389 modeli
The mounts were printed with a layer height of 0.3. in PETG. No supports are required.it is intended for 4 chisels.
Wydruk około 2,27 €–2,78 € nettoWstępna wycena jednego wariantu
I described this as"scalable" rather than “parametric” - the clear opening dimension of the model is 25.5mm x 4.4mm and it's a very easy calculation to measure the size of your chisel and scale the relevant dimension in PrusaSlicer. Link…
Wydruk około 0,65 €–0,80 € nettoWstępna wycena jednego wariantu
I wanted to made my own sharpening guide getting inspiration form the ones available on the market, several designs I found on internet and the one I built some years ago with pieces of wood and furniture rolls that wasn't so accurate I…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
The original was a little to large for my meager cheap chisels, so I have reduced the inner whole to 19mm and also increased the entance gap by a couple of mill to. My rusty chisels I will try to save after finding my kids trying to break…
Wydruk około 1,92 €–2,34 € nettoWstępna wycena jednego wariantu
When I published the 1st version of the Wood chisel sharpening guide I was already thinking about a way to adjust the guide to chisel width without 3D printing and replacing the removable spacers (in orange in the picture below) Design So…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remove stubborn 3d prints with the chisel, can be used with the pencil mallet in my profile. Sometimes even when you wait for the bed to cool , some prints still dont seem to want to let go, so I made this and the trusty pencil mallet, to…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
The chamfer tool is printed with PETG and do not need supports. To assemble the chamfer tool, use cylinder screws M3x15 (2x) and hexagon nuts M3 (2x). Adjust the tool on your chisel to get the required size of the chamfer.
Wydruk około 0,74 €–0,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Since it can be tricky to accurately hold a block plane’s blade or a chisel correctly for sharpening, this honing guide is designed to help. A chisel should start with one bevel, which is formed on the blade, usually by grinding it at a…
Wydruk około 6,21 €–7,59 € nettoWstępna wycena jednego wariantu
Die Kreisel selbst besteht aus drei gedruckten Teilen. Der Zentrierring verbindet Oberteil und Unterteil. Einfach den Ring eindrücken und schon ist alles fest verbunden. Zur Abriebsicherung der Spitze sollte ein kleiner Ziernagel in die…
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
This chisel holder is for the Wood River six piece set that I purchased from Woodcraft. I wanted it to provide easy access to the chisels. It includes a blade safety box at the tip of each unit. It also has the size of each highly visible…
Wydruk około 10,48 €–12,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a tool, that helps you sharpen a chisle with a very consistant angle. The angle can be chosen, by how far forward you put the chisle in the tool. All print files can be printed with PLA, but I advise you to print the “wheels” with…
Wydruk około 1,06 €–1,30 € nettoWstępna wycena jednego wariantu
Which collets will fit? 401E (OZ8), DIN 6388A Found in spindles/routers from Kress, AMB, Isel, Mafell, Stepcraft Each position will accept collets with or without nut attached (tested with Kress/AMB nuts) A short type 17mm-spanner will…
Wydruk około 10,13 €–12,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Jig for sharpening of chisels, plane irons and similar. Print instructions: Material: PETG (PA, PC might be a good fit too) Layer height: 0.2 (0.15 should work fine too) Baseplate: Infill: 15% - 20% Honeycomb Perimeter: 3 Top: Infill: 70%…
Wydruk około 4,62 €–5,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Fillowing on from my original File Handle and the Hex Key long axis mount, here is a remix between the two, i.e. a similar profile to the bulb shape at the back of the hex key handle ( https://www.thingiverse.com/thing:3605461 ), applied…
Wydruk około 3,97 €–4,86 € nettoWstępna wycena jednego wariantu
Wood chisels holder for Stanley Bailey chisels
Wydruk około 7,21 €–8,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This a parametric model of a Angle Setting Block for chisels and plane blades. It is important to have consistent bevels on your blades and this setup block keeps your angles correct every time. Just line up the chisel or plane blade with…
Wydruk około 1,58 €–1,94 € nettoWstępna wycena jednego wariantu
Tool to help pull a leather pricking iron out of a piece of leather. Inspired by something similar made out of leather wrapped metal by Ethan Carter (https://www.instagram.com/p/CsmaGKEJja8/). I printed mine in PLA with 25% infill to make…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena jednego wariantu
A chisel holder that can take standard 8mm chisels at 6mm, 10mm, 12mm, 18mm and 24mm (30°-angled). There is a taper at the bottom with oil reservoir (top-filled) so the tips will always be protected.
Wydruk około 9,97 €–12,18 € nettoWstępna wycena jednego wariantu
Endkappe für die Gummilippen der Führungsabdeckung von Isel CPM CNC Maschinen o.ä..
