Wyniki wyszukiwania: jif

Sortowanie

263 modeli

P
PrintablesCDaemon

Fujifilm X-E4 Grip + battery/SD card door access

A grip for the Fujifilm X-E4 that provides access to the battery and SD card without removing the grip. You can use a standard ¼-20 camera accessory screw to attach it via the tripod mount screw. Thanks to the maker of the original model…

Pobrania
57
Polubienia
9
Ocena
5
P
PrintablesPhilo_fo

Lens cap for FUJIFILM X-Half Camera (X-HF1)

I printed it using two color metallic PLA filament and the octagram spiral pattern on the top and bottom. You can obtain the printing setup form the gcode (for Prusa XL) below. The result looks quite good, and given the minimal effort…

Pobrania
19
Polubienia
3
Ocena
0
P
PrintablesDylanRyanDesign

Stand for Instax Polaroid Fujifilm Photos

Simple and Minimalistic Polaroid photo stand Designed this to accommodate some of the dozens of polaroid photos we have laying around the house, prints quickly and looks good in numerous colours. The stand holds the photos at an angle…

Pobrania
2238
Polubienia
491
Ocena
4,96
P
PrintablesPrintile

Disposable Camera Lens Adapter for Fujifilm (Updated)

Note. You have to salvage a lens from a disposable camera. The one I used is from a Kodak fun saver Update v.1.2: Added a knob to lock the focus and adjusted some dimensions. Find a small screw, glue it to the knob and drill out the hole…

Pobrania
1132
Polubienia
154
Ocena
5
P
PrintablesTheCenda

Fujifilm X hotshoe cover

Hotshoe cover with Fuji X logo. Measured and tested on my X-T20, but should fit practically any hotshoe on any camera.

Pobrania
1095
Polubienia
105
Ocena
5
P
Printableseli

X Mount rear lens cap Fujifilm XF

Design for supportless printing, had tried on XF35mmf1.4, XF56mmf1.2 and XF90mmf2.

Pobrania
860
Polubienia
59
Ocena
5
P
PrintablesHans64

Thumb grip for Fujifilm X100 series

I've tested it on Fujifilm X100T and X100F, but it should work with X100, X100S, and X100V too. It has a snug fit so it won't need a screw to stay in place like the ones you can buy do.

Pobrania
847
Polubienia
64
Ocena
4,5
P
PrintablesMakerDAD

Fujifilm Instax Mini Triple Photo Frame

This is a modified version of the "Instax Photo Frame" by o0aaron0o, you can display 3 photos instead of one. Note: It was printed using Cura 4.4.0 with raft and tree supports only. Category: Decor

Pobrania
794
Polubienia
155
Ocena
5
P
PrintablesRT3D

Fujifilm Instax Mini Photo Frame Stand

I created a stand version from my Christmas tree hanging photo frame found here. Reference: https://www.prusaprinters.org/prints/93150-instax-mini-photo-frame-tree-ornament Add the photo and place wherever you like. Update: 06/06/2022…

Pobrania
779
Polubienia
111
Ocena
4,88
P
PrintablesMakerDAD

Fujifilm Instax Square Photo Frame

I couldn't find any frames for the Instax Square Instant Photos so i modified the "Instax Photo Frame" by o0aaron0o Note: It was printed using Cura 4.4.0 with raft and tree supports only. Category: Decor

Pobrania
640
Polubienia
114
Ocena
5
P
Printablesmetalsepp

Fujifilm HotShoe-Cover

Various designs for a HotShoe-Cover suitable for Fujifilm cameras. I have taken the dimensions on my X-T4.

