30 modeli
I didn't find the back part of the Nazgul Evoque properly 3D modeled on the internet for additional GPS module, so I designed an almost exact replica of the part where the XT60 and the video antenna are and extended it for the HGLRC M100…
Wydruk około 0,80 €–0,97 € nettoWstępna wycena jednego wariantu
Created by Rene Skøtt, this simple but beautiful mount was created to stand abuse from the freestyle life. The design is well thought, giving extra support to those parts that tend to break apart. iFlight tends to have kind of a standard…
Replacement arm protector for iFlight's Nazgul Evoque F5 (V2) Print in TPU No supports required
A mount for the camera of the DJI 04 Air Unit Pro. I recommend to use TPU filament. I haven't tried to print the model in PLA, but feel free to try it out and see if it works. Let me know if it works! I also made a Holder for the antennas…
Since I was unhappy with the original GPS mount produced from Iflight because it broke my UART port of my GPS module, I designed this model. The main advantage in comparison to the original version is that the UART-Port is supported by…
2xFrame and one of each TPU parts is needed. The mount uses the stock bolts (M3x6 top and bottom, M3x10 for the front bar).
mount for 18mm gps modules
A CRSF + FlyFishRC M10 mini GPS holder for the iFlight Nazgul Evoque frame based on my base GPS holder and DJIBryan 's excellent holders for other GPS units .
A mount for the antennas of the DJI 04 Air Unit Pro. I recommend using TPU filament. I haven't tried to print the model in PLA, but feel free to try it out and see if it works. Let me know if it works! I also made a Holder for the camera…
Mount for BLITZ M10 GPS V2 for iFlight Nazgul Evoque F5X iFlight FPV M8Q-5883-GPS Module V2.0 Mount
Create your keychain for your car keys
Made small shark fin for iFlight Nazgul evoque v2. It replaces gopro mount, and also serves as a battery stop. I printed it in TPU 95A, but any fillament would do.
Nazgul Evoque Single VTX Antenna Mount Remix of iFlight Support's stock antenna mount. Changed dual-antenna mount to single VTX antenna mount Compatible with DJI O3 Air Unit Zip-tie hole to mount it securely Still supports ELRS antenna +…
Custom Stealth GPS Mount for iFlight Nazgul F5 V3 (TBS M10Q Ready) Take your iFlight Nazgul F5 V3 to the next level with this custom-engineered GPS mount. Specifically designed for the TBS M10Q GPS (25 x 25 x 7.7mm), this mount combines…
Printing: TPU 10% infill Layers: 0.2 or whatever you want. Paint supports onto the antenna sleeves Usage: There's two parts. The small part is on the bottom, and larger part on top. You can either thread the antenna cables through the…
Butchered GP Mount for most iFlight 5inch 25deg Category: 3D Printing
Smaller side panel/camera mount replacement for the iFlight Nazgul Evoque F5. The stock side panels crack very easily, but this is very durable if printed in TPU. This also improves airflow to the electronics. The third photo is the stock…
Top Mount for GPS IFLIGHT M10 MINI V2 on a NAZGUL EVOQUE F5 V2 with a protection for 6S LiPo (1550 Tattu R-Line here)
Allows 03 air unit antenna to fit in legacy evoqu. Printed in tpu and welded into original holder with soldering iron.
Everything but the body shell is printed in tpu, body shell I printed in petg you can use whatever you want. some tolerances are pretty tight on some of the parts so you might have to fight to get some of them to fit. I'll get the body…
A remix of the Hook/Mount (strohbi) made, needed to remix it to fit my evoque. My infill settings were 100% since it's such a small print.
This module places the GPS under the front camera mount. This fits the original GPS as well as any similar sized GPS modules. NOTE: GPS modules all have different pin outs! You will likely need to change the pin order if you use a…
25 degree mount for go pro bones on a nazgul evoque. The camera will fit very snugly but it will eventually go. There is clearance around the lens to fit a ND filter and have it be protected by the tpu.
Holds the drone to a wall from its front arms. You need 3mm diameter screws to screw it into whatever.
Front mount to fix a DJI Air Unit (not the pro one) to a iFlight Nazgul Evoque V2 frame
Just a small camera cover for a iFligt nazgul. O3 camera is in tight space, so normal caps do not stay in place. Especial if you put ND filter on. Then the camera housing gets an additional weird shape. That's why I made a cover that…
A mount for the camera of the DJI 04 Air Unit Pro. I recommend to use TPU filament. I haven't tried to print the model in PLA, but feel free to try it out and see if it works. Let me know if it works! I also made a Holder for the antennas…
A mount for the antennas of the DJI 04 Air Unit Pro. I recommend using TPU filament. I haven't tried to print the model in PLA, but feel free to try it out and see if it works. Let me know if it works! I also made a Holder for the camera…
Custom Stealth GPS Mount for iFlight Nazgul F5 V3 (TBS M10Q Ready) Take your iFlight Nazgul F5 V3 to the next level with this custom-engineered GPS mount. Specifically designed for the TBS M10Q GPS (25 x 25 x 7.7mm), this mount combines…
