492 modeli
No Amiga A500 was complete without a load of floppy disks scattered over the top ready to play. Therefor I designed a full-scale miniature floppy disk for the A500 Mini along with coloured blank disk labels. The Model is split up into two…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
I recently bought a SDisk2 floppy emulator from myretrostore and it didn't come with a case, so I ended up designing one.
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Flip flop box je navrhnut tak, aby byl co nejrychlejší tisk. Jako “obraceč” kartiček slouží proužek ze čtvrtky, který je nutné do modelu jednoduše vsadit. Což je ukázáno v přiloženém videu a fotografiích. Doporučuji tisknout vzhůru nohama…
Wydruk około 2,30 €–2,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Krytka na víčko pro Zdravou lahev s gumovým uzávěrem.
Wydruk około 0,71 €–0,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Small storage for 3 floppy drives. still un use in some industries, very handy to keep your desk good looking. I glued some magnetic tape at the back to place it on my PC tower.
Wydruk około 2,56 €–3,13 € nettoWstępna wycena jednego wariantu
This is a remix fix of an origional model by cashkotulka . They deserve all of the credit. I'm just making fixes so more people can use it. On my printer I'm able to print it without supports. Might want to add a few walls/parameters so…
Update June 29, 2025: Added v3 models in hopes to resolve an issue with the tail breaking off too easily. Update August 8, 2024: Added Detailed_Eyes.stl for those who wish to print the detailed eyes separately. These eyes will fit in…
This is a version of the fortnite flopper optimized for FDM printing. I have included the raw file, a correctly oriented file, as well as the Bambu Studio files for a multicolor version in two sizes: regular and XL. This was designed for…
This model is designed to be printed in flexible filament to make a flip flop that is US Male size 10 . You can scale the model to make it smaller or larger to fit your foot. I recommend using 5% infill or less. The less amount of infill…
I wanted to create a dragonfly model since my daughter and I found a dead dragonfly this summer. The overall proportions are based on the one we found. I tried to create a pattern for the wings which is similar to the real thing but with…
Recreation of a 3.5 inch floppy disk which I use as a coaster. Change filament at 2.6mm if you'd like the metallic spring cover to be a different color.
wanted a goofy floppy goat as a desk toy, Tinkered with the arms from https://www.thingiverse.com/thing:3495390 to make the legs. I didn't account for how it would look when "standing" so I got an extra goofy swole goat Print Settings…
A faithful reproduction of a 3.5" floppy disk SD and HD versions Write protected Perfect for nostalgia nerds Ideal for material swatches Great for filament remnants or samples Print at 0.2mm layer height 5 top layers for a nice finish 10%…
This is just a fun variation on my own 3.5" floppy disk model commemorating 30(ish) years of DOOM. For the original really great ‘blank’ floppy model, click here .
It's a floppy ghost for all your fidgeting needs! If you don't have an AMS or similar multi-color system, you can still print it in all white and will look beautiful! Printing Instructions: The 3mf file provided was created using Bambu…
Variation (original version) of Blobbo's floppy dude file. (With parts :D)
Floppy dragon with no wings
I wasn't satisfied with the filament samples I saw around, they were either too large, too simple, or boring. This is my version of filament samples shaped like floppy disks, with gradients for transparency. I also designed the labels…
Fully 3d-printed ergonomic Flip Flop shoes ------------------------------------------------- I used the Python Flex TPU 90A filament from FormFutura , a flexible filament, which is perfect for this application due to its softness (90A)…
Finally, a 3.5" to 5.25" Front Bay Adapter that you can print on its face for a perfect finish! No support required! Bottom mounting holes available! Should fit most standard PC cases with traditional 5.25" drive bays! Super strong! Print…
Greaseweazle v4 & F1 Plus Mini Case with space for 3.5" Floppy *added new version of the bottom part that fits a Greaseweazle v4.1 **added new version of the top part with a Greaseweazle logo (add both the logo and top at the same time to…
Floppy eared rabbit modified from the Sandford bunny
print flat, inspired by the earrings a host of transport evolved was wearing The design was modified from a design that I can't find anymore from thingiverse, I increased the thickness and depth, and added the hole location for hanging.…
