Grille aération pour tuyau P.V.C 100 mm V3- Ventilation grid for 100 mm P.V.C pipe
Grille aération pour tuyau P.V.C1 00 mm. Diamètre de la grille 93 mm Ext pour vide sanitaire ou autres.
- Pobrania
- 779
- Polubienia
- 63
- Ocena
- 4,67
517 modeli
Grille aération pour tuyau P.V.C1 00 mm. Diamètre de la grille 93 mm Ext pour vide sanitaire ou autres.
Another option for a floor vent cover for the rear-facing vents under the seats. Recommend printing in PETG or ASA, and move the seat all the way forward and up to clip onto the vent duct. Small tabs hold it in place. This has been tested…
This is a ventilation cover/grille designed for air inlets, outlets, ventilation openings or similar technical applications. The outer size is 280 × 220 mm . The model includes two frame-height variants: 8 mm and 12 mm . The lower mesh…
Took the grille insert that @mbarvo made and turned it into two parts to make it easy to change the pattern of the grille to the infill select. You'll want to go to the original…
This is a replacement part for the rain gauge cone on the Davis Vantage Pro/2 weather station. It prevents debris from entering the rain gauge and potentially blocking the rain gauge. It sits directly on the bottom of the cone and can be…
Simply scale the model according to your preference. Obviously, no supports or brims are required for printing. I added some extra perimeters for additional rigidity.
This is fan grille cover for Guzzanti portable car refrigerator. When placed in the car trunk, depending on the type of vehicle, the cover may stick to the fan grille, causing the refrigerator to overheat and burn out the fuse. This cover…
Helper element for preventing a gate to prevent babies and toddlers to enter/ leave a room or fall down stairs from sliding of the door frame. My door frame is ~75-78 mm wide, the whole has a diameter of 35.5 mm. All dimensions can be…
When I added a hexagonal mesh to the Voron's skirts, I also wanted that look and the added protection for the fan grills. So I designed this model to fit my needs: Provide a sturdy mesh that won't break accidentally Modular to play around…
Air Ventilation Grille / Grid - Collection (rectangular - round) - Griglia di ventilazione misure varie (rettangolare - tonda) Dimensional measures: Hex 100mm Ø100mm 100x100mm 100x200mm 100x200mm Vertical (NEW) 125x150mm 150x150mm…
8/15/26 Update: I've since learned that the grille on the bottom isn't for cooling any electronics—It's just a hole that goes through the bottom of the machine for no apparent reason. Added a solid cover print profile to help retain heat…
Dash air vent grille for Volkswagen Transporter T4. Replaces original part 701819071 or 701819072. Added top honeycomb to prevent objects from falling into the vent. The attached model is intended for the right side, to print the left…
This model is compatible with the lego system.
Front logo for a 2004 VW Golf. Might fit other cars, I have no idea. Created for a coworker whose Golf didn't have a badge. Three pieces: Front logo. Mounts with a single M5x10 screw in the center. This part is available in two varieties:…
I adapted the Elegoo Centauri Carbon Printhead Fan cover (credit: magedark) to utilize the High-Efficiency fan grille STL developed by Noctua (credit: Noctua_at). I'm not sure about any actual efficiency gains from this fan, but according…
Honeycomb Grilles These are a couple of honeycomb ventilation grilles I designed to create some airflow in the electronics cupboard of my van. They are designed to fit a square hole of size 150 x 100 mm or 200 x 60 mm and are fixed in…
Here is a 3D printable sliding ventilation grille, which is also available in stainless steel. There is also a matching router template to create the perfect cut-out for the grille. Simply screw the template to the desired mounting point,…
Ein Ersatzteil, falls das alte brökelig wird und keine Gitter mehr besitzt. Ich habe meines mit einem schwarzen ABS Filament gedruckt, da es besser für outdoor geeignet ist. Veränderungen dürfen gerne vorgenommen werden.
This model is compatible with the lego system.
Designed a couple grilles for the H10 optic. I printed them in both asa and pla and they both printed out great.
