Wyniki wyszukiwania: foo

Clothes peg, food

Hello, I have a clothes peg for you, food. They work beautifully and only require very little material to make. Ideal for attaching laundry while drying. I used PLA/PETG Basic as the material No need to use supports If you are interested…

Football Stand

I couldn't find a Football Stand matching my preferences. So I designed my own ;-) Matches the original football size (HxLxW 7x12x7 inches / 17.78x30.48x17.78 cm). But even works with smaller sizes. The stand can also be used in asymetric…

Replacement Foot for Lasko Box Fan

This model is best printed on its side or with the clip assembly at the top of the print. I advise against printing it flat, as when you insert it into the fan's foot slot it will split (unless you have adamantite layer adhesion lol).…

Nintendo Switch Horizontal Dock Foot

My only options for placement of my Nintendo Switch dock were behind the TV or laying down under it. Behind the TV gave us connectivity problems with the controllers. But laying down the Switch without modifications presented several…

Logitech keyboard replacement foot / leg

The foot / leg on a Logitech keyboard broke, this is a replacement. In one of the photos I have shown the original foot (grey) and the replacement (black) side by side.

Red Dot Agled Offset Mount for RMR / RMRcc / RMSc footprints

canned food organizer

fits regular cambells soup can size and bigger chili can size

Gingerbread Person - Surprised with Missing Foot

Notes: Add a color change at specific height for different colored frosting in your slicer. Joints have 0.2mm tolerances and print well on Prusa Mini+. If your joints are fused, adjust printer settings to compensate - or break those…

Dynamic Range MIDI Foot Pedal

About I was looking to buy a MIDI pedal with a good range of motion and a fairly low price (mainly to control virtual instrument's expression/volume while my hands are on the keyboard, and my right leg is on a sustain pedal). I didn't…

Animal Footprint Stamps

A fun animal footprint stamp set with 4 different wild animal tracks – great for kids, crafts, and nature-inspired projects! 4 types of footprints – fox 🦊, deer 🦌, wild boar 🐗, and hedgehog 🦔 Perfect for clay, playdough, modeling clay, or…

Filament Dry Box using Inomata-K Dry Food Stocker

I submitted an improved version . September 20, 2023 Filament dry box using dry food stocker 6.0 from Inomata-K. イノマタ化学の乾物ストッカー 6.0を使ったフィラメントドライボックスです。 Requires 1x : Dry food stocker 6.0 / 乾物ストッカー 6.0 2x : M5 screw 70mm / M5ねじ 70mm 2x :…

Animal Foot Prints

To scale wildlife foot prints. These animal tracks are perfect for either an educational setting or just as display. You can easily add a color change when slicing to allow the track to stand out more. If used as a display you need very…

Soccer - football shirt keychain

Support your favourite team with a nice keychain! Print it with multimaterial or by layer to obtain a nice final color effect! You can find the .3mf files ready for multimaterial printing, just choose your favourite spools of colors.…

Mr. Kim Leng Thai Food Flying Restaurant

Mr. Kim Leng Thai Food Flying Restaurant from the 5th Element. or torture test benchy. ?? kimleng3 = basic model without computer aided orientation. (pick your own orientation) kimlengorientationvs = auto oriented with meshmixer for best…

Kenwood Chef Food Processor Blade Holder

Inspired by Michael Brill 's Kenwood Chef Blade Holder , I wanted to attempt to build my own version and take the opportunity to experiment/learn more of OpenSCAD. The first blade counting from the left is facing a different way from the…

Logos of the College Football Teams of the ACC-Altantic Coast Conference

This is not all of the ACC Teams - as people request the additional teams I will do my best to respond. I will fill in the missing teams as they are requested - Enjoy! All gcode files are setup for manual color changes

HDX Heavy Duty Shelving Foot and Cap

This is feet and caps for the storage units that Home Depot sells, the HDX Heavy Duty ones. See pictures, this fits the 18 and 24" versions of this same shelving. I used these storage units in a place where I could only use 3 of the…

6 animals footprint paws template stencil keychain

It’s 1 mm high with additional 0,4mm for the text. You can easily change colours between layers for 2-colour effect. Scale it up as you need on axis X and Y (I don’t recommend scaling down).

