Wyniki wyszukiwania: fabric

Sortowanie

594 modeli

P
Printablesrorys3D

Sunflower fabric coaster

Another fabric coaster. This time circle shaped and inspired by sunflower seeds arrangement. It is surprisingly very flexible and addictive to play with. Just be careful not to put your thicker fingers deep in the center, it's quite…

Wydruk około 2,34 €–2,86 € nettoWstępna wycena jednego wariantu

Pobrania
40 796
Polubienia
10 500
Ocena
4,94
P
PrintablesKeeeal

NASA Fabric Hexagons

Inspired by https://www.jpl.nasa.gov/news/news.php?feature=6816 https://www.thingiverse.com/thing:2437081

Wydruk około 0,80 €–0,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
8795
Polubienia
1179
Ocena
4,8
P
Printablesk.makesstuff

Flexi heart fabric ( print in place )

This is a flexible fabric heart and is print in place. I used a brim to keep the model on the bed but it might work just fine without it.

Wydruk około 9,10 €–11,13 € nettoWstępna wycena jednego wariantu

Pobrania
830
Polubienia
167
Ocena
5
P
Printableskennyd1gital

Spent Primer Catch Tray for MEC 600Jr Mark V Mounted on Inline Fabrication Quick Change Plate

If your MEC 600Jr Mark V is mounted to an Inline Fabrication Quick Change plate, you've probably noticed that the spent primer catch tray that comes with the MEC does not fit properly because the rear-right mounting screw that comes with…

Wydruk około 2,83 €–3,46 € nettoWstępna wycena jednego wariantu

Pobrania
178
Polubienia
25
Ocena
0
P
PrintablesPetros

Chainmail rectangle fabric

This is my first try on creating a chainmail type fabric. Prints fairly easy, if you have difficulty with first layer, you may want to size it up. I created it in Onshape, you can find it here…

Wydruk około 1,31 €–1,61 € nettoWstępna wycena jednego wariantu

Pobrania
141
Polubienia
12
Ocena
0
P
PrintablesDe Jennes

Halloween Chainmail - Multi Material 3D Printable Fabric

A Halloween edition remix from @Flowalistik 's printable fabric. These were designed to be printed on the Original Prusa MMU 2.0 and therefore consist of 5 colors. The pixel art used in these models is not mine and was take from Hello…

Wydruk około 9,43 €–11,52 € nettoWstępna wycena jednego wariantu

Pobrania
63
Polubienia
33
Ocena
0
P
PrintablesPetros

Chainmail triangle fabric

My second try on creating a chainmail type fabric. Prints easy, just needs patience and good first layer adhesion. Here's the Schematic I created in Onshape…

Wydruk około 2,72 €–3,32 € nettoWstępna wycena jednego wariantu

Pobrania
34
Polubienia
8
Ocena
0
P
PrintablesLoafers Lodge

The FSPD (Fabric Softener Pouring Device)

Wife wanted to be able to fill her new washing machine's container for fabric softener through a very small opening. Without spilling. Not saying she has motoric difficulties, but Happy Wife, Happy Life. Blend file for 2.8 And yes... She…

Wydruk około 1,54 €–1,88 € nettoWstępna wycena jednego wariantu

Pobrania
34
Polubienia
2
Ocena
0
P
PrintablesNeybao

Tile Fabric - Print in place and snapfit

Printing Material : PETG (PLA will work too but snapfit features may wear quicker) Layer height : 0.20mm is fine Bed adhesion : you need decent adhesion capability like with most 3D printable fabrics All other settings can be the default.…

Wydruk około 2,51 €–3,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
30
Polubienia
14
Ocena
0
P
PrintablesRay Fox

Riser for MK Prusa Printers to print on fabric

Widened the bed surface to add stability. Also added lips to secure both the heatbed and steel plates by fitting the riser to precisely fit the bed and plate. Added 20mm holes for round magnets. Still have option of using bar magnets.…

Wydruk około 7,28 €–8,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
11
Polubienia
4
Ocena
0
P
Printablesftobler

