220 modeli
I belive during this time it is important to educate ourselves to understand how somthing exists in such a complex biosphere thats why i would like to share my Lab glove Box that i designed myself and i hope that there is somebody out…
Wydruk około 2,08 €–2,54 € nettoWstępna wycena jednego wariantu
ARL-99 HELLDIVER From the Japanese multi-media franchise PATLABOR: The Mobile Police, the ARL-99 HELLDIVER is a Labor used by the Japanese Self-Defense Ground Forces, manufactured by Shinohara Heavy Industries. The OpenFigure3D version…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Se imprimen tres partes por separado: base, asa o manija y tapa. Luego de imprimirlas se debe pegar el asa o manija con la tapa. NO requiere soportes. Fácil para limpieza después de su uso.
Wydruk około 1,90 €–2,33 € nettoWstępna wycena jednego wariantu
Fuente de alimentación para laboratorios, realizada con un fuente de PC ATX. Medidas de la Fuente de alimentación. Alto: 85,50mm. Ancho: 150,50mm. Largo: 140,50mm. Hay un fichero stl. llamado CAJA_FUENTE_ATX_CON_3.EV.stl Este fichero…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena jednego wariantu
Aperture Laboratories key ring. Use a layer height of 0.15mm Add a change of color in layers: 16, 18, 19, 20. Color goes in this order: -Black -White -Blue -Orange Printed on a Prusa mk3s+
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
I put the Aperture Laboratories Logo on the Topper. This is made in Fusion 360.
Wydruk około 0,99 €–1,21 € nettoWstępna wycena jednego wariantu
(english below) Wandhalterung für Messkabel (BNC, Bananenstecker, Schuko-/Eurostecker, etc.) für Werkstatt und E-Labor mit Stauraum für Zubehör. Gedruckt werden kann das Modell aus verschiedenen festen Filamenten - ich habe PETG…
Wydruk około 19,90 €–24,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a ground glass stopper for the standard ground glass size 29/32 mm. It has a rounded head and a pin from which condensate can drip back. Please check the material beforehand to ensure it is suitable for the intended use. Depending…
Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu
Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 20h (input shaper enabled on MK4). Slicer settings: 0.2mm layer height, 4 perimeters, no supports, legs are recommended to print in vertical…
Wydruk około 6,29 €–7,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It is a laboratory table made of 20x20x1.5 aluminum profiles made of www.aluhobby.cz and connectors printed on a 3D printer. The table is equipped with 2 shelves 1000x500x19 mm. The table is used for mounting a small distillation column…
Wydruk około 5,44 €–6,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Recommended print settings: Material: PLA Layer Height: 0.20 Infill % : 15 Supports: No Print Orientation: Default as modeled Vectors and icons by SVG Repo
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
Are you annoyed that the perfect holder for you doesn't exist? Well, now you can assemble it yourself based on what you need. Not anything more, not anything less. This organizer is based on blocks you can slide into each other to form…
Print Z=0,2 perimeter=5 infill=50
Section 3: Catalogue of Significant Artifacts from Sector Ulysses, Site 23 3.7 Artifact VN-07-SU-23: Elaborately Carved Phallic Effigy Recovery Context: Artifact VN-07-SU-23 was recovered from Stratum III-b within Sector Ulysses, Site 23.…
Aperture Science Laboratories – We innovate science! I like the overall aesthetics of the Portal games a lot. So, to fill a blank spot on a wall, why not use an oversized Aperture Labs logo? The logo This print represents the Aperture…
RUS: Корпус для самодельного лабораторный блок питания, на основе модуля XY6020L и импульсного блока питания. Корпус спроектирован специально для печати на 3д принтере без поддержек. Список компонентов: Регулируемый модуль постоянного…
The paper is finally published and fully open-access! https://bsapubs.onlinelibrary.wiley.com/doi/10.1002/aps3.11562 We have only scratched the surface in developing 3D printable tools for COBLE. We began with microscope adapters and a…
cable slots 4 mm size W=30 x H=35 x L=164 mm best wall mounting with 3 x 20 mm countersunk screws. screw hole diameter 3.5 mm Print instructions print settings: PLA filament fill density 20% layer density 0.15 mm filament consumption:…
Remix of the great GAZ66 model of Pfelpensson, here with standard box used in different modifications for maintenance/repair workshops, laboratories, field kitchens, medical service and many other purposes. Model is hollow with holes in…
Portal Aperture Laboratories Keycap printed with White and Black