(Baby) Chicken automatic food feeder

Feeding the chickens

Kapsaczech - Food pouch protector / holder

Protective cover for child's pouch Prevents the pouch from getting squeezed, protects baby from getting dirty and ensures that all snack contents end up in baby's tummy - Easy to grip - especially useful on the go - designed to ensure…

Canned Cat Food Dispenser

This is a small dispenser I designed to dispense cat food. I designed it around the Hills C/D cans, but I imagine it should accommodate most 3.3" wet food cans. The cans must be stacked in opposing directions in order to be able to pull…

Ergonomic Pet Food Scoop - Multiple Sizes

Ergonomic, printable scoop designed to measure and serve dry pet food. The shape is optimized to collect and pour kibble comfortably and cleanly. Updates 2026-05-04: New sizes, 300 cm³ and 320 cm³. 2025-07-21: New size, 280 cm³.…

MTG Food Can Commander Deckbox

A friend wanted to create this hilarious deckbox , but he couldn't find a food can with the required dimensions. So 3D printing saved the day! This deckbox is specifically designed to the dimensions of the label from the reddit post. It…

Keyboard Foot for Microsoft Natural Ergonomic 4000 Keyboard

Replacement Keyboard Foot for Microsoft Natural Ergonomic 4000 Keyboard ( KU - 0462) . I had an old computer which I refurbished to donate. Used my printer to replace the broken feet of the keyboard with a designed new one, because I…

only fools and horses logo

I made this model because I couldn't find anything to do with only fools and horses the print lifted in the bottom right corner slightly as you can see in the picture I will do it again at some point it has 4 colours at 11 ½ hours to…

Cuisinart Food Processor Blade Storage

This is a container to store Cuisinart food processor blades. It accommodates an arbitrary number of 150mm disc blades, two DLC-10 FP-100TX steel blades, and two disc blade mounts. The Solidworks file is built with equations. Open the…

YETI COOLER SLIDER FOOT

Push-in foot for Yeti Tundra 65 Cooler covering the existing rubber feet allowing the cooler to slide on hard surfaces, like the back of a pickup truck. I have a Tundra 65 so I don't know if this will fit on other size Tundra coolers. If…

IKEA VIMLE Couch Leg/Foot (for Robot Vacuum)

I printed this with PETG and made the walls thick but you can adjusted to however you need. The original leg height is 65mm, the one I created is 105mm, but you can use the Fusion360 file to adjust it to your likes. The original screw…

Small Cat Food Can Lid

A scaled-down version of Piney29887's Cat Food Can Cover for the smaller 3oz cans of cat food. Keep that food fresh between meals! Add your cat's name to the lid with the new text tool in PrusaSlicer 2.6!

Mini Tabletop American Football Flick Game

Use tree supports for balls + brim for launcher. A compact tabletop American football game based on precision and flick mechanics. Place the ball on the launcher, press down, and release to shoot towards the goal. The force of the press…

Vertical food can dispenser

Large food cans could be easily stowed one on another because they fit easily (different-sized top and bottom rims). But small food cans does not have a such nice property, they tend to collapse when stowed one on another. Not anymore!…

Peugeot 208-II foot mat clips

The clips of the footmat of my Peugot 208-II (2020+) are to small to hold the fabric. So I designed my own clips that are bigger so the mat wouldn't slide under the gas pedal. It fits my Peugeot 208-II (2020 version). Not sure if it will…

LACK Tennis Ball Foot

Tennis ball leg extension, anti vibration and scratch guard for ikea Lack table. 15% infill, on bed supports, layer hight 0.2, Prusament PETG Urban Grey used. Made by Hodinový Maker

Foot acupressure mats

Here's a version of strshp's acupressure mat designed specifically for your feet. The tops of the spikes are flat with a diameter of approx. 0.8mm to make it easily printable but still pointy enough for the spikey feel! I recommend…

Mouth-blown airbrush lid for a Gerber baby food jar

Update June 13th 2023: Significantly improved functionality. Do you have old Gerber baby food jars lying around? Do you wish you had an airbrush but don't want to spend the money? Turn two problems plus a 3D printer into a solution! This…

Furniture footings height adjustable

All footings come in two parts, one basic footing and one screw to adjust the height. The screw has a M15x20 mm thread so height adjustment can be done around 15 mm. You will also need a 4mm screw to attach the foot to your furniture…

Lid for Canned Dog Food

This lid is for a can with a lid diameter of 75mm (as measured on the outside of the top metal seal ring). The lid consists of two parts: Ring - this has a loose press fit onto the can top Lid - this cover is a snap fit into the ring I…

Buttonhole sewing foot guide

This buttonhole sewing foot attachment makes sewing straight buttonholes a breeze. It grips the fabric and can only slide back and forth. This allows you to make a very tight slot without worrying that you might cross your previous…

Grêmio Foot-Ball Porto Alegrense

Chaveiro do Grêmio para imprimir com as 3 cores na mesma camada Ao abrir o arquivo na primeira mensagem no prusa colocar “Não” e na segunda “Sim” Abrir a aba do prusa em “Config. da Impressora” e “Geral” e adicionar 3 extrusoras com as…

Kitchen Cabinet Door Pull With Foot

Use this pull with your foot to open kitchen cabinets!

