P
PrintablesPeter Farell
Frost Wolf
Frost Wolf.
- Pobrania
- 1341
- Polubienia
- 303
- Ocena
- 5
Wyniki wyszukiwania: frost
697 modeli
P
PrintablesDZ
Frosthaven Character AoE (Area of Effect) Templates (All Character Remix)
This is a remix that uses the scad file provided but the original designer to make a template for every Frosthaven class. I added the Gcode for a .25 nozzle and noted the color I use for each character in the filename. note some…
- Pobrania
- 64
- Polubienia
- 6
- Ocena
- 0
P
PrintablesDrCamp
Frosthaven Hive Summon: Machine Bolter
Prints at a 45 degree angle in one piece with support to the bed only, or in two pieces that can be glued together. Separate and full STLs available, along with the gcode I used to print.
- Pobrania
- 60
- Polubienia
- 0
- Ocena
- 0
P
PrintablesHellfish
Smooth "Z-hop" Monster tray lids for Frosthaven (2 colors)
I liked Leon_H's Monster Trays but decided I didn't want to have raised text if they were being used for Monster HP counting, so I redesigned them to work with the “Z-hop” method. Check out CHEP's video on YouTube for instructions. In…
- Pobrania
- 57
- Polubienia
- 8
- Ocena
- 5
P
PrintablesExpance
Condition Tokens for Gloomhaven, Frosthaven, Jaws of the Lion
separate into parts for easy mmu coloring 1x3mm magnets press in. use a little glue if magnets are a little loose. My container for these tokens can be found here . these work with my miniature base and HP dial system will be adding…
- Pobrania
- 51
- Polubienia
- 4
- Ocena
- 5
P
Printablesslothmo
Flying Hex Stand - Gloomhaven/Frosthaven
A hex stand for flying units in Gloomhaven / Frosthaven. Made so they can fly above printed terrain pieces. You can stretch out the feet if you want a taller stand. There is a straight stand so the feet fix in a hex, and an angled stand…
- Pobrania
- 48
- Polubienia
- 2
- Ocena
- 0
P
Printablesices
Frostpendeln Sticker Katzenauge
Eine weitere Möglichkeit den wunderbaren Frostpendeln Sticker am Rad zu befestigen. Zur Montage werden 2 Stück M3*10 Schrauben und 2 Stück M3 Muttern benötigt. (Für besseren Halt 2 Stück M3*12 , 4 Stück M3 Unterlegscheiben und 2 Stück M3…
- Pobrania
- 14
- Polubienia
- 0
- Ocena
- 0
P
PrintablesPeter Farell
Emma Frost : Marvel
Emma Frost : Marvel Rivals Do not resize down: The cape will not print.
- Polubienia
- 5
- Ocena
- 0
P
PrintablesLeon_H
Frosthaven Insert
This Insert stores Frosthavens content in the original box without box lift and it is extremely optimized for fast setup. It is designed for the box with these dimensions: 16.14 x 11.81 x 9.84 inches or 41.0 x 30.0 x 25.0 cm The standard…
- Pobrania
- 3682
- Polubienia
- 357
- Ocena
- 5
P
Printablesmeet
Reusable Defrosting Hex Scraper
Popular hexagonal scraper - now for defrosting car windows You can choose between a regular version of the scraper (which is in one piece) and a version with replaceable "blades". Both modified to make the scraper stronger and to allow…
- Pobrania
- 3550
- Polubienia
- 1325
- Ocena
- 4,72
P
PrintablesWagZ
DeFrosty The Snowman
Drag the files in as 1 object and color as you wish. You can even do this with a basic single extruder style printer and just pause at a certain height and change to black filament to do his hat and eyes etc. Alternatively, you can print…
- Pobrania
- 3374
- Polubienia
- 1907
- Ocena
- 4,92
P
PrintablesMZ4250
Frost Giant Updated
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
- Pobrania
- 3010
- Polubienia
- 118
- Ocena
- 5
P
PrintablesRobagon3D
Wooden Crate for Gloomhaven & Frosthaven
Multi-material/Multi-color version pictured above available on my Gumroad Store Yet Another Wooden Crate. This is an overlay tile replacement for the board game Gloomhaven. Tile Count: 2 One version has a flat bottom for easier printing.…
- Pobrania
- 2582
- Polubienia
- 361
- Ocena
- 5
P
PrintablesVoxInaudita
Skyrim Frost Dragon
UPDATE APRIL 7 2018: I have replaced the hollowed parts with solid parts. If you've had trouble printing the hollow versions, this should help. Please let me know if you have any trouble printing the pieces. This is a model of a frost…
- Pobrania
- 2094
- Polubienia
- 528
- Ocena
- 5
P
Printablesrpgweb
The PERFECT Gloomhaven/Frosthaven standee- with optional magnets
