Liczymy pasujące modele…
Purely mechanically controlled filament winder for Bambu Lab P1, X1, X1C or X1CC 3D Printer. Printed on Bambu Lab X1 CC. Watch the videos first at the bottom, at the end of the description. If there is news about the model, you will find…
I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…
This Silica Box is for the AMS Hydra Mod , but it also works perfectly with the standard AMS. It fits perfectly and the volume is larger than in other versions. There are also versions that support a Hygrometer. This is the Hygrometer I…
This design improves the original Bambu Lab reusable spool holder in the following ways: Allows you to see how much filament is left on the spool and uses less filament to print the spool due to the hexagon pattern on the sides. Also, the…
🔧 Important: To achieve crisp, readable lettering, a 0.25 mm nozzle is required . Larger nozzles (like 0.4 mm) will not render the fine details of the raised text properly. 🧩 Two printing methods: Requires 0.25 mm nozzle for best results.…
A 3ml vial labeling jig. updates: 2/17/26 - Alignment slider is still a little more loose than I'd like, and hash marks could use a little better definition. Updates should come pretty quick, plans from 10ml vial in the near future as…
There are already a lot of other LED-Riser frames for the BambuLabs X1C out there. So here is what makes my version special: gives additional headroom for the bowden hose so filament will hopefully never again break at the extruder when…
Background The PLAb System We all love our friends at ThorLabs, but sometimes you just need a quick part and you don't have the cash or time to wait for one to arrive with your order of Lab Snacks. The solution, 3D printable…
Made a box for the dymo 160 label printer . I'm still a newbie at fusion 360, so it's not a perfect fit, but close enough :) You'll need to print one each of the (box, lid, infill, seal), and two latches. The infill I printed a semi-soft…
10 ports keystone patch-panel made to fit in 10-inch racks.
Needed a thermal roll holder smaller than the width of my desk. This sits on top and lets the roll feed from the top. Just print 2 of the feet, 2 of the pegs, and one of anything else. Just need to glue the pieces together. Fits the Comer…
This is connected with me being the new owner of a Bambu Labs A1 combo. Specifically, this adapter will shrink the hole in the centre of your Anycubic filament spool so that it works with the Bambu Labs AMS system. Also it has a super…
A printable face shield for the Corona outbreak, based on the Prusa initiative, you can get more info at https://github.com/FabLabUChile/fabuchile-face-shield This design doesn't involve modifying the commercial parts nor the printed…
Simple model of an attachment to mount the QR stickers on the aftermarket build plates, found no easy way to make the QR code stickers stay permanently attached to the build surface. Found this way you can use a little glue stick on the…
i added a bigger drawer to fit the size of bambulab - accesory boxes also added a bambulab logo and a inlays for bambulab noozles and different stuff…
Designed for a DIY Accelerometer Trigger for the LabRadar Chronograph Trigger housing has a cylinder for the trigger assembly and a hole for the wire to exit. A velcro strap slot allows for securing mounting without a picatinny rail. Also…
laboratory/microscope glass box for storing glass with tissue sample
Use color change g-code to make it easily readable. The mounting holes should line up with REV robotics 8mm hole spacing.
A simple Clip to attatch labels to all sizes of euroboxes. I would suggest printing in PETG and at least two walls. The design uses one M4x6 Screw to secure the clip to the box.
The makerspace that I volunteer at got some Bambu Lab P1P printers awhile ago. I made this model to celebrate our new printers.
This is a 2x1 Gridfinity bin with cutouts to hold two Flashforge AD5X nozzles - and two lid options. Thanks to Chir and Jimoreno for the original designs.
This is a remix with braille labels added. The Nemeth braille code is used for these angle labels. Category: Math
just scale to your desire and print.
Jmenovka co nesmí chybět žádnému Santa Clausovi na stole . Vytvořeno v Blender.
I've bought an USS Drybox expecting that I could print the label with the filament inserted to use it as sample, but the smoked plastic is too dark so you cannot see very well throught it, so I've designed this sample to be attached to…
This is a plant label for your potted plants. I only have made basil so far, but am looking to make more as time goes on (let me know if there is a specific type of plant you would like me to make next). I printed this on a Creality Ender…
For 3 mm diameter spatulas, snaps into holder and is held to keep off table surfaces.
