5646 modeli
IMPORTANT: This is just a model shell grip for a VR controller. NOTE: This is for the Oculus Quest 2/3 controllers. If you are looking for the Quest 1 version, see here . NOTE2: This will fit a Quest 3 controller, but it may be slightly…
Wydruk około 0,98 €–1,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
When I discovered snacking tongs on printables, I really liked the idea and immediatly downloaded and printed one. They served their purpose, but they just felt wrong between my fingers. They were too bulky, heavy and they used a lot of…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello to all gun-guys and trigger happy people! I made an foregrip for my AR-15 in an extremly light, slim and tiny version, just to fit on your gun with M-Lok rail. I recommend to print with support and an infill of min. 50%. Like this,…
Wydruk około 1,18 €–1,45 € nettoWstępna wycena jednego wariantu
Second third and fourth picture are to show the difference between the original and the 3-D printed one original one is on the left and 3-D printed one is on the right To see the to see the original thing from Nintendo…
Wydruk około 5,59 €–6,83 € nettoWstępna wycena jednego wariantu
Replacement grips for a Beretta M9/92FS Spacer is not required, but may be useful if grip bolts are longer than normal due to original handle thickness.
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Hi, I always wanted an affordable, uncluttered and reliable mechanical pencil that I can always carry with me. This is the 3d printed solution I came up with. It's a simple mechanism, allowing you to adjust the length of the leads using…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
Hello, this is an early version of a compliant gripper which allows you to hold small objects that you can't reach using only your hands. So far I made four versions: Small rings (Ø20 & Ø14 mm): Short version - its dimensions are approx.…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
It's a medium sized clothespin, but as a single minimalistic part and print-in-place. It uses ‘snake-bite' style teeth to hold material together because it doesn't have any extra force pushing the clamp closed. The force is a little less…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The wires (or component, such as a switch or LED) are held by the flexible fingers so that you have two hands to hold the soldering iron and solder. The springs added to the original design provide greater flex in the fingers and a wider…
Wydruk około 1,20 €–1,46 € nettoWstępna wycena jednego wariantu
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 2,64 €–3,23 € nettoWstępna wycena jednego wariantu
Hi, this is a tiny but functional bistable compliant robot gripper. It's some kind of simplified version of my other Keychain Gripper . It's great for fidgeting or tinkering around with bistable mechanisms. In its initial position the…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
Credits to manabun on Thingiverse for the great original design! Original: https://www.thingiverse.com/thing:2769344 I modded the design to be printable in a better position without support. The slot is slightly modified for an easier fit…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello, this is a fully functioning soft robotic gripper. You can use it on its own or print the exoskeleton around it. You can use the exoskeleton to mount it to a robot. It has the dimensions of approx. 200 mm in diameter and 17 mm in…
Wydruk około 0,64 €–0,79 € nettoWstępna wycena jednego wariantu
SCALE THE STL TO 98%, trust me This simple grip for your controller is simple and long-lasting, it takes a few minutes to make, it is a great ally if your thumbsticks are damaged or very old Print: Basic PLA 0.2mm resolution (lower for…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
Pokusil jsem se vytisknout 3 různě silná trsátka s oboustranným gripem. Nejtenčí má pouze jednostranný grip. Print instructions Tištěno z PETG, teplota první vrstvy 260°C, teplota bedu 60°C. První vrstva 0,3mm, střed 0,15mm, poslední…
Wydruk około 0,05 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made the 3D model from scratch but got the idea from Kindle paperwhite 4 grip. PLA. Took about an hour to make. Fits the kindle paperwhite 11th generation. 74.2 x 124.6 x 8.1 mm Slight issues with model that do not effect the print or…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Making Reximex RP (MITO) light. Intended to be used in ISSF 10 m air pistol competition. With removed shroud (and replaced by 3d printed front sight) down to 733g. I have used PrusaSlicer split tool with dovetail option to separate the…
Wydruk około 7,24 €–8,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A spikes for better grip that helps a landroid going uphill or in a sharp corner
Wydruk około 1,50 €–1,84 € nettoWstępna wycena jednego wariantu
Features… Aerated handle with grip bumps for comfort, lightness, ease of handling and no-slip. Subtle, yet effective 3° bend at end of sticks for a solid grip on those snacks. Teeth at the very tip perfectly come together for picking up…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
Hi, this is a prototype of a bistable compliant robot gripper. Each side can be actuated individually by sliding the actuator in the centre. It is still in an early stage and will change in future versions. Its dimensions are approx: 42 x…
Wydruk około 0,64 €–0,79 € nettoWstępna wycena jednego wariantu
When using the original tools, I was bothered by the heating block's great freedom of movement and the tool's poor grip on the fan screws. After damaging the thermistor, I wanted to remedy the situation. I added material above and below…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a variation on previous model Filament Quick Clamp : https://www.printables.com/model/506814-filament-quick-clamp A rubber band powered filament clamp-on to prevent the spool from unraveling This new model is different in the…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
Project A comfortable compact grip for carrying reusable (or one-use) grocery bags. Grip easily fits in pockets or can reside on one handle while the other slips in and out of the grip when needed. Printing Prints vertical on either end…
Wydruk około 1,89 €–2,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Why I wanted a softer grip for the thumbwheel, so I split the model in two: a core and a grip. These can be printed seperately in different materials. I chose TPU for the grip, and PETG for the core. Printing & Assembly The print settings…
Wydruk około 0,92 €–1,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
hi, für jeden der mal Bock einen Farbwechsel der Drehgriffe hat :)! Happy printing :) print settings: PLA/PETG 3 perimeters Thanks for any feedback!