Dragon Scale Fabric

Due to the large scale attached to the links, this chainmail is slightly less flexible than optimal. Still veeery satisfying to play with. Printed in PLA. Slowed the printer down a bit. Make sure you take build plate adhesion precautions.…

Pobrania
17 050
Polubienia
3425
Ocena
4,89
P
Printablesrorys3D

Fabric coasters

These coasters are very flexible. They are made using my version of 3D printed “fabric” and it's also the first time I publish the “fabric” itself. If you dare, you can split the pieces in slicer and form a new ornament ;). There are 3…

Pobrania
14 122
Polubienia
3864
Ocena
4,9
P
PrintablesMolodos

Fabric/Chainmail Fidget

Print your cool looking 3D printed fabric/chainmail. A great fidget for testing the limits of your printer! Features Dual color profile provided Fully articulated and print in place Recommended print settings (or just use the provided…

Pobrania
10 401
Polubienia
1382
Ocena
4,05
P
PrintablesSean Liang

Octagon Fabric

I had this design in mind, so I decided to make it. It is an octagon-based 3D printed flexible fabric. I am not sure what is the practical use, it might even be completely useless, but I think it looks cool. It could maybe work as a small…

Pobrania
9437
Polubienia
1503
Ocena
4,63
P
PrintablesRossero

TriFlex - Super Flexible Fabric

TriFlex The extremely flexible 3D printable fabric! Most fabrics have limited drapability so I really wanted to create a fabric that was truly fabric like, and I think I succeeded. This includes the following characteristics: Triangle…

Pobrania
8192
Polubienia
1534
Ocena
4,98

Fabric 20 Graphene - Extreme Flexibility - 7 Models

BEFORE YOU LEAVE A BAD REVIEW: A few recommendations- Don't use textured sheet. PEI or supertack is much better. Start off with a smaller piece and be sure to go extra slow first layer! Using a binder like hairspray can help. If pieces…

Pobrania
6718
Polubienia
1301
Ocena
4,94
P
PrintablesCarter Hurdman

nasa fabric

I recommend printing it a bit bigger so it doesn't fuse together

Pobrania
6454
Polubienia
563
Ocena
4,91
P
PrintablesBlueBamboo

Mesh/Fabric Fidget

Fun fidget toy: Mesh or fabric material, like chain mail. If you enjoyed this, check this out! https://www.printables.com/model/1784764-silent-gear-cube

Pobrania
5454
Polubienia
528
Ocena
4,56
P
PrintablesLuke's 3D

Tetrahedron chainmail fabric

Hello everyone, thanks for stopping by! The aim of this project was to create a dual color chainmail and I really like tetrahedron (three sided pyramid) so I decided to go with it. The chainmail consists of lower hexagon link piece and…

Pobrania
5293
Polubienia
1159
Ocena
5
P
PrintablesAdr1an

NASA Fabric

I was board and decided to challenge myself with this project, this is not my own idea i just copped the design from someone on "Printables". This was a decent challenge but i have made things that are harder to design, it was still…

Pobrania
5009
Polubienia
282
Ocena
4
P
PrintablesAgustin Arroyo

Chainmail 2.0 - Modular 3D Printable Fabric

Want to support my work and even sell 3D prints of some of my designs? Check the following links. Patreon: http://www.patreon.com/flowalistik Donations: http://www.paypal.me/flowalistik --- Chainmail 2.0 - Modular 3D Printable Fabric. The…

Pobrania
3701
Polubienia
706
Ocena
4,8

3d Printed Fabric

[First, let me offer you something fantastic] I've released 22 fantastic customizer programs "Amazing STL Creator". Try them out. Create STLs that will amaze your friends. Right now is the best time to get all my programs. Get the entire…

Pobrania
3617
Polubienia
738
Ocena
4,9
P
PrintablesBoundless 3D

Fixels, print in place expandable fabric

***I made an updated version that should fix the slicing issues. I added the model here, but for the full page and description, check out the fixels 2. no supports required at all, much easier to print*** This is my current version of 3d…

Pobrania
3603
Polubienia
1206
Ocena
3,67
P
PrintablesPosix

Multiuse flexible fabric

This is more like a slicer hack rather than a design but it works as expected. This is a flexible fabric type that has several uses. I use it to filter air intakes on fans. You can modify the air flow by changing the infill on the slicer.…

Pobrania
3487
Polubienia
860
Ocena
4,8
P
Printablesftobler

Chainmail Fabric

It is easy to design a 3d printed chainmail. It is hard to do it the right way so it is flexible, but does not tangle and is still printable. Printed in PLA. Slowed the printer down a bit.

