Wyniki wyszukiwania: lege

Sortowanie

1470 modeli

P
PrintablesDanielAlex

Star Wars TIE Defender (Canon/Legends Versions)

Replica of the TIE/d Defender from Star Wars. It comes in two versions. The canon version is based on its depiction in Rebels, the other version is based on its (most common) depiction in Legends. The only difference between the canon and…

Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu

Pobrania
935
Polubienia
150
Ocena
5
P
PrintablesJakeOfOz

Dad legend coaster

Recreated the original to be scaled down to coaster size (the file is 200 x 200mm, just scale X and Y to preferred size). The text scales better with this model, doesn't leave gaps any more. There is a dad joke at the bottom. Use the…

Wydruk około 8,38 €–10,24 € nettoWstępna wycena jednego wariantu

Pobrania
399
Polubienia
49
Ocena
5
P
PrintablesKingpinFelix

Legend of Zelda Master Sword Grip (Remix)

Printed and tested on 29th November 2023. Fits perfectly and works really well. Recommend printing with a high density of 30% or more for a nice weighted feel but also for rigidity. Good luck! :D

Wydruk około 4,41 €–5,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
145
Polubienia
18
Ocena
5
P
PrintablesPopandsicle

Legend of Zelda Master Sword (BOTW) (TOTK) (Full Scale)

This design is my attempt at creating the ultimate 3D Printable BOTW Master Sword. This Master Sword was meticulously designed in Fusion 360 so that all parts can be printed without support material, and the final piece can be assembled…

Pobrania
33 751
Polubienia
9304
Ocena
4,88
P
PrintablesPopandsicle

Legend of Zelda Master Sword Scabbard (BOTW) (TOTK) (Full Scale)

It's been exactly 5 months since I published my first 3D print design. Back in August, I uploaded my design for a fully 3D printed Master Sword from The Legend of Zelda: Breath of the Wild. I had been working on that design on and off for…

Pobrania
8108
Polubienia
2571
Ocena
4,97
Pobrania
5059
Polubienia
1089
Ocena
5
P
PrintablesCrazy3D

Verlegehilfe Begrenzungsdraht Mähroboter - tool for mower boundary wire

Boundary wire install tool robot mower - Verlegehilfe Begrenzungsdraht Mähroboter If you like it --> press like it :-) Tool to install the boundary wire for your lawnmower into a groove. Groove can be done with the tool in my other models…

Pobrania
3306
Polubienia
389
Ocena
4,72
P
PrintablesEon3D

Tung Tung Tung Sahur – Meme Legend

From the depths of meme brainrot, the legendary sahur drummer is finally printable! Tung Tung Tung Sahur brings chaos, tradition, and pure internet energy into one glorious, unhinged figure. Whether you know him from the streets or the…

Pobrania
3300
Polubienia
117
Ocena
4,17

Ahri KDA - League of Legends - 25cm tall model

K/DA exploded into the music scene with their hit song “POP/STARS.” Fans of K/DA can’t get enough of their unconventional flair, from the trademark tails (which fans suspect are real) to otherworldly decor in their studio. “Our songs are…

Pobrania
3207
Polubienia
624
Ocena
4,9
P
PrintablesLink

Zelda Tears of the Kingdom Tears of the Kingdom Characters: Link, Zelda, Zoani Zelda, Purah. The Legend of Zelda. Zelda Zelda Zelda Zelda TOTK TOTK TOTK The Legend of Zelda ZELDA ZELDA ZELDA TOTK Tears of the Kingdom

Link, Purah, and two Zeldas. They’re definitely going to need supports, and I also recommend scaling them up nice and big before slicing, assuming you want the fine details. Have fun with these, and if you want to see more, give a like…

Pobrania
3176
Polubienia
314
Ocena
5

KDA Akali - League of Legends - 30 cm model.