This is the PERFECT Gloomhaven / Frosthaven / Jaws of the Lion standee! You can print this and rush to show it off to your wife, which will undoubtedly raise an eyebrow at your excitement, in complete disbelief at how great your next…
- Pobrania
- 1900
- Polubienia
- 288
- Ocena
- 4,75
P
PrintablesMZ4250
Rime of the Frostmaiden Collection (so far)
My takes on the NPCs and Creatures from Rime of the Frostmaiden are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast.…
- Pobrania
- 1767
- Polubienia
- 155
- Ocena
- 5
P
PrintablesKdyrja
Window defrost dash vent VW/Skoda/Audi/Seat
Window defrost dash vent VW passat b5/5.5 (golf IV), Audi B5/A4/A3 (8p1). Seat (leon/toledo),….. (only modeled, untested. Sorry) driver's side the passenger side must be mirrored Print instructions Unassociated tags: audi a3, b5.5, golf 4…
- Pobrania
- 1584
- Polubienia
- 136
- Ocena
- 5
P
PrintablesThe Reason
Frostmourne - Sword of the Lich King
Frostmourne is a sword from the game World of Warcraft. It's first bearer was the Lich King Arthas. The model is derived from the in-game model and because of that it doesen't precisely match the look of the one on most posters and other…
- Pobrania
- 1436
- Polubienia
- 228
- Ocena
- 4,6
P
Printablesminishaven
MagHex Ruined Dungeon Walls Gloomhaven Frosthaven
!! You will find more for free / pay what you want in my ko-fi shop !! Ruined dungeon walls for the MagHex system for use in Gloomhaven and Frosthaven. Contains a 3x3 mm MagHex base. Prints well on .2 and even on .3 layer height.…
- Pobrania
- 1362
- Polubienia
- 192
- Ocena
- 0
P
PrintablesDecorartor
Frosted Pine Vase
The "Frosted Pine" Vase embodies the serene elegance of winter, bringing a touch of festive charm to your home. Its rich emerald hue and intricately detailed pattern, inspired by pine branches, evoke the freshness of a forest dusted with…
- Pobrania
- 1337
- Polubienia
- 578
- Ocena
- 5
P
PrintablesTomek
Hex Frost Ice Scraper with TPU Water Wiper
Just another simple Ice scraper. Print main part flat with PETG or PLA (other materials should also work fine). Print smaller part with TPU/Flex. Join two parts together and voilà - here is your frost scraper. Also check my smaller remix…
- Pobrania
- 1307
- Polubienia
- 540
- Ocena
- 4,93
P
PrintablesSgtCaffran
Frosthaven monster standee base 59 HP (Gloomhaven/Boardgame Health Tracker)
Finally some prints of my own (12-08-23) I finally received my Prusa Mk4! I have the ability to rapid prototype a lot faster and have uploaded a new design with many small changes. The overall look hasn't changed but I'm getting good…
- Pobrania
- 1178
- Polubienia
- 166
- Ocena
- 4,63
P
PrintablesRobagon3D
Barrels for Frosthaven
Complete Barrel Pack can be found on my Gumroad store or in my Printables Club . It includes a higher detailed version of my original barrel, now with corded rope, and some multi-barrel models. Less than 10 percent of people who download…
- Pobrania
- 1017
- Polubienia
- 160
- Ocena
- 5
P
PrintablesRobagon3D
Rubble for Gloomhaven & Frosthaven
This is a Rubble overlay tile replacement for the boardgames Gloomhaven & Frosthaven. It has small flat section on top for easy monster landing and like my other models no supports needed. In-Game Info Tile Name: Rubble Gloomhaven Tile…
- Pobrania
- 965
- Polubienia
- 138
- Ocena
- 5
P
Printableseduardo_h_yos
Dummy 13 Wanzer Frost
Description: Dummy 13 frame adapted to Wanzer Frost armor. Printing: Dummy 13 printing tips applies to this model. The part file notes have comments. Some parts requires support and 100% infil. Please be advised, compared to Dummy 13, it…
- Pobrania
- 817
- Polubienia
- 300
- Ocena
- 4
P
PrintablesNR
Vanity storage trays for Frosthaven monster standees
Trays to hold your Frosthaven enemies Together, these two trays hold all the standees for the normal and elite monsters that come with Frosthaven (https://cephalofair.com/pages/frosthaven). Each group of monsters has its own niche which…
- Pobrania
- 776
- Polubienia
- 47
- Ocena
- 5
P
PrintablesOrion3D Studios
Frosthaven/Gloomhaven/JotL Dashboard
The edges are beveled so it isn't harsh on your cards. It is designed to fit cards with or without card sleeves.