Pobrania
3376
Polubienia
452
Ocena
5
P
Printables3DPmom

Fidget Fabric Fried Egg Set (requires mesh fabric)

I have had this idea for a ‘fried egg’ fidget fabric/drink coaster for a little while. I loved the idea of using mesh fabric in the fried egg to give it flexibility and make it feel more ‘egg-like’. The egg shell with the magnets is a fun…

Pobrania
3018
Polubienia
902
Ocena
4,94
P
Printablesim stupid

Hex NASA Fabric Coaster

Remixed NASA chainmail model and turned it into a hexagon shaped coaster. I shrunk it down vertically about 70% to 5 mm. Should be easy to print. I would not recommend printing at a low resolution. (btw the stringing in the photos is…

Pobrania
2663
Polubienia
205
Ocena
4,95
P
PrintablesAron Shroll

Fabric Flat Tape Measure Winder

This is a super-easy 2-piece fabric tape wind-up device for 60", 90" and 120" flat fabric measuring tapes. I got tired of the mess and losing the rubber band that held mine together. Plus, I wanted something that I could wind up when I…

Pobrania
2610
Polubienia
856
Ocena
4,86
P
PrintablesLoboCNC

Fast Print HexMaille Fabric

Inspired by TurboDork's NASA Fabric , I redesigned it to be thinner, less finicky, and much faster to print. Each tile is about 12mm across the flats, and only 3mm thick. The design has no long, thin vertical sections, making it much…

Pobrania
2531
Polubienia
419
Ocena
4,75

Soft Box - Printable Cloth Fabric Flexi Storage

Is it practical, useful, and expands on the body of human knowledge? Probably not, but it sure is satisfying.. Introducing the Soft Box! My Cloth 3d Printable fabric has a secret super-power, it can be built into 3D objects! Why 3D print…

Pobrania
2139
Polubienia
572
Ocena
5

Snap Fabric System ✦ Interlocking Cloth

Recommended Settings: 3 Walls, 20mm/s slow first layer, NO supports. This is an EXPERIMENTAL FABRIC and having pieces come off while printing is normal! You may have to restart or try a smaller model. Brims are not advised. Feel free to…

Pobrania
1918
Polubienia
494
Ocena
5
P
PrintablesTheHamburglar

Easy Print Ring Chainmail Fabric

Use a plate with decent adhesion and a filament with good bridging. Print-in-place, flexes extremely well

Pobrania
1771
Polubienia
413
Ocena
5
P
PrintablesAntoine Jack

Dragon scales ( print on fabric )

Pause after the 1st layer and place the fabric on top of the layer. Use Tape to fix on your plate borders. Make sure the fabric is flat. Printed in PLA. Slowed the printer down a bit (for the top). No supports Make sure you take build…

Pobrania
1722
Polubienia
596
Ocena
4,86

Dragon Scale Flexible Mesh/Fabric l Full design process included (Fusion 360)

🐉 Dragon Scale Flexible Mesh Created by KNINcustom · Explained step-by-step on my YouTube channel 🎥 👉 https://www.youtube.com/@KNIN_Custom 🔍 Description This is a Dragon Scale–style flexible mesh , entirely modeled from zero in Fusion 360…

Pobrania
1496
Polubienia
481
Ocena
5

Cloth - World's Thinnest 3D Printable Fabric

Designed from the start with thin, small, modular components in mind, this cloth is the pinnacle of FDM hard body mesh fabric design! Measuring at a measly 2.4mm tall at 100% scale, the cloth provides ample flexibility while providing a…

Pobrania
1423
Polubienia
357
Ocena
5
P
Printablestbutters

Chainmail - 3D Printable Fabric - Modified for Prusa Mini

This is a remix of Agustin Flowalistik's Chainmail: https://www.prusaprinters.org/prints/286-chainmail-3d-printable-fabric It uses 9 of his sample sized models in order to fill the bed of the Prusa Mini. Print instructions This print came…

Pobrania
1339
Polubienia
135
Ocena
4,79
P
PrintablesMichal Fanta

Chainmail fabric with hexagonal pattern

There are available three sizes, the first test size is 95x100mm, the second is for the Original Prusa MINI and the third is for the Original Prusa MK2/3. Individual parts can be connected with splited connector.