Akali makes appearances next to other street performers in cities she is visiting. Combining mixed martial arts and the beat of her own rap lyrics, she delights audiences with her bold lyrical rap and punk ninja style. She started…

Pobrania
3051
Polubienia
464
Ocena
5
P
PrintablesPopandsicle

Legend of Zelda Master Sword and Scabbard Wall Mount Display (BOTW) (TOTK) (Full Scale)

Prologue: In the 10 or so months since I posted my Master Sword design, I've had countless requests for some sort of wall mount or display stand design. There's even been several designers that have published their own displays for the…

Pobrania
2969
Polubienia
1301
Ocena
5
P
PrintablesDuker

Ancient Pokéball (V3.1) from Pokémon Legends: Arceus

Preview of completed ball: https://imgur.com/gallery/P5iGYgX ~Important update 2022-01-29~ The bottom hinge for the split version was erroneous, uploaded a new version, name ending with “(fixed)”. Also added optional stuff, a ‘Heavy Ball’…

Pobrania
2521
Polubienia
565
Ocena
4,87
P
PrintablesLink

Link: The Legend of Zelda: Zelda Link

This is a model of Link from The Legend of Zelda: Ocarina of Time. You will have to scale, rotate, support and slice the model per your preference. I uploaded this model originally as a very inexperienced modeler, and the model had errors…

Pobrania
2470
Polubienia
254
Ocena
4,4
P
PrintablesLink

Master Sword (Master Sword) (Zelda Zelda Zelda Master Sword) REMIX POPANDSICLE Master Sword Zelda (Zelda Master Sword) LEGEND OF ZELDA MASTER SWORD (Master Sword)

Popandsicle’s Master Sword is totally genius. The sword prints without supports, doesn’t require glue, and looks amazing. Plus, it’s free! However, the original model is designed so that all pieces fit on a Prusa Mini. This is really cool…

Pobrania
2462
Polubienia
470
Ocena
5
P
PrintablesEmethian

RE-45 AutoPistol (Titanfall/Apex Legends)

The RE-45 is a staple of the Frontier war, initial appearing in the hands of IMC soldiers as a effective suppressent for local dissent and providing cover fire for advances. Eventually it made it into the hands of Militia forces and again…

Pobrania
2095
Polubienia
594
Ocena
4,25
P
PrintablesRyan1705

Wingman | Apex Legends [Easy Print] w/ Stand

Build Videos P1: https://www.youtube.com/watch?v=nPZfvoYlkRc P2: https://www.youtube.com/watch?v=hSb7K_NrlCI Hey everyone! This is my model of the Wingman from Apex Legends, it's pretty accurate, I've made a few videos on how I designed…

Pobrania
2059
Polubienia
641
Ocena
5
P
PrintablesIanHoolihan

Hyrule Triforce Wingcrest - Legend of Zelda

Wall-mounted Hylian Wingcrest from the Legend of Zelda series. This was modeled by me based on a 2D image of the crest. The model includes a slot on the back so that it can be hung on a wall by a single nail.

Pobrania
2058
Polubienia
390
Ocena
5
P
PrintablesMiniWorld3D

Temple of Time (2023) - The Legend of Zelda

⛪ The Temple of Time ⏳ We have updated & improved this original model to have better detail & to make it easier to print. Watch how it was done on YouTube ! The original base model was created for MMU by MiniWorld3D collaborator artist…

Pobrania
2050
Polubienia
527
Ocena
5
P
Printablesfasteddy

Hylian Shield (From Legend of Zelda - Breath of the Wild)

This is a model of the Hylian Shield from The Legend of Zelda: Breath of the Wild made specifically for multi-extruder printers. Please be aware that the colourized version of this model was not designed to be printed in pieces on a…

Pobrania
1970
Polubienia
428
Ocena
5
P
Printableswindi

Mallet-Winding-Machine / Schlegel-Wickelmaschine

The mallet winding machine was developed and built for me by Mr. Fabian Buschulte as part of a student project at Reutlingen University. Apart from a few roller bearings, thread inserts and screws, as well as the purchased counter, it…

Pobrania
1786
Polubienia
74
Ocena
4,75
P
Printablesnerdyviews

Legend of Zelda Hylian Shield Keychain

Hylian shield keychain from the Legend of Zelda! This one involves multiple filament color changes so I have added a gcode file or you can reference the photo.

