3359 modeli
This model is a remix of my previous bullseye spirit level stand that used an alignment stick. Now to get the path tight, we will use a laser! This print consists of the base and 3 thumb screws for leveling adjustment. A Ryobi Laser Cube…
Standoff clamp to securely hold material for laser cutter/engraver and prevent flashback. Designed for Epilog Pro Laser Bed. May work on other honeycomb. Tapered from 5mm to 7.5mm. Holds material to be engraved and/or cut in 3mm (1/8") or…
This is an Open Source Version of the famous & expensive “Qlocktwo” clock. It works with any ESP8266 and WS2812 LEDs The entire project is meant to be made with a laser cutter. You need the following materials: 4 mm Plywood for the frame,…
Foldable legs for the Ortur Laser Master 3. Similar dimensions of the set sold by Ortur for $80. These have the option for reusing the original feet as well. Use a 25mm M5 bolt with M5 hex nut for securing legs to bracket. Use 8mm M4 bolt…
First off, attribution: This is a remix of the laser bed corner inserts by morpha on thingiverse. Found here: https://www.thingiverse.com/thing:4857543 During my testing, I figured out the true 0,0 of the Snapmaker A350 (at least mine) is…
This was designed as a greetings card but also suitable as a decoration or fridge magnet. The photo shows it printed using a generic white PLA bought from the Prusa shop.
Created a holder for my CV Laser Module based on the Creality Ender-3 S1 Simple Tool Changer by Jón Schone - https://properprinting.pro Remix published with permissions:…
My take on a laser goniometer for measuring the edge angles on your knives. It's made to hold a pen style laser pointer with a diameter of 10mm.
gabarit d'angle pour laser, positionnable facilement grâce a des aimants.
This is the upper tray for a small laser printer (see photos). This tray will probably work with the following laser printers : HP P1102 P1102w P1102s M1536 P1005 P1006 P1007 P1008 P1106 P1108 P1107 This is not an exact copy, of course,…
This is a mounting system to hold the XTool D1 laser in place while printing. It has one large hole in the center for the leg to fit into, then 4 holes for screws to mount to the surface. For best results, use one on each of the 4 feet.
HEADS UP: A new version compatible with LowRider v4 is now available. Get it here . Here's a helpful video I made about this: This is an adaptation of a Maxwell Kinematic coupling . You can read about that here:…
Note: You still have to clean the lens regularly before the laser. There is definitely smoke building up there! Update Feb 2021 V 2.2 better Airflow ------------------------------------------------------------------- Hier habe ich für…
Simple low profile laser bed hold-down pin for small 6mm holes on xTool honeycomb laser bed. Thanks to the top fins being just 2mm high, there should be no interference with the laser head. Print in white colored filament to minimize…
Complex model, with mechanical parts beyond the printed ones. No programming skills needed, basic knowledge about Arduino desirable. As designed, the cutter is quite large (can be downsized, of course), and the frame rigidity using…
How to use: Place your collimator on the jig. Turn on the laser and point it at a distant wall. Rotate the collimator and observe the laser spot. It should ideally not move as the collimator rotates. Adjust the screws on the collimator as…
A carriage for the laser module for the Sainsmart Genmitsu 3018 CNC router. Slides on to the front of the motor bracket and tightens against it. Includes air-assist conduit. I use a board on the bed that extends at the front by 40mm to…
Mount and bracket allowing you to use a cheap laser crosshair with your laser cutter (in my case a Creality Falcon 10w) to aid in setting up parts for engraving and cutting, this is especially useful when doing repetitive work, it also…
This is a side mount for the Creality laser kit. It consists of two parts: Control Box Mount Power Adapter Mount This is designed with the following key points in mind: print with minimal support rails are not to tight, for easier…
Soutien le câble de l'Ortur Aufero 2, pour le laser LU2-4-SF Rajout support tuyau air assist (Laser Ortur LU2-4 SF) pour aller avec https://www.printables.com/fr/model/220442-air-assist-adapter-for-ortur-laser ou…
General This grid pattern is designed to act as a seperator between the wasteboard and the cutting material while cutting with Diode Lasers . Spacing the workpiece from the wasteboard should give a cleaner cut, especially on the backside…
With certain models of TwoTrees diode laser rigs, including TTS-25 (2.5W), TTS-55 (5.5W), TTS-10, a 3D-printed holder comes with it, that holds the nice “Focus Assist Metal Column.” In my case the hole was too small (too tight for the…
This parts are from the founder of LaserPecker and LaserPecker 2, Yu Yu shared it on his Github Page and allowed me to share it here. The Printed Parts halt to support conical parts on the 3rd Axis of the LaserPecker2.
