463 modeli
This is a five gallon bucket opener, used to pry open the lid. Note that the .stl has a high polygon count. If you import it into prusaslicer use the simplify mesh ability to reduce the complexity and make slicing easier. The model is…
I designed this simple nine-point star with a bulgy shape and soft round corners as a decoration piece. The primary use of this design is as a nice decoration piece to hang on ribbons or glue on the wrap of gift packaging. To make it…
I designed five star rim for a Tamiya rc car compatible 1:10 model, 52mm diameter, 26mm width, 4mm hole and 4mm positive offset. There is also the hubcap and the tool to screw it to the rim. Print with a layer of 0.15 otherwise the tool…
This is my very minimalistic design of a five-point star decoration. I created this and other similar designs like table and gift wrap decorations. Printed in various colours and sizes, it is a wonderful eyecatcher sprinkled in the middle…
I designed this simple five-point star frame as an ornament with various uses: The variants with one hole can be used to hang them as decoration, but there are also variants with no holes - if you like to glue or tape them to a surface.…
This is my very minimalistic design of a five-point star frame decoration. I created this and other similar designs like table and gift wrap decorations. Printed in various colours and sizes, it is a wonderful eyecatcher sprinkled in the…
five nights at freddies wall decor. 2 color. included GCODE contains auto change pauses. start with white, switch to black To keep my models free, Please LIKE and SHARE this page.
Five little ghosts (one colour): toppers, keychains, stencils or coasters or wall arts 10 cm or 24 cm
one colour - Wait untill it cool down completely first.
This is a Five Crowns version of the lid for the Uno Box by Markus_p which is based on the Rugged Box by Whity . Used the deeper base Uno Box https://www.printables.com/model/937599-deeper-bottom-case-for-uno-card-box Also used the gasket…
Wall art / coasters: Set of five pumpkins - 20 cm, two colours / four colours
Tested with PLA, PETG, ASA. On photos Prusa Orange print is ASA, black is Prusament PETG. ASA prints look better in my opinion. To assembly you need: M3 nuts (4 pieces) M3 distance (20mm) (m-f) (4 pieces) M3 distance (12mm) (m-f) (4…
This is a digital 3D printable model of the five main animatronic ears from the Five Nights at Freddy’s movie: Freddy, Chica, Bonnie, Foxy, and Springtrap . Color-separated parts and multi-material print files are included. Easy assembly.…
Foxy from Five Nights at Freddys.
Un modelo de Luffy de One Piece tipo chibi
Commercial Licence I’m now on Patreon! If you'd like to support future projects or legally sell physical prints of my models, consider joining my Patreon. https://www.patreon.com/cw/MILITECH A compact and satisfying FN Five-seveN –…
I made this coin for my son and his friends as they're heading off to the theatre to see the new movie. I published two versions, one with a very minor emboss that can be printed with a multi-filament printer and one that has a deeper…
TPU parts for the itty bitty LS v2 ultra
Source: https://www.models-resource.com/pc_computer/fivenightsatfreddysvrhelpwanted/model/39686/#comments
Five Nights At Freddy's 1 office. Yeah… this is a model of the old Five Nights At Freddy's office. Print with PLA or PETG it's just up to you. Model size 125x110x100 . Stick the parts with some kind of glue . The posters and textures you…
[PLEASE POST MAKES! I am finding lots of people printing and even selling my files without so much as a peep! I provide these addon files for free and it makes me happy to see people making them. My original files are provided under…
TPU Parts for the Five33 Lightswitch. We print all of our parts with Sainsmart TPU on Prusa MK3s
FNAF Vanny bunny mask use organic support for good print
Five Nights at Freddy’s figure Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This cookie cutter makes the Christmas baking more efficient. Cuts five heart shape cookie at once with minimal waste. Each cookie is 44 x 45 mm. It is designed that the top line has a width of 0.8 mm. That means it is only to outer wall.…
Print out PLA, PETG or other material. You will need 4 screws to mount on the shelf. The case is designed in a modular way, if you need to quickly get inside the case, unscrew the 2 upper screws and pull the front panel towards you…
This cookie cutter makes the Christmas baking more efficient. Cuts five Christmas tree shaped cookie at once with minimal waste. Each cookie is 58 x 38 mm tall. It is designed that the top line has a width of 0.8 mm. That means it is only…
🇯🇵 東京へようこそ! ⛩ Welcome to Tokyo! Celebrate Ten Years of MiniWorld3D with an update to one of our first models. Check out other models in this same location, like Kaminarimon and Hozomon. ⚠ - - Please read the Print Instructions further…
Compré una insignia para imprimir para las bolsas de fiesta de cumpleaños de mis hijos, no estaba contento con la forma en que se imprimió. hice la mía a una escala que funciona para niños y se imprime bien en fdm. no se basa en nada…
Various TPU accessories for the Five33 TinyTrainer V2
This is our take on a beefy 7" spec racing frame. M5 Hardware! You'll need a 3mm driver 16mm-19mm Motor Mounting Lite or Long configuration cavity between mid and bottom plate can be filled with weight all 3d printed part .stl's available…
This is a snap-together case for the VisionFive 2 single board computer. I have included both a slotted version (which you'll probably want if you just want to use it as-is) and a solid version (primarily for if you'd like to modify the…
Don't forget to like and rate! A deck box for the Five Crowns card game. Uses a sliding lid. Fits cards AND instructions.