Pobrania
1336
Polubienia
277
Ocena
5
P
Printablesrorys3D

Fabric tray

Tray for household items (keys, coins, clips, sweats, pens, rings, jewelery etc.). The top tray hangs on 6 legs and is made using my 3D printable fabric which gives it a nice curved shape. You can also use the lower base tray for another…

Pobrania
1297
Polubienia
709
Ocena
5

NASA-Style Hexagonal Flexible Mesh/Fabric (Reinforced) l Full design process included (Fusion 360)

🧩 NASA-Style Hexagonal Flexible Mesh Created by KNINcustom · Explained step-by-step on my YouTube channel 🎥 👉 https://www.youtube.com/@KNIN_Custom 🔍 Description This is a NASA-style hexagonal flexible mesh , designed from scratch in…

Pobrania
1220
Polubienia
138
Ocena
4,89
P
PrintablesLoboCNC

Spiky HexMaille Fabric

This is a spiky version of my Fast Print Hexmaille Fabric , for a little more aggressive look! This was originally inspired by TurboDork's NASA Fabric , which used identical interlocking pieces. This design, however, uses hexagonal tiles…

Pobrania
1217
Polubienia
311
Ocena
4
P
PrintablesBearded Printer

Fabric - print in place

It's fabric. Print it, feel it, throw it at someone's face. Maybe even try to eat noodles with it, idc. Just do stuff with it. For those who have joined my club at the “Obsessor” tier or have subscribed to my commercial membership on…

Pobrania
1189
Polubienia
110
Ocena
4,5
P
PrintablesLoboCNC

Extra Supple HexMaille Fabric

This thin hexagonal chain maille consists of hexagonal tiles held together by little cuffs at the edges. It is very flexible in all directions. The tiles are 13mm across the flats and are only 1.8mm thick. Print using a 0.2mm layer height…

Pobrania
1129
Polubienia
288
Ocena
5
P
PrintablesKasai Rayos

fabric

a piece of fabric

Pobrania
1111
Polubienia
345
Ocena
4,5
P
PrintablesChillhaus3D

Fabric Tape Measure Holder

I made this to hold my fabric (soft) tape measure. I added a thumb inlay for easier spinning after I printed mine. The metal end of the tape slides into a slot on the top piece and secures it in place. Print Settings Printer: Gmax 1.5+…

Pobrania
1052
Polubienia
94
Ocena
4,62

Baseball cap of 3D printed fabric

Baseball cap made of articulated fabric, 3D printed from PLA. Please see this short video: https://www.youtube.com/shorts/7Hk1-2h5WbM The cap is very soft, comfortable and durable. The front is solid, the sides and back are made of 3D…

Pobrania
998
Polubienia
206
Ocena
5
P
PrintablesBillie Ruben

Geometric Floating Fabric Printed Necklace by Billie Ruben

This is the print file for my fabric printed necklace, that you may have seen on the front page Reddit: https://www.reddit.com/r/3Dprinting/comments/8d9fmt/i_3d_printed_a_floating_necklace/ or Imgur: https://imgur.com/gallery/sA6or Or of…

Pobrania
941
Polubienia
721
Ocena
4,92

Triangle flexit Fabric

Another model on the Fabric theme - this time made of triangles . This is the pattern I like the most so far - you can see triangles, hexagons and even circles in it This Fabric model is very nicely flexible, At this size it can serve as…

Pobrania
940
Polubienia
208
Ocena
5
P
Printablescodfish06

Flipped 3d Printed Fabric

A lot of people, including me, saw the original model for this fabric and loved it for everything other than the fact that it had to be printed with the top surface up which made it way more difficult to print. So, I edited the original…