Pobrania
1749
Polubienia
395
Ocena
5
P
Printableshervingarciaa

Miss Fortune League of Legends STL for 3d printing by CG Pyro collectibles fanarts customs figures

Miss Fortune League of Legends STL for 3d printing by CG Pyro collectibles fanarts customs figures Sarah Fortune, captain of Aguasturbias famous for her looks but feared for her brutality, is a stern figure among the port city's hardened…

Pobrania
1745
Polubienia
301
Ocena
4
P
PrintablesLink

Zelda Zelda Zelda The Legend Of Zelda: Breath of the Wild BOTW BOTW Breath of the Wild Breath of the Wild ZELDA ZELDA ZELDA ZELDA ZELDA ZELDA BOTW BOTW ZELDA ZELDA Breath of the Wild Characters

Includes: Link (Not the archery pose, don’t have that one. Sorry!) Default Link (Unequipped) Zelda Ceremonial Zelda Mipha Daruk Revali Urbosa Sidon Yunobo Teba Riju Paya Purah Kass All with or without a platform! They’re definitely going…

Pobrania
1726
Polubienia
210
Ocena
4,5
P
Printableshotwire12

League of Legends Poro

Ripped from Volibear's model. He juggles 'em :) EDIT: JPfeil made a remix with the internal geometry fixed and a better looking exterior, go check it out. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes…

Pobrania
1624
Polubienia
124
Ocena
4,8
P
PrintablesPeter Farell

Link Statue : Legend of Zelda

Link Statue - Trophy: Legend of Zelda USE Linkandshield files. They are fixed. Keeping old ones up just in case

Pobrania
1585
Polubienia
273
Ocena
3,75
P
PrintablesTyler

Corrupted Legend of Zelda Master Sword (TOTK) (Full Scale)

This remix is a mashup of @Popandsicle's excellent BOTW Master Sword Hilt and @xenonjibei's TOTK Corrupted Blade! All credit for the designs goes to each of them. If you have already printed @Popandsicle's Master Sword then you should be…

Pobrania
1451
Polubienia
325
Ocena
5
P
PrintablesPeter Farell

The Legend of Zelda: Majora's Mask

The Legend of Zelda: Majora's Mask The widest section of the inner dimensions of the hollowed out side of the mask is slightly larger than the average mans face. If you have a large head you may need to enlarge it which would require you…

Pobrania
1430
Polubienia
332
Ocena
0
P
Printablesiczfirz

Lord of Darkness the Legend Support Free Remix

Subscribe to find out more support free 4K Time-lapse video: Subscribe Now! http://www.youtube.com/iczfirz https://youtu.be/qtqErycp1b8 Addiction to 3D Printing? Watch these time-lapse! https://youtu.be/-ZsXFX6hjXk…

Pobrania
1412
Polubienia
283
Ocena
5
P
PrintablesAdam L

Legend of Zelda : Hyrrule / Triforce Crest

Please download the original author's model here: https://www.printables.com/model/321247-hyrule-triforce-wingcrest-legend-of-zelda , which I had honestly forgotten that I had not made. My deepest apologies to the original author, Ian.…

Pobrania
1412
Polubienia
197
Ocena
5
P
PrintablesK7162

Apex Legends Nessie Figure

A hidden character from Apex Legends, now 3D printable. You might need to scale it up a bit.

Pobrania
1392
Polubienia
158
Ocena
4,8
P

Apex Legends | Raven's Bite (Bloodhound Heirloom)

This is our version of the Raven's Bite Heirloom from Apex Legends. The file was designed to print on our Prusa Mini, which has a 7"x7"x7" build volume. This is the whole version of the model. If you wish to print the cut-up version as…

Pobrania
1392
Polubienia
211
Ocena
5

Darkness bust – Legend (1985)

If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.

Pobrania
1340
Polubienia
296
Ocena
5

Koraidon - Gen 9 Legendary

Ah, Gen 9 is here! With Scarlet and Violet come two new legendaries (so far...) which are just awesome! Here is Koraidon

Pobrania
1309
Polubienia
132
Ocena
4,6
P
PrintablesK7162

Apex Legends Pathfinder Figure

Model of Pathfinder from Apex, ripped from game files. Lyche Slicer warned me about holes in the model and my print ended up without an arm so your mileage may vary.