Wydruk około 1,84 €–2,24 € nettoWstępna wycena jednego wariantu
As the title says, a grip for the Daewoo DR-100/200/300. Print as shown, with supports. Intended to capture a 1/4" nut (hardware-store will do). A 6mm will work almost as well. Print instructions Category: Sport & Outdoors Summary As the…
Wydruk około 4,71 €–5,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This PSP grip is similar to others but has a different style of clip. The clip attaches to the top of the psp using the “accessory screw holes” on each side of the USB port. The bottom holds the psp with a tension clip. (See photos) In…
Wydruk około 9,49 €–11,59 € nettoWstępna wycena jednego wariantu
Made myself a tweezer that is compact, strong and precise. Printed in PLA, 25% infill, 4 perimeters. FreeCAD modeling.
Wydruk około 0,93 €–1,13 € nettoWstępna wycena jednego wariantu
English (Deutsche Beschreibung siehe unten) I offer the hex-bit-storage in several variations : This version offers room for 8 x 3 bits and for the Wera Rapidaptor (If you have no use for the Rapidaptor, see the other variations below)…
Wydruk około 8,48 €–10,36 € nettoWstępna wycena jednego wariantu
*** Please compare your SmallRig Cage for Sony Alpha 6000 with the one in the images, there are different versions! *** I used ‘Fuzzy Skin’-Modifier in PrusaSlicer to achive a more grip surface texture. If you wanna add your own modifiers…
Wydruk około 1,05 €–1,29 € nettoWstępna wycena jednego wariantu
Dieser Griff ermöglicht es, das Kindle Paperwhite 12th Generation (2024) besser zu halten. Er wird einfach angeklipst und die Position kann individuell festgelegt werden. Da sich der Knopf in der Mitte befindet, ist er sowohl für die…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Camera holder for an action camera. Different ways of holding. One camera, camera with the display, two cameras. Floating. Print instructions Accessories: Hot Shoe Adaptor With Tripod Mount STL:…
Wydruk około 13,96 €–17,06 € nettoWstępna wycena jednego wariantu
With a pair of velcro strips at the bottom and an optional strap, StopGrip 's mission is to prevent boxes, buckets and groceries from sloshing around the boot of your car. BOM Velcro strip 2 × 20mm × 100mm Gorilla glue or similar to…
Wydruk około 8,38 €–10,25 € nettoWstępna wycena jednego wariantu
Push-ups / Handstand gripper
Wydruk około 9,15 €–11,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
grips for the nintendoswitch procontroller, 3D scanned and smoothend
Wydruk około 1,74 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
We have a Leifheit telescope handle (Nr 41523, 135 - 400 cm) that we use to clean high windows. Also it can be useful for positioning something high up. For that I already created a universal hook…
Wydruk około 2,76 €–3,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A grip for the Minolta x-700. The pictures show the grip with additional leather to increase grip.
