BMW K100/K1100/R1100 rear wheel wall mount
Need 4x m12 nuts to fit inside the 3d printed part
Wydruk około 5,08 €–6,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 46
- Polubienia
- 6
- Ocena
- 0
160 modeli
Need 4x m12 nuts to fit inside the 3d printed part
Wydruk około 5,08 €–6,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple protector for Pentax K10D/K20D battery terminals. Model of battery of mine is NP-400. I'm also uploading FreeCAD project file. If you are brave enough, feel free to modify it :)
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
For optimal storage of the foam injector on the high-pressure cleaner, this mount was developed. The foam injector is inserted horizontally into the mount and locked in a vertical position by rotating it 90°. This ensures that the foam…
Wydruk około 4,68 €–5,72 € nettoWstępna wycena jednego wariantu
the main k10 spool holder is a little fragile and often brakes with the use of the printer and taking it off the printer is a pain in the bullocks, so i made this spool holder to solve this problem. use the 3mf file if you have a k10 but…
Slider to mount on Y axis to make possible adjust Y inclination and correct frame bending Need a M6 nut and bolt
02/08/2025 - Update Better X mount XY base with optional screw hole Z base and mount Updated config for Z This is a Nema 17 support for EasyThreed K10 and config file to improve quality and speed of printer The config file k10_cfg.txt…
I didn't like how the bed base was designed. the clearance from the front/rear of the rail was very small and it was bulky and too low in my humble opinion. I wanted to raise it a little so the springs will be tighter and allow more…
UPDATE 7.1.25 Added interior model with pockets / hooks for zip ties to fix the light harness UPDATE 8.10.24 I created and added here an interior that is compatible with Trx 2-speed transmission - it has a “box” around it to accommodate…
EDIT 9/24: Added a strengthened variant because as it is close to body clip, I often accidentally grab the exhaust, and finally it broke. ORIGINAL: Hello. Finally did the exhaust for K10 as well. This is modelled after the stock exhaust…
みんな大好き《げっ歯類》コックピット付きK10追加ガイドキットです。 ※このキットにはげっしーは入っていません。
Designed to perfectly fit the Keychron K10 full size keyboard. This model is split into three parts so it can be printed on most printers. Orient the parts on their ends to ensure a smooth wrist-resting surface. I'd recommend supports for…
A Fusecover for the BMW K100 and 1100 with the BMW Logo on the outside. Use support as tree! Printed with PLA as material but i recommend ABS.
This is a repair Kit for Braun “Universalschüssel” fitting the machines K850 K1000 K3000 3210. To remove the broken part you can drill a small hole in its center and punch it out with a nail. To press in the new part, i added two parts…
This is a custom pen holder head designed to replace the standard extruder of the Easythreed K10, transforming it into a cute and functional pen plotter! Whether you're plotting art, drawing text, or just having fun with gcode-controlled…
Mount yer K10 chevy from rc4wd to a vs410 chassis from Vanquish. (also works for Toyota xtracab) print with like 6 walls for strength if needed.
BMW K100/K75 Keychain Printed with BambuLab P1S 0,4mm nozzle
Normaly the bumper can print with the standard nozzle 0.4. But for good faces , you have to place it on the build plate in a angle from 39.50° . The tube was cutted in two part and print with a 0.2 nozzle. For the frontlight pls print…
Replacement model for part described below: GE OEM Part Number WB03K10035 Range Oven Stove Burner Knob Made of Plastic. Has a D shaped stem Number printed on back of it is 183D5598 This fits specific GE manufactured range models…
I apologize for my English, as I translated my language through a translator. I decided to install Easythreed k10 on Nema stepper motors and at the same time increase the print area a little. These parts are not ideal, but still with…
I needed a lens and viewfinder cover for my K1000. The design is just random lines given differing offsets. The lens cover should fit very tightly. However, the viewfinder I made a little more loosely. I had it tight on there, but it…
Simple bracket that fits into the window mechanism grooves to hold the window slightly open. Because the springs in these top-hinged windows are too strong for the window to rest at “slightly” open. My adjustments are at the lowest…
The K10 has a poor printing quality due to the excessive play on the axis plastic sliders. A lot of the movement is caused due to the top feeding design, that restricts you small filament portions at a time. Changing the feeding direction…
Hello. Since I had the K10 cab measured for the expedition frame, I decided to create a top body as per K5 Blazer style. Excuse any proportional imperfections compared to Blazer, I just used photos as source. Side windows have 1,5mm…
Normaly the bumper can print with the standard nozzle 0.4. Support is recommended.
