Wyniki wyszukiwania: excavator

Sortowanie

207 modeli

P
PrintablesSHR3D.eu

Small tractor - flexi excavator (printed in one piece without supports)

Small tractor with freely rotating wheels and flexi excavator printed in just one piece. It is printed in the "on the side" position so no need to add supports. For a functional print, you need to have the first layer and flow properly…

Pobrania
8659
Polubienia
1547
Ocena
4,84
P
PrintablesPavel Novák

Náhradní šroubek na bagr Bavytoy / Spare screw for excavator Bavytoy

Jedná se o náhradní šroubek ke stavebnici bagru Bavytoy. Je to kratší šroubek, který se umisťuje na radlici. / This is a spare screw for the Bavytoy excavator kit. It is a shorter screw that is placed on the blade.

Pobrania
18
Polubienia
0
Ocena
0
P
PrintablesProfessorBoots

DIY RC Excavator

This is a fully functional RC excavator that takes advantage of the wonderous capabilties of 3D printers. It uses micro robotic development parts such as an ESP32 development board that can be programmed via the Arduino IDE, this model…

Pobrania
14 087
Polubienia
3112
Ocena
4,87
P
PrintablesWhopperPrinting

Trenchy - Print-In-Place Excavator

NEW print-in-place tracked excavator available here ! OR join my Printables club and get it FREE ! Introducing the print-in-place excavator! This is a challenging print if your settings are not refined. Test your overhangs, clearances,…

Pobrania
12 096
Polubienia
2591
Ocena
4,85
P
Printablesagepbiz

Surprise Egg #4 - Tiny Excavator

Print-in-place and Articulated Surprise Egg #4 - Tiny Excavator 'Making of' video: Stresstest your 3D Printer by printing this tiny collectable stocking stuffer. *edit 04.14.22 added high-poly egg and a high-poly egg with magnet lock…

Pobrania
10 817
Polubienia
2063
Ocena
4,9
P
PrintablesTJC_3dprinting

Toy excavator

Toy excavator with moving parts. I used 2mm aluminum tig rod as the pivots. Tooth picks or filament may also work depending on the scale. It will need supports on parts of the track base and at the end of the main arm, all included in the…

Pobrania
2721
Polubienia
527
Ocena
4,81
P
PrintablesTJC_3dprinting

Mini Excavator key chain

Small excavator key chain made for the operators at work. After printing, the two parts will connect together with some even pressure and some rotating, try keep everything as straight as possible. looks good printed with the tracks black…

Pobrania
2152
Polubienia
231
Ocena
5
P
PrintablesProfessorBoots

3D Printed RC Excavator

Hello, this is an RC Excavator. Its intended to provide a fun entry level way to get hands on experience with some simple electronic components commonly found in robotics but if that's not your style you can also control it with standard…

Pobrania
1573
Polubienia
747
Ocena
0
P
PrintablesAnkerMake

EXCAVATOR ROBOT

Hey everyone! Exciting news – we've just launched the AnkerMake Model Platform. Here, you can access models designed by AnkerMake users themselves, as well as our latest official designs. What's more, we're currently running a model…

Pobrania
1147
Polubienia
112
Ocena
4,5

3D Printed RC Excavator (UPDATED)

I love what ProfessorBoots ( https://www.printables.com/@ProfJohnny_823077 ) has done for the 3D printing community. Please support ProfessorBoots for all of his work to make these models come to life. It does take hundreds of hours to…

Pobrania
983
Polubienia
568
Ocena
0
P
PrintablesPaolo

CAT 395 EXCAVATOR

Approximately 600mm long model of the CAT 395 excavator. The model has working tracks, a rotating floor, and a fully movable arm and bucket. The model is printed entirely in PLA with a resolution of 0.20 for the larger parts and 0.10 for…

Pobrania
956
Polubienia
194
Ocena
4,75
P
PrintablesBlack Jack

Yellow Excavator version 2 with Movements

To view updated version of this model please click here. There are three ways to print this. As single piece :- Please download STL file but there wont be any movements. Multiple Pieces :- Download 3mf file with Full_dismantled.3mf. BEST…