- Pobrania
- 756
- Polubienia
- 90
- Ocena
- 5
P
PrintablesVitalii Yaroshenko
Frostmourne with stand
I found a model of a sword without copyright in a user with the nickname Xadro. I made a stand for it myself in 3dsmax.
- Pobrania
- 752
- Polubienia
- 52
- Ocena
- 4
P
PrintablesNR
Frosthaven display organizer and storage for overlay tiles
Overview The model is meant for storage and organization of Frosthaven's overlay tiles. The organizer replaces one of the stock inserts that come in the box. The value of the organizer is that each set of overlay tiles is displayed in its…
- Pobrania
- 733
- Polubienia
- 55
- Ocena
- 5
P
PrintablesPeter Farell
Warrior Cat. Riverclan Hawkfrost.
Warrior Cat. Riverclan Hawkfrost.
- Pobrania
- 717
- Polubienia
- 98
- Ocena
- 5
P
PrintablesPrintedByMark
Frostclaw from Horizon Zero Dawn
Introducing the Frostclaw from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 60mm base. Use with the Frozen Wilds expansion during gameplay for a cosmetic 2 legged stance. It is intended to be…
- Pobrania
- 689
- Polubienia
- 116
- Ocena
- 0
P
PrintablesRobagon3D
Nest for Gloomhaven & Frosthaven
This is a Nest with bones overlay tile replacement for the boardgames Gloomhaven & Frosthaven. It has a flat top for easy monster landing and like my other models no supports needed. In-Game Info Tile Name: Nest Gloomhaven Tile Count: 4…
- Pobrania
- 684
- Polubienia
- 106
- Ocena
- 4,89
P
PrintablesRoland Brandt
Frostbound Witch
A 3D printable witch encased in jagged ice shards that rise into a crystalline pedestal. Her staff is fused into the ice, ensuring durability and one-piece stability. Model was tested in Orca Slicer for printability. Just scale it up to…
- Pobrania
- 638
- Polubienia
- 113
- Ocena
- 4,5
P
Printablesnetwalk
Blumenkübel Füße, Frostschutz, Entwässerung, sehr belastbar, Plant Pot Feet
Update vom 01.08.2024: Größe “S” hinzugefügt. _________________________________________________________________________ Diese Füße sind für Blumenkübel gedacht, um im Winter Frostschutz zu bieten. Im Sommer helfen sie Staunässe zu…
- Pobrania
- 619
- Polubienia
- 58
- Ocena
- 5
P
Printablesminishaven
Frosthaven modular Ship Boat
!! You will find more for free / pay what you want in my ko-fi shop !! Modular boat scenery for Frosthaven. Split into front and rear. Will eventually be expanded with more assets to combine with the MagHex system. SIDE and WALL pieces…
- Pobrania
- 573
- Polubienia
- 126
- Ocena
- 4,8
P
PrintablesAvatarRubix
Frosthaven AoE Overlays
Frosthaven included AoE abilities with complicated shapes that can be difficult to line up by eye. So I made these simple overlays that cover all non-trivially-shaped AoE abilities amongst three of the starter classes up to level 9. The…
- Pobrania
- 569
- Polubienia
- 58
- Ocena
- 4,75
P
PrintablesSpielkind
Fritz Frosty the snowman
Hallo, darf ich vorstellen, das ist Fritz Frosti . Fritz Frosti möchte euch Spass und Freude bringen. Er bringt auch noch seinen Tannenbaum mit. Je mehr Brüder er bekommt, desto glücklicher wird er. Spielt mit ihm, tut ihn in den…
- Pobrania
- 561
- Polubienia
- 48
- Ocena
- 5
P
Printableszackyancey
Frosthaven Class Storage Boxes
These boxes can be used to store the components for Frosthaven classes. This page contains the character-specific files meant to be used with the base box here . For each box you will need to print 3 models: one of the…
- Pobrania
- 529
- Polubienia
- 66
- Ocena
- 5
P
Printablesiizu
Honda Acty Defrost Vent Gauge Pod - 52mm
Designed this to fit a glowshift tachometer but it should fit any 52mm gauge. I wanted the print to come out cleaner so I split it into two halves. The hardware I used to combine them: 2x M3 - 5mm Threaded inserts 2x M3 - 6'ish mm Bolts…
- Pobrania
- 524
- Polubienia
- 41
- Ocena
- 5
P
PrintablesSortirus