Printed out of PLA at 0.16mm layer height. Support material on build plate is required. May be better suited for PETG.
Electricbox with ECU holder
So... I did a thing... I was kind of bored with the minor tweaks and upgrades for the K10 I was making and I decided to modify it to be "Core XY" (not really, but bear with me) vs. original bed slinger style. What I did was to model…
Version 2 of the Grand Power K100 X-TRIM 9MM 3rd magazine extension. Remix by https://www.thingiverse.com/thing:3733003 Simply take off your old baseplate, put on this extension, and then insert the shim in the rear of the extension. You…
Lenovo K10 tablet holder for wall mounting. The model is upright but use the “place on face” functionality in PrusaSlicer and it prints fine without supports when placed on its back. Printed on 0.4mm nozzle in basic PLA. The dashboard in…
Replacement for original mirrors. Less beauty, less money, more stiffnes. Náhrada za originální zrcátka. Ne tak hezká, ale odolnější a řádově levnější.
Prerequisite ***Feel free to search part replacement that is cheaper for your location *** EasyThreed 3D Printer K10: https://www.aliexpress.com/item/1005008788546287.html 12v 3010 LED Fan:…
So this is my first part for the FCX18 K10. In this case there will follow some more.
“Beyond K10 (K-ten)" is a modification kit for EasyThreed K10, a toy 3D printer. This mod increases rigidity and stability of EasyThreed K10 in a very simple way. K-ten means K-point (K点) in Japanese, a reference line to calculate scores…
This is a mount for a Stream Deck for the Corsair K100 RGB keyboard.
Introduction: This is the LK100, the 300x300mm version of the popular THE 100 printer by Matt the Printing nerd. I take no credit in the mechanical design of the gantry or Z-axis, as this was either altered from the original 1.1 printer,…
The Wainlux K10 is a nice and easy little machine but the laser footprint is small and it's quite difficult to position thing properly. It's even harder to do so when you do a series of the same thing. The laser zone is also very close to…
Hello there. Made another part for TRX-4M K10 - front and rear bumper. They come with EU plate size area as well as areas for D-rings (I have just my own, so the fitment may not be OK, if you need, let me know the details and I will…
This is a simple case for the Unihiker K10. The idea is it exposes all of the ports, speaker, and camera. It snaps together with connectors at each end.This is a simple case for the Unihiker K10. The idea is it exposes all of the ports,…
Rack10 mount for switch TP-LINK TL-SG105
A found mount that sits on your Corsair K100 RGB keyboard.
Z軸ガイドに本体へのボルト固定穴を追加した物です。 本体への穴開けが必須ですが固定はより強固になります。 キャリッジはガイドクリアランスを従来の半分に詰める事でガタを減らしています。 相変わらず「K10では出力出来ない仕様」ですが...。
Print with supports, secure to handlebar with two wide zipties and done. Harness not included. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: Yes Resolution: 0.24 Infill: 30 Filament: Devil Design PETG Category:…
Conversion kit for EasyThreed K10 to print upside-down like the famous “Positron” portable 3D printer. By adding only two 3d-printed parts, it prints essentially the same “way” Positron does! Oh, and it fits into a filament box, too ;-)…
Here is my version of a simple toolbox for the fcx18 K10. Printed with a 0.4mm nozzle,heights of 0.16 or 0.12. Filament could be a silver silk one. Top parts must be glued.