Wydruk około 1,61 €–1,97 € nettoWstępna wycena jednego wariantu
Dieser Griff ermöglicht es, das Kindle Paperwhite 12th Generation (2024) besser zu halten. Er wird einfach angeklipst und die Position kann individuell festgelegt werden. Da sich der Knopf in der Mitte befindet, ist er sowohl für die…
Wydruk około 1,51 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A grip for the Fujifilm X-E4 that provides access to the battery and SD card without removing the grip. You can use a standard ¼-20 camera accessory screw to attach it via the tripod mount screw. Thanks to the maker of the original model…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu
I wasn't quite satisfied with the original version of this clip, when I downloaded and tested it a few years ago. One of them broke, and I found the filament to not be held tight enough. Yet it seemed to have much more potential than all…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Modeled with a real Xbox controller scan. Provide a much more comfortable grip on tablets while gaming. I made it specifically for playing Real Racing. The internal depth is 7.5 mm, and the ridges are 0.3mm tall. This fits my tablet with…
Wydruk około 14,00 €–17,12 € nettoWstępna wycena jednego wariantu
Wanted to use this vice grip on my IKEA Lisabo Table but I needed something to flatten the chamfered edge of the table for it to work. Used a countersunk wood screw to hold it onto the table.
Wydruk około 2,43 €–2,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A demonstration model showing 3 different ways you can make your prints grippy - knurling, fuzzy skin, and contours. The model includes a 2nd part which you can use to define the area for the fuzzy skin. Download, print, and experiment…
Wydruk około 3,97 €–4,85 € nettoWstępna wycena jednego wariantu
Gridfinity bin for Knipex TwinGrip 82 02 200
Wydruk około 2,87 €–3,51 € nettoWstępna wycena jednego wariantu
This is a slim grip extension for a Sony a6600 camera. It holds a single AirTag under the battery compartment. The AirTag on the non-door model is held-in by gravity and there is no clip or cover holding it in. The hinged door model has a…
Wydruk około 1,10 €–1,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Vertikální grip na zabraň M16 od značky SPECNA ARMS konkrétně modelu SA-A90. Grip je dělán pouze na předpažbí tohoto modelu, tudíž nezaručím že bude pasovat na jiné zbraně a jiná M-lock předpažbí. Grip je velice solidní drží krásně na…
Wydruk około 2,26 €–2,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The connection features a tapered shape to establish a strong force-locking bond with the pipe. The beginning has a diameter of ⌀26 cm, gradually tapering down to a diameter of ⌀25.5 cm at the end. This design facilitates a secure and…
Wydruk około 2,39 €–2,92 € nettoWstępna wycena jednego wariantu
A grip / handle for the Mechanical C ring from Lautie. It provides a better grip when you're tired of wearing it on your finger. It also enables new fidget play styles if you set the ring to free floating, you can use it as a desk spinner…
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
Here's a link to the brushes: https://www.amazon.com/dp/B073R3D1C9 I use them to clean PCBs and plastic housings.
Wydruk około 1,81 €–2,21 € nettoWstępna wycena jednego wariantu
Scangrip Halter für Manfrotto Leuchtenstativ - Hält Nova R bis Nova SPS 6 Wird lose aufgesteckt. Die Leuchte wird eingehängt und kann gut verstellt werden. Nova R hält am besten, da der Bügel gummiert ist. Fotos zeigen Nova R und Nova SPS…
Wydruk około 2,89 €–3,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Layer height 0.2 mm Infill 20% Noozle 0.4 mm
Wydruk około 1,43 €–1,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print with logo facing up and support for key and chip recess
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
Enhance the versatility of your Portable Zyliss All-Purpose Vise with these 3D printable rotating grippers! Designed to hold pipes, dowels, and circular objects securely, as well as position square pieces of wood diagonally, these jaws…
Wydruk około 3,78 €–4,61 € nettoWstępna wycena jednego wariantu
Create a variaty of router templates for a grip in a box. See examples. With a little help of our modern chat friend, I've created this parametric router template.