Pobrania
910
Polubienia
76
Ocena
4,4
P
PrintablesBRE3DLOVE

Fabric Tape Spooler | Soft Measuring Tape Holder

Latest files are available on MakerWorld. Get the full Plate Print Profiles: https://makerworld.com/en/models/375151 === The original by @noahrr was one of my favorites, but I found the winding holes too small for my fingers, so I remixed…

Pobrania
908
Polubienia
105
Ocena
4,78
P
Printablessyn3cd0che

Improved NASA Chainmail - Flexible 3D-printed Fabric

This model is a ground-up redesign of the classic NASA Chainmail fabric. This flexible fabric is made of hexagonal tiles with interwoven loops on the back. The result is a sheet of hard plastic that can flex and fold like a thick, stiff…

Pobrania
881
Polubienia
62
Ocena
5
P
PrintablesMattie

Nasa Fabric

Printed face down. Makes a great coaster. Multiple swatches can be joined with a 3D pen or zip ties

Pobrania
871
Polubienia
59
Ocena
4,67
P
PrintablesLorro

Mesh Fabric Air Pot

Don't forget to check out the nice remixes of this model by @Strider Varun 🌿 INTRODUCTION Designed this airpot for easy printing. The little holes let air in and the roots will prune themselves when they reach the edge of the pot. This…

Pobrania
790
Polubienia
210
Ocena
5
P
PrintablesCheeseLess

Nasa fabric

Nasa fabric, molding in your hand :0

Pobrania
788
Polubienia
34
Ocena
5
P
PrintablesTheBoss3D

Fabric Fidget (Square)

Fabric Fidget crafted for tough and to have a great fidget to play with.

Pobrania
780
Polubienia
50
Ocena
5
P
PrintablesBazl Tech

1.5" Exhaust Header Fabrication Kit

Each bend block is equivalent to a 22.5deg pc.. So 4 pcs will give you a perfect 90deg bend. They also have angle location marks/notches every 30 deg to help keep track of your compound bends, and make it easy to re assemble and mark once…

Pobrania
780
Polubienia
74
Ocena
0
P
PrintablesVinomakon

NASA Fabric fitted onto buildplate

NASA fabric that fills a Prusa MK4 buildplate

Pobrania
762
Polubienia
42
Ocena
4,8
P
PrintablesBoundless 3D

Fixels 2, Print-in-place, flexible, expandable fabric without needing support

*This is the updated version of my previous design in-order to make printing and remixing easier. Fixel 2 This is a print in place, expandable, fabric that doesn't require any supports. This design is made up of hexagons with small ball…

Pobrania
733
Polubienia
224
Ocena
4,8
P
PrintablesPrinting Panda

Sewing Machine Seam Guide with Double Magnet Slot - Keeps Fabric Straight & Holds Sewing Pins!

I designed a new version of the seam guide with two magnet slots. This one has a 5mm-wide edge to hold down thicker or fluffy fabric while sewing. I also found that with strong magnets, it works as a pin holder too! Here’s what it does:…

Pobrania
732
Polubienia
207
Ocena
4,9
P
PrintablesT6

ChainFabric (Chain Fabric)

Original chain fabric inspired by Flowalstik's Chainmail on Thingiverse, created in OpenSCAD. The sheets can be connected to form even larger sheets; I've connected sheets up to a size of about 6x7 sheets, around 5x5 feet. ## Advantages…

Pobrania
725
Polubienia
135
Ocena
0
P
PrintablesMatt Harrison

3D Fabric Experimentation

I have begun to experiment with printing patterns over materials like tulle and organza, which will eventually be used for costumes and clothes. Here's a collection of patterns that I've designed, which will continue to be updated as I…

Pobrania
720
Polubienia
227
Ocena
5
P
Printablesbigovereasy

Knitted Flexible Fabric Card 8x11

🧶🧶🧶 To make a color pattern, you will of course need automatic filament change . I did not use more than 2 colors (for the pattern itself) For coloring, I select fill and set the maximum Smart fill angle . I specify the needed loops;…