Pobrania
1280
Polubienia
169
Ocena
5
P
Printablesfasteddy

Navi (From Legend of Zelda)

Hey! Listen! It's Navi from The Legend of Zelda: Ocarina of Time in hanging ornament form. It's perfect for the rear-view mirror, Christmas tree, or even catching in a bottle in case you find yourself running low on hearts. Print…

Pobrania
1246
Polubienia
407
Ocena
5
P
Printableserikringwalters

Pokemon Legends Arceus Pokeball - Hisui Poké Ball with Hinge & Lock

Hisuian Poké Ball from Pokemon Legends Arceus! NOTE: A 3D Pen is recommended for assembly. My recommendation is MYNT3D Professional Printing 3D Pen with OLED Display. Please read Assembly Instructions before assembling. This Poké Ball is…

Pobrania
1238
Polubienia
255
Ocena
5

The Legend of Zelda: Breath of the Wild Treasure Chest Switch Cartridge holder

This is an MMU print of the treasure chest from Breath of the Wild. It's printed in several parts for the best quality but that does mean some assembly required. A little bit of super glue is all you need but most of the parts can just…

Pobrania
1228
Polubienia
386
Ocena
5
P
PrintablesLink

The Legend of Zelda Goddess Statue ZELDA ZELDA ZELDA ZELDA ZELDA TOTK TOTK GODDESS STATUE ZELDA Tears of the Kingdom ZELDA ZELDA ZELDA TOTK TOTK

The goddess statue from Tears of the Kingdom. (From the Temple of Time.) Prints without supports. If you have any questions, complaints, thoughts or requests, let me know! If you need help with anything I’ll help you as well as I can.…

Pobrania
1222
Polubienia
206
Ocena
5
P
PrintablesCG Muffin
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
1222
Polubienia
255
Ocena
5
P
PrintablesBaconcrew09

Link figure (Legend of Zelda Link's awakening.)

Remix of The Legend of Zelda Links Awakening - Link. I fixed the hair to make it look more like Link from the game. It's a bit rough on top but a little sanding or filing should take care of it. -Baconcrew09

Pobrania
1200
Polubienia
114
Ocena
5
P
PrintablesLorga3D

Sheikah Slate: The Legend of Zelda botw

sheikah slate, easy to print

Pobrania
1076
Polubienia
154
Ocena
5
P
Printablespsybertech

Legend of Zelda Rupee & Display Stands

This Rupee by default is about 1" wide, just under 2" tall and ½" thick. You can scale it if you wish. I used 100% for the Silver, Gold and “Diamond” ones and then 75% scale for the basic colors (approx. 20mm x 26mm x 10mm). The display…

Pobrania
1074
Polubienia
320
Ocena
4,81
P
PrintablesZac German

Pokeball (Legends:Arceus)

Modeled a pretty solid Pokeball from Legends Arceus. Print in place. Latch system fits about as good as I could have hoped. Bottom inside is lifted so something could sit nicely in there as an ornament. Included the Stl of the solid…

Pobrania
1071
Polubienia
197
Ocena
4,67
P
PrintablesBAD Gumby

Chest of Legends - Sea of Thieves

The Chest of Legends from Sea of Thieves. Printing: For best print results, print the emblem and chest separate. I have provided the chest without the emblem (chest-of-legends-no-emblem.stl) and standalone emblem…

Pobrania
1028
Polubienia
161
Ocena
4,67
P
PrintablesIkarusRQ

The Legend of Zelda: Tears of the Kingdom Decayed Master Sword

Modified Rawolr's Master Sword files from thingiverse to turn it into the one from the Tears of the Kingdom trailer, most files are the exact same as the non-metal rod version of the original, only changes are Blade_1, Blade_2 and Blade_3…

Pobrania
993
Polubienia
299
Ocena
5
P
PrintablesAmuseables

Apex Legends Loot Tick

Wanna cool robot that spins and is separated into different colours so you don't have to rage quit when trying to paint it? Do ya like Apex Legends? Do you like robots? My cousin does so I made this print for him. Notes: Be careful when…

Pobrania
978
Polubienia
245
Ocena
4
P
PrintablesKen Mills

Legend of Zelda: Tears of the Kingdom

Add a filament swap for the details to add contrast.

Pobrania
964
Polubienia
304
Ocena
5

Master Sword (Full Size) - Legend of Zelda

Edit: It turns out some of these files weren't slicing correctly in Slic3r, so I've corrected the issues and updated the files. :) It's dangerous to go alone, take this: https://youtu.be/HRMcRFcPFsU This is a full size, fully 3D printed…

Pobrania
960
Polubienia
274
Ocena
5
P
PrintablesDuker

League of Legends - Hextech key

Hextech key from League of Legends, as seen in the crafting menu. Update 2021-02-19: Noticed some small nicks (<0.1mm) due to a mirrored emboss, uploaded fixed v2 for the relevant models and removed the old versions.

