626 modeli
Messerteller für den Navimow i series. (getestet auf einem i105e, sollte auch für den i108e passen) 6 Klingen und 20cm Schnittbreite (original hat 3 Klingen und 18cm Schnittbreite) Benötigt werden neben den Klingen und den Schrauben nur…
Wydruk około 3,98 €–4,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
ASA or PETG 0.15 Layer No Support, no Brim needed 100% infill
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple holder for a xacto knife. It is designed as safe as possible, so it won't open carrying around. Be careful not to cut yourself :) Just pull the little protection ("child safety lock") down while extending the knife. IMPORTANT:…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
Der Schaber kann ohne Support gedruckt werden. Die Dateien sind für den Druck mit PETG optimiert, andere Materialien sind auch möglich. Zur Befestigung der Klinge am Griff werden 2 M3 Quadratmuttern und 2 M3x12mm Inbusschrauben benötigt.…
Wydruk około 2,75 €–3,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dies ist ein Remix von "Interior for a Märklin H0 coach wagon" von jvdwaa. Die Bänke wurden zusammengeführt und schmaler gemacht. Dadurch bleibt auf einer Seite ein Gang frei und die Bänke sind leicht einzusetzen. This is a remix of…
Wydruk około 4,00 €–4,88 € nettoWstępna wycena jednego wariantu
Print the two walls separate, bend and glue into place.
Wydruk około 3,40 €–4,16 € nettoWstępna wycena jednego wariantu
Motivation When bulding a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that allows…
Wydruk około 3,64 €–4,45 € nettoWstępna wycena jednego wariantu
This the Benjamin Franklin Clock version that B&B TECH shared. However, I wanted a better mounting for the clock and a more appropriate pendulum bob that suited my 6mm dowel. I also had lead sinkers on hand to use as weights and therefore…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena jednego wariantu
This model is fully functional and allows the demonstration of the column buckling (Euler buckling). The screw & nut is based on this script: https://www.thingiverse.com/thing:193647 Print Settings Printer Brand: Prusa Printer: I3 MK3S…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Note to printables staff : this is NOT a remix of a different model that doesn’t allow remixes, it is an original design of my own making where I invested significant effort. As proof, I am including the Fusion360 CAD files here to prove…
DNA double helix with a X-ray diffraction-inspired base in honor of Rosalind Franklin. Remixed from DNA helix by linew (https://www.thingiverse.com/thing:3980700). Rosalind Franklin's research as a chemist and X-ray crystallographer was…
Here is a fun and easy to make Klingon d'k tahg knife from Star Trek. Features side blades that open using a simple slide lever on the back. Update February 11 2023 - Added an alternate side blade with a notch cutout, as seen on DS9. It…
Easter Cookie Biscuit Gingerbread Cutter (approx 50-60 mm) You can change scale in the Fusion 360 File in Parameters Table, for make the cutters bigger (X and Y axis), without to increase the wall thickness. (See attached picture with…
Check out this video of me testing different elements of the design! If you want even more sizes, check out this video on how to edit my f3d model! This scuba tank holder prevents your tanks from rattling and rolling when driving to the…
A play of light and shadow, kindling for whimsical fables. Open source version of https://cosmicjubilee.com/designs/twinkling-bloom/ - available to buy now! A tealight holder with delicate tendrils growing from its base, designed to cast…
5/10/23 update: I also created a new alternative remixed version using toothbrushes/brass bristle brushes that looks like this, which you may prefer if you don't like the paper towel solution in this design. If you have a spare…
My uncle and my little cousin recently got into model railway again. Since it is not very easy to put these H0 gauge trains with 3 el. conductors onto the tracks, I designed this little aid. You put the aid onto the track (in my case…
This custom putter was designed to fill a gap in the golf world. Price. Now, not everyone needs to spend a small fortune just to get a competitive edge in the short game. Complete with customizable weighting to boost performance, the…
Die Version mit den Ausschnitten ist für die Verwendung einer Oberleitung (siehe Bild). Man braucht die Base zweimal oder die beiden Versionen mit den Cut outs. Dazu das Top-Teil und optional den Connector, um die Brücke von unten beim…
Keil für Fliesen Nivelliersystem der Firma Kubala. Wedge for tile leveling system from Kubala. Klin do poziomowania płytek Kubala Smart Level Print Settings Printer: DIY Prusa Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Notes:…
A minimalist 3D-printed desk tray designed to keep your essentials in order. Perfectly fits two pens and an AirPods case, this sleek organizer sits neatly under your monitor or beside your keyboard, bringing both function and elegance to…
Holder (standing or wallmount) for Märklin MobileStation 2.
i cut it into easy to assemble parts and optimized it for printing
Adapter for Wera wisselklingset 9mm to regular hexbit. This way you can use standard hexbits in your toolset. Fit is thight, no detent or interlocking parts
For the more skilled soldier of the empire, the mek'leth favors skills of speed and dexterity over strength. Designed in Fusion360 (this was a new type of designing for me and I am proud how it came out). I printed this in PLA with a…
Another Army of Cute Baby Ducklings🐥 , ready to cheer up your bath (yes, they floating on the water)!