Pobrania
601
Polubienia
66
Ocena
5
P
PrintablesArk

Fujifilm X Mount Body Cap

Model of Fujifilm X Mount Body Cap, needed a body cap, measured dimensions from existing body cap. First design and it fits without additional changes :) Needs to be printed with Supports due to the bayonet mount. Position on build plate…

Pobrania
593
Polubienia
36
Ocena
5
P
PrintablesBjörn

Yet Another Fujifilm X100v Thumbgrip

I tried many of the thumbgrips I found online, but I didn't like any of them so I made my own. I took the best of all designs I tried and combined it into one design to rule them all. You might need to sand it down a little for a smooth…

Pobrania
561
Polubienia
73
Ocena
4,89
P
PrintablesChen Felix

LEICA style lens hood for fujifilm XF23 XF35 f2

LEICA style lens hood for fujifilm XF23 f2

Pobrania
515
Polubienia
61
Ocena
5
P
PrintablesNeilR

Fuji (Fujifilm) X-T20 grip, works on X-T10, X-T30 too!

The Fuji X-T10, X-T20 and X-T30 are great little cameras, but the grip is a bit small for larger hands: your pinkie has no-where to go except under the camera. This newly updated grip provides full support for all of your fingers, yet…

Pobrania
504
Polubienia
44
Ocena
4
P
PrintablesKosut_Ondrej

Fujifilm NP-W126, NP-W126S Battery case

Case for fujifilm NP-W126 and NP-W126S batteries. Optimal wall thickness for the most minimalist design possible. Original and non-original NP-W126 / S batteries fit into the case. Recommended PRINT SETTINGS: layer heigh: 0.13 - 0.18…

Pobrania
494
Polubienia
42
Ocena
5
P
PrintablesTony MaHoney

Fujifilm X-Series Battery Case

**Print Instructions** Supports: No Resolution: 0.15mm or 0.20mm Infill: 10% Printed with MMU2s. But you can print it also in single pieces and glue it together or without the “X”.

Pobrania
458
Polubienia
82
Ocena
4,75
P
Printablessascha

Fujifilm X-E4 hot shoe thumb grip

This is a remix based on a hot shoe thumb grip for the Fujifilm X-A7. Following changes have been made: adapted to the Fujifilm X-E4 resized the part that slides into the hot shoe for a snug fit shortened the grip length

Pobrania
455
Polubienia
28
Ocena
5
P
PrintablesTheCenda

Thumbgrip for Fujifilm X-T20/X-T10/X-T30

Remixed from VZPHOTOs Fuji X100V Thumbgrip. For XT20, I needed it to be a little longer so here it is.

Pobrania
453
Polubienia
45
Ocena
4,75
P
Printablesh19x51

Fujifilm X-Pro/X-T Series Thumb Grip

Reverse engineered JJC TA-XPRO3 grip, not the exact same dimensions but very similar. If someone needs a more FDM friendly version, just write me.

Pobrania
450
Polubienia
38
Ocena
5
P
Printablesfabiankirchen

Disposable Camera Lens Adapter for Fujifilm X-Mount

I adapted the Diameter of the Adapter as well as the Flange to fit Fuji X-Mount Camera. Please visit @volzotan_217694 original Design for detailed instructions. Use the Fusion File to adapt the focal length. The Images I uploaded are jpgs…

Pobrania
429
Polubienia
51
Ocena
5
P
PrintablesMarcin Szyszki

Fujifilm GFX Lens Cap

Lens cap for fujifilm G (GFX) system based on the original cap. No supports needed. I use PETG with 0.4 nozzle 0.2 layer but PLA should also works. I also printed this on resin printer and also fits great.

Pobrania
392
Polubienia
25
Ocena
5
P
PrintablesMadEdd

Lens adapter Pentax K to Fujifilm X

WORK IN PROGRESS: I am still finetuning this design. PK-FX#2v10 is final… for now. I made an adapter to use my old Pentax 50mm lens on my brandnew Fujifilm X-S20. The lens will be fully manual of course, just like in the old days…. ;-)…

Pobrania
387
Polubienia
27
Ocena
0
P
PrintablesMakerDAD

Fujifilm Instax Wide Photo Frame

Fujifilm Instax Wide Photo Frame I couldn't find any frames for the Instax Wide Instant Photos so i modified the "Instax Photo Frame" by o0aaron0o Note: It was printed using Cura 4.4.0 with raft and tree supports only.