Wydruk około 1,18 €–1,44 € nettoWstępna wycena jednego wariantu
UPDATE: 07/03/23 I have gone ahead and added a version with looser tolerances for those who were having issues printing the original model. The original model had clearances of 0.3mm minimum and I have loosened them up to 0.45mm minimum.…
In order to find the perfect fit for your setup, just print a bunch of these with different scaling in Y/X-direction (+/- 10 %). MicroMax Standard The card is recessed by 6 mm and will fit every typical card slot. I tested these with my…
Thank you for downloading and liking the model! Your support means the model reached the 400 downloads in one month milestone ! 🏆 As a thank you, Version 2.1 adds a prop silencer attachment. New prop of the SCCY CPX-2 9mm handgun. This is…
Hello there, Full credit to user Rusty__Shackleford for this great model "Angled fore grip mlok AFG M-LOK" I just remixed it by cutting side mount which didn't really worked for me, also took me too much time thinking about good angle for…
This model is the old version. The new model with improved printability and enhanced accuracy is here! https://makerworld.com/en/models/570404 If you wish to sell prints from Manabun Lab, please refer to this.…
🔥 UPDATE: V2 NOW AVAILABLE! An improved version (V2) featuring new side-grip grooves for better control is now out! 👉 Get the new V2 version here: This is a bed scraper / print removal tool designed to safely and efficiently remove prints…
This case is designed to fit the Miyoo Mini PLUS handheld. It works as a protective case, with a secure latch and a simple hinge mechanism. When used as a grip, the Miyoo PLUS slots into place securely and is held in place by the ridges…
The gripper beaks can take the shape of the object they hold, like in this case an orange! Printing it is pretty self explanatory, or watch the short: https://youtube.com/shorts/1ziQGQiweF8?feature=share edit: Just to clarify this is not…
A Nintendo Joycon grip with front-looking windows for the LEDs. It prints without supports and the LED windows face forward, so you can see them right as you normally hold the joycon. The LEDs shine into a slit that arrives to a 45º…
Angled Vertical Foregrip (M-Lok) I was looking for foregrips on thingiverse but couldn't really find one that I liked so I decided to make one myself. I found this grip made by Strike Industries and I really liked the look of it so I…
Print upright on bed for best strength and accuracy, put the arrow marker at the top. I added a single support for the bottom tab that sticks out, and a brim for good adhesion. Otherwise, standard PLA works well for snapping onto a…
Intro A super-mini tool designed to hold standard hex bits with exceptional grip and control. Its compact size makes it perfect for tight spaces, keychains, or everyday carry in your toolbox — yet it still offers a confident, textured…
I made the grip for the Lite by rescaling my grip for the regular Switch based on published size data. I don't own a Lite but Bacon26 and Dumpe (thank you) tested it and I corrected the size accordingly. The current size would be very…
I modeled the Punisher Skull and added it to the Short 2 IPT file in this source. https://www.thingiverse.com/thing:580466 I found this one https://www.thingiverse.com/thing:2742432 on here, But my slicer didn't like it so I made one. I…
For older comments, remixes , etc. see the Thingiverse page where I originally posted this model. Otherwise all files are posted exclusively here on Printables. PRINTING I printed the main left/right sides and the top face down with…
DE: Ich habe die Wünsche der Community umgesetzt und das Durchgangsloch für die Schraube enger gemacht. Der Sterngriff lässt sich mit einer Schraube oder mit einer Mutter kombinieren. Zu der benötigten Länge der Schraube muss 10 mm…
A better JoyCon Grip than the original due to more ergonomic Design. This is a remix from death4u's Xbox JoyCon Grip, which is itself a remix of JoyXBoxCon - Joycon Xbox Style Grip by Max_Luck (https://www.thingiverse.com/thing:4230868)…
Like the original model, it's printable without generated supports, though you can choose to enable supports to avoid sagging bridges. I printed with a brim, but the brim may not be necessary if you have good bed adhesion. After printing,…
Star knob for hex screws DIN931 and DIN933 in M3, M4, M5, M6, M8, M10 and M12 The knobs have a perfectly fitting hexagon for the screws. This ensures a form-fitting power transmission when tightening and loosening. In addition, there is a…
The Grippy Broom Holder is an upgraded version of the original Broom Holder, designed to provide even more holding force. It features four TPU ribbed grip inserts that are glued to the inside of the holder, creating extra friction to keep…
Print in the orientation of the STL files with support. The support contact face is nearly non-functional and you will not touch it, therefore even some roughness at that surface doesn't matter. Be aware: OLED version is 3mm wider than…
I remixed the Wushu grip from Maverick0197 to have the Die Free Kung Fu Grip texture. https://odysee.com/@Maverick0197:1/WushuGrip:6 https://diefree.com/kung-fu-grip/ Below are my recommended print settings: Resolution: 0.1-0.2mm Infill:…
Version of the Shade Vertical Foregrip with a monolithic body. Functionality, design and usage are identical to the original design just without seperate side panels so it prints in only two pieces. Print Settings Printer Brand: Creality…
Meet the VICEGRIPTOR! The strongest 3D printable clip at it's size. Zero assembly, zero supports, just functional design. You never would have thought you needed this, but now you do. The VICEGRIPTOR is a clever, print-in-place gadget…
You know what to do with this, no support is needed. will need screws and nuts.