I like the modular design of FilarworKs Master Spool, but for me it was lacking some features. I wanted an area to stick a label to without it being unsupported at large portions My refill-filament was too wide for the standard…
So short story on this is nothing more than saw it for sale online by someone else, I wasn't willing to pay what they were asking for it so I made my own. Site wouldn't let me upload the excel file as is so I zipped it up
Tiny labels for your mini Wera screwdrivers. I use them with the metric hex set and store in a Gridfinity stand next to my printer. Attach with a tiny dot of hot glue. I had the best luck printing text side up with a brim. Hex set:…
Please feel free to print and upload a make. I designed my model to be easy to assemble with simple dowel joints There is a PREVIEW FILE , a PRINT IN PLACE FILE , and individual SEPERATE FILES so you can pick which one you want to print.
These button labels are designed to be printed separatly from the main button box. Simply glue them in place and use a permanent marker to highlight each symbol. Feel free to ask me about any question you have. Leave a comment and I will…
Bambu Lab P1P/P1S parallel screen base with locking mechanism Same locking mechanism as the Bambu You may need to trim the locking teeth, depending on your printer Compatible with original Shroud
Aperture Laboratories 3D text, from Portal games.
This is designed to poke into the soil and then the label fits between the forks at the top Improvements and remixes welcome
Many of the "Poop-Slides" require you to remove the external Spool-mount on the rear of the printer, or at least prevent you from actually using it. This, as well as my strong aversion from drilling into my printer, smearing glue all over…
Print and Glue this on the side of an ammo box and it makes a great gift. I made this for a white elephant gift on an ammo can, but remixed it can be a label for any storage box. I sliced it to have a pause to change filament color at the…
Modification of side mount of original by just adding 2 grooves and imprint “multi version”. Looks funny because I had to switch to another colour midprint. Also made rubber feet from TPU 60A (Recreus Filaflex).
this is a mount for a 9x13.3mm switch to mount where there is the hole on top
So i really liked this model but the insert was too big for all my rolls so i just designed it smaller !
Bambu Labs is a 3D printing company that I am not associated with in any way. I've only created a replica. This plaque has the Bambu Labs logo on it. You will need to add a pause to layer 55 to change the color to green. If you want to…
This model allows you to use any 1u 10 inch mounting plate as the cross member in the Labrax 10inch rack. This means a smaller printer can be used and also allows for new mounting options at both the top and bottom angled areas. Total…
There are two models in the download, one with cutout and one without. This cutout is made for the clearance of the nut for the Z-axis pom wheel. I have made this for the EZR Extruder, for straight filament paths. Print it on the side…
"Discover our stunning collection of sleek and stylish round vases, available in three different sizes. Elevate any space with their contemporary design. Check out our profile for more household items."
"Discover our stunning collection of sleek and stylish round vases, available in three different sizes. Elevate any space with their contemporary design. Check out our profile for more household items."
"Discover our stunning collection of sleek and stylish oval vases, available in three different sizes. Elevate any space with their contemporary design. Check out our profile for more household items."
Easy to print brackets to mount the Bambu Lab A1 mini build plates under the desk. Each brackets feature two screw holes for 3mm screws. There are two versions available. One holding tree steel sheets and the other holding five steel…
This is connected with me being the new owner of a Bambu Labs A1 combo. Specifically, this adapter will shrink the hole in the centre of your Anycubic filament spool so that it works with the Bambu Labs AMS system. Also it has a super…
Notice! This is only compatible with Python for the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. About This is an XL remix of the Python Silica Gel box. It's works the same but…
A rack to store your filaments, sized according to the BambuLab AMS specifications. Obviously it will work for any filament spool that is not bigger than a Bambu spool (which is a lot of them). Designed for quick print, easy production,…
These Idler blocks lets you use M5 hardware to tension your belts. You need 2xM5 nuts and 2x M5x20 bolts. The Idler towers needs to be drilled out with a 5-6mm bit to make room for the bolts.