Pobrania
932
Polubienia
115
Ocena
5
P
Printablesdaver18qc

Huina Excavator Buckets (Reg, Sand, Trench)

This is Erdinger's bucket remixed for the Huina Excavator (1550 / 550 / 580) Weights less than the metal bucket which is a nice bonus. Is plenty strong even for the servo-screw modified rigs. Sand Bucket now available (larger, no teeth)…

Pobrania
796
Polubienia
36
Ocena
5
P
PrintablesRadek Věchet

Lego Duplo excavator digger bucket, arm piece, plate and cabin

Lego Duplo excavator digger bucket and arm piece with joints on each side. Not 100% accurate but fits. You can easily modify my models on onshape.com (they offer free tier with only public models), it's not that different software from…

Pobrania
752
Polubienia
127
Ocena
3
P
PrintablesProfessorBoots

RC Excavator Large Scoop

Can be swapped directly out with the original claw attachment pieces. Created to scoop more beans!

Pobrania
651
Polubienia
322
Ocena
0
P
PrintablesKagarov

Flexi excavator (printed in one piece without supports)

I liked @SHR3Deu's original model but wanted to reshape the hood and bottom. It still prints without supports. And now the excavator has an exhaust pipe :)

Pobrania
651
Polubienia
89
Ocena
5
P
PrintablesRoboDIYer

RC Excavator – Fully Assembled Fusion 360 Model and CAT logos

This is a fully assembled RC excavator in Fusion 360 using the original STEP files from Professor Boots. All components are constrained with functional joints (revolute and slider), allowing motion studies and kinematic analysis. The rear…

Pobrania
616
Polubienia
205
Ocena
5
P
PrintablesCrazy3D

Shovel for the big Bruder Catexcavator / Schaufel für großen Bruder Bagger

Similar shovel for the big Bruder Caterpillar shovel excavator / ähnliche Schaufel für den großen Bruder CAT Schaufelbagger Baggerschaufel If you like it --> press like it :-) Print in use since 7 month / Druck seit 7 Monaten in Gebrauch.…

Pobrania
482
Polubienia
50
Ocena
5

Extra-wide Bruder CAT Excavator Sieve Bucket

My kids wanted a extra-wide sieve bucket for their CAT excavator (Bruder no. 02483), so I remixed the existing one as indicated. Print either oriented as-is, or with the opening facing upwards, in both cases with organic supports. In the…

Pobrania
481
Polubienia
39
Ocena
4,5
P
Printablesk.makesstuff

Skid Steer and excavator profile

Skid steer or Bobcat profile Category: Other

Pobrania
451
Polubienia
42
Ocena
5
P
Printablesrightenan

Custom Mods for ProfessorBoots DIY RC Excavator

I love excavators, and ProfessorBoots did an amazing job in designing an RC model of one. These aesthetic modifications are designed to resemble a more realistic excavator. I chose Kobelco as it is a personal favourite. Do comment if you…

Pobrania
445
Polubienia
72
Ocena
5
P
PrintablesHammy

CAT Excavator

This is the 2nd place winner of Polar 3D's 3d design challenge. Requires a lot of support. This is a non-functional model and just a demonstration of Tinkercad's abilities.

Pobrania
415
Polubienia
28
Ocena
0
P
PrintablesBill O

Toy Excavator

I updated the frame for a little tighter fit. Toy excavator with working tracks. All joints are print in place or snap together. The arm pictured is slightly different from the attached arm file which has better range of motion. The top…

Pobrania
412
Polubienia
114
Ocena
4,4
P
PrintablesBlack Jack

Yellow Excavator with Movements

To view updated version of this model please click here. There are three ways to print this. ***As single piece:- Please download yellow_excavator_combined STL or 3mf ***As five pieces :- Please download yellow_excavator.3mf file. There…

Pobrania
396
Polubienia
46
Ocena
5
P
PrintablesBr2ee_

Caterpillar reat engine cover For RC Excavator

Orignal model : https://www.printables.com/fr/model/833291-diy-rc-excavator Assembly instruction & part list : https://professorboots.com/products/professorboots-workshop-pass