Check your material thickness quickly with this easy mod. gauge is in metric units. Cut from 5mm acrylic or wood Text can be cut or engraved. File is provided in .ai .svg and .pdf format
This is an air assist nozzle for the Ortur LU2-10A. It features 4 very strong neodymium magnets 5mm in diameter by 5mm in thickness and a 3/32" od brass tube. The magnets protrude just about the surface enough to fit into the impressions…
Laser Bracket for sprite extruder. Made for Creality laser engraver
Upgrade your Nerf blaster with this custom-designed laser pointer holder! This 3D printable accessory securely mounts onto the standard tactical rail found on many Nerf guns and is engineered to fit common budget store laser pointers…
Outlet elbow for smoke extraction laser Creality falcon2 Pro, fit on fan. Design for better air flow. Petg, 0.4 or 0.6mm nozzel, layer 0.2-0.32mm, supports
This is a simple organizer and toolholder for the tools and accessories that ship with an Elegoo Phecda laser engraver. Two screws are needed to mount the toolholder. There is a place for the screwdriver, three hex keys, wrench, micro SD…
You need a square nut M3 and an Allen screw M3x6mm
EN : Creation of a new handle for this Gundam light saber who was missing during the montage, the best profile is 0.2mm to be less precise because after many attempt, more precise we are and less result we get so the best is 0.2mm with…
Pièce pour extension de l'espace du laser pour la K40
It can be printed from any material with almost any layer height.
A 3x1 Gridfinity container for the Bosch GLM40 laser distance measuring device.
Slide on Laserpointer attachment for the Bugasalt V3 the attachment is slightly angled so that the laser is accurate at the optimal shooting distance at about 45cm - 1m this attachment is made for a cheap rechargeable cat toy laserpointer…
Remixed the rugged box by @Whity / @Yanev to fit a Bosch Zamo. The box is smaller than the original packaging and of course more rugged. It has a little compartment for things. Printed in PETG. You will need 6 pieces M3 x 30 screws for…
This is a replacement hatch for newer style Amiga mouse's laser upgrade kit. It uses clip mechanism to secure the attachment. I used ASA filament and variable layer height with this print.
printed with ortur laser master 3 10W Laser For engraving Speed 14000 mm/m Power 50% For cutting Speed 270 mm/m Power 85% Printable doesn't allowing .lbrn2 files so download the text file and change the .txt to .lbrn2
Model is design for Ortur Laser Master 3 LE (note: not tested with Ortur LM 3) For the need to raise the base of the laser above the surface by 50 mm (f.e. rotary fixture). The tool assumes that rubber pads are glued to the base of the…
The storage box with an openable sliding lid is for the Makita LD030P laser distance meter; it has a lower compartment for the batteries.
The PLH3D-2W is nice, though the included laser holder wasn't really fitting my needs. I generated a new version that has multiple mount points and a hole for the extruder indicator gear seen in the photo.
I designed this quickly in prusa slicer 2.6 with some random shapes and options because I can't stop thinking about the laser engraver kit that I have on the way for my ender 3 pro and I know I am going to need a fixture to engrave…
Mount to stabilize the galvo-style LaserPecker 1 on a drill press Jacob's chuck. Easier to manage focal distance and avoid bumping the lightweight tripod it ships with. Optional “flex pad” model can be printed in TPU or another material…
The HP LaserJet MFP M140w always feeds the paper at an angle and the printouts become unusable. That's why I designed a paper guide. Simply attach the two brackets. The paper is no longer fed at an angle. The paper guide is needed twice.…
Plastic style: To be printed in a non-brittle, non-warping material, PETG and PLA+ are perfect. On a good 3D printer with a good precision ... A millimeter must be a millimeter ! Print your tabs, along with the nut and bolt. Don't rush;…
I recently bought a UNI-T model LM100 laser distance meter. Unfortunately, this meter is not equipped with a thread for fixing it to a tripod. So I designed a suitable holder with 1/4" UNC thread which allows you to mount this meter on…
Supports needed and magnet 2x20x5 mm and glue. Infill 0.15, speed 0.2. Design model on which secound year carpenter student Ondřej Brzák
Printer: Prusa Mk3s i3 LayerHeight: 0.32 Shells:2 BottomLayers:3 TopLayers:4 Infill: 5% Infill Pattern: Grid Speed: 60 mm/s
A simple Gridfinity bin for the Bosch Quigo Green Laser level cube. I found that other models for the Quigo (non Green) model do not fit. So I designed my own with slightly more space to accomodate the Quigo Green. The size of the cutout…
A box to store consumables for "Gweike M-series" fiber laser head. Up to 19: PW-D20-3mm lenses 1152101 Spring sealing rings WSXLH-G205-01 Two ceramic rings D20-M10 One Inox gauge L65N Print with organic supports on the plate only, with 4…
All existing laser mounts need at least one screw to mount the laser to the extruder. This solution only needs the following additional parts to enable a toolless mounting: 4x M3x8 screw 4x 8x3mm disc magnet Hint: Be sure to remove…
I wanted to have a mini laser rangefinder to carry along with my Zeiss Ikon Nettar and I didn't want to use the included mini strap, so I designed it to hold it and use it at the same time to properly focus the camera. My design was based…
szczelinomierz 11 - 11mm 12-12mm do 20mm od 1 do 10 na profilu
This is not an original idea, but the model is mine. It is a business card holder for holding a blank aluminum business card in position for laser engraving. In this case, it holds it firmly in the slots of the Ortur laser engraving…
Used for both practical and educational purposes, this gauge block can be used to get a close starting point to further adjust focal length for both surface and depth cuts for three different lenses. The three lenses are: 1.5 inch or 38.1…
This is a simple shelf to organize the supplies needed to clean the optics of laser cutters and engravers, including lens cleaning solution, cotton swabs and alcohol prep wipes. Alcohol prep wipes may not be compatible with some coated…
A simple and easy to print cover to protect the pins of the adapters (e.g. the wheel adapter ) for the Bosch Zamo laser measure tool .