V3 - 1590a ish for diy guitar effects with jacks and footswitch holes

V3 - replaced the pegs and holes style connectors with semi-spherical connectors around the lid (see new pictures). Printed with prusa mini and connection is pretty solid. I added a small slot at one end of the lid to pry it case you need…

Sharkoon Skiller MECH SGK3 Foot Replacement

A replacement part for the rear feet of the Sharkoon Skiller Mech SGK3 keyboard. The original feet start to crumble after a few years. This replacement was designed as close to the original dimensions as possible. They nicely snap into…

Intex Swimingpool Foot

Model does not need supports. The model can be printed on a regular bed. For extra resistance against deformation, consider printing the part under the tube that inserts in the hole with solid infill. (see attached project file)

Losmandy G11 Tripod Foot

This tripod foot is meant to be an improvement over the Losmandy Tripod Foot, which does not stay attached to the tripod during transit. This new design fits into the open bottom of the leg extrusion, friction fit, so that it stays with…

Stepladder foot replacement 20x33mm

Replacement feet for small stepladders with a frame of 20.40 mm x 33.40mm and a ground angle of 22°. Print instructions Best printed in non-brittle plastics. PETG is what I used. Printed standing up with a snug support. 0.20mm layer…

Ikea Duktig Play Kitchen Replacement Foot

Don't ask how, but the kids of our friends lost one feet of their Ikea Duktig play kitchen . So here is the replacement part. Printed in 0,2mm PETG structural preset. There are some overhangs and bridge infills, but with my Prusa MK4 they…

Sport Lisboa e Benfica : Football Club : Logo : Spanish la liga

Sport Lisboa e Benfica : Football Club : Logo : Spanish la liga. Curved so please do not attempt to color with change filament at z height.

Tamiya Blackfoot / Monster Beetle Rear Body Mount Cross Member (Part G1)

I needed a replacement for the original cross member, as mine was broken. The part is a bit thicker as the original one, but fits the model nicely.

Quick-Release Stackable Table Footings for the Prusa Ikea Lack Enclosure V2

Overview For a video tour of this tower setup, please visit this reddit post . In this video I explain how this quick-release system works along with some of the other upgrades that I have made for my Prusa i3MK3S+ with MMU3! (: File…

Makerpipe Endcap / Foot for EMT Conduit

Makerpipe ( https://makerpipe.com/ ) is this fun Kickstarter that makes connectors that allow you to use inexpensive EMT (Electrical Conduit) for creating things. It's kinda like having an Erector Set for adults. I hope they plan to…

Original Prusa Enclosure (OPE) - Middle Foot

A simple remix of the original midfoot for the prusa enclosure. All you need 2 magnets : 10mm x 2mm just press them in and you're done.

Jeep Hood Footman

This is the footman for a Jeep TJ hood (small bar in center of hood) to hold down the windshield via a strap. Uses two M4x20 caphead screws, nuts, and washers to mount to existing hood mounting holes. Reuse existing rubber gaskets from…

Replacement Foot Pedal (Tramontina Trash Can)

A replacement foot pedal for the Tramontina 13 gallon step trash can available from Sam's Club. Two versions of this print are available: Standard version (does not fit the MK3S+ print volume) Chamfered version (fits MK3S+, matches OEM…

Glasslock Food Storage Lid Clips

The clips on Glasslock lids break off after a while, as all “ living hinge ” designs eventually will. Rather than throw away the lid, use these replacement clips. I have two clips here. One for square or rectangular containers, and one…

Improved Beyblade Arena Foot

This pair of models is a replacement Beyblade arena foot and mounting plate. Stock height is maintained The design should also allow repair of an arena whose mounting squares have split or broken, as it uses the outer two holes and…

Lenovo SK-8825 Keyboard Foot

Replacement foot (high) for Lenovo SK-8825. May fit other models.

Discord push to talk foot pedal

If you don't want to use voice activation on discord and a ptt key is clumsy during gaming, maybe this foot pedal will help. This pedal holds a arduino pro micro with the ATmega32u4 chip. This chip allows the arduino to work as a usb…

Bambu Poop Chute - Smaller Footprint

This remix is from a request to be able to print the Poop chute on a Prusa MK3 printer.