OVERVIEW This series of funnels is designed specifically with single use, or single material use in mind. The word ‘disposable’ does not conjure up positive thoughts in this day and age, however the intent is that they can be used for a…
This is a useful laboratory clamp to connect/mount pipes/rods with a diameter of max. 14mm You need to cut a M8 thread and use 2 x M8 screws with hat, (file included) There are two different versions. Both work well, v2 minimizes…
A stencil of the Aperture logo from the Portal games designed to be used with fabric paint for my Chell cosplay
PC ATX low power lab power supply. Printing without support in 0.20 or 0.15 For the screws: 4x M3 of 5mm 4x 20mm wood 6x m2 4x molded nuts Electronic part: Voltage Regulator :…
Here is my take on the laboratory rocker, which is a laboratory tool/device used in laboratories for mild to moderately aggressive biological and molecular mixing applications. Please, note that no model herein should be used for…
This is a remix of Laboratory centrifuge less than 5$ by dustkris . I changed it's orientation so I can use it with Vertical Support for Dremel by RobJP_ . Printed with PETG and 100% infill - better safe than sorry! I made an additional…
Stativklammer für 8 mm Stangen. Die Löcher zur Fixierung sind für kurze M4 Einpressmuttern konstruiert (z.B. Ruthex M4s).
Dialysis clamp for closing freaking dialysis tubes for protein purification. Print instructions So this is my first project ever. I tried to print a clamp in one piece that would work for unfolded dialysis tubes to save some material and…
I designed this extruder visualizer based off the logo for Aperture Labs from the video game Portal for my shiny new Prusa MK3. I didn't want to deal with support material, so it lays completely flat on the print bed. In order to glue the…
Surely you have a friend who likes the SCP Secret Laboratory game, this keychain is the perfect gift for him or her.
This model is compatible with the lego system.
A case for a buckconverter/regulated power supply with usb connector. There is also one magnet on either side for easy storing of for example a screwdriver. Supplies: SK60 SK120 DC Buck Boost Converter = Aliexpress Female Barrel…
print with the big side on ground
This model is compatible with the lego system.
250 mL Flask Holder This flask holder is meant to hold 250 mL flasks in place on an orbital shaker, assuming your shaker has screw holes to attach flask holders. I remixed this 250ml Conical Flask Holder , making the following changes to…
Dexter from Dexter's Laboratory Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
Power module https://www.aliexpress.com/item/1005005429587089.html Print without supports as showed in screenshot attached. Insert 3mm nuts into the holes in the case and fix cover with 3mm screw.
Holder for 13 vacutainer vials, easy print, no support needed
The ultimate STACKABLE laboratory organizer! Simple to print, customisable, .step and .shapr file incuded. Designed in Shapr3D. Print with PLA with 0% infill. Hope it works and helps! Happy printing, thanks for downloading
Hello, i dont provide the sphere because of the logo, just create a Geosphere - Radius 120mm. Remember! just in case, if you scale down your sphere and the atlas-stand think of the dimensions of the cup for the cards.... because he will…
A GL18 cap for laboratory test tubes and especially useful with the 4-port GL80 caps for Duran bottles. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 100 Filament: Generic ABS Category: Engineering
Versatile modular laboratory stand ... more info now only czech (in e-Mole magazine http://www.e-mole.cz/cislo/e-mole-c-7-8 ). English BOM (on image 3): Bitbeam Holder (3D printed) - 1x Vertical Rider (3D printed) - 1x Horizontal Rider…
When handling samples obtained from difficult (environmental) matrices (e.g. manure, dirty surface swabs, or water), Nucleic acid extraction and purification often becomes problematic. Scaling up during epidemics or environmental…
Dee Dee from Dexter's Laboratory
GRIDFINITY laboratory organizer. 8 types. Use also this or other gridfinity grid base. Check also my other design, stackable laboratory organizer . Hope it helps, and happy printing!
Laboratory hand-crank centrifuge. This tool can be used in emergencies or in the absence of electrical power.
I designed these two vial holders to maximize practicality and efficiency in the lab. I currently use them, and so do some of my colleagues. These holders can accommodate various standard vials: The larger holder can accommodate up to…
A wall mount for measuring and laboratory cables. The distance between the arms is 4 mm. Easy to print!