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
This transforms an SDS Max Chisel into a hand tool. I made this because I got an SDS Max bit but I do not have an SDS Max hammer drill.
Wydruk około 3,45 €–4,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE: I created a new, simpler chisel sharpening jig: https://www.printables.com/model/520488-better-chisel-sharpening-jig ORIGINAL POST: My chisel set was pretty dull when I bought them, and they needed sharpening after a couple of…
Low profile chisel and plane iron honing guide. No bearings are required. Assembly Screw both jaws all the way to the center (they should align), then attach the knob. The right side is reverse threaded, and the jaws will only go one way.…
This is a chisel sharpening jig. It accommodates chisels as small as 0.25 inch and as wide as 2.25 inch. There are 2 holding positions which I'll call the lower vise and the upper vise. Place the chisel into the vise so that its flat side…
This guide is used to get the right chisel and plane projection lengths when using an eclipse style sharpening system. Its pretty similar to the original that it's remixed from except I added a lip to use it on the edge of the bench and I…
I have created chisel holders in 3 different sizes for Kirschen chisels. These fit the different handle sizes respectively diameters of the metal ring. 17 mm for size 6 and 10 (and every other size with 16.3 mm metal ring) 18.5 mm for…
Got sick of my Freshly sharpen chisels getting knicked...so I made these. I have ¾", ½", and 1" caps. Please keep in mind…these are made to fit my chisel sets…might need to change scale for your chisels.
This is my "Leading Edge" Sharpening System. NOTE - The LATEST (Major upgraded) version of my system will soon be available as a ready-to-assemble kit from https://www.gritomatic.com . I will not be updating this version on Thingiverse…
Video on Vimeo: https://vimeo.com/676853535 Inspired by spinning top from Nick_Groot ( https://www.thingiverse.com/Nick_Groot ) I have designed this version. The advantage of this spinning top is that the tip is screwed, so it should…
After using the “Leading Edge” system for a bit, I identified several improvements and features that I thought would improve ease of use and overall outcome; the platform felt too flimsy for me, and the old style threaded inserts were too…
This experiment was to see if I could make a mechanism that securely held chisels and plane irons without too much flex. It works well, but shorter chisels like the Dewalt one in the photos won't do much more than a micro bevel because…
Fully Metric Remix of "Better Chisel Sharpening Jig" by @GarageTimeDavid_3790 Changes: Adjusted hex holes from ¼" (11.1125 mm) to 10 mm to fit M6 bolts Adjusted round holes from 8.4 mm / 6.4 mm to 8.0 mm / 6.0 mm respectively
This is the next iteration of a 3d printable chisel router plane. The original was not great ( Chisel Router Plane 1/2-inch (12mm) by JohnMartin | Download free STL model | Printables.com ) but it worked okay. I had to resolve some…
I always failed in correctly sharpening my chisels, so i thought of a method to always sharpen correctly without spending > 100 bucks for veritas tool. I came up with this solution. You need: Diamond Stone / Wetstone I took the SHARPAL…
Newer more betterful version Chisel Router Plane 1/2-inch (12mm) v2 - Hand Tool Boogaloo by JohnMartin | Download free STL model | Printables.com I went through several iterations of this before I came up with a design that worked. This…
This is a parametric chisel cap/protector. It is a simple but effective design. Theoretically, you should be able to use this with the thingiverse customizer. You simply enter your chisel's dimensions, choose material thickness and cap…
The Skadis Chisel and File Holders are an addition to the Skadis Universal hook collection by CSD Salzburg . In order to use it, two Universal Hooks need to be printed as well. I added a version for 5mm diameters (e.g. small files), 10mm…
BAHCO brand chisel set holder for your workshop to easily gain acces to all chisels. Fits the 6 pcs chisel set. Printing settings layer height is not critical, I used 0.20 mm Printed on X1 Carbon at 100% speed (normal) no supports needed…
This is a remix of the metric remix by @energeticinterpretation44 of the original model by @GarageTimeDavid_3790 All I did here is to enlarge the M6 holes slightly so that M6 bolts have proper clearance. All kudos to the original makers.
Print as per the 3mf file Text upwards and you should not need any supports Take them off the print bed and remove any burrs Then get a tealight candle and remove it from the tin and rub it over the bottom of the guide to make it slide…
I needed a large number of chisel caps for an assortment of chisels with varying thickness of steel. Designed these after not finding what I was looking for in existing models. Prints quick and does not require supports. The compliant…
Original model worked great, but I don't have 606ZZ ball bearings and needed metrical clamps. So here is a remix working with two 608 bearings (print the Roll.stl twice and glue them together). Additionally I made some versions of the…
Uploaded files do not include the logo shown in the photos--feel free to add your own! Print with the back surface down and insert a pause to insert magnets. I used these magnets.