I've completed the LED lighting frame published by Daniel (thanks to him) with a support for AMS that allows you to remove the glass cover without removing AMS. This allows efficient heat dissipation when printing PLA and other materials…
This is a guide for aligning the build plate on the Bambu Lab A1 printer I designed in Fusion 360. I have been having problems getting my build plate perfectly straight on my new A1 printer so I designed this to clip on to the right rear…
An organiser holding 2 TZ (TZe) Brother label maker tapes I use it to keep yellow (warning) and red (danger) tapes at hand Print notes No supports needed Updates log 2024-10-12 Initial version released Support the author The model is free…
Measure device for Bambulab 1kg filament spool single color Print from bambulab PLA BASIC. No supports Layer 0,2mm Infill 15%, GYROID. Print it! Enjoy it! And check th multicolor version!
Measure device for Bambulab 1kg filament spool MULTI color Print from bambulab PLA BASIC. No supports Layer 0,2mm Infill 15%, GYROID. Print it! Enjoy it! And check the single color version!
Gedruckt wurde auf einem Prusa MK4S mit 0,4er Düse, PETG, auf der Rückseite stehend. Kein Stützen erforderlich. Befestigung mit 2 original M3 Prusa Schrauben + Muttern in die vorhandenen Löcher.
A parametric label holder for shelves, bookshelves, desks, etc. This model is fully customizable and can be made in any size you need (Note: You will need Autodesk Fusion for this.) The benefit of a system like this is that you can swap…
Lab rat monument with DNA pedestal (no glass) For real glass instead
So I have a really nice embossing label maker, the Duramatic G-5. It was made by Dashew Business Machines, and from the original packaging and paperwork that I received with the label maker, I am guessing it was manufactured and sold in…
This is a hollow D20 you can print in place and when it's done, hang up from the top (there's a 3mm hole) and fill with small things, like candy or regular sized dice. I tried to print it a few ways and ultimately rotated it so one number…
Hier eine kleine Aufbewahrung für den CLabel Ettikettendrucker 221B.
Really simple slab stand. printed with 3 walls at 20%infill gyroid (card stands easily but could be printed higher for more weight) slight angle to allow better tabletop view Thank you for looking!
Bins for small components. I use it for transistors, capacitors, LEDs, etc..
Cheek rest that can extend 15mm higher than the original and still goes all the way down. Print and use the same as the original. Update: Added one extended by 30mm from the original as the 15mm was barely tall enough.
Here is my design for desiccant containers that fit the Bambu Lab AMS. I started with looking at how other folks approached this issue. In the end I decided to make my own version. This design requires zero supports and isn’t printed on a…
a anchor for a 6x10 chain that bambulab printers use, the chain i got from aliexpress was missing this side of the chain, and only had the matching opposite part i needed this to use the Siboor horizontal draghcain parts with an…
Love my Voxelab Aquila printer but I dont like how the screen hangs off to the right! So, I designed a Screen Tuck Mod to get the display closer to the printer. Much better! If you like what I do, buy me a coffee from the link below. :)…
I made this because people kept busting into my meeting rooms. BOM M3x6 BHSC (4 units) M3x4x5 Heat Set Inserts (4 units) Letter sized paper Labels See ‘Availability Sign_Label’. I included a .docx file so you can customize the label. Cut…
I didn't use the plastic label covers so I needed the end caps to be thicker.
Starts at just 18 grams each at 100% scale! Scale up if needed! Great for paint parties and crafts. Flower shape with 17 compartments. Anti-spill brim included. 125% Scale shown below - 48 grams - Bambu MINI Matte white PLA Think I'm…
Components : Filter P3D-R (HEPA13 + activated carbon) H12 fan DC 24V power supply Remote control EPDM gasket … Key Features 1. Minimize harmful emissions Incorporates a HEPA13 filter to trap harmful ultrafine particles (UFPs) emitted…
microRACK was designed to solve a problem of building a homelab in limited space with maximum versatility. It's follows standard rack spacing with each module being 1U (approx. 44mm). The modules are fastened to the track using standard…
I like the modular design of FilarworKs Master Spool, but for me it was lacking some features. I wanted an area to stick a label to without it being unsupported at large portions My refill-filament was too wide for the standard…
This organizer can hold a label roll for the Brother QL800. Two version are available for the 29mm and 62mm label rolls.
