Liczymy pasujące modele…
Printed with PETG. The text looks more ugly on the photo than it is. Perhaps another font is better to print. OpenScad file included for happy editing!
Wydruk około 0,57 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These are a few fundamental Sashiko templates that I use for visible mending. Use a water washable marker (eg Crayola water washable marker) or heat erased pen (eg Pilot Frixion) to mark the lines onto your fabric or garment. I have also…
v4 foundation is confirmed compatible with OEM baseplates. This foundation piece resolves a number of issues identified with other foundation pieces I've seen on this site, mainly: tile spacing, proper hex shape, compatibility with OEM…
This is an insert / organizer for Terraforming Mars: Ares Expedition, along with the Discovery, Foundations, and Crisis expansions, in the larger Kickstarter expansion box (note: this does not fit in the retail box). It has no lid lift,…
This is the low poly design of the modular lantern LR2268. It builds the project’s base and contains the frame, lid, pole and foundation. Use these with one of the side panel prints to create a small candlelight or a complete lamp with a…
Update 2026/08/20 : V2 rollers available The V2 rollers are now available with an improved cell geometry. Thank you Kahera for your advice ! If you already printed the original version, you only need to print the new rollers…
My wife is a foundation phase teacher and use these alphabet sets in her class to teach the kids how to read and write. There was a need for Alphabet letters in a specific font by the local teachers in my community for pre-school and…
An initial attempt at a foundation for a beehive. OpenSCAD code is provided if anyone wants to make adjustments to any dimensions.
I am currently testing a new hive concept (for me) called the AŽ (ah-zha) hive which is a Slovenian beehive design invented by Anton Žnideršič and named the Alberti-Žnideršič (AŽ) hive. Žnideršič named his hive after himself and a German…
Hi Kevin, I though this helmet was cool and made a Variation of it that kind of reminded me a little bit like a Madalorian helmet. Its a start ; ) It wasn't till I researched some pictures that I found there is a lot more detail to be…
Numbers in the required font for Foundation Phase or Pre-School teachers. Tips I print the numbers face down, so that the textured plate gives the front facing side of the letters a nice finish. I print these with a 0.6mm nozzle at 0.3mm…
Langstroth-compatible beehive frame designed specifically for printing. Top and bottom boards are two pieces in order to achieve the necessary length on a mid-sized printer. Design uses 4 m3x20 bolts and some snug-fitting joinery. Glue is…
I created this to stored all the components of my Red Sea Foundation Kit after the box it came in broke. Just wanted to share. Print instructions I printed this on my MK3S. Layer Height: .2mm Infill: 15% Nozzle: .4mm Material: PETG, but…
No instruction needed. No support. For educational purposes. Can be printed in different colors. Designed with Autodesk Revit In the attached picture, - Bambu lab PLA basique #10205 (red) - Base plate & stiffeners, steel column -Bambu lab…
The Prime Radiant from AppleTV's Foundation Series. The Prime Radiant: An Archimedean solid, cuboctahedran made of six square faces and eight equilateral triangles. The internal lattice is created by projecting the edges inward toward the…
هذا شعار يوم التأسيس السعودي حيث ينفع كتوزيعات
This is a housing that I designed for holding a raspberry pi 3B+ and raspberry pi foundation 7" touch screen. I use it to run a kiosk mode of home assistant in my house. You will likely need to get a 90deg micro usb connector due to…
Empire symbol from AppleTV+ Foundation series.
Same model as https://www.printables.com/model/979865-gravitrax-junior-base-platefoundation/remixes, with less material
The Invictus Classification: Ancient Imperial Altair-Class Battleship, later referred to as a "planet destroyer-level" ship. Design: Characterized by its massive concentric ring structure, which is integral to its function. The design is…
This is an insert for Terraforming Mars: Ares Expedition. It can hold a base game and two expansions (Discovery, Foundations) and 2 packs of promo cards. This insert will not fit Crisis Expansion. I don't have it yet and I think the box…
Fortnite Foundation Jeep Duck
It was quite the headwreck to work out how to unfold it to make it an easier print but I'm pretty happy with the result. Originally, I had intended to fold it the other way (with the gold inside) but it looks so much cleaner this way…
Simple cheap foundation roller.