Frostpunk Board Game Insert / Organizer
If you want, you can help me with designing inserts by donating here: https://www.paypal.com/donate/?hosted_button_id=J2YS7MREH8MU8 Hello, for those that don't know my ‘insert philosophy’ - I am creating modular inserts that are focused…
- Pobrania
- 522
- Polubienia
- 76
- Ocena
- 4,6
P
PrintablesVirtuallyJason
Frosthaven: Shambling Skeleton
Here's my take on the Frosthaven summon (from the starting class, the Boneshaper), the Shambling Skeleton! I did my best to make this guy as printer-friendly as possible, but as you can see, it still needs some supports. That said, it's…
- Pobrania
- 517
- Polubienia
- 56
- Ocena
- 5
P
PrintablesVirtuallyJason
Frosthaven Algox Guard
Here's my interpretation of the Frosthaven monster, the Algox Guard! The best image that I was able to find of the official artwork is incredibly low resolution, so I took some artistic liberties with this one. I decided that it would be…
- Pobrania
- 490
- Polubienia
- 42
- Ocena
- 5
P
Printablesminishaven
MagHex Wood Walls Gloomhaven Frosthaven
!! You will find more add-ons for free / pay what you want in my ko-fi shop !! Wooden Walls for the MagHex system. Intended to use in Gloomhaven nd Frosthaven. Regular MagHex bases (3x3 mm magnets) are included. Prints well on .2 and even…
- Pobrania
- 484
- Polubienia
- 64
- Ocena
- 0
P
PrintablesRobagon3D
Ship's Mast for Frosthaven
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. It means a lot, and us designers really appreciate it. Premium version can be found on my…
- Pobrania
- 483
- Polubienia
- 45
- Ocena
- 5
P
PrintablesKotvic
Frostpunk board game organiser
Hello, this is my design of Frostpunk board game insert, that fits into original game box. It adds dedicated space for board hex pieces and other small bits. Size of this insert is slightly larger, than “buildings board”, that is used as…
- Pobrania
- 469
- Polubienia
- 49
- Ocena
- 4,75
P
Printablestille
Frosterfach-Offenhalter für Thetford-Kühlschrank N4142E + Version 2
Ich habe mich immer geärgert, dass das Eisfach des Thetford-Kühlschranks nicht offen blieb, wenn wir das Fahrzeug in den Winterschlaf geschickt haben. Natürlich geht auch ein Korken. Diese Ecke bleibt aber, wo sie hin soll. Mein…
- Pobrania
- 458
- Polubienia
- 40
- Ocena
- 5
P
PrintablesTetsuBo
Frosthaven Monster deck and standee storage
Description This is a storage solution for the Frosthaven monster ability decks, monster standees and monster initiative order tokens. It is made to fit sleeved cards. It does not include the generic ability decks for Priests, Scouts,…
- Pobrania
- 440
- Polubienia
- 36
- Ocena
- 5
P
PrintablesSanford Prime
Frosting Piping Ends - Lock On
These are the BEST! No running to the store, except for more frosting! I can feel the Sugar Buzz already… The possibilities are endless, create any piping design you desire and print it in about 5 minutes to add the perfect flare to…
- Pobrania
- 427
- Polubienia
- 52
- Ocena
- 5
P
PrintablesZenpy
Map Aligners for Frosthaven Board and Map Tiles
Simple alignment clips for helping to hold the board tiles together, in case you have warped tiles. Works for both Frosthaven dungeon tiles and the Frosthaven campaign map as they have the same thickness (2mm) Hex aligner version is…
- Pobrania
- 420
- Polubienia
- 51
- Ocena
- 5
P
Printablesminishaven
Bandit Guards pre-suppported Gloomhaven Frosthaven Monsters
A remix of EmanG's Heathen Raiders I use as Bandit Guards in Gloomhaven and Frosthaven. Pre-supported for resin printing. Prints without base. I recommend using ABS-like resin for these models as their weapons tend to break easily if…
- Pobrania
- 387
- Polubienia
- 39
- Ocena
- 0
P
PrintablesValhalalala
Starting Hexes for Gloomhaven, Jaws of the Lion, The Crimson Scales, and Frosthaven.
