F117 Nighthawk
F117 Nighthawk
- Pobrania
- 886
- Polubienia
- 195
- Ocena
- 5
Liczymy pasujące modele…
Remix if Slimak's Cable Clamp Umbilical mod for CANbus needed the umbilical hole to be the size i needed for a CF113.018.D with a sleeve, works great for me instructions slide bowden tube through hole, then clip larger hole to umbilical…
The sjrc f11 pro drone has a very low rear propeller, therefore it has problems with landing on grass and rocky terrain. Mounting the landing gear solves this problem (If you do not have a landing pad), because it raises the drone…
F117 aircraft model. Can be printed in different sizes. I recommend reducing the height of the layers to 0.1 mm compared to the original.
I saw the F-111 from Captain_Ahab_62 and liked it. I found out that his version would print full size nicely at a 45 degree angle on my FLSUN Q5 given it's smaller bed size, with minimal issues with the supports coming off. I tried…
Low-Poly Version of the F-117 Fighter Jet with a Stand as a Pen Holder This 3D model represents the iconic F-117 stealth fighter jet in a minimalist low-poly style. The accompanying stand is designed to double as a practical pen holder.…
Fictional because I am not an engineer and this is in no way an accurate model and it just looks like the plane. One model has a place for the base, so choose accordingly. The little back wings are separated to able support free print.…
This is a redesign of my original Note 20 Ultra phone holder with a tough armor spigen case to accomodate my new phone the Samsung S22 ultra with the same case. I have made the design with a lower height and overall smaller frame. For my…
Has two colors, back color and front color First print the back color then before layer 16 starts (at 0.2mm layers) you change the filament I use the Filament Change plugin from Cura, it stops the print before layer 16 (or what layer you…
I had an Anker PowerWave wireless charger A2503 lying around that I didn't need. That's why I developed this phone holder for my BMW F11 and Samsung S20 Plus in a Spigen Tough Armor case. I like the inductive charging. So the wireless…
Since I lost two of my backseats isofix covers, I redraw them. Maybe someone else need them as well. I printed them with a 0,2mm nozzle, fuzzy skin at the frontside (strenght 0,04mm / distance 0,1mm), and forced support for the first…
A simple ECU bracket to replace the OEM rubber strap that is notorious for falling off the original mounts. Requires drilling 2 holes in the fender and fastening with 8mm push pins. Additional version without the Honda logo
english home battery case design for sjrc f11s is compatible with other f11 models, i recommend printing the main body vertically and the side flaps putting print holders is the only place needed project for those who want to mount their…
This is a remix of Mr_3D BMW phone holder. The original is designed for a different phone holder. In addition, I wanted it to be modular. The ball joint is standard - 17 mm in diameter. It was designed for an F10, it was also tested in a…
Vixen Dovetail Bar for Canon RF 600mm or 800mm F11 IS STM Lenses This is a standard Vixen-compatible dovetail bar that attaches to Canon RF 600mm or 800mm F11 IS STM lenses. These lenses don't have a rotatable foot, just a mount built-in…
EF12 Projector Mount with ¼" tripod mount. Use a steel 1/4”-20 UNC bolt from a common hardware store. Add pause print on layer 21, push bolt into middle slot, resume print to seal bolt inside print. Use 0.7" M4 screws to secure print to…
I saw this model ages ago and liked it. But the artist only provided fix version of the model, either forward or swept. Being a key feature of the F111 was it's ability to swing its wing I always wanted to update this model with that…
Stylish inspired keychain designed in the shape of a car front. Perfect for car enthusiasts, this keychain keeps your keys organized while adding a touch of automotive style. A great accessory for everyday use or as a small gift for…
Replacement base plate and vacuum attachment for Makita RF1101 with fixed base. Requires 5-M3x12mm & 1-M3x45mm screws.