Pobrania
385
Polubienia
47
Ocena
5
P
PrintablesChen Felix

FUJIFILM 35mm f1.4 lens hood

FUJIFILM 35mm f1.4 lens hood

Pobrania
382
Polubienia
41
Ocena
0
P
PrintablesDonii

Fujifilm X-T Series Eyepiece

Eyepiece or Eyecup that fits Fujifilm X-T4 X-T3 X-T2 X-T1 XT4 XT3 XT2 XT1 X-H1 XH1 GFX100 GFX 50S Models. I made this design for my Fujifilm X-T1 but it should fit all the models listed above. It was printed with a 0.1 layer height on a…

Pobrania
382
Polubienia
30
Ocena
4,67
P
PrintablesAksium

M42 to Fujifilm X mount Thin Adapter for Projector Lenses

Mounts m42 lenses or helicoids to Fujifilm mirrorless cameras. Note that this is primarily for adapting projector lenses with a focusing helicoid. So, the flange distance is a lot thinner than normal. A conventional m42 lens will not have…

Pobrania
361
Polubienia
27
Ocena
0
P
Printablesaplyard

Fujifilm X-T20 thumb grip

I don't know if it works with other models. Will probably need some sanding after printing in order to fit. Can also be printed in other materials. The one you see in the photo is -sanded with 180 and 400 grit -primed -sprayed black

Pobrania
353
Polubienia
20
Ocena
3,6
P
PrintablesIgoreveech

Canon EF to Fujifilm X adapter

Perfect and secure fit. Correct focal length. Easy to print. Supports are only needed for "Canon side" clips. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Filament:…

Pobrania
339
Polubienia
32
Ocena
5
P
Printablesyukosteel

Fuji X ultra-compact lens rear cap for Fujinon Fujifilm FX mount

Ultra-compact 9mm tall rear lens cap for Fujinon X mount lenses. Standard Fujinon cap is 13.5mm tall, I like more compact Voigtlander cap design for Fuji X lenses. At some point I realized that most Fuji X lenses I have do not protrude…

Pobrania
334
Polubienia
15
Ocena
4
P
PrintablesSunoc

Thumb grip for Fujifilm X100V

Print worked perfectly with PETG, 0,1mm setting. Infill doesn't matter.

Pobrania
322
Polubienia
30
Ocena
3,75
P
PrintablesSenseiShrimp

Fujifilm 35mm F2 WR Lens Hood and Cap

Square style lens hood and cap for the Fujifilm 35mm F2 WR lens. Example was printed on a Bambu Lab A1 using eSUN Upgraded Matte PLA Filament with a 0.4mm nozzle and a layer height of 0.2mm. The model can be printed without the use of…

Pobrania
302
Polubienia
29
Ocena
5
P
Printablesatvguy585

New Version Jiffy Pots / Pots for Modular Hydroponic Tower

I had issues with the original/ jiffy pot being weak. I dropped one and it broke around the longer slits. The stronger vs I linked here also was great but used way to much material. It definitely didn't break easy. **** Pictures show the…

Pobrania
283
Polubienia
22
Ocena
5
P
Printablesitsleon

Fujifilm Instax mini Film / pic box V2

A Box for films and instantpics for Fujifilm Mini V2: tighter pressfit

Pobrania
268
Polubienia
99
Ocena
5
P
PrintablesNeilR

Grip for Fuji Fujifilm X-T3 XT3, includes Arca-Swiss mount

The Fuji X-T3 is a great little camera, but lacks an Arca-Swiss mounting plate. Also, the grip is a tad small, would benefit from a bit more beef. This newly designed grip provides both features, yet doesn't block access to any of the…

Pobrania
261
Polubienia
24
Ocena
5
P
PrintablesAxField

Fujifilm X-Series Battery Case for NP-W235

This is a remix for the larger NP-W235 batteries used on cameras like the FujiFilm XT-4 and later. The holder can house 3 batteries. Ideal layer height is 0.2mm - you can choose to print the logo in a different colour should you choose,…