6 different sized airsoft grip. Use 5x30 mm hexbolt. Printed with 0,6 mm nozzle. 3-4 walls. 0,24 layer height. 20% infill. Printed in PLA + 870 3DLAC. Very strong. You can also use fussy skin to give it some grip. I used 0.3mm fuzzy skin…
Due to how small the starter set launchers are I made this Grip it fits tightly with a satisfying click Printed on a Elegoo Neptune 2s with Sunlu PLA+ .3mm Layer Height 10% Infill Normal supports everywhere
This Butterfly Knife, aka Balisong, has grips on both sides for those who know their way around Butterfly Knives and Balisongs. I couldn't say it any better, so here's a quote: “This thing is wicked fun! It's not going to carve a…
This is a Nintendo Switch 2 Joy-Con Grip. It works better with magnets, but is also fine without. 4 magnets (8x3mm) can be pressed into the sides. Best to print standing up. Supports do help with the bridge up top, but are not strictly…
Foxbat is GIANT handcannon Nerf pistol, which uses Talon or Angled Talon half-dart magazines, loaded through the grip! Blaster Overview: Firing Demo: READ THE "Print Info" SECTION of this description page before printing the blaster!…
I made this Grip for comfort when you use mouse function with your Joy-Con 2. Tested it works.
An ergonomic angled foregrip.
This is a fully functional bistable compliant robot gripper for your keychain. In its initial position the gripper is closed, when you push the switch in the middle upwards it snaps into its new position. This opens the gripper. The…
Customize your own JoyCon grips. Two Animal Crossing designs and STEP file included. Note: Please ensure your extruder is properly calibrated. The first time using this will be snug , but will loosen up just enough after a couple of uses…
The model is to be printed in 4 parts: 3 claws and the grip, and then assembled and glued. Consider the horizontal expansion setting in your printer to make the parts fit. Dimensions are 21 cm long and 6,5 cm wide. To legally sell PRINTED…
"As a 3d printing nerd, one doesn't buy plastic things one can design and make" The only plastic I buy now comes on spools. So I hit up Fusion 360 and made this little guy. THE NEED++++ Was getting hangups on my magazine changes on the…
The famous weapon used by the SAS in the Iranian embassy hostage crisis in the 1980s. The MP5 can fire 9mm parabellum rounds in single shot, three-round bursts, or full automatic at 800 rounds per minute. Now your Dummy 13 can have one of…
PPW Mk1 Self-Adjusting Gripper Plywood/Panel Carrier Clamp Effortless Panel Transport: Experience unmatched convenience with the PPW Mk1 Gripper Clamp, designed to streamline your workflow and make panel carrying a breeze. Its innovative…
The Shade Foregrip is a vertical foregrip designed for Nerf and Airsoft. This grip can be attached to Picatinny-Rails aswell as Nerf-Rails without any modification or adapter. Notches in the top allow the grip to be locked in different…
Intro This is an ergoniomic bit tool with a nice textured handle and rotating end piece ! Try it, you will really enjoy working with it! Why you'll love it? Suitable for all HEX bits Very small but still a super grip for all your work…
Inspired by custom gun grips, my new Bic Lighter Sleeve has an awesome tactile hand feel, gives a satisfying POP when you remove the Bic, and I think it looks bad ass! Check out Dragon Scales 2.0 👇 There's a fin inside to keep a good grip…
The Saab JAS 39 Gripen ("The Griffin") is a multirole jet aircraft in service with the Swedish Airforce since 1996. It is also used by the airforces of Brazil, Czechia, Hungary, South Africa and Thailand. This model is based on Kaboldy 's…
Needed some guitar picks, printed them with some grip.
CZ 75 Shadow 2 grips in 2 thicknesses: 6.6mm and 7mm Tested - grips made from PLA are used for 2 years and are fine. Unfortunadely no photos on the pistol. (But there are some in “makes”) Print with supports with textured side up. If You…
BETA TESTING Complete 12/4/2025 This grip feels fantastic! The AYN Thor Grip is engineered to transform the Thor’s handheld form into a true console-grade feel. The sculpted design fills the empty space between the screen and the body…
This is a custom grip for the R36S to make long play sessions more comfortable. I made it because I saw this video by HyperPlay RPG where they showcase a custom grip: After asking if I could print it myself, I didn't get a reply so I did…