Solar filter for the Canon RF 800mm F11 IS STM lens. This solar filter fits snugly on the end of the lens. You will need the actual solar film to construct this as the 3D printed parts are only the frame. You can buy this on Amazon or any…
https://ruggedroads.co.uk/WebRoot/Store15/Shops/00cbb604-5d1c-407e-8207-580e14387ec5/5EF1/2732/269D/4A8E/A5EC/0A48/3535/7590/53196MKSE00.jpg Part nr 53196MKSE00 or 53196 MKS E00 OEM mount is way too brittle 2 times broke it, so I decided…
This fits a BMW F11 and maybe also other BMW cars from around 2015. If the old cable brakes, this is a replacement of the ring at the cap and the cable. The original ring has to be removed from the fuel cap. Be careful not to brake…
for those who want to print each half separately Category: Vehicles
Tren de aterrizaje para el SJRC F11 Imprimir dos veces cada archivo con un relleno del 50% La colocacion es sencilla,la parte curvada de la pieza va en en angulo inferior del brazo tal como se observa en la imagen
Vixen Right Angle Dovetail Bar for Canon RF 600mm or 800mm F11 IS STM Lenses. This is a standard Vixen-compatible dovetail bar that attaches to the Canon RF 600mm or 600mm F11 IS STM lenses and holds them at a right angle. These lenses…
I lost a vent cap on my headlights so I've made a copy of it. Someone may find it useful.
This is a replacement part for the BMW 5 Series Touring (F11). It is the sliding clip ("leash" or "dog") located in the D-pillar track that automatically raises and lowers the rear cargo blind (luggage cover) when the trunk is opened. OEM…
Ich wollte mein Kennzeichen nicht anschrauben sondern mit Klett befestigen. Um entsprechend Auflagefläche zu schaffen habe ich diese Platte erstellt, welche angeschraubt (M5x160/200) und darauf Klett befestigt wird. Die Schraubenköpfe…
I printed from TPU 95A and ironed the top surface to make it more smooth. Should work well, will see over a few months how it works out. Fits a ton of models: 16019-008, 13251-33110, 168-14184-00-00 1973 Kawasaki F11 250 1974 Kawasaki F11…
This is a perfect recreation of the prefilter used on any Dustbuster vacuum that uses the VF110 Filter. This was primarily made for the lower end Dustbuster models that did not include this prefilter. Of course you are free to print this…
This is a voronoi F117
Do not print this, if you can buy original spare parts instead: Dewalt 868009-00 (Since they have been discontinued, this could be impossible.) Print material: Select the most heat resistant, electrical insulating material that you can…
Aracer Mini X Crf110 mount for under the seat Use 1/4 bolts and nuts (2) MUST drill 1/4 hole under the seat Print top piece on its side Print with PETG at 100% infill Double sided foam tape between the ecu and bottom plate help keep it…
Der Kurbelwellendichtring beim N47D20D Motor hat keinen axialen Sitz. Der Wellendichtring könnte somit zu tief oder zu weit herausragen installiert werden. Im Extremfall könnte er nach innen in das Kurbelgehäuse gelangen. Mit diesem…
I made this water container fitting for a WMF 1100 as we did not had nothing suitable. Print in PETG (or ABS) 6 Perimeters It is possible to print this without support, but needs some cleaning in the overhang areas. Do not put it in the…
Owned my WAECO Fridge for 10 years, the hinges still cost as much as a small Fridge. Dont spend $60-$100 for a set of hinges every few years. Make from ASA or ABS & they'll last just as long but for $2 or less. Printed on P1S - %25…
Battery Nut keeper for CRF1100 Africa Twin. A small part to keep the battery terminal nut in place during installation. Fast easy print, makes an annoying task easier without the need of other more replaceable solutions like stuffing bent…
This is an adapter that replaces one of the two reflectors (the effective front reflector) on each Fooker brand F11 MTB pedal, and allows you to install toe clips on these pedals. The adapter provides a flat surface on which the toe clip…
3x8 gridfinity bin that holds the Canon RF 800 f11 lens. The bin accounts for the tripod mount on the lens. Text is in the .3mf files and not the STLs. .3mf files split into (2) pieces to fit onto P1S plate. This works with the gridfinity…
LED diffuser for the Edsyn FXF11 fume extractor, aka "the fuminator" in the packaging ;) My FXF11 came with a horrific semi-transparent blue cap for the bottom LED, which makes the built-in illumination worse than ambient light, which is…
There are a lot of large filter adapters using tesla filters out there, but I dont have one of those, I have Jeeps. And just turns out the Wrangler cabin filter is a pretty good size to fit the exhaust port, especially if you have limited…
This is a replacement backing plate (holder) for the wing mirror glass on BMW 5 Series (F10/F11) 2010–2017. Specifically
Dr Coffee F11 Gear - Brew group guide gear
Has two colors, back color and front color First print the back color then before layer 16 starts (at 0.2mm layers) you change the filament I use the Filament Change plugin from Cura, it stops the print before layer 16 (or what layer you…
Lockheed F-117 Nighthawk Wall Art; can be scaled easily and can be hung or stand alone. I also take requests