Originally published here: Life Foundation space shuttle scaled one in five hundred by tato_713 - Thingiverse This model was requested by Joshua Jacobson . This is the rocket that appeared in the film Venom , where it was launched and…
A game-accurate 3d print of the multiplayer level Foundation from Halo 2. This is my first two piece diorama. Enjoy the unobstructed view of the main floor by removing the optional ceiling structure. All my models are derived from the…
RaspberryPi Foundation official Pi Zero case support parts for Tripod 2 Type!! for RaspberryPi Foundation official Pi Zero case for Original Ultra small Pi Zero Case See this site for more information. Sorry, This site is Japanese only. (…
Foundation Day Logo
What you'll need: M5 x 30mm Screw x2 (Main bolt) M3 x 25mm Screw x2 (To attach the locking mechanism) 10x3 mm N38 Magnets x4 (To make them more secure (OPTIONAL!)) Category: Hand Tools
My wife is a foundation phase teacher and use these alphabet sets in her class to teach the kids how to read and write. There was a need for Alphabet letters in a specific font by the local teachers in my community for pre-school and…
RaspberryPi Foundation official Pi Zero case support parts [Support parts correct positioning of the camera module] PiZeroOfficialCamera_Spacer [Support parts blocking 40pinI/O hole] PiZeroCase_HoleGuard See this site for more…
This phrase comes up a couple times in AppleTV's Foundation, and I thought it would look good as a sign for my office.
I uploaded gcode and a 3mf for Prusa Mk3s, but that's not a requirement. You can use any slicer and printer and set up manual filament changes. Don't forget the pause before the layer that covers up the magnets. This model is designed for…
Demerzel Foundation Ai Hi-Res , (scale it) i didnt test it on printer.
An organizer made for foundations size for each object: 3.5x3.5 cm height: 5 cm space for 6 units
This is a part of the Quadrilla Murble Run you allways have too less. I founded a group for the HAPE Quadrilla marble run: https://www.thingiverse.com/groups/hape-quadrilla-marble-run Have fun to print. Category: Construction Toys
Commercial license - https://www.patreon.com/MeasureOnce Harry Potter Series: Sorcerer’s Stone - https://www.printables.com/model/914416-lithophane-books-harry-potter-book-1 Chamber of Secrets -…
Brio pillar, bridge foundation Great addition to the Brio railway. Magnetic assembly: no broken parts if someone trips over it. Center piece can be replaced for different heights --> see more creations on my profile Magnets measuring…
Filament Change / Dual Color (AMS): Black, White, Red PLA. Layer Height: 0.08 mm. Infill: 15% Supports: None needed.
You will need to purchase the screws (¾ inch) and the mounting screws (two 2 - ½" coated masonry screws), as well as the mesh venting material. I also added super glue to the model to join the parts together. You will need an accurate…
The math foretold this models existence, it was inevitable. This is a Foundation logo sized at around 20cm wide and 3mm deep to accommodate four optional 5x2mm or 6x2mm disc magnets in the back. It can be used as a sign or with a non…
Can be printed on Elegoo Neptune 4 Max and other large format printers. Print vertically with the top bar on the bed and without any supports. I recommend coating the foundation in beeswax to encourage the bees to draw it out.
A 3D-printable shallow honey super foundation (5-5/8") designed to fit standard wooden frames. It can be printed on standard bed sizes and assembled into a full-sized foundation. Use it raw or brush on a thin layer of melted beeswax to…
Print 4 for a full set. Tested for months using 15% infill.
I present to you the foundational formicarium KingFoundationV2: It has the following characteristics: The tube should to be of : 15,70mm +- tolerance your Print3D Modular moisture system, when the water in the tube runs out, it can be…
I used an old PLA, 0.4mm nozzle, 0.12 layer height.
Related to my existing model of the Cybertruck logo here is my version of a logo/badge for “Foundation Series” that mimics the laser etching found on early model Tesla Cybertrucks as you can see in the photo. Will fit on small printers…
set your line width to nozzle diameter , and the layer height to 50% of nozzle diameter , select the correct model for the nozzle diameter, tune your speed, acceleration and cooling to get the best foundation layer
Brio pillar, bridge foundation double height for tracks above tracks! Great addition to the Brio railway. Magnetic assembly: no broken parts if someone trips over it. Center piece can be replaced for different heights --> see more…
These are the Temple Fortress -- Foundations Building Blocks, which go with four other additional groups of blocks and pieces in this set, including the Basic Blocks. See below for the links for the other groups of pieces. The Temple…
Inspired by David Malawey's OpenBox Project , this collection provides standardized cover and container designs that are compatible with various utility box brands and models used throughout the USA and Canada. These versatile base…
Basic dimensions 90 x 70 x 1 mm. I included both vertical and horizontal big logo.