Pobrania
243
Polubienia
23
Ocena
5
P
Printablessfa

Fujifilm XF 27mm Squarehood

This square lens hood for the XF 27mm f/2.8 lens is designed for two-part printing. Print the threaded base and the hood separately. Screw the threaded base into the hood to your preferred depth and secure it with glue. Leave about 2mm of…

Pobrania
236
Polubienia
21
Ocena
5
P
PrintablesKazi Toad

Fujifilm NP-W126 battery holder

These files are for Personal Use Only . If you would like a Commercial License to sell prints made from these designs, please join me on Patreon : https://www.patreon.com/kazitoad This is designed with spring loaded retention clips and…

Pobrania
228
Polubienia
35
Ocena
5
P
Printablesmaxelman

FUJIFILM Lens Hood for XF23mmF2 and XF35mmF2 R WR Lenses

You may need to adjust the scale for a perfect fit I printed 4 versions (100% 100.5% 101% 101.5%) to find the best fit at 101% for my 35mm lens Printing suggestions: 6 wall loops Variable layer height / smooth layers Automatic bridging…

Pobrania
220
Polubienia
19
Ocena
5
P
PrintablesWgLabs

FUJIFILM XM5 HANDGRIP

my own designed fujifilm xm5 handgrip, you can use ¼" for the 3 thread inserts

Pobrania
217
Polubienia
7
Ocena
0
P
PrintablesSix

Fujifilm X-Mount to 1.25" Telescope Adapter

This is a simple adapter to allow you to attach your Fujifilm mirrorless camera directly to your telescope with a 1.25" eyepiece. Printing it slower to ensure accuracy is probably best. The locking pin does work. It's a snug fit and so…

Pobrania
215
Polubienia
21
Ocena
0
P
Printablesw.wolf90

Fujifilm X-T20 (X-T10) Thumb Grip Rubber

I have lost the camera's back thumb rest molding due to the adhesive given out, so I designed one that fits perfectly when printed with my calibrated 3D printer and retains the original's aesthetics. Even with non-calibrated printers I…

Pobrania
210
Polubienia
14
Ocena
4
P
PrintablesChen Felix

XPAN style hood for Fujifilm XF23 XF35 f2

We recommend you to print with PLA/ABS/Nylon

Pobrania
210
Polubienia
25
Ocena
5
P
Printablesmetalsepp

Fujifilm NP-W235 Akku Cover

Protective cover for the Fujifilm battery NP-W235, the battery for the X-T4

Pobrania
210
Polubienia
21
Ocena
4,6
P
Printablesplocnik

Flat and long Fujifilm NP-W126S battery holder

A holder that fits flatter pockets. Inspired by a model by Thingiverse user netsrac, but laid out differently, made to hold three batteries.

Pobrania
196
Polubienia
20
Ocena
5
P
Printablesdergogo

Fujifilm X-E2 thumb grip

Designed this thumb grip for the Fujifilm X-E2 to sit in the hot shoe and forms around the wheel on the top. Printed upside down with some supports

Pobrania
196
Polubienia
17
Ocena
5
P
PrintablesNeilR

Fuji (Fujifilm) Lens Hood for 16-80 Zoom (FUJINON XF16-80mmF4 R OIS WR)

The Fuji FUJINON XF16-80mmF4 R OIS WR lens is a well regarded “kit” lens, known for being sharp and versatile. It normally comes with nice hood, but this often gets lost or damaged. I searched everywhere for a replacement and, other than…

Pobrania
188
Polubienia
12
Ocena
0
P
Printablesmichelluccote

Two Piece Jiffy Plant Holder for Modular Hydroponic Tower

This is a replacement for the plant holder included in the Modular Hydroponic Tower Garden by boundary condition. Some reviews indicate it is difficult to get the plants out and the holders should not be printed since it waists too much…