TPU Parts for the Five33 Switchback PRO
Huge Fan of Five nights at freddy's and for those who are fans too, I created glitchtrap from FNAF Vr Help Wanted. This took me about 2 days. One of my favorite models I have created. Print instructions Print with supports, 0.2-0.3 layer…
This design was inspired by the mechanism used in EJTH's Rubber Band Gun MKII although this model is an original design and probably wouldn't be considered a remix. The uploaded .3MF file has the eight parts needed to print one complete…
Chtěl jsem, aby děti byly šťastné, protože milují tuto hru a film. Frézy jsou vyrobeny ze tří částí. Obvodová část pro krájení těsta a razítko s rukojetí. Přilepte rukojeť na zadní stranu razítka pomocí vteřinového lepidla. Kvůli detailu…
This is the famous clone trooper Fives! i will make a Arc trooper variant eventually.
Funny Sign - "I never make the same mistake twice, I make it five or six times Just to be Sure", multi colour wall art print, printed in ZIRO PLA Twinkling Black and Sunlu Matte white PLA. For more funny signs see my (growing) collection…
Tpu Parts for the LS HD, Switchback HD, and Switchback Zero
🖐 Mini High Five (Finger Edition) High five… but make it tiny. Ever wanted to carry a permanent little high-five buddy on your fingers? Now you can. Slip on these miniature hands and turn your own hand into a walking celebration machine.…
The Five Heads of Communism is a Marxist-Leninist symbol that emphasizes the importance of Karl Marx, Friedrich Engels, Vladimir Lenin, Joseph Stalin, and Mao Zedong in their work developing Marxism-Leninism. Alternative versions known as…
Flipswitch TPU Parts
Snowpeak SP500 / Diana P-Five shoulder stock inspired from crosman 2250 ratcatcher butt stock. Model cut to fit the Prusa MINI I Printed it using PLA with 20% honeycomb infill I used CA glue to join part exept “Left front” wich is bolted…
A front-load rack for beer cans (440ml) that holds 5 cans. Direct access to any cans in the rack. Can store shorter cans (330ml) as well. The front end is slightly raised to avoid cans sliding out. Connect another FIVE or EIGHT rack on…
This model is one from my extensive Children's Toys Collection . Yesterday, the young son of a friend asked me if I could scan and print his favorite plush toy, 'Foxy the Pirate,' from the movie 'Five Nights At Freddy's.' I wasn't…
Nested and keyed Beverage Can Dispenser for standard USA cans (12 oz. / 355 ml). Holds five (5) cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT…
it's a demo project
Forbidden Five hat models based on the Dragons rising show. Scale as necessary to fit your head. Also working on other masks and accessories from ninjago, let me know if there's any designs you'd like to see!
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
TPU Parts for the Five33 Switchback Classic
Source: https://www.models-resource.com/pc_computer/fivenightsatfreddysvrhelpwanted/model/39810/
TPU parts for FIVE33 ZIGZAG
Couldn't find any holsters online that I liked, so I designed this one. It locks the replica in place by a little indent, holding it securely in place. Printed in PETG, as it needs a little flex for the indent to work best, I'd assume. I…
This is a lego minifigure version of the character bonnie from fnaf
Originally published here: The Skeld scaled one in five hundred by tato_713 - Thingiverse The file list is long , I recommend to read the “Scales” section and download only the files for a selected scale. I get on the train of the moment…
This is a Remix of the 5.56mm Battlebox (shared by EvolvingExtrusions via Thingiverse) which has been resized and relabeled to hold 50 rounds of FN 5.7x28mm most commonly used in the FN Five-Seven and P90. I resized using PrusaSlicer and…
Gridfinity hex shank drill bit holder. I've also uploaded a reverse engineered step/f3d file so you can customize!
Here are the files for the Five Guard that I developed to help keep @Joeltelling - 3D Printing Nerd safe while distributing the highest of fives. Obviously the best defence that we currently have is to wash your hands often for at least…
Template for cutting the pieces of a 5 point star, with a 1/4" seam allowance. Makes a 14" block when fully assembled. It prints bottom side up to allow for the nubs that grip the fabric.
TPU Parts for the FIve33 TT HD Let me know if you need something designed for the TTHD
TPU Parts for the Five33 TinyTrainer
Rounded 5cm star bead with 5mm hole. Designed in Illustrator and TinkerCAD. Category: Accessories Note: This design is re-published from Thingiverse and was originally uploaded on Feb 1, 2019.