I was looking for some entry and exit tiles to print for our Gloomhaven sessions but couldn't find any. Therefore, I created them according to the designs in Jaws of the Lion, Gloomhaven, and Frosthaven rule books. These tiles fit the…
- Pobrania
- 384
- Polubienia
- 51
- Ocena
- 0
P
PrintablesVirtuallyJason
Frosthaven Algox Archer
Hi everyone - here's my first Frosthaven model! I've always loved the Inox, so it's no surprise that I also love the Algox. So, here's my printable proxy model for the Algox Archer; maybe we can get these things all built out before the…
- Pobrania
- 379
- Polubienia
- 38
- Ocena
- 5
P
PrintablesMr25Days
Frosthaven/Gloomhaven Terrain Type Markers
I was annoyed that Frosthaven uses the same overlay tile as different types of terrain so I made these little overlays to drop down to match the rulebook. It makes seeing terrain types easier at a glance. I designed them for a .4mm nozzle…
- Pobrania
- 372
- Polubienia
- 56
- Ocena
- 4,67
P
Printablesminishaven
Ice Pillars Frosthaven MagHex
I remixed the original Ice Pillars made by jutsus to fit into MagHex tiles. Added a flat surface to allow figures to stand on them. I recommed printing upside down in vase mode, using transparent pla+.
- Pobrania
- 368
- Polubienia
- 41
- Ocena
- 5
P
PrintablesBundus
Gloomhaven Frosthaven Status Token Holder
A very simple non-destructive way of attaching status effect tokens to monster standees. Quick print, likely need ~20 or so. They can be used in multiple ways if space gets tight on the board.
- Pobrania
- 367
- Polubienia
- 35
- Ocena
- 5
P
PrintablesInventorEvan
Frosthaven Ice Pillar Miniature
Ice Pillar for Frosthaven, with flat top for jumping/flying monsters. I print this in clear PETG for that icy look, with 0.12mm resolution. If you print upside down (icicles pointing up), you shouldn't need supports, I've made all the…
- Pobrania
- 360
- Polubienia
- 56
- Ocena
- 5
P
PrintablesMaggus
Mülltonnen-Frostschutz (trash bin antifreeze)
Diese Clips minimieren die Auflagefläche eines Mülltonnendeckels und verhindern so das Festfrieren. Paarweise gedruckt in Petg und custom-made für meine Sulo(?) Mülltonnen 80 L / 120 L und 240 L. Erste Leerung haben sie problemlos…
- Pobrania
- 358
- Polubienia
- 41
- Ocena
- 5
P
Printablesrpgweb
Gloomhaven / Frosthaven stackable Monster deck holder
This is a monster attack deck holder for Gloomhaven and/or Frosthaven. Main features of the deck holder: The holders are stackable to take less space The fusion 360 model file is included, if you do a remix, please post your modified…
- Pobrania
- 351
- Polubienia
- 35
- Ocena
- 4,5
P
PrintablesLayer By Layer
FrostCore
Support me: Post a Make and Comment PayPal Venmo: @paulorfo Cash App: $paulorfo ------------------------------------------- This is more than just a can cooler. Most can coolers only insulate your drink—they don’t actually cool it. This…
- Pobrania
- 336
- Polubienia
- 333
- Ocena
- 5
P
PrintablesVirtuallyJason
Frosthaven Summon: Bone Horde
Here's my proxy for the Frosthaven Bone Shaper summon, the Bone Horde! The various sword arms need supports, as do several chins. Depending on your bed adhesion, you may want to add some supports near the bottom of the legs to help keep…
- Pobrania
- 334
- Polubienia
- 25
- Ocena
- 0
P
Printablesminishaven
Ice Spikes Frosthaven MagHex
I remixed the original Ice Spikes by bdworks4 to create a more even surface so that a figure can stand on the terrain and I added a base to make them fit into MaxHex tiles.