Pobrania
392
Polubienia
55
Ocena
5
P
PrintablesSurfalex2000

Excavator on Lego Duplo

This is a Remix from www.thingiverse.comthing2719434files Excavator EGG Surprise Egg #4 - Tiny Excavator by agepbiz and https://www.thingiverse.com/thing:2862283 Realy Duplo Compatible 3D-Printing Optimized Brick (4x2)by Ragnar1337 My Son…

Pobrania
368
Polubienia
77
Ocena
4,88
P
PrintablesGünnî Hexer

Big Excavator Bagger

Ich habe mich mal ein paar Stunden damit vertan einen Bagger zu bauen. viel spaß damit :) Update: Screw's Fixed Tell me if something wrong so i can fix this.

Pobrania
351
Polubienia
23
Ocena
2
P
PrintablesWeaver3294

Excavator ornament remix

Just added a loop to hang on a tree.

Pobrania
342
Polubienia
36
Ocena
0
P
PrintablesRamonin3d

Excavator Arm

The dovetail connections are a bit unintuitive but you sort of turn them into eachother until they lock. They seem to hold fine in this application if you get your tolerances correct. Clicks together with printed pins, no hardware or glue…

Pobrania
316
Polubienia
306
Ocena
5
P
PrintablesPchelkaa

RC Excavator's main boom with hidden wires

Remix of RC excavator main boom with an internal tunnel added for wires to stay hidden.

Pobrania
275
Polubienia
46
Ocena
5
P
PrintablesZiggy

Excavator Coat Hook

ZZD Changeable Hook With a drywall anchor and screw, mount this coat hook to your wall for a functional decoration! Use this excavator hook alongside other tractor and nature decorations to build a scene that perfectly fits your space. If…

Pobrania
258
Polubienia
62
Ocena
5

Fast Track for DIY RC Excavator

These are functionally equivalent with Professor Boots original tracks but print in only half the time. I like to create 3D models that follow these criteria: Do not require supports – I hate supports Print quickly – optimized for 0.4mm…

Pobrania
250
Polubienia
25
Ocena
0
P
Printablespurechaos

Excavator Nameplate

Fixed the second Excavator not being level

Pobrania
237
Polubienia
13
Ocena
5
P
PrintablesWilliam Osman

Bobcat 337 Excavator - Drive Lever Handle

Please help me make new grips for my excavator

Pobrania
232
Polubienia
11
Ocena
0
P
Printablesdaver18qc

Huina Excavator Blade

This is a blade/plow for my 3D printed Huina Undercarriage Needs a N20 geared motor with M4x55 thread, about 200 rpm for best torque Requires my complete Undercarriage, will not fit the stock one !…

Pobrania
232
Polubienia
25
Ocena
5
P
PrintablesPrintedSolid

Excavator - Cookie Cutter

Made this one for my nephew's b-day party. Print it with no top or bottom layers and about 3 shells. I made the model with mixeepopper. Here's a blog post on how.…

Pobrania
225
Polubienia
44
Ocena
4
P
PrintablesBlack Jack

Yellow Excavator version 3 with Movements

Upgrades From Version 2 The tracks are totally redesigned to be walkable if you print with PETG or TPU(preferred). Three sizes - Small/Medium/Large Tolerances are improved. New Color Scheme EASE OF PRINTING This model contains parts of 4…

Pobrania
224
Polubienia
44
Ocena
4,67
P
Printablesjoo

Duplo compatible excavator bucket

Duplo compatible excavator bucket Two versions with different opening angles (tight = more narrow) no supports needed Print Settings Rafts: Doesn't Matter Supports: No Category: Toy & Game Accessories

Pobrania
221
Polubienia
20
Ocena
0
P
PrintablesNusel

Jackhammer for Duplo excavator

Jackhammer for the Duplo excavator

Pobrania
219
Polubienia
27
Ocena
5
P
PrintablesPchelkaa

RC excavator seat

Driver seat/cabin for the awesome Professor Boots RC Excavator. Can be glued / fixed on double side tape to the original “lower body” part or drilling an extra 2,3mm hole 11,5mm to the back from the cabin mounting hole or reprint modified…

Pobrania
216
Polubienia
27
Ocena
5
P
PrintablesMax

Bruder excavator drill

Drill for Bruder excavators

Pobrania
197
Polubienia
26
Ocena
5
P
PrintablesCJHatz77

Forklift Attachment for Professor Boots RC Excavator

New forklift attachment for Professor Boots RC Excavator. Has adjustable width forks. Pallet comes in two pieces for ease of printing. Just use a little superglue to attach the two halves. Enjoy!