Pobrania
691
Polubienia
215
Ocena
0
P
PrintablesSean Liang

Interconnectable Truchet Armour Fabric

Here is an improved version of my Truchet Pattern Chainmail Fabric. It uses a chainmail-style structure that connects all the pieces together, allowing it to move and behave like fabric while still having the look and character of armour.…

Pobrania
667
Polubienia
200
Ocena
5
P
PrintablesMarc

Fidget Fabrics

These fabrics are fun to play with and can satisfy fidgety urges. The designs are eye-catching and provide visual stimulation while being handled. Each item is grouped by size, from 3 to 5 hexagonal tiles per side. The sizes for each are:…

Pobrania
659
Polubienia
268
Ocena
5
P
PrintablesChris Gama

Scale Mail for fabric printing

I tried to model this to have at least some thickness but not too thick that it takes a long time to print. The base of each scale has a good enough “foot” size to have good bed adhesion but also so that you can put a 1 or 2 layer stop in…

Pobrania
655
Polubienia
95
Ocena
5
P
PrintablesDotCom Artwork

Fidget Flexi Pizza Set (requires mesh fabric)

Fun flexi fidget in the shape of a pizza slice, if you print 8 pieces you can have a pizza in scale 1:1 At layer 4 pause and enter Polyester Mesh Fabric (Mosquito Netting) Commercial License Do you want to sell prints of this model? You…

Pobrania
644
Polubienia
149
Ocena
5

Texture Rollers Fabrics and chainmail #16

A stamp wheel from the Fabrics and chainmail Collection #16 These digital 3D printable models are meant to create textures in clay, polymer clay or EVA foam, and other materials. We want to make more models like this. If you want to let…

Pobrania
616
Polubienia
163
Ocena
5
P
PrintablesDirect Designs

Cape for MODULYR / Dummy 13 Figures - NASA Fabric

Flexible cape for action figures like my MODULYR figure or DUMMY 13. The 6in version fits 6 inch scale figures like my MODULYR. The 5in version fits DUMMY 13 at 100% printed scale (~5in tall figures). The fabric design is based off of…

Pobrania
609
Polubienia
148
Ocena
4
P
Printablesk.makesstuff

Chainmail 3D Printed Fabric ( snap together too)

This is a Chainmail/3D printed fabric design that can be printed interlocking or snap together. saw some of the other designs that were really cool but I couldn't figure out how to going them so I leveraged another design I had to make a…

Pobrania
600
Polubienia
122
Ocena
5
P
PrintablesMartin

Printed Fabric (symmetric, no bridges, no supports)

I saw a couple other designs of 3D printable "fabric" and came up with this easy to print design. It has no bridges, does not need supports and looks just the same from top or bottom side. There's definitely room for improvement, e.g.…

Pobrania
599
Polubienia
80
Ocena
4,67
P
Printables3DPrintNovesia

Fish Scale (on fabric)

Welcome to the world of Printing on Fabric!!! Its really simple! Just Follow these steps: Print 2-3 Layers Hit Pause Place the Tulle fabric Mount it with tape flat on top the printed parts Resume the Print When you use Simplyfied3D you…

Pobrania
584
Polubienia
134
Ocena
5
P
Printablesvolly

very flat snap fastener - i.e. for wallets or fabric

I contructed this snap fastener / press stud to repair my wallet. After printing, simply sew on with needle and thread. Used it on my wallet for the last 2 month now - and it worked quit flawless. Print instructions I printed with: 0.6mm…

Pobrania
583
Polubienia
271
Ocena
5

Parametric Fabric Generator (29 Designs)

Parametric Fabric Generator The provided OpenSCAD script compiles existing fabric models and generates custom fabric sizes. All models have been optimized to reduce their file size. If you need a non-rectangular size i recommend…

Pobrania
571
Polubienia
178
Ocena
4

Flexible Heart Fabric ♡ 7 Models

♡♡♡ Thought I would make a fun fabric for Valentine's Day! ♡♡♡ 7 models to choose from - easy & flexible mesh. Check out the video!~~ See the whole collection here: https://www.printables.com/@TripleGWorkshop/collections/1210125