- Pobrania
- 334
- Polubienia
- 33
- Ocena
- 5
P
PrintablesSkeleton Dan
Jack Frost from Shin Megami Tensai
Jack Frost from Shin Megami Tensai
- Pobrania
- 330
- Polubienia
- 17
- Ocena
- 0
P
PrintablesMZ4250
Frost Giants 2025
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://mz4250.com/ Patrons have access to all my files in one place, a request…
- Pobrania
- 324
- Polubienia
- 54
- Ocena
- 5
P
PrintablesDub + Jub 3D prints
Frosty the Frostopus!
Made a popular Halloween themed octopus. Now comes the Christmas theme!
- Pobrania
- 320
- Polubienia
- 83
- Ocena
- 5
P
PrintablesVirtuallyJason
Frosthaven Summon: Wraith Proxy
Here's my proxy model for the Frosthaven summon, the Wraith! This could be used fairly well for the OG Gloomhaven monster, the Living Spirit, or even for any sort of wandering spirit in a DnD game =) The chains needed a ridiculous amount…
- Pobrania
- 318
- Polubienia
- 23
- Ocena
- 5
P
PrintablesSpool Designs
Snowflake Earrings & Ornaments | Frosty Creations | 3 Minute Print
Elevate your winter style with our Snowflake Earrings or Ornament! These intricate snowflakes are designed to be the perfect addition to your festive look. Printed to a size that's ideal for earrings, they can easily be assembled with…
- Pobrania
- 312
- Polubienia
- 193
- Ocena
- 5
P
PrintablesScott Frazer
Frosthaven Organizer
I'm reusing the monster boxes and the character boxes from Qualith's Gloomhaven: Jaws of the Lion insert. If you like/rate this model, be sure to like/rate theirs as well! When I kickstarted Frosthaven, I selected an organization system…
- Pobrania
- 307
- Polubienia
- 26
- Ocena
- 0
P
PrintablesVirtuallyJason
Frosthaven Algox Priest (Shaman)
Here's my proxy model for the Algox Priest monster from Frosthaven! This is a remix of my Archer model, done up to be nice and shamany =) As always, the .blend file and pre-supported .3mf (including the one that I used to print this on my…
- Pobrania
- 306
- Polubienia
- 26
- Ocena
- 0
P
PrintablesSarah R.
Token of Death - Frosthaven Deathwalker Enemy Marker
The Deathwalker class in Frosthaven has a mechanic that allows a specific enemy to be a target, but trying to keep the little round class marker on the standee base was very frustrating. This little clip is remixed from a marker that…
- Pobrania
- 303
- Polubienia
- 21
- Ocena
- 0
P
Printablestonybruce
Frosthaven Monster Organizer
There are 48 different monsters in Frosthaven, plus the bosses, and having to go sifting through bags to find them is a pain. I designed this set of shelves and drawers for storing and organizing all of the monsters and bosses of…
- Pobrania
- 302
- Polubienia
- 37
- Ocena
- 5
P
PrintablesVirtuallyJason
Frosthaven Monster Proxy: Algox Icespeaker
Here's my proxy model for the Frosthaven monster, the Algox Icespeaker! This guy needs a fair amount of support, especially under the axes. Make sure that you also get his upper fangs and a bit of his right horn! As always, the .blend…
- Pobrania
- 298
- Polubienia
- 30
- Ocena
- 5
P
PrintablesMichal Stříž
Magnetic Frosthaven/Gloomhaven standees - Second Edition!
This is a complete rework of the "PERFECT Gloomhaven/Frosthaven Standee Set with MAGNETS". It is better in every way. Main features: HP counter visible from both sides! Rounded edges of monster and conditions holder (should not scratch…
- Pobrania
- 296
- Polubienia
- 45
- Ocena
- 2
P
Printablesminishaven
MagHex Metal Walls Gloomhaven Frosthaven
Ancient metal walls for the MagHex system for use in Frosthaven. Regular MagHex bases (3x3 mm magnets) are included. Release October 20, 2023 2 and 3 tile straight walls Corners
- Pobrania
- 293
- Polubienia
- 39
- Ocena
- 0
P
PrintablesJohn Miller
Frost Buddy Can Insert
Do you have a frost Buddy for tall bottles and wish you could hold a can in it well now you can with this here handy dandy frost buddy can insert holder thing-o-mojig. slide it into the bottom of our frost buddy and Blam you can hold your…
- Pobrania
- 286
- Polubienia
- 12
- Ocena
- 0
P
PrintablesVirtuallyJason
Frosthaven Algox Scout
Here's my interpretation of the Frosthaven monster, the Algox Scout! I had a lot of fun making this one, especially figuring out the pose. I wanted to try and capture him just after launching an attack from his sling, and I think that the…
- Pobrania
- 283
- Polubienia
- 21
- Ocena
- 4
P
Printablesminishaven
Frosthaven Deathwalker Shadow token
Deathwalker's shadow overlay. Nothing else to say here.