This is a set of Viaducts that can be used with Marklin's Z scale track. It's limited to an oval configruation at the moment, but still pretty cool. This is an update to a previous design I made, which improves the clip used to keep the…
Ersatzmesser Ersatzklingen Für STIHL FSA45 Polycut 2-2 / Replacement blades for STIHL / Stihl Trimmer Blades
Rerailer tool for Märklin H0. Makes it easy to place multi-axle wagons and locomotives on the track. Prints without supports. Put the rerailer on the track. It fits all types of track (M, K, and C) and has a tab on the bottom to prevent…
Orginal model: Pillars for Märklin bridges (compatible 7252 / 7253) by ccs66 - Thingiverse This is a edited version. It can be printed in one step without supports. The original must be printed with supports.
English Introduction: This 3D print template allows you to create a scraper with a plastic blade that won't damage your print bed. The plastic blades are printed with a 0.2mm nozzle, and it's recommended to use the provided print profile.…
Vielen Dank an die Ersteller der Modellvorlagen, die Maße passten bei mir perfekt! https://www.printables.com/de/model/920133-segway-navimow-i105e-messerteller-fur-6-klingen-un…
A simple wine stopper that you can use either for still wine or sparkling wine
Klingon Bird of Prey All the assets for this model were pulled from a video game, therefore is not my original creation Converted the game 3d files to import to freecad and then made several corrections in order to be 3d print friendly…
A very basic 4% grade to place under your HO track to create an incline. This design is about as basic as it gets Print instructions Tested between .15 and .3 printing. Recommend %5 rectangular infill. I would avoid 0 bottom layer option,…
A custom, no support solution for your H0 scale tensioned catenary needs. Comes with three types of masts: Regular, Tensioner and End-Stop To make the overhead line sway left and right along the path there are IN and OUT versions of each.…
Doporučená rychlost tisku 50 % – Tato pomalejší rychlost pomáhá zajistit čisté detaily a optimální kvalitu díky četným podpěrám stromů nebo mužete 100% ale záleži na tiskarně. Orientace tisk muže na stojaka. Výška vrstvy doporučuji 0.08…
Dies ist ein Remix von "Interior for a Märklin H0 coach wagon" von jvdwaa. Die Bänke wurden zusammengeführt und schmaler gemacht. Dadurch bleibt auf einer Seite ein Gang frei und die Bänke sind leicht einzusetzen. Falls die…
Brückenpfeier für Märklin 74613 74618 74620 74623 74636 Die Abdeckungen benötigen Support! Alles andere kann ohne Support gedruckt werden
Here is a D'k tahg for a Klingon warrior as seen in Star Trek. It consist of three parts including the blade and two halves of the handle. It is assembled with two 6-32 screws and nuts. One side of the handle features a round counter sink…
Messerteller für den Navimow i series. (getestet auf einem i105e, sollte auch für den i108e passen) 6 Klingen und 20cm Schnittbreite (original hat 3 Klingen und 18cm Schnittbreite) Benötigt werden neben den Klingen und den Schrauben nur…
I always felt the pillars needed a proper bridge when crossing other tracks, so here it is. The bridge can be used with Märklin 188.3 mm C-tracks. The 3MF file includes supports for the parts that will rest on the pillars as well as a…
Designed for simple printing, though I printed with 0.1mm layer height to keep some of the detail. Installation is simple, slide the roof of, drop the print in and close the roof again.