In celebration of ZombieHedgehog's birthday, I designed this waffle. He at waffles on stream to celebrate and I only thought it fitting to design something to go along with the theme! This floppy design is a little different from my other…
It's a floppy food! Haven't you ever wanted a croissant that flopped in your hands that you couldn't eat!? Of course you have! Who wouldn't want that!? ;) Printing Instructions: Layer height: 0.16mm Wall loops: 3 Supports: Nope! Make sure…
Print in TPU Minimal support required
Meet my next floppy installment! The floppy stocking! Printing Instructions: IMPORTANT Stocking Bottom.stl and Stocking Top.stl are meant for printers with MMU or AMS connected to them. You must import them just like I have instructed…
Get ready for the 4th of July celebrations with this articulating flag of the United States of America! Flex on your friends this Independence Day with this awesome floppy model! Printing Instructions: The 3mf file provided was created…
Replacement Macintosh Floppy Eject Gear. The gear in the internal 800k floppy drive on my Macintosh SE fell to pieces so I made a new one. This was modeled from a photo what was left. I didn't have a resin printer at the time, so I used a…
A floppy disk that can hold up to 1 TB. https://www.youtube.com/watch?v=nez5D-GYKAo&ab_channel=Dehapro
IT'S SO FLOPPY!! Impress all your friends and family this Easter as you show off your floppy eggs for all to see. Let everyone feel the satisfaction as they handle your floppy eggs and experience the floppiness! Printing Instructions: The…
A mini floppy disk for your A500 Mini. I designed this to be printable and look great with a standard FDM printer using a standard 0.4mm nozzle(Prusa, Ender etc). But I've included a lot of detail(for such a simple model) that will really…
It's a floppy donut! This particular model is special because we designed it in one of my Twitch streams! People got to see how it was designed! There are two different donuts provided! One with sprinkles and one without sprinkles!…
Simpler 3.5" Floppy Drive or Gotek Flash Floppy drive case for the Tandy 1000 EX or HX via my "External Floppy Drive Cable Kit" + 3.5" or Gotek or "External Drive Adapter" available on Tindie. Should also suit Amiga 500's and other…
These are 3D printed Flip Flops in UK size 7. Luckily I have small feet (for a guy) and these should JUST fit on a Prusa print bed diagonally. I have been wearing these for all of last summer with no major issues and they they are very…
This is a top and bottom for a bare 5.25" floppy drive such as the TEAC FD-55GFR. It is almost certainly compatible with other TEAC FD-55 drives, and likely with other floppy drives of the same vintage. (Note of course that the 5.25" is…
Although it’s floppy, this 3D printed fish will be hard to put down because it is so fun to play with:) Fabric needed. I recommend mesh fabric (must be “mesh” with holes for filament printing on top of fabric to adhere to filament already…
Protect your valuable floppy disks with this durable 3D printed disk case. This case was designed to be easy 3d printed without the need of support or extra hardware, the minimalist design means a easy print and no waste. The case has…
A floppy disk y made in 1996 with 3D Studio R4 for MS-DOS. This is part of the recreation of the computer I had a that time. Print instructions Category: 3D Printing Summary A floppy disk y made in 1996 with 3D Studio R4 for MS-DOS. This…
Mount for 5 3.5 inch drives I wanted to mount 5 Floppy drives on top of each other to experiment with playing MIDI files trough their stepper motors (See: Floppytron ). While searching for the mounting hole specs I found that these were…
This is the container for my filament samples shaped as mini-floppydisks that you can find here: https://www.printables.com/it/model/862027-floppydisk-filament-sample I 3D printed the Storage Box with 0.12 layer height but 0.20 still…
This includes the button and a face for a floppy drive. The button snaps into the ejection mechanism and is kept straight by the face panel. The face snaps into the bottom portion of the floppy. Top portion tabs of the floppy face are a…
Fun dangling flip flop earrings with a multi-color print utilizing filament changes. Excited to see what color combinations you choose! Size up or down but watch the size of the post hole. We included the gcode for a set. But feel free to…
2026-05-16: I have added the FreeCAD files. Feel free to modify or recreate the case. Files might or might not work on newest FreeCAD. The modelling quality might be bad, too :)
Print that 200% scale minimum supports required
I do not recommend walking on slippery surfaces TPU would work best but you can also print pla supports Yes, tree supports recommended.