Heizungs- /Lüftungsgitter – Ventilation Grille Deutsch: Design als Lüftungsgitter für Schreibtische oder Küchenarbeitsplatten wenn der Heizkörper überbaut wurde. Gedruckt in PETG-CF English: Design as a ventilation grille for desks or…
Jednoduchá mriežka na ventilačné potrubie KG110. Ak sa ti model páči klikni na srdiečko a keď ho vytlačíš ohodnoť hviezdičkami a prilož fotku. Ďakujem. Simple ventilation grille KG110. If you like the model, click on the heart and when…
These letters can be printed in a multitude of colors from the iconic green-white-red to a more simplistic all white. Switching colors during printing is required to obtain color difference. Letter mounts are placed on the back of the…
I have replaced the original ventilation grilles with these, as this variant is more space-saving in conjunction with our interior. Since I own a Mini+, I have divided the model into two parts. PLA works fine for me. No support.
Ventilation Grille - Duct Cover - Griglia ventilazione a bocca di lupo Dimensional measures: 105x105mm 105x210mm 210x210mm 210x105mm Ø105mm Resize to adjust dimension All our designs are free to download and use. Your support fuels our…
Replacement Toyota emblem for a 2nd generation (2005-2011) Tacoma. The back "fill" piece has two slots built in for cable ties to pass through to secure to the grille. I have included a 1 piece file which you can do a layer change on for…
Here is an adjustable blower or ventilation grille, I designed it for a chicken coop, but you can use it for other applications, hole diameter Ø65mm and M6 screw preferably with a lock nut. Enjoy ;-)
This model is compatible with the lego system.
Ventilation grille 120mm built-in I created a ventilation grille to replace some old damaged grids. Conical joint. Print Info Without supports. layer: 0.2mm infill: 15-20% material: PETG or ABS for better outdoor strength maybe ASA would…
Makes Seat Models Ibiza mk3 Typ 6L 2002-2008 I was printed it from ASA in one piece in P1S
This is a replacement emblem for the front of a Chevrolet Trailblazer. Mine fell off of my 2007 Trailblazer SS. It's designed to have 2 M5 brass threaded head inserts installed on the back, you will need 2 M5 screws and washers, too.…
Air grille / Ventilation grille Voronoi effect x y z 120,00 80,00 7,00 mm Additional notes If you like this design, please give me a like and post makes.
Built a Dayton Audio MKBoom Portable Bluetooth Speaker Kit from Parts-Express and I needed to protect the speakers a bit from inadvertent contact. These grilles are for speaker part numbers: 4" woofer TCP115-4 3/4" tweeter TD20F-4 Print…
Ventilation grille, e.g. for a tool shed, to prevent high humidity. Use 2 per room. One at ceiling height, one at foot level. I glued it into a rectangular cut-out and used netting to keep the insects out.
I found some files for the jeep rancher angry eyes but they were separate and required super gluing or screwing on. I had issues printing these and getting it to look clean due to supports being needed so I combined the two models and…
I don't know if I should even share these, as they are far too awesome for the general public to handle. BUT! I think Optimus would want it this way. So, here they are: AUTOBOT BADGES FOR YOUR VANAGON! These fit an '88 VW Vanagon 2WD (I…
Ventilation grille for a wall mounted hot air exhaust with 120 mm diameter. You can print the cutout template to get the correct hole size with a Dremel.
The “real” Volkswagen counterparts to these models have a propensity to spontaneously vanish from the vehicle, due to aging plastics and a harsh, vibration- and wind-heavy environment. I have literally never seen an actively-driven…
This grille is for the 3DSets Model 14 “MAX Team Van” aka the “A-Team Van”. It will replace the Grill labelled “MAX” with the “GMC"-labelled version that you need for the A-Team Van (or any othe GMC Express Van).
This model is compatible with the lego system.
Update 2023-05-30 Added UHF version Printing instructions One color - Use normal Voron printing guidelines Material: ABS Layer height: 0.2mm Extrusion width: 0.4mm Infill type: Grid, Gyriod, Honeycomb, Triangle or Cube Infill percentage:…
Simple Jeep Wrangler JL/JLU grille keychain. Just loop your key ring through the headlight.
As we would like to go to camping and sleep in our T7 Multivan (2023), we just needed something for the ventilation… Some kind of window adapter… So this is the result of our idea and my first own design This ventilation grille is…
I'm a happy owner of the Drop BMR1 Nearfield desktop speakers (even though it is a bit of a Kickstarter-like experience and not everyone is happy - but then, it's nearly impossible to make everyone happy anyway). They did have an optional…
At Jeep-themed events its not uncommon to see ‘flocks’ of rubber ducks set upon vehicles or passed out to drivers. Here's a duck you can hand out that's quick and easy to print. If you want your printed ducks to survive the summer sun on…
Ventilation grille 200x200mm for exterior use. Must be print in PETG UV resistent or equivalent. I used this grille to hide a Ø150mm ventilation pipe. I instal an anti-insect mesh between the grille and the wall.