The ultimate chisel holder can be used to hang all your chisels so they are always at hand when you need them. Available in five different sizes for all your chisel needs (five was the biggest I could print on my Prusa i3 MK3S+). The…
***Updated March 2026*** Winged Chisel Plow - 26 Shank 30ft - 1:16th Scale Uses M2 Screw. There are holes that need to be drilled out. These spots are indicated with indents. Remember when loading into your slicer to select the option to…
I needed something to hold my Presch Chisels on my newly created Honeycomb Storage Wall . The hole/holder part is tapered like the neck and the chisels sit really comfortably. You can see the spacing I used in one of the pictures and even…
https://paypal.me/radicalreel The reinforced version is not tested... but should work too. You have to print it on the reinforced side though.
It is good to push the protection on the chisel for support, not by hand. PLA Nozzle - 0.4 Layer - 0.3 Brim
This is a pegboard holder for the standard Narex chisel set .
Chisel set holder (or any other tool that fits) Print with 2-3 perimeters, 15% infill,0.4-0.6mm nozzle, 0.2-0.3mm layer, any material will do. No supports needed, print as shown on picture. 2 hooks needed for attachment to the board,…
Chisel Plow - 14 Shank - Style 1 - 1:16th Scale Uses M2 Screws Recommended to resin print shanks and hydraulic cylinder Hydraulic cylinder uses a 3mm x 21mm rivet 1.75mm TPU used for hydraulic hoses
Gridfinity Chisel Set Holder
This is a holder for the standard Narex chisel set ( 8630-10 + 8631-10)
This is a fan made replica of Mademoiselle Pogany by Constantin Brancusi.
I needed a cover to protect my chisels and I didn't see the sized I wanted. These can be adjusted in Fusion 360 under modify > change parameters. They can be customized to length, height, and chisel width. I created a version for both…
Made using the blank clamp template STEP file from the original model. It fits 42mm planer blades. The slot is 1.4mm deep, so it should fit blades of that thickness or thicker. Since I only had 608 bearings instead of the 606 bearing…
Note that this is for skewed chisels (as used by woodworkers for cleaning out dovetail sockets etc), not skew chisels (as used by woodturners). Skewed chisels ( like these ones ) have a single bevel at a steep angle and make it much…
Tired of cutting yourself on your chisel when you dig for something in your toolbag? Or sick of finding out that the chisel you just sharpened has been dinged by another tool in the drawer? Fear no more, these guards are easy to print,…
This is a slider style whistle (called a Swisel by bixfliz) which you can use to annoy your spouse and offspring. Enjoy! Here's a vid to see what it sounds like: Here's an improved 'plunger' bit: https://www.thingiverse.com/thing:5353211…
Since the original "screw holder" does not fit the Wera chisel driver, I created a variation of it that fits the hexagonal shaft.
The goal of the project was to make a fully print-in-place tool so no hardware is required but clamping the chisel was never sturdy enough. Not sure one the exact size of the screws used, when the outer diameter of the threads was…
Holder for 8 chisel carving knifes from aliexpress. stl ready to print orientation.
This is a chisel rack that is designed around the Chisels from Dictum. It might work also with other chisels that have a similar tapered neck. The is also a version for a non tapered neck (in this case the file). I included the fusion…
Holder for various chisels and punches
Ersatz für den Papierkreisel für die Carrera Go Bahn.
