Liczymy pasujące modele…
[EN] If you have a tiny drill that can not fit in a standard drill chuck this device can help. It can adjust to the drill diameter and keeps the drill centered. I added two different sizes for small drills. CAD file included. [DE]…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A pin vice, I wanted too be able to keep a couple of these around with known drill sizes in for deburring holes or reaming out dowel holes in 3d prints. I've seen one or two models about but they seem sized only for 1/8" shank pcb drill,…
Wydruk około 2,00 €–2,45 € nettoWstępna wycena jednego wariantu
This is a display piece for your personal collection. I recommend printing at a fine layer height of at least 0.1-0,12. You will need to resize the model 200-250% for better details. Feel free to ask any questions!
Wydruk około 1,56 €–1,91 € nettoWstępna wycena jednego wariantu
As with many of us i have hobbies that require me to be able to hold a work piece at many different angles to be able to create the effect that i want. There are not many tools for holding work that will allow more than one direction of…
Wydruk około 6,11 €–7,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
As the GOATA Chucks are way to expensive for me, I decided to 3D print them. The dimensions are: 10cm by 10cm by 3cm. There are two variants: Normal and Grippy one, the normal one has a flat surface whereas the grippy one has small dots…
Wydruk około 2,55 €–3,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mount to stabilize the galvo-style LaserPecker 1 on a drill press Jacob's chuck. Easier to manage focal distance and avoid bumping the lightweight tripod it ships with. Optional “flex pad” model can be printed in TPU or another material…
Wydruk około 2,12 €–2,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Nunchuck Wii adapter for CNC motor driving housing In order to pilot the 2 stepper motors of my OPENSCAN scanner, i use a wii nunchuck connected to the CNC shield of the arduino remix of https://www.thingiverse.com/thing:951963
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
A 2.5inch (63mm) diameter three-jaw chuck. The three self-centering jaws are reversible to allow holding larger work pieces. To fit them in the normal orientation, as shown in the photos, insert them in to the slots in the order A-B-C. To…
Most of the simple push drill models ( mine included ) have the annoying feature that the drill bit reverses every time you pull the sliding nut back up to the top. This version solves that problem by encapsulating the sliding nut in a…
A stylish fidget spinner designed for performing tricks by spinning it around your fingers—an engaging way to entertain even your most imaginative companion! Simply print a chain to your desired length, attach the Ring and End pieces, and…
3 Jaw Chuck modified for the Desk Clamp Version of my Nano Vise V2 https://www.printables.com/model/155120-nano-vise-v2-by-prima (get the desk clamp parts from this link above) easily swap between Vise or Chuck for your work! suitable to…
I made this to fit the air chucks at the metal shop I worked at. Pete's remix might be better suited to normal air chucks. https://www.printables.com/model/1532145-air-chuck-rocket-14 If anyone is looking for an easy remix project, Dante…
Źródło oznaczyło ten model jako treść 18+.
Inspired by Speedy777's Pump Drill ( http://www.thingiverse.com/thing:731086 , which was inspired by Performance 3D's drill), this slightly beefier version features an adjustable chuck that can handle bits from 5mm (3/16") down to 1.5mm…
This latest version of my push drill uses a collet chuck (rather than a 3-jaw chuck) for increased gripping force. The set of collets provided will handle diameters from 0.25" (6.35mm) down to 0.044" (1.1mm), as well as standard ¼" hex…
test 3 jaw chuck this model possibly needed a bit of lime/file(ajustement) Category: Machine Tools
This style of adjustable drill chuck (similar to the Dremel chuck) is much simpler than the Jacob's style chuck but it does have one quirk: the jaws move with the tightening ring instead of with the body, and hence, the torque seen by the…
Originally made for cheap tiny lathes like those sold on Amazon ( like so ). Remixed from mdkendall's excellent design that provided the basis for this smaller version. Thanks mdkendall! This version mini-fies the design to: work within…
this is a pair of nunchucks i made about 7 months before i posted this but has some over hang but with the well tested printer it will be fine if you dont want over hang you can find a newer version on my profile
Introducing our Desktop Lathe Chuck Extension – a versatile tool designed to work seamlessly with your desktop vice's C-clamp, elevating its capabilities for precision work. This innovative extension offers a secure and stable solution…
Motivation The xTool RA2 rotary is a great accessory, but it can be challenging to square the workpiece up to the RA2 rotation axis. Solution Design and print a fence to achieve the following objectives: Allow workpiece to be held square…
A Medieval Chucky. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
Motivation The xTool RA2 rotary is a great accessory, but the included chuck jaws have a few shortcomings: Workpieces with shallow stepped inside geometry (lip) are difficult to get a good and even grip especially when tapered Outside…
This is a remix to use 9 mm garden hose with this spent primer catch. These hoses have a 15 mm outside diameter which fit snug into the device. It is necessary to shave off a bit inside the hose to prevent that spent primers get stuck…
After trying out several drill chuck designs (my own included), I've concluded that 3D printed chucks with moving jaws just don't have enough gripping force for common tasks. These collets (similar to ER11 collets), however, can grab onto…
i was bored so i designed this
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint LeChuck is a fictional character in the Monkey Island series of graphic adventure games.…
This is a remix of mdkendalls successful “2,5” Three Jaw Chuck" for mounting on a Revopoint dual-axis turntable. The chuck can be mounted on the turntable with M6x8 countersunk screws or with the screws developed by Whitehawk2000 . From…
Print & acrylic draw!