Notice! This is only compatible with Python for the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. About Notice: This is for the round Hygrometer, there is one available for the…
Notice! This is only compatible with Python for the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. About Notice: This is for the rectangular Hygrometer, there is one available for…
Because my Picatinny rail was too short and the standard off-the-shelf Lens-Protectors did not fit, I designed this shorter version. (mounted on a Tavor T21) The lens is taken over from the normal lens protectors that can bought e.g. on…
Important: Requires additional hardware: 4x - M4x40 (DIN 7991) 4x - 10mm spacers (4mm inner dia) 2x - Zip Ties 3.5 x 200mm Max printing height will be reduced by 10mm (as we need to raise the bed by 10mm to avoid crashing into the wiper /…
Nachfüllbarer Deoroller Deoroller wird aus 4 Einzelteilen zusammengesetzt. Innenteil wird durch eine Gewinde nach oben und unten bewegt. Deckel und Grundkörper haben ein Gewinde um den Roller verschließen zu können. Deckel und Unterteil…
Was looking for a useful way to mount a working light on the P1S. Planning to print the side spool holder , I saw a nice opportunity to add it there. Maybe it's also helpful for anyone else. Had a clamp gooseneck lamp ( Amazon.de ) in use…
What a POC for a 10" rack POC for a modular compute blade 1U system very shallow depth (~100mm) Why Modularity, I like the idea you could swap out some of these with a custom module. 10" rack width and limitations of my Prusa Mini's bed…
Notice! This is only compatible with the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. Buy Mega Python hardware kit You can now buy the Mega Python hardware kit from our partner…
Cześć Festool-maniacy! Tym razem udostępniam Wam etykiety dla wyrzynarek marki Festool! Do wyboru macie etykiety dla skrzynek drugiej lub trzeciej generacji. Zalecam drukować w PETG/ABS ponieważ PLA w rozgrzanym samochodzie może się…
Parametric buttons to easily customize the layout of your Kenwood radio's programmable function buttons. With up to 11 configurable function buttons, the TK-690, TK-790, and TK-890 are versatile commercial FM radios, that are easily…
Key Features: Prusa Mini & Bambu Lab A1 Mini both Build plate Available!! <040126> adds shape modification. 1. Modified Heat Bed Top Cover : The original top cover of the Prusa Mini heat bed has been adjusted to accommodate the unique…
UPDATE: 02.02.2022 added Dia Label on Backside added 30mm and 60mm Version DE: Rohrbeschriftung für 30, 40, 50 oder 60mm Durchmesser mit einschiebbaren Label. Befestigung mit zwei Kabelbindern. Größe der Labels: 54x104mm EN: Pipe labeling…
Default Bambu Studio Settings, No Support Either Version Works Great
Verschiedene Schilder für diese Pflanzen: Fehlt etwas und hast kein Fusion? Schreibe mir, ich erstelle das Schild Akelei, Artischocke, Aubergine, Bärlauch, Bartnelke, Basilikum, Bataviasalat, Bechermalve, Beifuß, Blattsenf, Blumenkohl,…
Here an adapter for a smaller vacuumer - print in TPU. Alter the Step data to fit your vacuumer
Print instruction nozzle: 0.4 mm layer height: 0.2 mm filament: PETG The detail of template can be found from the creator's post: https://x.com/tyarinko/status/1885204408432288127
Notice! This is only compatible with the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. Buy Mega Python hardware kit You can now buy the Mega Python hardware kit from our partner…
UPDATE 11.05.2025 - Added support for Rapido UHF hotend. Minor fixes for part-cooling. I wanted a toolhead for CNC TAPv2 that also supports big hotend, has CPAP cooling and has clear access and visibility to the nozzle and hotend for…
![Rook 2020 MK2 & Scalable MK2 M5 Idler blocks [MK2]](https://media.printables.com/media/prints/1034193/images/7845167_bfd54e39-994f-4069-a3c6-44e2b49c3e21_a10bfcf2-06be-4ddd-98e9-dd113f4ce1a2/img_20241009_125921.jpg)