Pobrania
189
Polubienia
33
Ocena
0
P
PrintablesMartin S.

Cookie Cutter - Loader / Excavator

Cookie Cutter - Loader / Excavator Dimensions: 75 x 65 x 13 mm Printed from PLA ==== Vykrajovátko - Nakladač / Bagr Rozměry: 75 x 65 x 13 mm Tisknuto z PLA

Pobrania
182
Polubienia
25
Ocena
5
P
PrintablesIndibles

Heavy excavator cookie cutter / stamp

Heavy excavator cookie cutter / stamp

Pobrania
179
Polubienia
19
Ocena
0
P
PrintablesZbyněk Král

Xmas Excavator Cutter

A small Xmas Excavator cookie cutter. Update 10.12.2022: Added STEP file New GCODE and 3MF files OnShape Link Note: Please don't forget to leave a rating or a comment. Feedback is important for me Thank you very much. Happy printing!…

Pobrania
162
Polubienia
27
Ocena
5

RC Excavator Boom and Dipper with hidden wire channel

I really like ProfessorBoots excavator, but I don't like to see the wires. Pchelkaa gave me the inspiration, so I designed these 2 parts with hidden wire channels.

Pobrania
160
Polubienia
14
Ocena
0
P
PrintablesSurfalex2000

Excavator Iron Beads Maxi

Excavator Iron Beads Maxi , designed for my son. You need to use Maxi/XXL beads

Pobrania
154
Polubienia
31
Ocena
5
P
PrintablesHaftelinho

excavator bucket bowl

It´s a bucket from a excavator as a bowl with a foot so that it can stand.

Pobrania
153
Polubienia
14
Ocena
5
P
PrintablesJosh Rivard

Professor Boots RC Excavator Lower Body with Through Hole for Blade Attachment Screws

Added a through hole to the body to make it easier to screw in the blade.

Pobrania
153
Polubienia
22
Ocena
4
P
PrintablesSD89

CAT Logos for ProfessorBoots Excavator

High quality CAT Logos for the RC Excavator, requires AMS or similar system for multicolour prints and superglue. Replacement arm and rear cover have recesses to allow accurate location of the logos and allows them to sit flush with the…

Pobrania
151
Polubienia
25
Ocena
0
P
PrintablesHS 3DPrint

Excavator bucket

Excavator bucket little support,organic suport are best. wos made for friends kid toy (will try to get the name of toy)

Pobrania
148
Polubienia
6
Ocena
0

Bruder CAT Excavator Boom

Bruder CAT Excavator Boom for Magom Hydraulics.

Pobrania
147
Polubienia
7
Ocena
0
P
PrintablesSD89

Various Buckets for ProfessorBoots Excavator

Additional buckets for ProfBoots Excavator: Wide Bucket Narrow Bucket Wide Thumb

Pobrania
146
Polubienia
24
Ocena
5
P
PrintablesJuanCallon

Volvo Excavator toy

You will need to glue some parts and the moving parts are articulated by screws. I used M3 screws, DIN125 washers and DIN 985 nuts to avoid the toy get disassembled by my son. (List of materials will be added later) Caterpillars must be…

Pobrania
141
Polubienia
22
Ocena
5
P
PrintablesSamuel1698

RC Excavator Cab with 2 Screw Holes

Introduced a side screw hole to further hold down the cab and prevent the effects of the wear and tear on the small latches that hold it together normally. I use a version of the cab without the mesh so I've included both versions

Pobrania
141
Polubienia
10
Ocena
0
P
PrintablesSlendrick

Fork lift for Duplo excavator (newer style)

Adjustable fork for the newer Duplo excavator arms links. I recommend not printing it too heavy, since the excavator will tip over. I did 5 walls (0.4 width x 0.2 height) 20% infill and it was a little too heavy.