Made a model to fit the Falcon 2 22w laser from Creality with a red crossline laser. I found the 12.5mm red crossline laser from Temu. Uses an M3 x 10mm screw for secure fit of the 12.5mm crosslaser. Remember to choose your offset in your…
This is a stand I made for a laser cut easter sign. It's about 6cm 3cm 1.2 cm. It can be used for plywood of 3.5 mm. The plywood I used was about 20cm * 12cm so the weight of the plywood may be an issue.
repair side for a cardboard reel filament . for laser DFX file and for FDM . size 210 OD ID 40mm thick 4mm
This replaces the Rendyr Optic laser filter and adds a port for connection to a shop vac or dust extractor. There are no filter parts inside. The port was sized to fit a Dust Right flex hose from Rockler. The three components need to be…
print four put under laser cutter (if you're keeping yours ontop of your prusa enclosure like we are) job done
The model is an automated cat laser toy that moves randomly. There are not special printing instructions and no need for supports
Jigs for laser engraver with 109mm base dimensions. One model is for hexagon tile and the other two models work with keychain fob's.
Motivation Sometimes I want to recenter workpieces on my galvo laser's blue light so that I can quickly swap them out and rerun the laser operation from the controller instead of reframing and sending a new job from the laser software. I…
Be one of ten who leave a Like at Printables and support me with it :) The new version 04 allows to use the original holder of the laser module. For the assembly, the extruder must be disassembled by means of 4 screws and additionally 2…
3D print or lasercut pegboard and insert base. you can also use the insert baseplates as universal mount to glue or screw on already existing original tool holders like bit holders, drill sets and stuff. the insert base is designed for a…
Hi, The print crimp the honeycomb (see on picture). This system is very stable on a Sculpfun honeycomb. Printed in PETG ----- Salut, le Système pince la doublure du nid d'abeille (voir sur l'image). Ce système est très stable sur un nid…
these are slight adjustments to make them a little stronger and variants to have taller and longer arms.
UPDATE17.01.2022 Found another Template including front, back and top. Its only a PDF so its not simply ready to print or cut out, but I thought I add it as it could be useful to some of you. !!WARNING!! if you plan to do this with a…
A very simple too for aligning your laser head (40mm x 40mm square diode laser modules) to your workpiece. It allows you to quickly establish the origin at the corners of your material without having to test fire your laser. Just butt the…
I got a request for a 308 Blaser ammo box of the new design. The spacing is 50pcs/12,60x75,50mm between the insert top and bottom. Please read the size before printing. I made a o-ring to fit the lid but it's made for 2mm o-ring string if…
I've tried the others but was not satisfied with them so I designed these. Been working great for a couple months now with great holding power.
Low Profile Honeycomb Pins for Laser Engravers by RebelTaz I have seen these hold down pins for laser engraver honeycomb beds everywhere, but the problem with all of them is that they stick up too far to be useful with "fixed focus"…
General Update how to support different Sculfun products / configurations: If your HoneyComb Board used is NOT the same size like mine: exactly 405 mm ( X-Axis ) by 405 mm ( Y-Axis ) mm we need to adopt the distancers. Measures and sizes…
This clearance test shown in the video above was originally intended to be a kerf test (as can be seen on the labelling) for laser cutters and engravers. The tab dimensions are 15mm x 3mm. The slot dimensions incrementally change from…
This is a remix, but is not in printables, its in https://www.thingiverse.com/thing:1722395 Connector were added to connect the wings, and the head was modified to have a more easy entry. Made on an Artillery Hornet. Layerhight 0.2 and…
This is a jig to engrave up to 10 pens with your laser. I also add a jpeg to use as background for your laser software.