This is a nice little precision pump and controller combination. It can dispense 100 ml/min at 300 rpm. I set the output to 1 amp and use 16 micro steps (set dip switches to 16 and F09 to 160). I use working mode 3 (F01 to P03) and a low…
Dexter from Dexter's Laboratory
DC-DC regulated laboratory power supply and meter made with an standard adjustable power supply module.
Made this simple rack for a colleague in the lab who needed a multi-size holder for an experiment. The rack can hold : 1x 50mL falcon tube + 2x 15mL falcon tubes and 6x 1.5mL eppendorf tubes I printed mine in PETG for its better chemical…
Breadboard holder with laboratory plugs Breadboard:…
The Laboratory Mouse Monument is a monument in Novosibirsk's Akademgorodok, located in a park near the Institute of Cytology and Genetics (ICG) of the Siberian Branch of the Russian Academy of Sciences. The monument was unveiled on July…
This is a useful laboratory clamp to connect/mount pipes/rods with a diameter of max. 15mm You need to cut a M8 thread and use 2 x M8 screws with hat. (file included) here you can find the 90° version you might also be interested in my…
Stativplatte für 8 mm Stangen. Die Löcher zur Fixierung sind für kurze M4 Einpressmuttern konstruiert (z.B. Ruthex M4s). Die Platte ist 180 mm lang, damit sie auch auf den Prusa Mini passt. Das Model auf dem Foto wurde mit einer 0,6 mm…
Aperture Laboratories Plate that covers the USB port on the Creality K1.
PLA, infill 15% no support For one base, you need 21 sticks. Stick are printed horizontaly for endurence. Tolerance: holes are 3.3 mm width, stick have 3 mm
Vial or test tube holder for easy filling and mass readings. 4 different angles available for ease of use, various vial sizes, and convenience. Warning: Check MSDS of chosen print material and any chemicals present. Due to the layered…
UPDATE: I addet two knobs. Now ther are knobs markt with U, I, A and V. This is a small and save to build power supply for your electronic lap. It provides voltage and current regulation using an inexpensive LM2596 step down module. There…
HAWKINS NATIONAL LABORATORY SIGN Category: Signs & Logos
Hi All, The first project I built back in 1990 when I graduated with a BS in Comp-Eng was a power supply. It has served me well all these years, but it was limited. So I decided on a new 3D printed update. I like Sebr's power supply…
This model is compatible with the lego system.
Abstract: The implementation of automation has already had a considerable impact on chemical and pharmaceutical industrial laboratories. However, academic laboratories have often been more reluctant in adapting such a technology due to…
Organize your lab bench with this universal, multi-tier tube rack designed to fit a wide variety of laboratory tubes and vials. The stepped layout provides easy access and clear visibility for each row, making it perfect for busy lab…
Crossover to equip a tapered joint NS14 (Normschliff 14) with a glass thread GL14. I printed it quite often in PETG and all are still in use. No support needed if printed upright - therefore the conical shape between the two connections…
A few days ago, I reached for a sample in my lab and I ended up knocking over lots of vials in the process of trying to get them organised. Never again! These organisers are secure enough to keep your precious samples safe. I also…
Just a normal chemical laboratory glass tube, but with the screw.
Printed on an FDM printer with 3 perimeters and 20% infill. Printed in PETG, but other materials (PLA, ABS/ASA) should be fine too. Thanks to kl4appdrachen and Gimble for sharing their models!
El archivo STL viene en una escala algo pequeña, pero se puede escalar en tu laminador preferido si así deseas.
I like the original lab scoop , but it was a little short, and I found the print layers lead to powder getting stuck more than is ideal. Made it longer and made two versions, the closed-head one should prevent stuff getting stuck as much…
Trichterhalter für 8 mm Laborstativ. Die Löcher zur Fixierung sind für kurze M4 Einpressmuttern konstruiert (z.B. Ruthe
laboratory/microscope glass box for storing glass with tissue sample
Printed on an FDM printer with 4 wallcounts and 50% infill.
Hab die FreeCad Datei angehängt damit ihr auch Schnell eigene Schilder machen könnt.