Pobrania
185
Polubienia
33
Ocena
4,67
P
PrintablesJimpelom

Fujifilm NP-W126 Battery Case

Awesome Fujifilm NP-W126 Battery Case with lock and simple ejection. The designer aIso incorporated a feature to use the battery orange tab as an indicator wether the batteries are charged or not. If you don't mind about this, the case…

Pobrania
180
Polubienia
15
Ocena
0
P
PrintablesDrKriegerAUS

Parametric Jiffy Box

I needed a simple custom shaped ‘jiffy box’ style enclosure. So I made a parametric model. Overall dimensions as well as thickness can be adjusted. Corner radius has a small amount of adjustment. Design is for M3 button head screws.…

Pobrania
165
Polubienia
14
Ocena
0
P
Printablesdoroteo

Fujifilm X-E4 Grip

The handle design is similar to the one of the originl grip, but 3mm taller. I decided to shorten the bottom part (see image #5) and remove the Arca Swiss geometry. The screw used was the typical one for camara accesories. I removed the…

Pobrania
164
Polubienia
27
Ocena
5
P
PrintablesDr.Peter

JIF Mop holder

This is a holder for a JIF mop. Print laying down

Pobrania
162
Polubienia
19
Ocena
5
P
PrintablesVec4

Fujifilm Instax Mini/SQ/Wide Film Carry Case

Prints in place without supports. Fits around 25 films.

Pobrania
159
Polubienia
24
Ocena
5
P
PrintablesCalarok

Fujifilm Instax Mini - Wall photo picture frame

Hi! I didn't find some nice easy to print simple picture frame for Fujifilm instax mini so i draw 5 models. Really easy to print. You can print the 5 frame on a MK3S in one print with no skirt. Their hole in the back to hang them on some…

Pobrania
158
Polubienia
50
Ocena
0
P
PrintablesFunFunBoy

Fujifilm X-E3 Thumb rest

A thumb rest for Fujifilm X-E3. Category: Camera

Pobrania
158
Polubienia
7
Ocena
5
P
PrintablesChrosta

Jiffy Garden

The 3D model of the flower pot consists of two parts: a container and an insert. The container serves as the base of the entire flower pot and also functions as a water tank. The insert, which is placed into the container, has 18 circular…

Pobrania
152
Polubienia
32
Ocena
5
P
Printablesxol_

FujiFilm QuickSnap Lens for Micro Four Thirds

Summary --- This is a 3D printable body for the plastic lens element from a FujiFilm QuickSnap disposable underwater camera. The Fuji website claims this to be a 32mm lens, which comes to 64mm equivalent on M4/3, from what I understand. I…

Pobrania
151
Polubienia
22
Ocena
5

FUJIFILM X10 MOD (LEICA RETRO STYLE) V2

MORE INFORMATION : https://leonardoramazzotti.github.io/leonardo_ramazzotti_links/fuji.html <div class="article">

Pobrania
140
Polubienia
18
Ocena
0
P
Printablesyukosteel

49mm filter adapter ring for Fujifilm X100V X100F X100T X100S X100 camera

UPDATE [2024-04-26] : Designed improved adapter angular version II 49mm adapter ring for Fujifilm X100 series cameras. UPDATE 01-02-2024: Added V2 with more smooth walls. Remixed the source adapter by doubling its 49mm thread to other…

Pobrania
140
Polubienia
19
Ocena
0
P
Printablesuuild

Fujifilm X Mount DIY Lens - Fujica Camera Donor

This lens is in no way intended to blow your mind, it produces sub par photos, the focus can't be adjusted and the sharpness is lacking. This project is more of a test to play with the limitations. What I really want to do with the…

Pobrania
137
Polubienia
34
Ocena
5
P
PrintablesBam

18mm Pinhole lens Fujifilm / X-Mount - UNTESTED

Untested - 18mm pinhole lens for fuji x-mount

Pobrania
135
Polubienia
13
Ocena
5
P
PrintablesNeumo

Fujifilm X-T3 Battery Holder (Multiple sizes)

I wanted to keep the whole thing as slim a possible so it could be stored in a narrow pocket in a bag. For some numbers there are two versions (Type A and B) that have the battery cells oriented differently. Choose whichever best suits…

Pobrania
129
Polubienia
16
Ocena
5
P
PrintablesWilliam Ward

Willie G Harley Davidson Jiffy stand coaster , blank and a couple others

Wanted a new Jiffy stand coaster if you want different styles let me know, I welcome new ideas.