Simple and effective ventilation grille.
Warning Already not printed, modeling seems to be ok but it should be tested in the real life. Definition None. Printing Is required the same printer size than 3D SETS has defined. Use the same setting than 3D SETS Middle Grille for the…
Snapmaker U1 Toolhead Fan Grille No support needed to print. Friction fit. Does not hit the fan. Recommend to use something sturdier than PLA if using in enclosed chamber.
Square Overlapping Ventilation Grille with Insect Net - Collection - Upgrade your outdoor ventilation system with our robust Square Ventilation Grille , featuring an overlap profile and a built-in insect net. Engineered for exterior…
I reccomend that you print this out of PETG and also salvage and stick the original dust protective mesh onto the back of this one to protect your headphones driver.
Air grille / Ventilation Grille 198.92mm x 70.57mm x 9.32mm Additional notes If you like this design, please give me a like and post makes.
Air ventilation grid grille vertical rectangular, bracket (recommended with supports) and inner grid (4 types: bars and holes 3mm or 4mm, only holes 3mm or 4mm). Notes: Depending on the finish of the 3D print, one bracket or another is…
There's a zillion fan covers/grilles on here. So what is special about this one? Absolutely nothin'! Except it stylistically matches the lid of my WiFi Duet enclosure over here: https://www.thingiverse.com/thing:2495198 Category: 3D…
This is a ventilation grille for 50mm pipe - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i Facebooku Zapraszam: https://www.magazynowanie-energii.com - Lista wszystkich urządzeń, które posiadam Zapraszam…
This model is compatible with the lego system.
Made for bolts, as you probably won't find clips anymore. Mirror for left / right orientation. Barely fits on an Ender 3, but you can make it work. ;)
I needed a litterbox for my pet rat. Design objectives: -as small as possible for easy removal through my small cage door, possibly with one hand -can be repurposed as housing/hideouts -a grille that allows poop to fall through but still…
Air grilles / ventilation grilles in different sizes x y z 119,90 79,94 7,47 mm 119,95 79,97 6,00 mm 120,00 79,92 6,92 mm 120,00 79,97 8,21 mm 120,00 79,97 9,24 mm 120,00 80,00 6,00 mm 120,00 80,00 6,68 mm 120,00 80,00 7,55 mm 120,00…
I made a simple snorkel grill with a logo for my car (suzuki jimny). Stick the logo with glue. Maybe someone will like it ;)
Warning None. Definition None. Printing Is required the same printer size than 3D SETS has defined. Use the same setting than 3D SETS Middle Grille for the modified Middle Grille. Change color for the logo border at 9.80mm for the Middle…
Air grille / Rejilla aire 130x130 mm
This is a cover/grille for a pipe (diameter 125 mm). In my case it's responsible to get fresh air for my fireplace inside the house. To prevend having animals and dirt inside the pipe, I created this cover.
I wanted to make a cool-looking grille cover for my kitchen vent. The vent had an internal diameter of 100mm, and for now this is the only diameter that I've designed the grille for (the pattern is made in a way that makes it hard to make…
Radiator grille for Renault megan 2, suitable for car. It fit perfectly on the car. It was made from abs-CF from esun with bambulab P2S, so there were no problem with printing.
Druckeinstellungen : variable Schichthöhe Stützen nur auf dem Druckbett massive Schichten Decke: 5
Honeycomb grille for Latin America Renault Clio , years 2013 to 2016 ( Clio Mio ). The file can be split into parts to fit your printer bed (in my case, I split it into 6 parts and made 3 on a Creality Ender 3 and 3 on a Longer LK4PRO.…
The file is multicolor without MMU. I printed it in PETG Prusament Galaxy Black.
This model is compatible with the lego system.