- Pobrania
- 280
- Polubienia
- 30
- Ocena
- 5
P
PrintablesInventorEvan
Frosthaven snow wall with removeable door
Looking online I found lots of Gloomhaven walls with removeable doors, but none for Frosthaven that model the “snow door” concept. I print this in white PLA with a 0.12mm layer height, 10% infill. Support should not be necessary. Both…
- Pobrania
- 278
- Polubienia
- 22
- Ocena
- 5
P
PrintablesVirtuallyJason
Frosthaven Summon: Raging Corpse
Hey everyone - here's my take on the Frosthaven summon, the Raging Corpse! As always, the .blend file and any pre-supported .3mf (including the one that I used to print this on my Prusa MK3, although the support points should work for SLA…
- Pobrania
- 274
- Polubienia
- 20
- Ocena
- 0
P
PrintablesVirtuallyJason
Gloomhaven Monster: Frost Demon
I ran my first ever Community Choice model vote over on my Patreon and the results were overwhelmingly in favor of the Gloomhaven Frost Demon, so here it is! As always, I tried to take inspiration from the original artwork, rather than…
- Pobrania
- 273
- Polubienia
- 24
- Ocena
- 5
P
PrintablesJedi Greg
Gloomhaven and Frosthaven Treasure Chest scaled
Gloomhaven and Frosthaven Treasure Chest scaled to be better sized in comparison to the standees and miniatures - remixed.
- Pobrania
- 265
- Polubienia
- 16
- Ocena
- 5
P
PrintablesAnycubic Community
Frost Dragon by Anycubic
Follow Anycubic for more quality models. Category: Animals
- Pobrania
- 264
- Polubienia
- 44
- Ocena
- 0
P
PrintablesVirtuallyJason
Frosthaven Boss Proxy: Fish King
Here's my proxy model for the Frosthaven boss, the Fish King! I was so happy with how the net worked out for the Herder that I figured that I should go ahead and include one here, too. Since capes look really cool on miniatures, I figured…
- Pobrania
- 263
- Polubienia
- 40
- Ocena
- 5
P
PrintablesLeon_H
German Translation - Frosthaven Insert
This is a German translation of all non language neutral components of the Frosthaven Insert. The following objects are included: Monster Trays and Monster Initiative Tokens for Guards, Imps, Priests and Scouts All Card Dividers except…
- Pobrania
- 263
- Polubienia
- 26
- Ocena
- 5
P
PrintablesVinceCZ
Ježibaba z Mrazíka - Baba Yaga from Jack Frost
Model https://www.myminifactory.com/object/3d-print-witch-30075 bez podstavce. Mám rád modely, kde podpory jsou pouze z tiskové plochy. Lze to namodelovat v CURA tak, ze si manuálně zvolíte podpěry pro vše co by se jinak tisklo “ve…
- Pobrania
- 252
- Polubienia
- 30
- Ocena
- 0
P
Printablesminishaven
Large Crystal Frosthaven
Large 3 tile crystal. Print with transparent pla+ for a transparent look. I glued the crystal to some MagHex tiles to fit them into the MagHex system.
- Pobrania
- 250
- Polubienia
- 26
- Ocena
- 5
P
PrintablesSchlossbauer
Frost Worm
A Frost Worm. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
- Pobrania
- 243
- Polubienia
- 40
- Ocena
- 5
P
PrintablesVirtuallyJason
Frosthaven Summon: Stitched Atrocity
Here's my take on the Boneshaper Summon, the Stitched Atrocity! This guy's pretty disturbing and generally prints without needing supports, but I put a couple on its lower legs just to give it a bit more stability during the printing…
- Pobrania
- 240
- Polubienia
- 22
- Ocena
- 4,5
P
PrintablesFirewood Loki
Loot Token for Frosthaven (Maghex)
Loot Token for Frosthaven. I prefer a traditional RPG loot bag more than a postman case, so I remixed eleode's model for maghex. Updated version 2 as I accidentally found out that ball-shaped holes work better than the original one.