McDonald's take away drink and food holder

It prevents accidental knocking over your drink and allows you to take your snacks with you.

Box Fan Replacement Foot

The feet on my box fan broke. So I took some photos, imported them into Fusion 360, took a bunch of measurements with a micrometer and boom. Replacement Feet on Demand. After I printed the first one I realized it was a little loose so I…

Road Beacon Foot

Fitting Foot for my Road Beacon (Straßenbake). Multiple Feet are stable and interlock with the little pillars on top and also fit my construction fence. https://www.printables.com/model/546672-strassenbaken-road-beacon…

Wolf footprint Scout patch badge, ready to be sewn on

Take a look at this Scout patch badge featuring wolf print, ready to be stitched on. You'll find two versions, one with a subtle design and the other with a raised design. Check out the one you prefer! You won't need any supports when…

only fools and horses poster

the jolly boys outing poster 0.2 layer height only 2 colours yellow 3.40 black 3.40 - 4.40 15% infill

Slabrador foot holder

It is done with 0.1 mm layer height and fuzzy skin only outside faces. Does not need supports or raft.

Drone foot for STEELE 5 220mm fpv frame. 1/4

Drone foot for STEELE 5 220mm fpv frame. need to print 4

Single Foot for Prusa Enclosure (OPE)

Recommended print settings: Orange Prusament PETG (to match OPE…. or pick your own :) ) 0.4mm nozzle 0.2 mm layer height 15% Grid or Gyroid infill

only fools and horses trio del Rodney grandad

this is printed with 100% infill at a 0.30 layer height and in PLA with 1 colour change at layer 2.00

Footrests for RC car RMT T98 Land Rover Defender

Hello, I have for you Footprints for RC car RMT T98 Land Rover Defender 1:10, 1:12. Footprints have a place for one canister on each side. The canister is also included, which is in the picture. The footprints are slide-on to hold, no…

Japan Football team

Black White Red Black gold

foot / Fuss

Its a foot for a wodden hexcomb.

Football Worldcup Trophy beerglas

The FIFA Worldcup 2022 in Qatar is mere hours away, as I'm uploading the last files of this project. This worldcup is the first of its kind to take place in autumn, when the temperatures in most of the western football watching world…

Kabeltrommel für Ninja Foodi Max Dual Zone Air Fryer

Da wir das Gerät nur bei Gebrauch aufstellen, nervte mich auf Dauer das Kabel. Ich habe eine einfach anzusteckende “Kabeltrommel” entworfen, damit endlich Ordnung bei Nichtgebrauch entsteht.

only fools and horses trio

i made this plaque of delboy rodney and uncle albert layer change was at 3.50 at a 0.3 layer height and in pla with a 20% infill I only ironed top layer only to keep the print time down

Fish are friends, not food!

Since I cannot endorse hurting animals for personal pleasure, I thought a sign with the famous quote from Finding Nemo might be the right model for me to participate in the current contest. The design involves 5 color changes to get the…

Ikea Bekväm kitchen cart foot end

The foot end is designed to fit under an Ikea Bekväm kitchen cart and there are associated spacer of the same elevation to screw between the caster wheels and the foot. I am using this kitchen cart for garden grilling activities. The main…

Food / Fondant / Cookie stamp with ( THANK YOU )

Make your sweet treats even more heartfelt with this "Thank You" Fondant Stamp ! This digital STL file is perfect for creating professional-looking messages on cakes, cupcakes, cookies, and other baked goods. Designed for 3D printing, it…

Foot Replacement for Rolling Luggage

Ever had a log flight and went to the baggage claim carousel only to find your leg on your baggage broke from being tossed around carelessly by someone? I have and it's no fun. I made this to fix that damage. Put your luggage back into…

Gartensessel Fußverbreiterung / Garden Chair Foot Extension

This widening / extension is the solution for heavy garden chairs with thin round feet that can easily sink into the wet grass floor. In addition, these extensions have proven themselves on the terrace, as the rattan armchairs are so much…

IKEA Godmorgon Drawer Divider Foot/Stand

I made this replacement foot/stand for the dividers in IKEA Godmorgon drawers based on the original foot (you can see comparison in the photos). To avoid supports, lay it flat on the trapezoid side in the slicer (like you see in the cover…

Food Identification Sticks (Vegan, Vegetarian, Gluten, Lactose)

These food identification sticks are designed to help guests with allergies or dietary restrictions easily identify dishes at gatherings. Simply insert the sticks into the plates to clearly label the food. This eliminates the need for…

Chair Foot (Brand unknown)

Replacement of Garden Chair broken Foot Covers with wathering hole. default Profile: 0.20mm SPEED @MK3 Layer High: 0.2mm Minimal Shell thickness Top and button: 2mm Fill desity: 90% Used Filament: Dutch Snow White (it is glittering under…

Food / Fondant / Cookie stamp with ( BEST TEACHER EVER )

Celebrate the educators who make a difference with this lovely "Best Teacher Ever" fondant stamp! Designed for 3D printing, this stamp helps you create meaningful decorations for cookies, cakes, cupcakes, and more. It's a thoughtful touch…

Finger Flicker Football!