Pobrania
128
Polubienia
25
Ocena
0
P
Printablesalexcocan

Fujifilm Instax mini 11 shutter button cap

I got a fujifilm instax mini 11 as a christmas gift. The buttons included with the camera did not stick on the double sided tape they came with, so I fired up Fusion360 and after 30min of modeling and 10min of printing I got this. Because…

Pobrania
125
Polubienia
7
Ocena
0
P
PrintablesTait Brown

Fujifilm X100S Lens Cap

After misplacing my own lens cap I designed a snap-fit lens cap. I looked at various sites and there were caps with people's personal brands, caps with no logo, caps with the logo as text. I wanted the actual Fujifilm logo, so here we…

Pobrania
123
Polubienia
7
Ocena
5
P
PrintablesNeilR

Fuji (Fujifilm) X-H2 XH2 X-H2S XH2S Base Plate with Arca-Swiss Adapter

The Fuji X-H2 and H2S are great cameras. This new grip expansion provides full support for rapid mount Arca-Swiss tripods, yet doesn't block access to any camera features, such as battery, display etc. In case you DO want to use a…

Pobrania
122
Polubienia
11
Ocena
5
P
PrintablesGreg Shortland

Fujifilm X-T10/20/30 Grip

Print with no supports, upright. The original creator designed a custom support to avoid the Cura calculated ones, it just snaps off with some long nose pliers. I used a 60mm/s print speed on my Ender 3 Pro, and the Standard Quality…

Pobrania
119
Polubienia
5
Ocena
0
P
PrintablesFredrik

Lens Holder / Organizer - FujiFilm, Nikon, Canon, Sony etc.

My camera gear was loosely stored in a drawer - to organise and enable easy access I created these “pucks”/holders to store my lenses. Each lens has its own “puck”, but the tags are printed separately and can be easily swapped (unless you…

Pobrania
116
Polubienia
26
Ocena
0
P
PrintablesDavid_liao

Fujifilm NP-W126 NPW126 battery case

Very useful battery case,remix by: http://www.thingiverse.com/thing:852737 Modify item: 1.Add hole on bottom of the case,you can take batteries out easily 2.Modify the case size,may can fit more equivalent batteries Category: Camera

Pobrania
116
Polubienia
9
Ocena
0
P
PrintablestheXorios

Instax Fujifilm frame for Ikea SKÅDIS

Small simple frame that is compatible with Ikea Skadis system. Photo dimensions: 86*54 mm. Available in both directions.

Pobrania
115
Polubienia
32
Ocena
0
P
PrintablesSuperWilli

Fujifilm NP-W126s battery case rugged box

Rugged box case for 2x NP-W126s Fujifilm Batteries, nice and slim for taking it with you in your bag. You will need 3x M3x20mm Screws. Edit 2025/01/06: Updated the lid to have more clearance to close easier without interfering with the…

Pobrania
113
Polubienia
24
Ocena
4,67
P
PrintablesTony GRILO

Fujifilm NP-W235 battery box / Boite pour Fujifilm NP-W235

A battery case for the fujifilm NP-W235 Une boite pour les batterie fujifilm NP-W235

Pobrania
113
Polubienia
6
Ocena
0
P
PrintablesGreg Shortland

Fujifilm x Mount Dispo Lens

Inspired by the Dispo Lenses you can find on places like Etsy, and looking a new hobby, this was my gateway into 3D printing. This helped me to start learning how to 3D model in Fusion 360, and to use and calibrate the Ender 3 Pro I got…