Hello. For quite some time I liked the cab frame of TRX4 Sport. When I got my K10 I played with idea to recreate something like that. And this is the first outcome. It got mounting positions for stock Trx Defender fueltanks + holders for…
This model is a front bumper for the FCX18 K10 and can be installed using the original hardware. I printed it in PETG-CF, but any material should work. I used a 0.4 mm nozzle, 0.2 mm layer height, 3 perimeters, and 15% infill. There are…
Basic wall mount design for Lenovo K10 tablet, I designed it to mount the tablet in landscape mode as I'm using the tablets for flight simulator monitors, but I'm confident it would work in Portrait mode and plan to use one as a Home…
Cooling fan duct for the NVIDIA Tesla K10/K20/K20M series graphics card adapting (2x) 40mm cooling fans in a relatively compact design. While building a new media server and virtualization machine I wanted to add a little extra power for…
A ABS profile for easythreed k10 you can use your own temperature tunning but you have the base
Print at 20% infill 0.15 layer hight Normal supports
Introduction: This modification is a sequential development of the previous version. Let’s be honest — the previous version had several design flaws: mismatched holes and their sizes, as well as general installation inconvenience.…
One of the turn signal buttons on my BMW K100 broke because it hit the tank, so I designed a new one. Mirrored the STL and it works great on both sides. Printed in ABS. Category: Automotive
Trx4m k10 door handle replacements
Canopy I have made for XK K100 RC helicopter. Print instructions Category: R/C Vehicles Summary Canopy I have made for XK K100 RC helicopter. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2…
This is a modified version of the original Unihiker K10 case created by dfrobot.com . I added a connector for lego technik beams (idea stolen from the original case https://www.dfrobot.com/product-3004.html ), modified the buttons to be…
Vertikální držák vodící tyče SK10/SH10, vhodný pro vodící tyče o průměru 10 mm.
This collection of Multiboard fittings keeps your Switchboard S10 accessories tidy and ready for action! Includes K10+ Mop Holder S10 & K10+ Spinner Holder S10 & K10+ Cleaning Brush Holder S10 & K10+ Mop & Dust Bag Holder Requirements…
After printing the original, I realized Shedg's design is for MK8 (6mm) nozzles and my printer uses MK10 (7mm) nozzles. I then printed the design scaled 116% in the x and y, it should have worked, but there was something wrong with the…
Extrusión semi-directa para Anycubic Chiron usando el hotend mk8 /mk10 se utiliza el mismo carro original, pero HAY QUE CORTAR EL VÉRTICE DONDE SE ATORNILLA LA CADENA QUE LLEVA EL MAZO DE CABLES, de forma que la parte superior del carro…
Although the original model includes a hip variation with a socket for a PETG-printed ball, I have been working on a model using the original system from Carbon 13 . I had to make some changes and adaptations, which you can try with this…
This parts are detail for FCX18 K10 frontgrill. Look at picture of the positioning. Parts will be print with a 0.2 mm nozzle. Parts must be glued in the original grill.
Threaded nozzle tray for MK10 nozzles.
Keyboard case modeled to be compatible with the Keychron K10 pro wireless https://cad.onshape.com/documents/5fc32454a189528911ecf189/w/cad0c257882af02f0be269fa/e/e3cf7c916934e5fdda0deab8 Machined from acrylic total cost was 800 USD for…
Maruthi K10 cap for water storage tank for wiper. This is the replacement part for Maruthi K10 car wiper water storage tank. The original one eaten by the RATS. The cap was not available in the market. Hence decided to design our own and…
print the two Adapters for the Orginal headlights and replace with the shipped. install 10mm LED and 3mm LEDs .wire as seen and connect it each to a 20mA cc module like this one MYKSQ20 (10 modules ~ 8€) to your battery 4-26V DC and a…
Blazer Bet Mat The body was mounted on 10 chassis and has 200 holes in the bed. The mat cover that. There is a normal version that ends at the bed and an extended version that closes the gap between the bed and the seat. Blazer Rear…
This is an AK105 style front sight for the older AKM Cyma CM036. It may fit other Cyma AKs (or other brands) if they have the same screw attachment system. You will need the original screw (or the same) to attach the front sight under the…
Hey, Ich habe die Laufrolle für den Schiebetisch einer Rapid PK100 Kreissäge nachgebaut. Es geht um den alten Schiebetisch ohne Teleskop-Auslegearm. Die Bohrung für den Bolzen hat 16.5mm. Ich musste noch kurz nachschleifen, damit es…
MK8/MK10 part design by @dakhunter is great, But I notice some play due to 3M screws gap. I did a quick remix so hotend can be stable. Enjoy ! Category: 3D Printer Parts
I needed a replacement for the original mirror attachment point for my old Nissan Micra K10 1989 since the original is made to break easily, this is not a perfect replacement yet but it works like a charm for me at the moment in petg.
Adapter um einen Scheinwerfer an die 41mm Gabelholme anzubringen.