Pobrania
139
Polubienia
23
Ocena
4
P
PrintablesKiromanc3r

Keychain Excavator customizable

This unique keychain with an excavator symbol in vibrant yellow and black colors is not only functional, but also a statement for construction and excavation specialists. The customizable space allows you to add a name or desired text,…

Pobrania
137
Polubienia
23
Ocena
5
P
Printablesideat0m

Excavator puzzle for kids

Insertion puzzles allow children to develop their motor skills and orientation in the shapes of objects. Individual parts are inserted into their place in the picture. The parts fit together beautifully and simply. Can also be used as a…

Pobrania
134
Polubienia
35
Ocena
0
P
PrintablesLukass

Rucni bagr (hand excavator) kids

Funguje skvele je to sranda

Pobrania
127
Polubienia
20
Ocena
0
P
PrintablesVollesBrot

Bruder Excavator 2445 - Drill

Replace the shovel from the Bruder excavator with a drill. I have changed the mount of the original so that it fits on the Bruder 2445 excavator. the drill bit is also slightly shorter

Pobrania
126
Polubienia
16
Ocena
5
P
PrintablesSamdsx

ProfessorBoots excavator more realistic bucket

More realistic bucket with fast mount system for the amazing excavator from @ProfessorBoots.

Pobrania
125
Polubienia
13
Ocena
5
P
PrintablesVollesBrot

Bruder Excavator 2445 - Rotating drill

Replace the shovel from the Bruder excavator with a rotating drill. Mount fits the Bruder 2445 excavator or similar excavators. The model consists of 3 components: Mount Pin Drill Assembly instructions: The pin is inserted through the…

Pobrania
125
Polubienia
11
Ocena
0
P
PrintablesIhýk

Bruder CAT Excavator Arm

Jedná se o přední část ramene hračky bagru CAT od firmy Bruder.

Pobrania
122
Polubienia
22
Ocena
5

Bruder Excavator Hydraulic Piston Replacement (Parametrizable)

To my surprise I wasn't able to find a existing generic hydraulic piston model suitable for repairing Bruder excavators. This one was originally created for use with the Bruder CAT Mini Excavator (02456), but the generic OpenSCAD file is…

Pobrania
118
Polubienia
13
Ocena
4
P
PrintablesMichal

Excavator bucket for Infento excavator

This is an excavator bucket for Infento-based excavator. Two versions. I tested the first one only. I added also SCAD files, but they are in no way optimized. Anyway, you are free to modify the design to your needs. Print orientation as…

Pobrania
116
Polubienia
9
Ocena
0
P
PrintablesJaegermeister

Trenching bucket for Bruder excavator

Trenching bucket for Bruder excavator. I haven't printed this myself yet. Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: No Supports: Yes Infill: 100 Category: R/C Vehicles

Pobrania
114
Polubienia
5
Ocena
5
P
PrintablesNingen13

cheap and easy to resource track wheel for rc rover, tank, excavator etc

cheap and easy, mod-able track wheel with easy to resource component please like, comment(if you need some additional information and request) and subcribe to my channel.. it would help me to support my another project in future… you…

Pobrania
111
Polubienia
15
Ocena
0
P
PrintablesElmkom

Excavator

Print wheels with tpu, PLA for other parts. Use 8mm rod for axes.

Pobrania
106
Polubienia
12
Ocena
4,5
P
PrintablesEd Veras

Scoop the Excavator

From the original post: Summary Model of the Scoop the excavator from the cartoon “Leo the Truck”. For assembly you will need: 6 M3*10 screws . 3 M3*16 screw . 1 M3*25 screws . 10 insert nuts M3 (OD 4.5 mm, length 4-6 mm) . You can use…

Pobrania
100
Polubienia
22
Ocena
5
P
PrintablesWD

Sand/gravel pit for RC Excavator and Skid Steer

I wanted some form of enclosure to use with Professor Boots' Excavator and SkidSteer, to hold sand/gravel/rice/… that can be ‘excavated’ or scooped up without it spilling everywhere. This is especially useful indoors. So I designed this…