Pobrania
112
Polubienia
13
Ocena
0
P
Printablesryandam

Fujifilm X-E5 Thumbgrip

Minimalist thumbgrip for Fujifilm X-E5

Pobrania
111
Polubienia
2
Ocena
0
P
Printableseightbit

Fujifilm X-T4 NP-W235 Dual Battery Carrier

This is a battery carrier/organizer to mimic the one I used for the older style Fuji batteries. Since I couldn't find any existing models, I thought I'd give it a crack myself. I originally intended for a 3 battery carrier, but since…

Pobrania
109
Polubienia
7
Ocena
0
P
PrintablesMaxx

Fujifilm battery case V2 - NP-W126

Made a second version of the original Fujifilm battery case. This one has the latch on the back of the case instead of the side. The latch is wider and stronger. The only support you need is for the lip of the latch. 100% infil 4…

Pobrania
108
Polubienia
11
Ocena
4,5
P
PrintablesZ3us

Fujifilm XT5 Handgrip

Printed with PetG

Pobrania
107
Polubienia
15
Ocena
0
P
PrintablesSteamroller17

Fujifilm Instax SQ1 Button Cover

The Fujifilm Instax SQ1 button is far too easy to press. This little cover just helps prevent those accidental shots by reassessing the button. With my printer tolerances, the clip is a slight press fit over the lanyard eyelet, which…

Pobrania
106
Polubienia
12
Ocena
4
P
PrintablesRuslan

Fujifilm battery case (double) - NP-W126

Holds 2 Fuji batteries in slim case.

Pobrania
106
Polubienia
8
Ocena
4
P
PrintablesEvanRLD

Fujifilm Battery cover for NP-W235

I designed it to protect my Fujifilm NP-235 batteries, these aren't cheap so i prefer not to throw them with exposed connectors. I couldnt find any model with decent lock mecanism, so here it is. Fits the XT4, XT5, XH2 and XH2s batteries…

Pobrania
104
Polubienia
4
Ocena
5
P
PrintablesNeumo

Fujifilm X Telescope Adapter

This model allows you to attach any camera with a Fujifilm X series lens connector to a 1.25" telescope. The telescope side and camera side are separated for easier printing and attached together by M3x8 screws. There are three versions…

Pobrania
104
Polubienia
31
Ocena
5
P
PrintablesManelTo

lens cap for Fujifilm x100

it is best to print with flexible filament

Pobrania
103
Polubienia
6
Ocena
5
P
PrintablesDJ

Jiffy Stand Coaster with Harley-Davidson Logo - Seitenständer Unterlage Anti-Rutsch - MMU Versions

This is the MMU version of my Jiffy Stand Coaster ( https://www.printables.com/de/model/167215-harley-davidson-jiffy-stand-coaster-seitenstander- ) for different Harleys. If you can't find your bike, give me a PM. I have also attached the…

Pobrania
103
Polubienia
23
Ocena
0
P
PrintablesMaxx

Fujifilm battery case - NP-W126

Wasn't comfortable carrying batteries with exposed connections in my pocket so i made this. I printed mine with PLA and ASA on Prusa Mini. They both work. I don't know how long the latch will last but it's a simple and fast print so it is…

Pobrania
102
Polubienia
9
Ocena
0
P
Printablesyogeshp98

FujiFilm x100V - xpro-3 style case

The xpro-3 has a hidden screen and the idea of hiding my screen to be more in the moment of what i'm shooting. Fujifilm didn't announce the xpro-4 so here's my next best alternative. I was inspired to design this when I saw a seller on…

Pobrania
102
Polubienia
11
Ocena
0
P
PrintablesAndreas

Fujifilm Instax wide Film pic box

A Box for films and instantpics for Fujifilm Wide.

