playable Insert by tjdesign . I decided instead of using the bit bin that I would create a slide box to hold the dice and meeples and use the baskets to hold not only the other resources but…
I sliced the lid to enable print at every 3d printer. Inner part of the lid was already shrinked a little bit to provide thigh fit. Use glue to secure parts if needed. I used default printer settings. Thanks for the all designers of…
ATTENTION! This is not full insert. Only my added modifications. Original insert is from Typawesome47 and tokentrays Jamehz. Add 5mm in height (only!) for boat shaped tray. No lift, can be stored sideways, no space for sleeved cards.…
Everdell Collector's Edition Organizer. Easy and fast print, designed for fast setup and teardown, used for gameplay, and fits within existing insert pockets. Has lids to keep small pieces in place. Printed with 0.4mm nozzle, 15% infill,…
figurky do rozšíření hry Divukraj (skunkové)
This insert prioritizes a quick setup for the game Everdell Duo. My goals were: No lids, each separate container is closed by other elements No magnets Separate coop pieces (which was partly successful, one pesky piece is just too big to…
I had already printed the excellent baskets from tjdesign ( https://www.printables.com/model/252166-everdell-resource-baskets-and-lids ) that you can put out on the board, but I wanted something on top of them to hold the meeples and some…
Modified the front and back by removing .8mm on the inside but then adding another .4mm to them on the outside This lets Ultra Pro sleeves work and it still will fit in the box(very snug) Print Settings Printer Brand: Prusa Printer: I3…
I haven't found solid insert what fits my needs and vertical storage so I created one. Layout you see from photos how to organize. Each file is printed once except is written in name of the files (festival cards 2x & player trays 4x). I…
With this card box, you can transport your cards securily but also place all cards right at the bottom of the game board where the discarded cards are usually stored. This way, you have both discarded cards but also the drawing cards in…
I used 4 colors, Brown for wood, Gold for resource symbols, Green for the vines, and White Marble for the stones. I also used adaptive layer height to get more detail on the vines. .4mm nozzle and supertack coolplate for the bed.
Everdell Duo Organiser/ Insert (optional lids; includes space for sleeved cards). Designed with less plastic in mind. No box lid lift. Printed with 0.6mm nozzle and 0.3mm layer height. No supports needed. Other print settings will be fine…
3mf recommended for the print. Each standee consists of three parts. Two plates and one foot. For assembly, glue the two plates together and then insert them into the foot. It should be a very tight fit, so watch out not breaking the…
These inserts fit inside the New Leaf Expansion for Everdell and keep all the game tokens neatly organized. Makes use of one of the widely available “small baskets” from the normal Everdell organizer kit so you can keep the occupancy…
These are to upgrade your cardboard resource tokens to resemble the original components of My 'lil Everdell. I printed them at 50% infill for weight only. I guesstimated the actual scale of these based on online pictures of the…
They are slightly larger than the original ones (13mm diameter vs 16mm diameter). You can either print them one-sided or print double the amount and glue them together. The provided 3mf file has two tokens which are mirrored, so the…
Increased the height of the resource bin to double the height (46mm) so you no longer need to print 2 of them. In my play experience one of us would run out of a resource, so it just made sense to have a single pool to pull from. The only…
A remix of the VP tray for Fabmaszter 's excellent Everdell Organizer . I found the VP tray to be way too hard to get out of the box, so I added a small "handle". Tinker with It You can Tinker with this . Support My Work Should you want…
The insert can be all printed on smaller beds and without any supports, makes setup easier and the teardown as well. You only need to print everything once, except the cards separators (small and big) which you can print as many as you…
Box with lid for standard size critters from base game and bellfaire expansion. Designed to print with 0.6mm nozzle, 0.2mm layer. Lid is designed to be thin, so you need to ensure that first layer is calibrated. Box can be depressed in…
These items help me enjoy playing Everdell Duo. Without them I think that the game would sit on the shelf more. They each perform a purpose and add value individually and as a whole. The Action Tile and User Bits trays are intended to be…
I wanted an insert to hold the base game of the 3rd edition that I owned. I don't use sleeves, so I didn't account for them. The card tray is a bit of a tight fit, but I have big fingers and can still get it out. This fits tight in the…
to preserve the decorative ribbon details, .10mm layer height is recommended
Everdell Meeples Bienen Figur für Everdell No support
The figurine has been scaled to have the approximate length as the other figurines of the game and the same depth (10mm). I've printed them with orange Prusament PLA on my Core One+ at 0.1mm and the standard settings which worked without…
We have enjoyed the new game immensely but the plastic bags were just too much for the cards. We use Hex cups for the game pieces and other components but the cards needed something. So I built this to store nearly ALL the cards in the…
These are to upgrade your cardboard player pieces to resemble the original My 'lil Everdell pieces. I printed them at 50% infill for weight only. You could make them taller and wider if you'd like, I guesstimated with pictures for what…
A small holder / organizer that fits all the Components for both cooperative and competetive play of "Everdell Duo". This was designed to fit in the box of "Sushi Go", but you can use any parametric box that is 12.5x12.5x4.1 cm on the…
This insert stores Everdell and Bellfaire together in the original Everdell box while keeping the cards, resources, player pieces, and expansion components separated and easy to find. The design uses 13 removable, labeled trays. During…
Box with lid for standard size critters from base game and bellfaire expansion. Designed to print with 0.6mm nozzle, 0.2mm layer. Lid is designed to be thin, so you need to ensure that first layer is calibrated. Box can be depressed in…
I wanted an insert to hold the base game of the 3rd edition that I owned. I don't use sleeves, so I didn't account for them. The card tray is a bit of a tight fit, but I have big fingers and can still get it out. This fits tight in the…
A small holder / organizer that fits all the Components for both cooperative and competetive play of "Everdell Duo". This was designed to fit in the box of "Sushi Go", but you can use any parametric box that is 12.5x12.5x4.1 cm on the…
A small token and worker tray for the Everdell board game. It sits nicely against the main board and has a spot for all the workers at the back. I use the right side for point tokens. Due to the varying curves of the board, I made two…
When transporting the box, the many small parts fell out of the otherwise very nice container designed by @Fabmaszter. That's why I designed this lid. I took the dimensions and designed the lid so that it is flush with the inlay. It sits…
Please: NO comercial use! If someone wants to buy one see the link below! Bitte: Keine kommerzielle Nutzung erlaubt, kein Verkauf von gedruckten Würfelbäumen. Dieser Würfelbaum kann mit den "Blättern" für Everdell genutzt werden oder aber…
🎥 Video assembly instruction here > https://youtu.be/kCZlnJYLdco 🌳 Everdell Ever Tree – 3D Printable Replacement for the Original Cardboard Tree Bring a touch of magic to your Everdell table with this fully 3D printable replacement for…
Curious how everything fits perfectly back into the box? Watch the full reboxing here → https://youtube.com/shorts/2HzMn4KYPrk 📢 Stay updated! Follow me on social media @ammedia3d for the latest news and new product releases ! 🚀 🎺…
![Everdell DUO organizer by @ammedia3d [unofficial inserts - sku: ARCS001]](https://media.printables.com/media/prints/332946c0-3bde-4c0f-81f2-fd7ced6723b6/images/12514784_f2658bfb-9493-4775-8b3c-e53604529202_e3aa06a1-5b53-4853-b99b-7d6a25f4c858/1.jpg)