I could not find one here so I made one. Klingon Bat'Leth right out of Star Trek. Update I really wanted a smooth surface. Well I sell doming epoxy for a living for doming name badges, jewelry and promotional items. I decided to dome the…
H0/HO Coal cargo / Kohle Ladung für Märklin Hochbordwagen size: 87x29mm 97x29mm 144x29mm remixed from https://www.thingiverse.com/thing:3200942 The dimensions are actually slightly bigger, they fit my Waggons qiuet nice with less wiggle…
parametric Doorplate / Nameplate parametrisches Türschild ------------------------------------------------------------------------------------------------------------ Disclaimer: I made this to be able to swap the doorplate at the flat of…
NEM bus for Marklin 3054 shortcoupler
This is a model of a small turn-table that is compatible with the Märklin / Trix C-Track system. It is meant to model the small turntables you would find connecting industries or in old stations, to shunt small two axle wagons between two…
Credit to the original model, it's really well designed. This version adds a slot to run a ratchet strap, and makes it easier to mount to a board or the wall by flattening out the bottom of the bungee holes, and providing a screw hole.…
This is of interest to you 🌟 Welcome to the community! 🌟 Are you a shop and do you want the commercial rights to the models? Do you want to receive 4 unique models? Take advantage of the offer 5 dollars per month for the first 100 users.…
Gardena Sileno Minimo Messerteller für 9 Klingen
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 45° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/minishev Patrons have access to all my files in one…
Thanks for sharing your nice design of coal loads, "zbigmik" ( https://www.thingiverse.com/thing:3179335 ) This is an adjusted/re-sized version of the "h0-files" to create a simulated load of coal, ore or rocks for my Gauge 1 (1:32)…
Pillar for double track Marklin bridges. I use this pillar to support 4 C-rail arched bridges 74636. I created 2 variants, One with a support for a catenary pole, one without the support. The Pillar is 112mm tall. If required, I can…
Klingon Bat’leth A bat'leth is a curved blade approximately 3 feet to 5 feet long, with two spiked protrusions at each end and three handholds along the back which can be used to twist and spin the blade rapidly. The bat'leth (Klingon:…
This is a replacement foot for IKEA Franklin stools. The higher version of this bar stool has different floor to leg angles at the front and rear legs, so an already available design ( https://www.thingiverse.com/thing:3591907 ) did not…
Hilfsmittel um Mähroboter Klingen zu Schärfen. Getestet nur mit original Worx/Positec Klingen, andere könnten durchaus auch funktionieren. Die Klinge sollte aus Sicherheitsgründen nur mit einer Zange eingesetzt werden. Kann auf einem…
Die Einrichtung für den "4068" passt auch in den 4024 Speisewagen. Nur ein Teil der Küche aus "Interior for the Märklin 4068 SBB- Restaurant car" von ccs66 habe ich remixed. Dazu habe ich von "4068-2-1" aus dem Original ein Stück an…
parallel tracks have a distance of 77.5 mm at Marklin for R1-R3. this ruler helps to position the tracks
This uncoupler makes it easy to reach the couplers even when tracks are close. The model prints without supports.
Here's my take on the TOS Klingon disruptor. There are separated disc sections that need to be arranged in the correct order, so refer to the diagram to assist. The emitter base is a thin fragile part so there are two options: one printed…
Gleisabstandshalter für Märklin C-Gleis 77.5mm / Track spacer for Märklin C-track 77.5mm Category: 3D Printing
Here's an easy Klingon communicator to make. Uses 6x2mm magnets. No supports needed. Display stand included. Filaments Used PLA, CC3D Antique Gold and Prusament Galaxy Black and Silver. Buy prints of this model: Ancient Stone Inspirations…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This device is for propagating trees/shrubs Dieses Gerät dient der Vermehrung von Bäumen/Sträuchern print two of the domes scale the domes for your needs no support needed fill the domes with soil moisture the soil take branch of a tree…
Motivation When building a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that…
A good friend of mine had a Star Trek Themed wedding. I decided to design a Baldric based upon the one Worf wore in TNG. It is made up primarily of the rings and loops. The loops have an opening that allows the rings to be connected to…
Motivation When building a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that…
Um Spur Z Züge reinigen zu können, die total verharzt sind, brauche ich eine Lokbadewanne. In der “Wanne” sitzt der Zug auf einem Gleis, das mit Spannung versorgt wird, so dass der Zug in der Wanne fahren kann. Die Wanne wird dann mit…
This is a simple but cute duck! For the duck to be colors you will need a printer capable of printing multiple colors in one print. Feel free to change the size to what you want! Enjoy!