Mountain grille ornament with Toyota TRD style coloring. Ended up designing this after the shipment from China got lost in transit. \_(ツ)_/ Parts 2 x M4 4cm rods (I cut the heads off of two screws) 2 x M4 washers 4 x M4 lock nuts (regular…
A blank grille emblem, made to fit a 2004 Toyota Corolla. It may fit similar models like 2002. There are optional zip tie holes for retention. It's WEAK! Print in a ductile material like PLA+ or PETG or ABS (plain PLA will break…
You can scale the model, to adapt to your needs sizes Dont forget to like it <3 --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a commercial license to sell physical 3D prints of the model Click…
The model can be printed in 4 parts and bolted together using the groves in the back of the parts. there are parts for doing so. The long rails have inserts for nuts. If you have larger printer, you can print it in two parts probably. the…
Ventilation grille in the dining room
Description Replacement grille letters designed for most 2016–2023 Toyota Tacoma TRD Pro–style grilles. These letters were modeled as a functional replacement for the OEM grille lettering. To make them easier to print, I left out the…
This is a remix of 0110-M-P's excellent Raspberry Pi case. All the legwork was done by them - I happened to want a simpler looking design and needed to play with designing grilles that could be 3D printed. See 0110-M-P's thing here for a…
Grid air inlet window I wanted to create an air inlet limiting the incoming sounds. For this, I created a wave system, which has the role of breaking the incoming sound, due to the rebounds of the sound waves, while letting the air pass.…
After scouring the web i couldnt find a mount specific to my needs so I ran off to design it on my own, Designed 100% in Tinkercad by me. Printed in PLA+ and ZERO supports needed This mount will allow you to mount a Microprobe on the…
Print the box. Grill a sandwich. Place sandwich in box. Keep your sandwich safe.
This model is compatible with the lego system.
Description This is a 120mm fan cover, mostly common in computers. Like the million others out there, it protects the fans from foreign objects and your fingers from its blades. This design tho, also allows to swap grille colors and…
Print with the front of the tooth down on the plate. I just printed these in PLA and they have held up great.
I printed it in PETG in 2 pieces split vertically through the middle and glued both halfs together. A screw can be added for additional stability. You are not allowed to sell, reupload, modify, remix this file. (only for personal use)
Model comes in two variations: Standard: Which expects the fans to sit partially within the cupboard/wall. For large rectangular cuts. Deep: Which allows the entire depth of the fan to be housed. For flush mounting where you only intend…
Hexagonal open grille layout designed and optimized for FDM 3D printing. As shown in the photos this mod has little to no audible effect on the frequency response of the headphone and is purely for aesthetic use. Shout out to Dakota for…
My grille emblem broke off a few months ago I wanted to design a new one, not just to replace the broken part but also because I think it would be great to be able to customize in the future. I just put the basic part on there one color…
Fits both 900OG and 900NG model. Several ways to achieve proper colour combos: dual color print - black and silver print in black, paint the front silver print in silver, paint the entire emblem black, sand down paint on the front
Fallout themed fan cover, 3 pieces glued together for easy print, frame, door and number plates for the most popular vaults, 13, 33, 76, 101, 111. Paint it or print in different colors, use markers for numbers, paint chipping, rust…
Air grille / Ventilation Grille x y z 100 80 10 mm Additional notes If you like this design, please give me a like and post makes.
Simple ventilation cover. OpenSCAD model included so you can adjust dimensions to your needs. Recommended print settings Resolution: 0.2 Supports: No OpenSCAD OpenSCAD file requires BOSL library ( https://github.com/revarbat/BOSL ) to…
Lüftungsgitter Ausschnitt 177 x 96 mm Aussenabmessung 191 x 110 mm Print Settings Rafts: No Supports: No **Resolution:** 0,25 Infill: 25 % **Filament:** xxx PLA Category: 3D Printing
Its quite easy to make, letters might need a bit of a sanding, cause its a snug fit, or scale them a little bit down, with touch of glue, they will hold ( i didnt glue mine, they fit perfectly) , Use wood screws and few big enough washers…
Alternative replacement Grille for the USA Trains SD40-2 locomotive. These are the welded wire cage style with the 2 most common mesh "inserts". SLA Print. Print Settings Printer: Elegoo Mars Rafts: No Supports: Yes Resolution: 0.05…
This is the improved design of my vent that I originally designed for 3D printer enclosures. It has an optional grille on the outside and inside. By printing the vent with grilles on both sides, you can put a filter into it. The vent uses…
Lüftungsgitter mit den Maßen 180 x 130 mm und 1,5 mm Dicke Ventilation grille with dimensions 180 x 130mm and 1,5mm thickness.
Ventilation grille used for ventilation of boat lockers
Modeled this after an OEM Toyota badge for a 1987 Toyota 4Runner. I used threaded inserts with M5 bolts in the factory location to mount this to my grille.
This model is compatible with the lego system.