This chuck is based on an old patent drawing for a Jacobs chuck. The chuck can hold bits up to 1/4 inch. When assembling the chuck, the jaws must be inserted in the correct order. The parts have dot symbols on them to help you assemble…
This is a 3d printable self centering lathe chuck. It is a great tool for your everyday machinist, or simply as a decoration for those fond of lathes and how they work. This model is great to help you understand how a self centering lathe…
Once a brilliant maestro, now a train conductor, Chuck traded the symphonies of the concert halls for the cacophonies of the Ghost Station, all in the hope of discovering the next big thing in music!
This model may be difficult to print depending on your printer but if you use stock nozzle or smaller and precision layer height you should be fine. No infill necessary. This is my first attempt at an articulated design so if you have any…
## Design Concept The palm nunchucks are designed for stress relief and casual fidgeting. The compact size allows for easy handling and is suitable for quick routines while multitasking or relaxing. ## Uses This fidget toy is perfect for…
The chuck stop was made for my Hare & Forbes AL-320G / L141 metal lathe (Model available within Australia) to locate shorter parts beyond the chuck jaws to provide clearance for facing operations. It has been designed for the standard…
I came across a "straight one-way manual hand drill" by "zhwang168" "https://www.thingiverse.com/thing:4740760". I really liked his design so I followed his tutorial and made a bit wider and longer version with space for a 608RS ball…
Wind filament in no time with an electric drill and this adapter. I found the original spool unwieldy to print, I also changed the interface to a 1/2" hex pattern. Print a spool and two spool_caps.
I designed a simple 3D-printed mount that allows me to store my wood lathe chucks on the wall or any other vertical surface. I mounted mine on the wall of my wooden lathe stand. The mount is designed for 1″ 8TPI thread, but if you like…
Scary Halloween Decor - Chucky, It, Saw
made for a genera purpose multi function tool to hold whatever part you need it to.
The design is based on the Longworth Chuck, it's a great movement and normally used for Woodturning. The chuck's original designer sadly died after showing the design at a club meeting. The late Mr. Longworth of the Hunter Valley…
About Any owner of the RCBS Rockchucker IV knows it's a great reloading press for making high precision ammo, but the primer catch is horrible. This improved primer catch is optimized to catch every primer and leave extra room where you…
Scan of the screen used original head
One of the biggest headaches in laser engraving tumblers using a chuck rotary is getting the cup on the chuck precisely lined up. “Frustrating” is just the beginning. Expensive if you mess up either by being off center or you clamp too…
Air Chuck Rocket modified to fit my 1/4 air chucks
Gridfinity bin for Dremel It has a 1x2 bin footprint. Used for Dremel spanner, chucks and standard 3.15mm (1/8") tools. I really needed a bin with both spanner and tools, and figured I'm not alone. There's no lip on the bin since You…
I printed in PLA with 100% infill so I can tighten the chuck really well.