Pobrania
98
Polubienia
20
Ocena
0
P
Printablesideat0m

Building Kit - Excavator - Little Mechanic edition

Simply Exccavator. The model can be disassembled into individual parts at any time with the help of the attached screws, it is possible to replace the wheels with alternative wheels. The model should practice children's motor skills,…

Pobrania
96
Polubienia
26
Ocena
5
P

UNIMOG S404 EXCAVATOR

UNIMOG S404 EXCAVATOR

Pobrania
95
Polubienia
18
Ocena
0
P
PrintablesSteinamyte

Power Hammer for Playmobil Excavator 3001

Upgrade your Excavator with a power Hammer! I wanted to not simply have one fixed part, it should move! Spring is a bit stiff but does the job. Printed in PETG so the spring gets its springiness ;) but PLA should owrk as well. Print the…

Pobrania
95
Polubienia
16
Ocena
0
P
PrintablesSuper-Q

Duplo Toolo Excavator Bucket XXL (große Baggerschaufel)

As I could not find anything like it, I created a XXL excavator bucket from two models I found here on the site. I printed it without supports, but it would probably come out better with it. My son loves it and it allows me to actually…

Pobrania
90
Polubienia
8
Ocena
0
P
PrintablesLogan

RC Excavator Wide bucket.

have you ever wanted a larger bucket for prof boots excavator? Well here it is. credits to builder13 for the straight edge bucket add on to my original one with teeth.

Pobrania
90
Polubienia
11
Ocena
0
P
PrintablesAdrien MEILLET

excavator track bruder PRINT IN PLACE

excavator track for litle bruder modèle. 0.2 per layer. PRINT IN PLACE

Pobrania
90
Polubienia
12
Ocena
5
P
PrintablesStefanVilladsen

Bruder Liebherr Excavator - 02426 Arm

Spare arm for shovel actuation, clicks in place, and there can be added a zip tie for extra hold.

Pobrania
90
Polubienia
12
Ocena
0
P
PrintablesVex41

ProfessorBoots Mini Excavator Cab

I took the cab from the mini lift, and modified it to fit the mini excavator. you'll need a 2.6x12mm screw to install. it's pretty simple to install but you'll need to take out the cab first

Pobrania
90
Polubienia
10
Ocena
0
P
PrintablesAbdullah

WORKING EXCAVATOR

It is a mini model of a 3D printable working excavator. I have detailed it as much I can and also it requires so much less filament also I have made it like it require very less supports also it can be printed using any slicer. it has…

Pobrania
88
Polubienia
12
Ocena
4,67
P
PrintablesSlash179

Excavator shovel cup (Baggerschaufeltasse)

I don't just like beer and coffee, I also like construction machinery and especially excavators. Why not combine both? With a little fine tuning and a few test prints, the shovel eventually became usable for hot drinks. I used PETG and…

Pobrania
85
Polubienia
10
Ocena
5
P
Printablesn9dmt

Mini Excavator Water Bottle Holder

A water bottle holder designed to hold a Nalgene water bottle and fit around a ~32mm tube. Requires: M3 heat nuts @ 5mm in diameter x 4mm tall (x4) M3x25 screws (x4) 4 M3 washers (x4) Print both parts. The heat nuts go in the main body.…

Pobrania
84
Polubienia
10
Ocena
0
P
PrintablesNeohertz

Toy Excavator - Easy Bolt-Together Design

Overview This is designed as vaguely compatible with 'misco' toys. I didn't quite match the threads so re-using the bolts probably doesn't really work. Other tools and pieces etc should work. I would recommend at least having the wrench…

Pobrania
84
Polubienia
18
Ocena
5
P
PrintablesMonsieur-Pierre

Tracked Excavator Construction Vehicle 3D Model

💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A detailed tracked excavator featuring realistic…

Pobrania
84
Polubienia
7
Ocena
0
P
PrintablesAjven Pear

Delonghi Dedica Coffee excavator

Knock boxes are fine but loud and often make a lot of mess! Don't Knock, excavate! Coffee waste excavator for delonghi dedica and compatible machines intended to be used instead of knock box. Zero coffee spill. Version for single and…

Pobrania
82
Polubienia
24
Ocena
0
P
Printablesjakub

excavator

excavator

Pobrania
79
Polubienia
7
Ocena
0
P
PrintablesLogan

Wrecking ball (RC excavator)

A wrecking ball for prof boots excavator! i will be making more attatchments for his excavator and if you want to check out his work there is a link above somewhere where the remix is! 2.0 has bigger ball and a bit of a shorter chain.