... Print Settings Supports: Yes Infill: 90% Category: Other
Remix on My previous changes to hold one more chisel
Spinning Top modeled after the totem from Inception. You can download one of the pre-cut versions or you can download the entire model and cut it yourself. One version is connected via connector which worked for me flawlessly, the other…
Vimeo-Link: https://vimeo.com/681954298 English: A Tippe Top whose print does not require any supports. Also, finishing is not necessary in any way. Just print, screw together and have fun. To design the spinning top, some prototypes were…
TPU Protection for wooden chisel Print Settings Printer Brand: Creality Printer: Ender-3 S1 Pro Rafts: No Supports: No Resolution: 0.2 mm Infill: 100 % Filament: Polymaker Polyflex TPU 95 A Black Category: Hand Tools
This is an updated version of the chisel holder I made for Jorgensen branded chisels. The interface is a bit tighter, it uses less plastic, but more importantly - it's much nicer to use. The older version would catch when you try to put…
This is a pegboard wall mount for a 3-piece Stanley Wood Chisel set . The mount has holes used with rivets for standard 1/4" holes 1" spaced pegboard, or it can be mounted using screws. The rivets use a small piece of standard 1.75…
A wall mountable chisel holder. Use two screws to secure it to a wall or object. Two versions are available, one with markings indicating 1", ¾", ½" and ¼" chisels; the other has no markings. Designed specifically for KSEIBI chisels, but…
agmcmll created this amazing router plane: Ajustable Router Plane by agmcmll . It's designed to easily accommodate different chisel sizes--so I'm sharing the channels I had to create for my own tools. I have a Narex ¼" and an ancient…
A neat holder that keeps all your stanley chisels together in order in your tool drawer or on the work bench. Can be super glued down or stuck down with double sided tape. Simple to print with no supports at 0.30 mm layer height and 25%…
Chisel Plow - 10 Shank - 1:16th Scale Uses M2 Screws Recommended to resin print shanks and hydraulic cylinder Hydraulic cylinder uses a 3mm x 21mm rivet 1.75mm TPU used for hydraulic hoses
I designed this as a wall mounting bracket to hold a set of 4 Irwin brand chisels. I have it set up on a French Cleat wall but it can be mounted directly to a wall or onto a tool cabinet or table. This is one of many shop tool holders I…
As I never got the results I wanted with the usual Chinese or the other homemade sharpening jigs I was searching for a better solution and low and behold, I found it . Unfortunately the price was rather steep (but justified) and I thought…
Basic wall mounted chisel holder. This was design around the Harbor Freight 12 piece chisel and punch set. More of a utilitarian design without worry too much about filament usage. If I remember correctly one of the lowest tier left hole…
Gisela mini Created for a Patron request If you want to help me keep making free models or to tell me what I should make next please check out my Patreon Category: Games
One rack pair holds a set of three Marples chisels, the second rack pair holds a set of four Narex chisels. See the video here: https://youtu.be/ztdbiVzUNpE
Chisel Plow - 12 Shank - 1:16th Scale Uses M2 Screws Recommended to resin print shanks and hydraulic cylinder Hydraulic cylinder uses a 3mm x 21mm rivet 1.75mm TPU used for hydraulic hoses
Holds 5 chisels using Sy's peglock mounting system. Fitted for Narex Richters and mortising chisels but should fit other chisels as well V2 Is thicker since V1 seems to be bending after long term use
Print with supports for the holder overhang.
Tool holder for 4 pcs chisel set. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 206mm W - 60mm H - 53mm We design all…
Holds 16 Chisel Tip Sharpies Print instructions Category: Art Tools Summary Holds 16 Chisel Tip Sharpies
Maximize your workspace organization with this custom-designed chisel holder, perfectly tailored to fit the IKEA Skadis pegboard system. This 3D-printable model offers a snug and secure fit for your Mitsutomo chisels, ensuring that your…
A gridfinity holder for 3 Stanley chisels (½"/13mm, ¾"/19mm and 1"/25mm). Fits in a 6x2 gridfinity slot and slim enough for a tool chest.
A 1x7 dewalt chisel holder for gridfinity. The blade is not inset, so it can be used with any size less than 1-1/2" The bin is width capped at 37.5mm. Has some linear play in positioning but holds very well. Pictured is printed with 2…
Here are 13 different size chisel caps to protect the sharp end from damage. I printed mine in TPU. They may fit other chisels, but the taper and thickness may be different. You can scale them in in a slicer program to get different fits.…
Chisel guards for the following chisel widths: 1" .75" .5" .25" 1/8"
Simple jig. Use M3 screws on top, and an M8 screw and 608Z (or similar) bearings.
This uses the DDD Printable Wall Control System ( github ) to mount the chisels and mallet. Use the Angle or L-Brackets for the sides - I used 2x1 L Bracket Flat Left and Right for the chisels and 2x2 Angle Bracket Flat Left and Right .…
Wall hanger for Lidl - Parkside chisel kit (6 pieces). available 1-2-3-4-5-6 slots holder bottom end holder must be printed upside down in order to not needing supports bottom holder is large enough for 3 chisels. PLA eSun, 10% tri-hex…
🇺🇸 Welcome to UC San Diego! This model was created in collaboration with 3D artist ang3dp . NOTE - This model cannot be sold physically or digitally, even if you are a subscriber of the MiniWorld3D Reseller License tier. It is meant as a…
Pfeil chisel case Chisels snap into place Case is designed to fit into IKEA KLÄMMEMACKA desk organizer IkeaCase.stl has the cutouts/slots to fit with the wooden box. PfeilCase.stl does not and is just a tray. Video of it here:…
Upgraded version of jcjames_13009 sharpening jig to use two 608 ball bearings for a smoother experience. Use the roll and main body with the rest of the original parts. Press the bearings into the roll and mount with a sufficiently long…