Pobrania
546
Polubienia
221
Ocena
0
P
PrintablesKeepenithalal

big nasa fabric

nasa fabric

Pobrania
537
Polubienia
19
Ocena
5
P
PrintablesSean Liang

Truchet Pattern Chainmail Fabric

An updated version of this model is now available!!! The updated version allows multiple panels to be connected together and is more flexible. You can find the updated version here: This is a chainmail fabric structure based on a Truchet…

Pobrania
532
Polubienia
145
Ocena
0

Flexible Diamond Mosaic Fabric ⬖ 7 Models

7 Sizes to choose from! No supports, scales up but probably not down. Tactile/fidget toy. Fun shapes and easy to print. My most flexible model so far! Check out the video!~~ See the whole collection here:…

Pobrania
513
Polubienia
173
Ocena
5
P
PrintablesMW-Mechanical

PIP Hourglass Space Fabric

For FFF, I recommend printing at or below .25mm layer height. For faster printing, 2 vertical shells and 0% infill. Fidget with the fabric for a few minutes after printing to loosen it up and wear it in. This makes a big difference in its…

Pobrania
488
Polubienia
55
Ocena
5

Cat - Flexible Halloween Fabrics

Part of my holiday collection of print-in-place flexible fabrics for Halloween! Do not scale down, only up! Enjoy! If your joints are fused, try scaling up or changing filament. Want MORE??? ~~> HALLOWEEN FABRIC COLLECTION Think I'm…

Pobrania
480
Polubienia
123
Ocena
5
P
PrintablesBuildX

#0129 Flexible Fabric Tape Winder (Spooler) [new sizes added]

*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATED April 20 2023] Other variants are published…

Pobrania
480
Polubienia
152
Ocena
4,92
P
Printablessteair

IKEA Markus armrest mount cap & fabric clamp

I love the IKEA Markus office chair. Unfortunately, because of the not adjustable armrests and my sitting style, I never mount the armrests and that leads to a very annoying situation: the armrests mounting points remain uncovered and the…

Pobrania
477
Polubienia
52
Ocena
5
P
PrintablesTomek

flex-hex fabric - print-in-place and snap-fit double-sided

Just another 3d printed “fabric” this one has a small unique feature. Pieces can be printed connected together ( print-in-place ) but also can be connected together after printing ( snap-fit ) - so you can mix colors, make the fabric…

Pobrania
476
Polubienia
145
Ocena
0

Jack-o-Lantern - Flexible Halloween Fabrics

Part of my holiday collection of print-in-place flexible fabrics for Halloween! Do not scale down, only up! Enjoy! If your joints are fused, try scaling up or changing filament. Want MORE??? ~~> HALLOWEEN FABRIC COLLECTION Think I'm…

Pobrania
466
Polubienia
140
Ocena
5
P
PrintablesImmaginaecrea

Nasa Fabric 14 X 16

This version has been optimised for 3D fdm printing. In the original version of the mesh, you can see many hexagons connected to each other and the docking posts touch in many places. The surfaces of the hexagons also showed deformations…

Pobrania
463
Polubienia
45
Ocena
5
P
Printables3DPmom

3D Print with Fabric: Floppy Fish

Although it’s floppy, this 3D printed fish will be hard to put down because it is so fun to play with:) Fabric needed. I recommend mesh fabric (must be “mesh” with holes for filament printing on top of fabric to adhere to filament already…

Pobrania
444
Polubienia
77
Ocena
5
P
PrintablesBazl Tech

1.750" Exhaust Header Fabrication kit

The blocks incorporate a 79.4mm Center line radius (3.126" CRL) Alignment notches are every 22.5deg as well. Basic parts included: 1" long straight 1" long straight with dead-end 10 deg - 79.4mm CRL 15 deg - 79.4mm CRL 22.5 deg - 79.4mm…

Pobrania
443
Polubienia
78
Ocena
5
P
Printables3DPrintNovesia

Crocodile (on Fabric)

Welcome to the world of Printing on Fabric!!! Its really simple! Just Follow these steps: Print 2-3 Layers Hit Pause Place the Tulle fabric Mount it with tape flat on top the printed parts Resume the Print When you use Simplyfied3D you…