The lift fits on a DeWalt laser DCE089D1G. The laser beam can reach a height of 32 cm from the ground. The lift itself c
These clip standoffs fit snuggly in the honeycomb tray of my Nova 24/60 Thunder Laser. They lift the material .125" off the tray, the clips hold it securely in place while the support standoffs are for supporting the center span, if…
A clamp for holding down wood or other material on the honeycomb bed for an Atomstack laser cutter. It may work on other beds but it was specifically designed for the Atomstack bed and fits very snugly. You can scale it down slightly if…
Laser visualizer of sound waves Sound propagates as mechanical waves through air molecules. This device contains a rubber membrane that vibrates in response to sound waves. On the membrane is a small mirror, onto which a laser is…
Laser cut from 3.1mm poplar plywood, the sign and arm in mine are 3d printed though im sure you could do them using the laser cutter as well.
The weak hinge is now fixed uploaded 28 February see picture. I got a request for a .308 ammo box. The spacing is 20pcs/12,6x75,24mm between the insert top and bottom. I made 3 different versions/logo. Let me know if you want another…
Here's my attempt at a laser pistol from Fallout. I scaled it up to 200%. You might want to sand the connection points so they fit if your tolerances aren't perfect. Here’s my assembly and painting video for this…
I used these files to have 3mm plexi cut for the enclosure on my Flashforge Adventurer 5m using the specs provided on the Flashforge DIY Enclosure Wiki page. These are not intended to be printable, but should be used for cutting your own…
There are times when thin materials need to be held down to the laser bed to maintain flatness. A clip is often used to hold down the work. The WeCreat Vision does not use a honeycomb bed but rather uses knife edge slats running front to…
A Collection of Rubber Stamp handles for either 3D Printing or Laser Cutting. The 3D Printed Version was Printed in Black PLA+. You can also print the included Cover/Caps to keep stamp ink from getting all over the place. The Laser Cut…
Motivation A while ago I published a pretty cool bottle opener gun which did win the Bottle Opener Contest. It Features accessory rails to mount lasers, flashlights or sights. However I was not able to find commercially available…
YOUTUBE video showing the use of this 3d scanning frame: Improved LARGE version of my scanning frame v2 which is working great using RaptorX in parallel laser scanning mode. Motivation for designing this 3d scanning frame: Object can be…
This is my design for a CNC Laser for more information you can visit My-Laser CNC Oficial Page Still in development i'm building two prototypes one for me and one for a client. If i make any changes i post here, but please keep in mind…
Openbuilds 2040 V-Slot The plates are 8 mm thick and are designed for 2040 v-rail. Y-Plates: One of the plates is designed for a Nema 17 stepper motor and the other accommodates a 16 mm f625zz flanged bearing. X-Plates: The back plate is…
This box is designed to be laser cut from 3mm plywood - it is simply glued together, with one side going on last BEFORE the top lid; you can't attach the lid after it is all glued. Dimensions: 116 x 53 x 50 // W x D x H I've included a…
Drag Chain for the Longer Ray5 laser engraver 10W (probably would fit for all the models) You'll need 26 chain links for the X axis and 33 for the Y-axis (Dont know if all units have the same cable lengths). The chain can be printed in…
An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model,…
Hier mal mein Wichtel Set. Alle Dateien sind selbst gezeichnet und sollen auch bitte nur privat genutzt werden. Die Laserteile kann sich jeder selbst skalieren. Ich habe auch svg mit nur 2 Farben genommen, das funktioniert auf MrBeam und…
Credit to IOK / 이성인 https://blog.naver.com/leesi11 Allowed me to post here for others to find. Jig which covers the LaserPecker Stand compatible with the L1 Pro Autostand and LP2 Stand. Print plate upside down to avoid using supports for…
A simple mod for the Slimline PlayStation 2 that protects your discs from getting scratched by the lasers ribbon cable. Support for both laser types! The mod should work on any PS2 Slim model in theory but confirmed to work on 70004 &…
Plaque for the Orbital Laser stratagem UPDATE 3/4/24: Added STL files UPDATE 3/5/2024: Added V2 files that includes some fixes for misc. symmetry and centering of objects, as well as updates to the stratagem model itself to be more…
![[REMIX] Rugged box for Bosch Zamo Laser Measue](https://media.printables.com/media/prints/663548/images/5225882_39d18197-5171-412f-9129-d04d28ebab76_f8887cff-ee0e-431b-958d-4d0c448cf769/pxl_20231129_113306422.jpg)