16.05.2024: A reinforced model uploaded. The original was too fragile. Print with 15% gyroid infill. Random seam recommended.
This is a project of mine. I recommend using the detail settings because of the flowers.
I print TPU parts with 0.4mm nozzle
Unleash your inner ninja with a stunning shuriken, Perfect for adding a touch of oriental flair to your home decor or as a show-stopping accessory for your cosplay ensemble. The possibilities are endless, so let your imagination run wild!…
We are soon launching a KICKSTARTER ! Price for .STL will be: "Pay what you want". Click the link to get notified. This is a manually operated marble machine where marbles go up the steps and return back down via the path. This one is…
3D Printable GT2 Pulleys. Proposed to Print in ABS Designed to be used with M3 Heat inserts and M3 grub screw.
Funny Sign - "Some people just need a high five ... in the face ... (with a chair)", multi colour print, printed in ZIRO PLA Twinkling Black and Sunlu Matte white PLA. For more funny signs see my (growing) collection of them here -…
Version one is designed for single filament printers. Version two (MMU) is designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game):…
Santa, Elf and Reindeer ornaments! I modeled these characters in Blender 2.81 based on my experience as a sculptor and caricature artist. I am a newbie to Blender, so after three attempts I am happy with how adorable they turned out!…
Source: https://www.models-resource.com/pc_computer/fivenightsatfreddysvrhelpwanted/model/39692/
Print with the holes facing down.
The original design is great, I love it. But the original design of 3 digits, I think the strength is not enough, I remixed a 5 digit lock.From 216 possible combinations to 7776 possible combinations. 70% and 80% still have good…
Ti's is 8 bit freddy from fnaf 2.
This Spring Bonnie. My friend made this model and said I could post it as long as I say that he made it.
modeled based on pics and videos from the web. The goal is to fit all snakes in the frame, and then be able to remove the frame without snakes springing apart or stuck on the frame. in other words, do not cram the snakes in the frame!…
Changed diameter of sticks so Five33 Ripsticks fit. Inner Diameter 17mm
Not a lot to say about it, other than it holds your antenna. Printed mine using tree supports. Category: R/C Vehicles
Rest of the body is not mine and I cannot share it, download it here There is no reason to print spiral in color in section you cannot see, so I made my own one from scratch --- Commercial Use --- By purchasing this design on Cults , you…
This design allows you to wall mount your Lego Star Wars UCS Red Five X-Wing vertically. The peg that replaces the Lego stand has quite tight tolerences as I really don't want this thing jumping off the wall! Depending how dialed in your…
I recommend printing technology SLA, SLS or SLM.
This model is compatible with the lego system.
A case for the VisionFive 2 I designed. If I make any more improvements I'll upload them. It uses 6 M3x30mm cap head screws and 6 M3 hexagonal nuts. The screws perfectly fit in and the surfaces are flush. The holes for the screw heads and…
Five33 Switchback Zero - HDZero Nano 90 camera mount Similar to the Five33 stock camera mount for Switchback Zero. Works with the HDZero nano 90 + upgraded M8 lens (1.8mm FOV D:150° H:125V:75°) To be printed in TPU The mount provides a…
Fnaf 3 purple guy keychain.
This model is compatible with the lego system.
I liked the features of the new Five33 Tiny Trainer V2 (https://flyfive33.com/tiny-trainer-v2-beauty-page/), with the “flip open canopy” and easy access to electronics and USB ports. In stead of spending more hard earned cash, I created…
3D printed parts for the little Flipper
The Faz-Wrench tool can be inserted inside arduino type electronics
Prop guards for the Tiny Trainer that do not require extra modification or removal of props/motors to install. They fit onto the ends of the arms by friction fit and a zip tie (not necessary but suggested if racing). The model is designed…
03/2025 update: New bottom spool rollers, the center autorewind replacement. Hardware used(pcs for one box): 2x 608, 2x 688 bearing, 6x M3x10 DIN912 screws. Five removable (sliding) dryboxes in a row on Ikea Lack Enclosure. author of…
Five finger death punch Band Sign As with most just resize to what you want and color if you have a color printer. I tried to keep the logo’s as original looking as I could, I made these for my wall not to sell & figured someone else…
Need help troubleshooting your XL's problems but need to use all five tools to add some data to your discovery? Try this model. I made it so I could better understand whether or not each tool was going where it should at the beginning of…
Puedes modificarlo a tu gusto, incluso si lo quieres de llavero.
Stores 5 AR15 magazines(5.56cal.). It is made with sockets for eight 20mmx5mm magnets so it will stick to the inside of the metal gun safe. I used a couple of pieces of double sided tape or a dabs of silicone caulk on mine to keep it from…
Nested and keyed Beverage Can Dispenser for standard 330 ml. Euro cans. Holds five (5) cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT required…