A printable model of the Ugly Duckling minion from FFXIV. You may have to scale the model up significantly due to skewed in-game units converting poorly to real-world units. Edit 2/5/22: Split version added to allow flat printing of duck…
Model to mount NEM362 coupler on Marklin 3064 or equivalent
Figura de accion de Franclin de 10 cm de alto 10Cm tall Franklim action figure
Today is a good day to dry!! Upgrade your bathroom with superior Klingon technology. This 24th century design upgrades your single bathroom hook to the next level in aesthetic design and functionality. It is capable of hanging at least 2…
Moin, original sind nur 3 Klingen an der Messerscheibe, war mir zu wenig für ein gleichmäßiges Schnittbild. Da es fast nur platte Scheiben ohne Design und mit Einpressgewinde online gibt, habe ich mir ein eigenes Modell erstellt. Warum 7…
chamfer on bottom to compensate elephant foot 3 perimeters line width 0.45 0.2mm layer height TPU flex material 0.8mm top/bottom tickness hide seam no retraction top pattern: concentric
The symmetric model fits for example RIC-X wagons, the asymmetric one on “Doppelstock” wagons.
Einfache Aufgleishilfe, es wird Support benötigt, kann auch über eine Weiche verwendet werden Simple rerailing aid, support is required, can also be used over a turnout Category: 3D Printing
The servo is controlled by a ESU SwitchPilot Servo and is setup to move the slider 7mm. On top of the servo mount, it is possible to add 2 microswitches to report the position of the servo. The doubleservobase can be used to pilot the…
My copy of a Finger Reel! printed at around 75% give the right size. i simple file down the two middle surface and glue them together. i use masonry cord and a 2$ double lock snap from the hardware store. total cost around 5$!!! very…
Transfo AEG - pour wagon type SSI 53 - Marklin 4617 Version corrigée : le haut a été découpé et le layer vide a été supprimé. Le haut peut être imprimé sans support et collé ensuite.
Klingon Bird of Prey Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of…
Incense holder replica from DS9 - Sons of Mogh Caution - PLA is combustible, put an aluminum plate inside to prevent potential fire. Do not use unattended. Use at own risk. Version 1.1 - improved support for legs. Badge.stl is needed by…
Remix more simple to print faster :) Available in different lengths as orginials 11mm (as resquest of a user) 28/10/2024 22mm 29,4mm 36,8mm 44,2mm 51,6mm 59mm 66,4mm 103,4mm 147,8mm 172mm 180mm (as resquest of a user) 27/12/2025 188mm…
From the Original Star Trek TV Series
The Glitter Red Rose is a refined 3D model inspired by the timeless beauty of a classic rose, enhanced to shine with glitter-style red filament. Its clean, layered petals, smooth stem, and balanced base create an elegant sculpture that…
A servo mount for Marklin C-rail switches with possibility to feed back the position.
Motivation When building a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that…
Dies ist eine Inneneinrichtung für den Märklin Schlafwagen 4064
Upper shell for the common Märklin H0 metal frame used in many models until the 70s. This is meant as a replacement for the upper part of flatcar Märklin 4503 of type X 05 Klms . The shell has only RIV markings and flat surfaces for…
Kids happen to crash things. Maybe this helps to not have to buy a new bell. Printed with variable layer height on a prusa mk3s.
With this Piece, you can connect your Märklin modelrailroad with normal Lego pieces.
german version below This is an interior design which kind of matches the outside description of the coach: A4 ümg which was to my knowledge a compartment coach. As I didn't find nice or affordable interiors I designed that one my self.…
Here's my version of the Klingon communicator prop. It's a simple model and easy to assemble. The lid has a cutout area that you need to be careful about removing the supports at. Display stand included. Update November 6 2026 - Added a…
Klingon Bat’leth A bat'leth is a curved blade approximately 3 feet to 5 feet long, with two spiked protrusions at each end and three handholds along the back which can be used to twist and spin the blade rapidly. The bat'leth (Klingon:…
Material: 15 g TPU (geschirrspülerfest / dishwasher safe) Druckereinstellung: Layerhöhe 0,2 / Infill 20 % honeycomb / Wände 3 / Schichten 5 oben, 5 unten / No Support Gutes Gelingen und über ein Like würde ich mich freuen. Good luck and I…
Halterungen zum Anschrauben der Märklin Gleisbox man benötigt zwei der Halterungen diese wird dann mit jeweils 2 Senkschrauben Durchmesser 3 befestigt Brackets for screwing on the Märklin track box you need two of the brackets this is…
![[V2] TankLink: Your Modular Scuba Tank Holder](https://media.printables.com/media/prints/1107307/images/8367429_7e159193-3de8-4c8f-acf3-7909c09eda2f_55613600-6a71-4dd5-a436-e10cf06ebf3e/img_9085.jpg)