- Pobrania
- 237
- Polubienia
- 26
- Ocena
- 0
P
PrintablesInventorEvan
Frosthaven Control Panel (steampunk / robots)
Several Frosthaven scenarios with ancient robots call for one or more Control Panels. I based this model on the art from the 2D cardboard version. Should print just fine in PLA, but support is probably required. I print at 0.12mm for…
- Pobrania
- 231
- Polubienia
- 24
- Ocena
- 0
P
PrintablesVirtuallyJason
Frosthaven Monster Proxy: Algox Snowspeaker
Here's my take on the Frosthaven monster, the Algox Snowspeaker! The artwork for this guy has him looming up like a genie from a swirl of snow, so I decided to really lean into that image with my model. I hope you enjoy it! As always, the…
- Pobrania
- 228
- Polubienia
- 25
- Ocena
- 0
P
PrintablesVirtuallyJason
Frosthaven Flaming Bladespinner
Here's my take on the Flaming Bladespinner monster from Frosthaven! I printed it in two halves, so that no support would be required. I put a key and slot in that version to help line it up, but depending on your first layer squish you…
- Pobrania
- 226
- Polubienia
- 18
- Ocena
- 0
P
PrintablesVirtuallyJason
Frosthaven Summons: Banner of Courage
Here's my model for the Frosthaven summons, the Banner of Courage! This guy ended up needing a lot more support than I was hoping it would, but that's the way the cookie crumbles sometimes. It was a great learning experience, which I'm…
- Pobrania
- 226
- Polubienia
- 27
- Ocena
- 5
P
PrintablesVirtuallyJason
Frosthaven Summons: Banner of Strength
Here's my proxy model for the Frosthaven Summons, the Banner of Strength! The artwork for this model is at https://github.com/any2cards/frosthaven/blob/master/images/art/frosthaven/characters/summons/fh-summon-banner-of-strength-front.png…
- Pobrania
- 226
- Polubienia
- 29
- Ocena
- 5
P
PrintablesNotaBrick
Frosthaven character box insert / organiser
I produced this insert to organise and store the character tokens and cards in their original boxes with included space for card sleeves. Most areas of packing are self explanatory, the small extra etails include; A small cut out above…
- Pobrania
- 225
- Polubienia
- 14
- Ocena
- 0
P
PrintablesVirtuallyJason
Frosthaven Summons: Banner of Hope
Here's my proxy model for the Frosthaven Summons, the Banner of Hope! The artwork for this banner is at https://github.com/any2cards/frosthaven/blob/master/images/art/frosthaven/characters/summons/fh-summon-banner-of-hope-front.png; I…
- Pobrania
- 225
- Polubienia
- 24
- Ocena
- 5
P
PrintablesVirtuallyJason
Frosthaven Algox Boss Proxy
Hey everyone - here's my model for the Frosthaven Algox boss! I'll avoid saying too much about the model in order to avoid any potential spoilers, but I just want to give some quick printing advice: make sure that there's some support…
- Pobrania
- 223
- Polubienia
- 26
- Ocena
- 5
P
PrintablesVirtuallyJason
Frosthaven: Abael Herder Proxy
Here's my proxy model for the Abael Herder! I included two versions of this model, one with a bone helmet that's a bit closer to the artwork, and one with a bandana. This model pretty much requires SLA or a 0.25mm nozzle (or smaller) for…
- Pobrania
- 221
- Polubienia
- 25
- Ocena
- 0
P
Printableskrzysztof.k
Frosthaven counter standee top - Remix with modifiers
This is modified version of top standee part of counter . The changes are only on top counter part and enhance the original project with four slots for modifier tokens.
- Pobrania
- 220
- Polubienia
- 20
- Ocena
- 4
P
PrintablesVirtuallyJason
Frosthaven Boss Proxy: Lord of Chaos
Here's my model for the Frosthaven Boss, the Lord of Chaos! I made it as self-supporting as possible, but there's still several outstretched limbs that're gonna need supports. Fortunately, none of the “interior” of the model has overhangs…
- Pobrania
- 219
- Polubienia
- 36
- Ocena
- 5
P
PrintablesVirtuallyJason
Frosthaven: Piranha Pig
Here's my take on the Frosthaven monster, the Piranha Pig! I'm still working out ways to better print this guy, but the best that I've found so far is to print the body and the head separately, with the head facing upwards. So, I've got…
- Pobrania
- 214
- Polubienia
- 16
- Ocena
- 0