Official Finger Flicker Football for Cafeteria Tournaments!

Footprint giftbox with lis

based on model -> https://www.printables.com/model/623861-doorstopper-footprint rescaled, cuted and printed in vase mode

Foot-pedal box for NECCHI Q132A sewing machine

Wanted a box to store the foot-pedal of our NECCHI Q132A sewing machine. I found one here https://makerworld.com/en/models/121716-footpedal-box-for-singer-heavy-duty#profileId-130981 but wanted to have one with different size and a door…

foot door stopper

foot shape door stopper

Ford Focus MK4 | front footwell brackets for Aliexpress ambient light

Ford Focus MK4 brackets to stick the Aliexpress ambient footwell LED's on. The brackets will fit into the original mounting positions where normally the factory ambient lights will be installed. Somehow left and right have a slightly…

Kitten food and water bowls and base

My wife found a very small kitten and now WE have a very small kitten lol. We could not find a bowl set that we liked so I made these. From the floor to the top of the bowl is 2.3in, the bowl width is 3.62in in diameter, The bowl depth is…

Replacement Foot for Kolink VOID Cases

This is a very quick little print for a replacement foot for the Kolink VOID case series. It may work on other Kolink cases, however, we haven't tested that - simply because we don't have any others! I whipped this together after we had…

2022 April Fool

2022 April Fool, like it, download it, slice it and, optionally, print it You can find all my models here , thank you who will appreciate with a download or with a like

Medals for the best football/volleyball players

Hello, I have Medals for the best football / volleyball players for you. The medals are great and very nice. Every athlete will appreciate it. You have 2 types from me so that you can choose. One type is a file for football, the other…

Thule Bike Rack Custom foot

Here's my design on a set of feet, so that a Thule BikeRake comes a little above the ground when taken off the car. It fits all steel profiles that are 40mm wide. Drawn in Fusion 360 They are designed with internal cable tie penetration…

1.FC Union Berlin football club sign

EN: Print at 100% infill and 0.2mm layer height. Two perimeters are recommended. Swap Instructions: 0,0 - 2,0 mm … WHITE 2,2 - 3,0 mm … YELLOW 3,2 - 4,0 mm … RED 4,0 - 5,0 mm … BLACK CZ: Tiskněte se 100% výplní a výškou vrstvy 0,2mm.…

Canned food stacking insert

We love beans in our mostly vegetarian home, but the cans we buy from Costco don't stack! Wtf? I made this little minimalist insert to go between layers for better storage. They can be stored on a nail in the pantry when not in use, and…

Magnetic Food Calendar (For expiration dates, meal planning, etc.)

I'm always paranoid about wasting food and I mentally plan out when all my meals are so that nothing goes to waste. This little tool can help keep track of the dates that things go bad or can be used to plan your meal days. I tried to…

Keyboard Foot Hama

Keyboard Foot Hama Tastatur Fuß für Hama Tastatur

Prusa fan shroud 2015. Bigfoot. falco*sign.

Filament : Prusament. PETG Black. PETG 0.20mm. 20% Infill : Gyroid. Nozzle : 240c. Bed : 85c. Support : None. Enable Ironining. All top. ( This print does not need any supports.) This shroud. Has better air flow.

dog food can lid 75mm

dog food can lid 75mm Dog food cans come in different sizes. Lids are available in 76 mm, but they don't fit. Unfortunately, the can was 75 mm! So, design it yourself, print it, try it until it fits. Weighing only 7.5 g, the lid uses…

adjustable Table Foot (Brand unknown)

Originally there Where 2 Adjustable Foot and 2 Fix. I remade 4 Foot that can be flexible Adjusted to Ground Level. Used 4x Hex Bolt M8x30 and 4 Hex Nut M8 Stainless steel. default Profile: 0.20mm SPEED @MK3 Layer High: 0.2mm Minimal Shell…

Spare Foot for Ladder

Replacement for a foot for an aluminum ladder. Inner profile is 40 x 21.5mm .. and a lot of radii:-). Printed in ASA which was in the printer.