This is a drill chuck which you can use to clamp drills, screwdriver bits, wires… basically whatever you want to clamp and fits in there :) I made this because after all my silly projects I also wanted to make something usefull. I think…
Inspired by Chris Borge's Ball Vise system. I use this scroll chuck to hold onto larger miniatures in the ball vise. see my D-Series Mounts ( https://www.printables.com/model/992148-d-series-mounts ) for a way to fit this into a D-Series…
Printed at 100% fits 1/16 scale or resize in your slicer to fit desired scale.
Nunchucks for event costumes like Halloween. For stronger chains and handles use a higher infill density. I used a 50% and my print is strong enough to smash cardboard boxes without taking damage. Model starts off large. Change sizing to…
Prints easy without supports. I honestly printed it out of PLA with a .8 nozzle and 60% infill. For the hardware to attach the faceplate, I used 4-#10-24 1 ¼" long screws and 4-#10-24 nylon nuts that are recessed into Faceplate part.…
Here's my version of Lego Ninjago Nunchucks of Lightning that's. They're scaled to fit a persons hand. On version is solid, one version has holes for batteries and leds. Be sure to post a make and check out my other models If you like my…
This chuck key holder for my Central Machinery Model 45861 9x20 Lathe is based on an original design by "Clough42" (available here : https://www.thingiverse.com/thing:4392251 ). That design was made for a different model lathe, so I…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Drill Chuck Key Tab Repair Kit I wanted to repair or replace the broken tab of an old drill of mine and designed this drill chuck key holder. It is easily printable using TPU and can be secured with a small cable tie - simply follow the…
compliance PETG mechanism to increase holding force for PET bottle caps (∅30.5mm) - for geriatric or handicapped people
adjustable chuck clamp with a grip - open and close with a turn, special conical thread geometry
Here's my version of Mikey' nunchucks from TMNT. Print out two of the handles and 3 of the chain links. files split and fit a .5 in rod. Category: Props
This wall mount holds your wood lathe chuck at angle, so there's no need for a threaded stud. Just slip the chuck on and off. There are 4 mounting holes for #8 wood screws. You will need to open the chuck to clear the stud. The wall mount…
Das sind zwei Bohrfutter für Bohrer von 1mm bis 7mmm und 1mm bis 10mm, mit dem von Hand löcher in 3D-Druckteilen nachgearbeitet werden können. Die Durchmesser der Bohrfutter beträgt 29mm und 40mm. BF - Bohrfutter groß BFk - Bohrfutter…
Shortened the bo staff posted by soozafone to 23 mm, added a 2mm hole that is 4mm deep. Could potentially use any material to link up the nunchuck handles. I used a 1.6mm diameter soldering wire and a dab of crazy glue. Pic of yellow…
This is a model of nun chucks. The chain is pretty strong but will break with a lot of stress. Supports: On
The chuck assembly itself is a modified version of the chuck by Daniel Barker https://grabcad.com/library/mini-drill-chuck-1 A.K.A the brass chuck that everyone says you should buy when making this kind of drill (im cheap) I modified it…
Attempt to make a chuck for my laser new engraver. UPDATE: Version 2 is out now Remix from models on Thingiverse see credits. Bill of Materials (BOM): CHUCK 1 - Nema 17 Stepper Motor Bipolar 4-Lead 4 - M3x8 bolts and M3 washers. 1 -…
UPDATES! See below. This chuck was not designed for and should not be used on a high-speed lathe! Most conventional wood lathes do not turn slowly enough to use this chuck. Do not attempt to turn this chuck faster than 5 rpm! There is a…
A fully 3d printed chuck style model painting handle that doesn't require any purchased hardware like my last model. The 3mf file contains all the parts oriented properly for printing as well as supports and support blockers for easy…
Overview "Hi, I'm Chucky, and I'm your friend till the end…Wanna play??" The classic Good Guys doll brought to life through your printer. This figure stands about 100mm tall and is split up into parts to accommodate a 4 color multicolor…
PLA works just fine. PETG is a recommended material given loads and being stuffed in my tool bag. Suggest gyroid infill.
Easily printable on an ender 3 by a newbie like me :)
My dad needed a replacement for this wooden jig he had been using for years to shuck oysters
There are other Rock Chucker primer guides, but mine uses 5x3mm magnets. I also include the F360 file so you can tune and adjust this as necessary. Since different Rock Chuckers have a different length slot in the ram, I provide both a…
Adapter for mounting three jaw chuck on a powerdrill. Glue is recommended, because the friction of the press fit is not strong enough against the rotation. Not for heavy uses, only for light operations such as sanding.