Pobrania
100
Polubienia
31
Ocena
0
P
Printablesbenlikethecolor

Fujifilm NP-W235 Battery Gridfinity Holder

I couldn't find a version of this anywhere else online, so I thought I'd make one! This is a 1x1 holder designed for gridfinity. The battery just fits in that size, but the walls are a little small on the sides. From my testing this…

Pobrania
100
Polubienia
10
Ocena
5
P
Printablesthenickdude

Fujifilm X Lens Mount

This is a printable model of the mount found on Fujifilm X lenses, which you can use to design accessories like extension tubes or custom lenses. Print at 0.1mm layer height in ABS (recommended), PLA, or PETG. For ABS I had to set my…

Pobrania
98
Polubienia
17
Ocena
5
P
Printablesroybijster

Fujifilm NP-W126S battery cover

A simple battery cover for the Fujifilm NP-W126S batteries with a small battery state window. Place the cover on the battery such that the orange circle on the battery shows through the window to indicate a charged battery. Place it the…

Pobrania
98
Polubienia
15
Ocena
5
P

Fujifilm X-T5 Bottom Plate

Bottom plate for Fujifilm X-T5, compatible with Arca-style clamps. Threaded version has ¼-20 threads included in the print. Non-threaded version has a plain hole sized for a ¼-20 tap. Gcode is for the non-threaded version in Prusament…

Pobrania
98
Polubienia
17
Ocena
0
P
Printablesappallingdonut7

Fujifilm GFX Front Body Cap

Front cap for Fuji medium format camera bodies

Pobrania
96
Polubienia
4
Ocena
0
P
PrintablesArctic3Design

Lenscap (Fujifilm Mini Evo) (TPU)

Simple lenscap with knurling to match the design language of the camera. Made to be printed in TPU. The model does have quite tight tolerances, but the friction fit is perfect printed on my Prusa MK3 with “Fiberlogy TPU Fiber 40D". If…

Pobrania
94
Polubienia
15
Ocena
5
P
PrintablesKazi Toad

Fujifilm 27mm lens cap

These files are for Personal Use Only . If you would like a Commercial License to sell prints made from these designs, please join me on Patreon : https://www.patreon.com/kazitoad This is a lens cap specifically designed for the Fujifilm…

Pobrania
93
Polubienia
8
Ocena
5
P
PrintablesJenno

Fujifilm Battery Charger Case

Case for Fujifilm battery charger, cable and 2 spare batteries. This my first successful print in place hinge design. Print Settings Printer Brand: Prusa Printer: i3 MK4 Rafts: No Supports: No Resolution: 0.3mm Infill: 15% Filament: Prusa…

Pobrania
91
Polubienia
26
Ocena
0
P
PrintablesSicc Sikk Nasty

Gridfinity Polaroid/Instax/Fujifilm Holder (Instant Camera Picture)

This holder will hold multiple pictures if need be! Infill of 10/15%, 2 walls, 0.2mm

Pobrania
85
Polubienia
11
Ocena
5
P
PrintablesGreg LFT

Fujifilm X-E5 handgrip

Fujifilm X-E5 Grip Better grip feeling and better stability. Supports needed for the bottom screw hole.

Pobrania
84
Polubienia
3
Ocena
5
P
PrintablesThomas Mayr

Fujifilm Lens Stand

Only works with original Lens bottom caps. Shape is slightly conical and was adapted to fit them perfectly. Printed on Prusa Mini+ with PLA

Pobrania
83
Polubienia
18
Ocena
0
P
Printablesminjaep

Fujifilm X-H2 / X-H2S battery grip connector cover

I lost the battery grip connector cover for my X-H2S while traveling. The only replacement I could find was the cover set sold by Fujifilm, which costs $20. As I think I will lose it many times, I decided to model it. If you wish, you…

Pobrania
81
Polubienia
1
Ocena
0
P
PrintablesArucious

Fujifilm X100VI Gridfinity Shadowbox 4Lx2Wx6H

Fujifilm x100vi shadowbox 4Lx2Wx6H Space is optimized so two batteries can also be included Model sits snug, use the eyelets to pull it out if it is too snug, it does not wiggle much. Model stops below the eyelets so you can leave a strap…

Pobrania
77
Polubienia
4
Ocena
0