Customized version of http://www.thingiverse.com/thing:1264391 24 Volts Power Supply BOM Printed Parts DPS3005 Voltage regulator from Aliexpress (…
This is a useful laboratory clamp to connect 4 pipes/rods with a diameter of max. 15mm You need to cut a M8 thread and use 2 x M8 screws with hat. (file included) here you can find the 90° version this is a simpel parallel version you…
An easy to print and assemble to be used directly, be for school project or at home. Takes a small place when in storage. Laboratory Burette Holder, including an clamp for test tubes. One of the must have in the home laboratory, school…
A stand for small objects in your laboratory. I designed it for test tubes, but it can be used for almost anything small and cylindrical. If you have more than one, you can easily link them together for a tidier bench. You will need some…
This is a lab drying rack with a metal backplate. Aimed to be sleek, made of stainless steel with plastic pegs. Inspired from systems for sale online from lab supply stores that sell for thousands of dollars. Print the pegs with 100%…
Это подставка для пробирок!
Convierte tu fuente de PC ATX a una de laboratorio variable Salidas de energia: 3.3 v 5.0 v 12 v Regulable 1.5 - 12v Se incluye diagrama para regulador de voltaje LM317 PARAMETROS DE IMPRESION Relleno: 40% Soportes: Si Material: PLA,…
In memory to the animals that contributed to science
This has two sets of turtle designs. I wanted something to add to an adventure that would be different than your usual animal haulers. This also has two seats that can be placed on the turtles for riding. Turtle number 1 also has a…
I use those brown 500ml glas lab bottles to store my tea. The original caps are made of black bakelite which breaks quite easily. So I made this cap which also takes the sealing insert of the original cap. I printed from PLA with 2 walls…
This model is an open laboratory stand for test tubes / laboratory tubes. It is designed for clear storage and easy handling of tubes directly on a lab bench, in a classroom, or in a home lab. The construction is a single compact piece…
Сontainer for laboratory glasses. They use magnets 5Х2.
Centrifuga a manovella per laboratorio, nessun attrezzo necessario per assemblaggio. Non necessita di corrente elettrica. Configurazione per 2 o 4 provette. Posizione provetta angolo di 45°. Dimensioni provette fino a 30 mm di diametro ed…
Geekvape Wenax S3 Stand - Magic Laboratory A Stand for Geekvape Wenax S3 e cigarette. Stylish, handy and exaclty your thing! It holdes your Geekvape Wenax S3 nice, but has some space for tollerances or possible sleeves you may put over…
Premise Sometimes glass is not the best material in laboratory. Specifically if you work with resins or materials which could destroy the glassware. For this reason polypropylene (PP) equipment can be used. This beaker serves mainly as a…
Stativklammer für 8 mm Stangen. Die Löcher zur Fixierung sind für kurze M4 Einpressmuttern konstruiert (z.B. Ruthex M4s).
⬛ No. 6 For all Ed Sheeran fans, I created a set of 3D printable abstractions to represent his discography. This can be used as a beverage coaster , or just for display . It is square like a CD or vinyl album sleeve. I changed and…
Küvetten-Ständer für das Labor. Stellen Sie ihre Küvetten schön sauber ab damit Sie beide Hände frei haben. Die Gitter Oben und Mitte sind die gleichen und können 2x gedruckt werden. Das Gitter Unten 1x Drucken Ich Empfehle 6 Beine zum…
MADE FOR MY SHOP. Category: Signs & Logos
There are 3 pieces, 2 of them are the covers for Park or Slick Honey grease tubs. The other is of the Radar Laboratories grease syringe. You can also use it for other grease gusn. Glue the Grease Syringe Fitting onto the tops with super…
Laboratory rockers are widely used throughout research in both physics, biology, and chemistry to mix and agitate liquid solutions and suspensions. One area of research that puts extra requirements on the rocker, is biofilm growth…
Robo Dexo 3000 (Robot from Dexter's Laboratory) Multi colour parts (MMU) Most of the parts are printed with PLA Deep Aluminium by PanTech Category: Sculptures
Assuming you have old laptop power bricks and/or Ryobi battery to spare. XYS3590 is affordable buck converter up to 36V/5.1A -80W This box housing two laptop power bricks 16V&19.5V = 36.5V/4.5A connected serial. The power bricks' plastic…
Voici une alimentation de laboratoire réalisée à partir d’une vieille alimentation ATX de PC, remise au goût du jour grâce à un boîtier imprimé en 3D et quelques ajouts pratiques. Au menu : sorties 12V, 5V bien accessibles, 2 double USB…