Chuck holder for you wall. Is suitable for M33 x 3,5 thread on your chuck. I used mine for Teknatool Sepernova and NOVA G3. Print settings: Infill: 30% or more Material PETG Botom layers: 0,3mm Thread layers: 0,15mm
I found another (supposedly) M33*3,5 Thread lathe chuck holder on Printables that whas unnecessarily big and also had a wrong thread pitch. I did however like the idea and modelled my own. I prints in around 1h40min, PLA worked fine for…
Chuck-It launchers use their own crappy sizes. This can be used to replace the Pro Launcher XL ball. The factory ball is terribly made. It NEEDS to be printed using TPU - which is animal safe. Scale to 75mm & it should fit just right. It…
Here is an adapter for mounting the very popular miniature vice “Nano Vise 2.0” as well as the “Nano Chuck” by PRima (remix of mdkendalls “2.5 Inch Three Jaw Chuck” ) on the Revopoint Dual-Axis Turntable. The holder can be attached to the…
Parametric Chuck Key Holder for Lathe For my lathe (Vevor YS-2260A) the dimensions of the backsplash are: wBackPlate = 13.8; // mm hBackPlate = 9.8; // mm If the backsplash of your lathe has different dimensions, change values in…
was too lazy to design my own handle/chuck. I liked the original design, was perfect for my 1.8mm drill bit. Remixed it.
Made with TPU. Less walls and infill makes it more squishy.
Assembly grease the grooves and hub press top disc onto bottom while rotating until the hub clip in Select Jaws and enter them in Order of markings • ↦ •• ↦ ••• If the Jaws are reversed (marking outwards) the order is reversed ••• ↦ •• ↦…
4-fach-SDS-Plus Bohrerhalterung für L-Boxx SDS-Plus Bohrerhalterung für L-Boxx Kisten z.B. Bosch. Halter so drucken, das die SDS Aufnahmen nach oben zeigen. Als Material PETG, ASA, ABS, TPU Wandstärke mindestens 5* 0,2 Struktur für mehr…
Chuck with automatic return. you need : 3 pins Ø3x20 1 pin Ø2x6 1 M6x20 chc screw din 912 Mandrin avec retour automatique il vous faut : 3 goupilles Ø3x20 1 goupille Ø2x6 1 Vis chc M6x20 din 912
Chuck Gnome-ris 🧘♂💥 So tough… he didn’t get 3D printed — he extruded himself . Meet the grumpiest, punchiest garden guardian ever to wear a gi. This fierce little fellow combines classic gnome charm with dojo discipline. Sculpted with…
I upgraded my cheap chinese CNC with end swithes following this design: https://www.thingiverse.com/thing:2796202 But standard brush motor produces so much noise, that inputs of GRBL controller board was triggered immediatelly when motor…
This is a very basic print-in-place design for a pair of nunchucks. Please feel free to remix and improve on it! Would love to see what people come up with.
A sturdy cordless drill holder for almost all cordless drills (Makita, Bosch, Einhell, DeWalt, Ryobi, Black&Decker, Worx, Scheppach and many more). This holder will take any drill chuck with 43 mm outer diameter and a maximum length of 70…
Remix of the 2.5inch Three Jaw Chuck with a hex shank, to allow use with a standard drill.
Collapsible Nunchucks! The collapsible handles thread into the chain part. The chain prints flat with the flats own, and the handles print upright with the threads up.
The Print: Ender 3 Max Neo, upgraded with Creality Direct Drive print head 0.4 mm nozzle Comgrow Grey PETG 235°C nozzle, 70°C bed temps 0.24mm layer height (I was in a rush) 2 walls, 2 top and bottom shells, 10% adaptive cubic infill…
This is a dual filament / colour Converse Chuck Taylor sneaker set for the very cute and popular Ghosties! model. Print Settings Print the sole in whatever filament you like and the top in perhaps some more colourful filament. I recommend…
its low filament and print in place
Vergrößertes Backenfutter mit Metrischer aufnahme
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a remix based on: https://www.thingiverse.com/thing:3827782 The new mounts are completely designed by myself to be compatible with the original release which looks to have been abandoned by the designer. (No replies to comments…