Pobrania
79
Polubienia
15
Ocena
0
P
PrintablesToblerone_7

Excavator

Excavator

Pobrania
78
Polubienia
3
Ocena
0
P
Printablesedatki

RC Excavator Rail Conversion

Give your excavator the ability to work on the railway by adding a pair of rail axles. The rail wheels are spaced to run on OS-Railway track printed at 200% scale. Connecting this to the standard control PCB is an unknown as my build uses…

Pobrania
77
Polubienia
26
Ocena
0
P
PrintablesPchelkaa

RC excavator guardrail to hold the PS3 controller

RC excavator guardrail to hold the PS3 controller

Pobrania
76
Polubienia
18
Ocena
5

Bruder Excavator Hydraulic Cylinder Replacement

This one was originally created for use with the Bruder CAT Mini Excavator (02456), but the generic OpenSCAD file is adjustable and it should be quite easy to adjust it also for other models. Note sibling model…

Pobrania
75
Polubienia
7
Ocena
0
P

Excavator shovel for a popular building block system for the little ones

Introducing our latest construction-themed building block accessory - the Excavator Shovel! This innovative shovel is designed with a unique honeycomb structure, offering enhanced strength and durability during playtime adventures. This…

Pobrania
75
Polubienia
6
Ocena
0
P
PrintablesIsmael Leon

Excavator Key Chain

Es mejor hacerlo en PETG

Pobrania
75
Polubienia
7
Ocena
0
P
PrintablesAndreas

Excavator bucket compatible with Lego Technic, Radladerschaufel

compatible with Lego Technic, rotate to print. kompatibel mit Lego Technik. Zum Drucken drehen. Gedruckt mit Buddy PLA.

Pobrania
73
Polubienia
9
Ocena
0
P
PrintablesLogan
Pobrania
73
Polubienia
28
Ocena
0
P
PrintablesBenjy

Excavator Without Text

This is the excavator with the text removed.

Pobrania
72
Polubienia
3
Ocena
0
P
PrintablesConnor Lenz

Excavator Bucket Tablet Holder

Built this model for my father and father in law who both work in Heavy Equipment. Store your peanuts or pistachio's in the bin while you watch a movie on your tablet.

Pobrania
72
Polubienia
6
Ocena
0
P
PrintableseVoxOne

Kids Sand Molds Tractor & Excavator Set

🇩🇪 Deutsch: Diese Sandformen für Kinder bringen richtig Spaß in den Sandkasten oder an den Strand! Das Set enthält einen Traktor und einen Bagger , mit denen Kinder spielend leicht coole Fahrzeugformen aus Sand erstellen können. Die…

Pobrania
71
Polubienia
18
Ocena
5
P
PrintablesSteinamyte

Replacement bracket for Playmobil excavator 3001 / Halteklammer für Playmobil Bagger 3001

Update: This was my first self designed part and it is still in pretty good shape and works very well after nearly two years in service! With the red bracket broken, that holds the arm of the excavator in an upright position, fun was…

Pobrania
71
Polubienia
2
Ocena
5
P
Printablesevoltage00

Double Size RC Excavator

2X Scale of Professor Boots RC Excavator. All Parts scaled and modified to work with 4 50mm linear actuators. Also added a slip ring for driving the motors. Tracks completely redrawn to fit 250x250 print bed area. Track supports were…

Pobrania
70
Polubienia
14
Ocena
0
P
Printableshollebread

GROUSER: Excavator inspired key rack

Simple key rack inspired by the teeth on excavator buckets. Prints without supports and can be mounted to the wall using command strips.

Pobrania
70
Polubienia
4
Ocena
5