In honor of PexPeppers being my hot sauce of choice, I present my floppy jalapeno! Two types of prints are available. There are files that allow you to print the jalapeno and stem separately and assemble them and there are files where it…
A SD/microSD Card holder made to look like a 3.5" floppy disk modeled to match dimensions as in ECMA-125 90x94x3.3mm The shutter (top door) is the handle of a sleeve that slides out to fit one SD card and 6 microSD cards. i wanted to stay…
I made a floppy disk coaster a while back and decided it would be a good design for a filament swatch as well. The swatch is 50mm square, 2mm thick, and takes about 23 minutes to print at .20mm layer height. And where you would normally…
2.8 inches? Lets go for 50mm This USB stick drive cover is designed to look like the 2.8 inches wide floppy drive. The USB is retractable after pulling the clip away. Most commercial USB stick drives use the same or very similar PCB…
With summer fast approaching in Australia it's time to dig the flipflops (we call them thongs…) out of the cupboard and head to the beach. I have printed this pair in PLA+ with 0.15mm layers pausing at layer 14 to swap colour to stylish…
Roughly based on this tandy disk holder. Will hold up to 40 5.25" disks comfortably (4 per slot). The lid can be fully folded out to let the box sit elevated for easy access to all the disks (Picture 3). Print Settings Printer Brand:…
I split the design up into 3 parts for easy printing the magnet I used is a 6mm dia x 1mm thick Neodymium Magnet 0.35kg Pull. I have also included blank disk labels template so you can create your own custom labels. Please share your…
Re-mixed to suit a Standard 3.5" Floppy Drive or Gotek Flash Floppy drive connected to a Tandy 1000 EX or HX via my "External Floppy Drive Cable Kit" + 3.5" or Gotek or "External Drive Adapter" available on Tindie. Cable Kit:…
hope you enjoy this piece of joy and fun! (ps i spent 3 hours on it) please scale it down a bit! unless you have a K1 MAX and (or) Bambu labs X1C p1p p1s A1. also be sure to enable supports touching bed plate only. (and or every where)
The well-known and popular floppy disk with DOOM
🐰 Cute Bunny Duo – BUTTON & FLOP Meet Button and Flop – an inseparable pair of 3D-printable bunnies designed with personality and charm. While they share the same adorable body, their unique ear positions give them distinct characters.…
Just posting the project files for you. the rectangle is for you to test infill densities. the left sides were acting weird so I just took the right sides and mirrored them, worked well. Made some new flip flops for about $6 worth of…
This is a very elegant sd card storage solution in the shape of a floppy disc that will remind you of the good old days.
Simple, minimalist pen holder with 4 pcs 3,5" diskettes (floppy disks) If you print this thing, I will be happy to see your make in "Post a make". Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0,15…
Parts Knurled brass threaded inserts: 8 x M3x5 (for the case) 4 x M2x5 (for the Greaseweazle) Bolts: 8 x M3x10 hex (for the case) 4 x M2x4 hex (for the Greaseweazle) 4 x M3x5 Phillips (to mount drive) To complete the device, you will also…
Bring back the nostalgia with these retro Diskette keychains or minis—perfect for tech lovers, retro geeks, and 90s kids alike! Inspired by the classic 3.5" floppy disk, this charming throwback is a fun way to add some vintage flair to…
Floppy disk boxes, specially for 5 1/4 inch disks, go for 50 bucks on eBay, so yeah, this. Prints fine without supports. Small version that can be printed in small 3D printers like the Ender 3. If you want a larger box to fit more disks,…
This remix of Zack Freedman’s Hextraction Flip-Flop Tile was done to remove the built-in sacrificial supports as most printers should be able to bridge this distance without the need for supports. The cross-bridging of the floating hole…
This is a stylized 3D model of the Flopper from Fortnite, designed with clean low-poly geometry suitable for games, animations, or 3D printing. The model captures the simple, iconic look of the in-game item with exaggerated eyes, a…
Printed on stock Prusa MK3S+ in spiral vase mode in PolyMaker Silk Bronze PLA. 0.2 Layer Height 215 deg C
Is it flexi-rex? NO! IT'S FLOPPY REX!! This is a remix from this model . Printing Instructions: The 3mf file provided was saved in Bambu Studio and has the following configurations set: Layer Height: 0.16mm Wall Loops: 3 For those who…
Build a retro inspired 3.5in floppy disk with PyPortal, CircuitPython and 3D Printing! This small USB drive displays icons and filenames on a color TFT display. Enclosure designed by Noe Ruiz This project was inspired by Dana Sibera, aka…
Basic flipflop just for fun. Printed and looks good Category: Decor
Case for Atari 1050 / XF551 floppy power supply unit. Krabička pro napájecí zdroj disketové jednotky Atari 1050 / XF551. Print instructions english text bellow ==== CZ ============ Napájecí zdroj pro floppy Atari 1050 / XF551 Jde o návrh…
I utilize @BeaRes' Floppydisk Filament Sample: as my method for cataloging my filament sample inventory. I wanted an easy way to store all my different samples in a gridfinity-compatible tray. This tray is based on a 1x4 gridfinity tray.…
Now includes a version for the Bambu CMYK Backlight Board and frame. Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture…
Ideal for storing installation disk sets such as DOS or AmigaOS. The lid is held in both the closed and open position by snap hooks. Simply press the round parts inwards a little to release the lid.