Pobrania
431
Polubienia
132
Ocena
5
P
Printablesrorys3D

Holders for fabric coasters

These holders will help you store the fabric coasters, that you can find here https://www.printables.com/model/230771-fabric-coasters . The holders are ready for 4 pcs of coasters. If you need it for more, just use Z scale in slicer .…

Pobrania
430
Polubienia
80
Ocena
5
P
Printables3DPrintandMelt

Fabric

i hope you enjoy my model and i don't recommend scaling down feel free to scale up but i would not scale down and i would not use support. DOWNLOADING AND SLICING DO TAKE TIME PLEASE BE PATIENT

Pobrania
428
Polubienia
27
Ocena
5
P
PrintablesJeff M

Chain Mail "Fabric" | Print in Place

Flexible Chainmail “Fabric” Sheets | Print-in-Place Design These interlocking chainmail-style sheets are designed for ease of printing, no post-processing required. Each tile prints fully assembled in place, forming a flexible, adaptive…

Pobrania
419
Polubienia
101
Ocena
0

Texture Rollers Fabrics and chainmail #18

A stamp wheel from the Fabrics and chainmail Collection #18 These digital 3D printable models are meant to create textures in clay, polymer clay or EVA foam, and other materials. We want to make more models like this. If you want to let…

Pobrania
417
Polubienia
103
Ocena
0
P
Printablesdelock

Fabric flexible bag

This 3D printed bag can be used to hold some small items. This design referenced https://www.printables.com/model/544241-3d-printed-fabric and exteneded it with a slot/insert system for various applicans. It is reimplemented with…

Pobrania
416
Polubienia
213
Ocena
0
P
Printablespaulbovbel

Holder for sunflower fabric coasters

Neat looking holder for coasters

Pobrania
401
Polubienia
88
Ocena
5
P
PrintablesDrJones

fabric inspired by japanese pattern (bishamon kikko), customizable

I recently used a knurling inspired by a traditional Japanese pattern called bishamon kikko and thought that the pattern resembles interwoven hexagons and could be printed as a ‘fabric’ I haven't seen before. So I ended up doing that……

Pobrania
381
Polubienia
102
Ocena
0
P

PIXEL ART CHAINMAIL - FABRIC MATS CUSTOMIZATION

Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ NEW SIZES AVAILABLE! Hello everyone :) Today we want to introduce you to a larger project: Our customizable PIXEL CHAINMAIL…

Pobrania
378
Polubienia
30
Ocena
5

Cloth - Spiked Edition 3d Printable Fabric Fidget

A small change from my design for Cloth, this thin and lightweight modular fabric incorporates spikes for a punk-rock appeal. Feel free to change filament to create extra cool effects! Each unit of the cloth is designed to give out after…

Pobrania
377
Polubienia
41
Ocena
0
P
Printableshollebread

DART: Printed fabric clip for sowing

Print at 100% infill or with 10+ walls to ensure strength with repeated use. Use PETG if you have it but PLA should be fine.

Pobrania
355
Polubienia
57
Ocena
5
P
PrintablesKingTut

Nasa Fabric Chainmail

Nice design No supports Just level your bed Enjoy :)

Pobrania
354
Polubienia
53
Ocena
0
P
PrintablesLoboCNC

Double-Sided HexMaille Fabric

This is a double-sided version of my Fast Print Hexmaille Fabric . It doesn't print quite as fast, and it's not quite as flexible, but it's smooth and shiny on both sides! This was originally inspired by TurboDork's NASA Fabric , which…

Pobrania
352
Polubienia
90
Ocena
4

Bat - Flexible Halloween Fabrics

Part of my holiday collection of print-in-place flexible fabrics for Halloween! Do not scale down, only up! Enjoy! If your joints are fused, try scaling up or changing filament. Want MORE??? ~~> HALLOWEEN FABRIC COLLECTION Think I'm…

Pobrania
351
Polubienia
112
Ocena
5
P
PrintablesFlexi-Maker

Nasa fabric (Print in Place)

Dieses Model kann man als Untersetzer, Dekoration oder einfach zum Rumzappeln. Es ist unendlich erweiterbar.

Pobrania
351
Polubienia
42
Ocena
5