Original design files - https://cad.onshape.com/documents/c042cd53a3a8f42e803bc789/w/f53b525669e781685b0718cd/e/f29e170ab3cc39542c68d293?renderMode=0&uiState=679beed3a12bf755ba098fc9
I almost immediately broke the mirrors on mine, print these in TPU and never break them again!
This 3D-printed enclosure was designed to house the Wuzhi Audio ZK1001B Bluetooth TWS amplifier , offering a clean and functional setup for DIY audio enthusiasts. The case features a textured finish and compact layout, making it ideal for…
Combined Positron-style conversion kit for EasyThreed K10 by @hoge_coc and EasyThreed K10 Alternative Bed @Eladisimo_355
A remix of the Stream deck mount for Corsair K100 or K70 RGB for better stability
Ein Fensterschnäpper war defekt, und die Nachbestellung wäre zu teuer gekommen. So habe ich einen einfachen Ersatz in FreeCAD konstruiert und auf meinem Prusa Mini+ ausgedruckt. Das Teil funktioniert gut.
This leg helps the mini PC cooling on the underside. The TPU leg is not important to print. UPDATE: v2.0 model allows you to open the bottom door without dismount the leg.
I was spoilt by the Logitech Arx Dock but switched to the Corsair k100. After that I always missed a stand for my mobile phone on the keyboard. So ive created one just as a stand and one with an intake for a QI. It fits for this QI:…
I had the problem that the footrests on my Corsair K100 always folded in when I moved the keyboard sideways. For this reason, I modelled a simple part which I glued into the recess using hot glue. Now the feet no longer fold in. Easy…
Description Custom Corsair K100 Mount for Stream Deck (15-Button): Precision, Elegance, and Seamless Integration Elevate your productivity and streamline your setup with this custom-designed mount for the Corsair K100 keyboard, built…
Bloque para adaptar los hotend cr10/mk10 en nuestras Anet ET4/ET5, esto surgiod e la necesidad de instalar un hotend cr10/mk10 y no se contaba con la manera de que quedara lo mas original posible en cuanto a la altura, ahora con este…
Car holder for Oukitel K10000 Pro monster battery smart phone. Print instructions Unassociated tags: K10000 pro Category: Mobile Phone Summary Car holder for Oukitel K10000 Pro monster battery smart phone. Print Settings Printer: Flux…
This is a Keychron K10 wrist ramp I designed. you use 4 velcro command strips to hold it in place. 2 go on the keyboard and 2 go on the wrist ramp. I printed this on my Creality cr-30 belt printer. I plan on adjusting the fit with the…
Prusa type radial fan (50mm) holder for MK10 extruder. Doesn't require additional HW (bolts or nuts) Chassis will be fasten with the extruder fan bolt (remove the 10mm nylon pipe). Additional support is given by the edge of aluminum…
Summary This is an improved version of the original plexiglass frame for the Kekk Spotwelder K100. The redesigned case integrates the top plate and mounting hardware, creating a more robust enclosure. This upgrade enhances durability and…
Tengo ventiladores de pc, y con uno de 80 haciendo pruebas, al final, me he diseñado una pieza para poder montarlo en el eje Z y enganchada en el soporte que trae la impresora en los ejes (donde se pone el soporte del rollo PLA). Es un…
Well, what else do you expect me to say about this? Print out of TPU and that's it
Hi there, This is a Apple Standard Keypad case who use a cutted ASK plate (M0116 and M0118) This project is related to the ASK60 keyboard case : https://www.thingiverse.com/thing:4013453 Parts that you need ASK : Alps Switchs, keycaps,…
Printed with enforced support with PLA on MK3S+. Please note that there might be other monitors out with slightly different dimensions for connectors and mounting holes. Check your board first before you start printing.
I designed inner piece of dash switch, because I needed ON/OFF/ON switch for additional lights, but had only warning light switch. Once you open OEM switch there is bottom part with copper contacts - remove it, make new contacts out of…
Made with BIT - https://github.com/dppdppd/The-Boardgame-Insert-Toolkit
Updated to use LMK10LUU bearings
This is a wall art of a K10 Chevy Truck. I made it then cut it out on a sheet of metal on a laser cutter.
In pictures old version is used with some physical changes (in order to fit spot welder board properly). Attention: new version includes some dimension changes as mentioned above but it has not been printed/tested by myself!!! I used 4x…