The button I could find on the internet for the FB-354 (not FZ-354) was supposed to be glued in place according to an ebay ad I found for it.. Not good enough.. Not good enough at all.. Totally reworked the model but let's call this a…
I uploaded 4 different models of floppy disk: -with hole → keychain floppy -with 90's→ with the writing “90's” -with 90s' n hole → keychain with the writing -simple floppy→ basic floppy
The long anticipated floppy beard is here!! This fantastic beard is designed to be worn on your face! Also included is a clasping mechanism to make it easier to put on and take off the beard. Clasp_A has built-in supports that will need…
It's a little Low-Poly Caracal, based on PS1 floppa, but with ears and a tail (and a bigger head)! A silly little man to hang out on your desk. The head will need supports of course. And try to keep your temp down, or the underside will…
This is a remix of the Gotek Floppy Case by NEMike . What I changed: The four mounting holes on the bottom are extended to fit M3 screws. There is room for M3 nuts on the side of the frame, so the M3 screws hold firmly. This is required…
A trivial design - but it's pretty annoying if you don't have one of these. Should print just fine in almost any filament. A little dab of hot glue will hold it in place.
This 120x120mm Waffle fidget toy is foldable, floppy, and full of fun! Enjoy!
Yes there are a bunch of floppy disk coasters out there, but they all had quirks that I didn't like, so I designed my own. So here we are adding another coaster (with a quirk that someone else won't like). I've included the autodesk…
A sea otter floating on its back waving a hand in a cute little head cocked way with two versions. One with feet up in the air (my preferred model) and one with flopped down feet (less likely to break when manhandled by children).
I have a retro computer with dual 3.5 floppies. I wanted a nice case. Dimensions taken from a Sony MPF 720 Drive engineering document. The pictures show a print using Prusament PLA Jet Black. Printed on a Prusa i3 MK3S+. Quality 0.20mm…
I own an original floppy disk box by Parrot including their awesome 5.25" diskettes. I really love the extravagant design of the storage container so I tried my best to recreate its look and feel. I hope you like it, too!
23-pin connector as used in the Amiga external floppy drives. Two parts make the pin assembly, two parts make the shell, one extra part is to clamp the cable. 2 x 15mm and 2 x 12mm M3 bolts and 4 hex nuts are required. Pins used are…
Measuring only 30mm across, this little disk is a pastiche of its full scale cousin, the 3.5" Floppy Disk . Prints in only a few minutes - ideal as a material swatch. Best printed at 0.2mm layer height.
A case for the Gotek USB floppy drive emulator. Designed for the BBC Micro but may be compatible with other platforms. Three case variants included: no logo, indented BBC Micro logo, and cutout to hold insert with raised logo (which…
Bat decoration with floppy wings. Print in TPU. Recommend using a glue stick on print bed to prevent excessive adhesion or heat the bed to soften material for removal. Use a heat gun to reshape as needed.
A frame to mount the ZuluSCSI Compact RP2040 (Homebrew kit) in a 3.5" floppy drive (fdd) bay. I'm not sure, what kind of fdd bay it is, I think it's IBM/PC. Please measure to hole distances for the screws to verify before printing: the…
Pnp Fish Skeleton made in Tinkercad software. Minimal supports recommended especially around the tail and the hinges.
3.5" Floppy Drive bracket for Gotek with space for 0.91" OLED & KY-040 Rotary Encoder Saves having to drill/mod the normal Gotek case, plus print in any colour. *Originally from my Thingiverse listing and printed on my Anycubic i3 Mega,…
My version of a simple hanger for slippers, flip-flops and sandals.
Bracket to fit a Gotek emulator drive as well as a 3.5" floppy drive in the same 5.25" (half height) drive bay Due to space constraints priority was given to having a screen (128x64 OLED) so there is no rotary encoder mount/hole. Have…
This is a small Floppy Disk Swatch with a Print-in-place design with the top being moveable The size of this model is (50x52x2mm) and uses 5.5g of Filament taking about 24mins to print with a layer height of 0.2mm. I used some 32x32mm…
Printed at 0.15 layer change filament at 1.70 (white) 2.45 (Blue) 3.20 (Black) Or alternate 1.70 (white) 2.45 (black)
Remix of "Floppy Disk 3.5" - resized to cca 3x3cm, write-protect / high-density holes (those were the days!) removed, new bigger hole with rounded corner (for earwire) added.