This is a designed wax starter strip for regular frames or top bar types. It has been designed and optimized to help the honeybee to build at the natural slope of 13 degrees and with a strip height of one cell high, this will provide for…
Perfect wall hanger SCP Foundation logo print upside down no supports
Compact organizer for daily usage. Smaller compartment: eyelash curler, liner, pencil Bigger compartment: palette, cushion
My kids play Egg Inc on their tablets and they are super proud for getting to the point where they have the final model of the Science Foundation. So I modeled it in Tinkercad, expressly using .2 layer height with a .4 nozzle (I would not…
Boxes to use with the original insert for Foundations of Metropolis to keep everything in place and make it easier to distribute pieces. This is mainly for storing the game vertically or avoid spiling components when carrying the game.…
People I play with often have a hard time identifying the buildings once they're on the board, especially the Civic buildings of which the civic symbol is tiny, so I made these bands to make it easier to identify them at a glance. I used…
I made this because i wanted to be able to make out a base design irl on my desk
-Fan Art- Stencil of the Galactic Empire Crest from the Apple TV Series Foundation (based on Isaac Asimov's novels) to decorate your wall. Just hang it on a nail on your wall. You can scale it to the size you want if you keep the aspect…
Foundations of College Algebra Sign with a base.
Changed the "holderbase" file using openscad to be able to mount the pi zero on a 2020 using a M3 Screw.
I create mostly utilitarian functional models. Generally addressing the need is the primary concern and looks come secondary, if considered at all. Please leave a comment if you print this and find it useful! I needed to run a garden hose…
The model The model is a futuristic Rubik's cube holder, with Empire's insignia on the bottom. This is how I imagine an artifact holder would look like in the Imperial Palace. Designed for a standard 56*56 mm Rubik's cube, it can smaller…
Large Coaster for soft/unstable foundation, I printed the insert with TPU. An Ikea "Avskild" coaster should also fit as a insert. Print Settings Rafts: No Supports: No Resolution: 0,2 Infill: 10 Filament: ECO PLA Some nice Notes: PLA and…
My entry for the ERRF 2021 Contest Mania, Maker Coin Challenge. Four pieces fit together to allow filament-change color changes to fully represent the EVAN Logo. Two inner pieces form the two faces of the coin. Two additional pieces screw…
The Future is Us. The Future is Now.
Someone I know works for this company and liked having a useful fridge magnet with their logo. The coasters were also handy. One of the coaster styles looks like a bada$$ gladiator helmet. Easy print, no supports or brim needed.…
I created these fridge magnets as merchandise and gifts for the Open Home Foundation Community Day 2026 in Buenos Aires, Argentina . The designs include: Home Assistant ESPHome Music Assistant Magnet Requirements Round magnets, 5 × 2 mm…
This model is Ai generated using Meshy Ai of the Foundation player icon from Fallout 76. I wanted to make Fallout cabochons for my beadwork. Printer: Elegoo Neptune 3 Pro Program: Cura 4.8.0 Size: 2500% Printing settings: Normal quality…
This kit turns a short print session into a proper concrete foundation for the Norlys Molde bollard (or any bollard with the same 110×50 mm cast-in bracket). The printed box stays around the concrete, so there is no demoulding and no…
Engineering STEP model by WebCAE for analysis and visualization. AI-assisted CAD design. Model files are provided in STEP format under CC BY 4.0.
Engineering STEP model by WebCAE for analysis and visualization. AI-assisted CAD design. Model files are provided in STEP format under CC BY 4.0.
Who wants to pay $15 for a replacement plastic peg?! Kiss my peg Casper! Now the world can have a free replacement peg! It's not a perfect replica, however it's a snug fit. I printed mine with 15% infill, PETG, at an angle with supports…
Someone I know works for this company and liked having a useful fridge magnet with their logo. The coasters were also handy. One of the coaster styles looks like a bada$$ gladiator helmet. Easy print, no supports or brim needed.…
I made this because i wanted to be able to make out a base design irl on my desk
These are the Temple Fortress -- Foundations Building Blocks, which go with four other additional groups of blocks and pieces in this set, including the Basic Blocks. See below for the links for the other groups of pieces. The Temple…
Boxes to use with the original insert for Foundations of Metropolis to keep everything in place and make it easier to distribute pieces. This is mainly for storing the game vertically or avoid spiling components when carrying the game.…
People I play with often have a hard time identifying the buildings once they're on the board, especially the Civic buildings of which the civic symbol is tiny, so I made these bands to make it easier to identify them at a glance. I used…
What you'll need: M5 x 30mm Screw x2 (Main bolt) M3 x 25mm Screw x2 (To attach the locking mechanism) 10x3 mm N38 Magnets x4 (To make them more secure (OPTIONAL!)) Category: Hand Tools
Brazen Head (Skull) from Foundation Series. What It Is: The Brazen Head is a holy relic worshipped by the Church of the Galactic Spirit and, more specifically, a robot-worshipping cult within it known as The Inheritance . Purpose &…