Pobrania
927
Polubienia
174
Ocena
5
P
PrintablesRichard

League of Legends - Support Keychain

League of legends Support insignia designed as a keychain. (Please like and rate, that would help me a lot) Easy to print in one or two colors. You may try to iron the top surface for better quality, I tried but the slicer doesn't program…

Pobrania
907
Polubienia
130
Ocena
5
P
PrintablesDavid Williams

Legend of Vox Machina - Percy's Pepperbox - The List Weapon (Critical Role)

I couldn't find this on Printables. This is not my work; I am only uploading with credit to the original from Thingiverse under CC. Original description from creator: Pepperbox used by Percy De Rolo from the Critical Role Legend of Vox…

Pobrania
906
Polubienia
237
Ocena
4,8
P
Printables80sNerdBomb

Legend of Zelda Master Sword

My version of Link's Master Sword

Pobrania
903
Polubienia
206
Ocena
4
P
PrintablesJoker3D

League of Legends Ward

This is my approche on a League of Legends Ward. The design is closely related to the classic ward. The ward has a little 2W LED lamp inside so it can be used as a moodlight. The crystal ontop can be removed to replace the lamp inside,…

Pobrania
895
Polubienia
210
Ocena
4,91
P
PrintablesSky Skypc

Legend of Zelda 3D printed multicolor flexi guardian AMS

The print is colored for 4 material print. Can be printed with the Bambu Lab AMS. Print settings: 0.2mm layer resolution No supports needed Visit SwordLab.net for more AMS prepared models.

Pobrania
879
Polubienia
131
Ocena
5
P
PrintablesMoriel

The Legend of Zelda

The Legend of Zelda

Pobrania
852
Polubienia
277
Ocena
5
P
Printablesmistic100

LED Master Sword (The Legend of Zelda)

Though heavily inspired this is not a remix of "LED Zelda Master Sword with Sounds" by Adafruit, but designed from scratch from the source https://gallery.autodesk.com/fusion360/projects/master-sword--sheath-from-legend-of-zelda More…

Pobrania
828
Polubienia
454
Ocena
5
P
PrintablesChrisekai

Riftbound TCG (League of Legends) - +/- Might Dice

16mm spin-down +/- Might Dice for playing Riftbound TCG! These are six-sided dice ranging from +/-1 thru +/-6. Based on the design seen on-stream at Shanghai Nationals 2025. Featuring rounded corners, print with 100% infill for a…

Pobrania
826
Polubienia
40
Ocena
5
P
PrintablesMiniWorld3D

Hyrule Castle - The Legend of Zelda: Ocarina of Time

🗡 🛡 The Legend of Zelda's 37th birthday This model was made by Dany Sánchez . Celebrate 37 years of Link's adventures with us! Back in 2014 this was the first model based on a Zelda location that we ever made. Now in 2023, we updated it…

Pobrania
823
Polubienia
298
Ocena
5
P
PrintablesSaphira

Legend of Zelda Breath of the Wild Topographic Map

Inspired by topographic models of mountains I decided to create a topographic model of the Breath of The Wild map for my brother. I made this model in blender using a height map projected onto a plane before splitting it into six pieces…

Pobrania
818
Polubienia
234
Ocena
5
P
PrintablesBTR3D

SENNA - In memory of the F1 legend

If you are a Senna fan like me, this model is for you. This model consists of many parts. You can print each one in separate colors and combine them easily. You only need to apply a color change on the part with the Senna signature.…

Pobrania
812
Polubienia
199
Ocena
5
P
PrintablesMicro Center

Legend of Zelda Master Sword for Cosplay

Legend of Zelda Tears of the Kingdom Master Sword Inland Filament Used: Blue PLA Silver PLA Gold PLA Printer Settings: 22H 3M total The Hilt may need supports, but with good cooling and bed adhesion you may not need supports 10% Gyroid…

Pobrania
800
Polubienia
194
Ocena
4,88
P
PrintablesLink

Zelda: The Legend Of Zelda: Princess Zelda

Zelda from Breath of the Wild, Tears of the Kingdom, and Age of Calamity. The model is ripped right out of Breath of the Wild, and I remixed it. Scale it to the size you prefer. It probably won’t print well unless you make it pretty big…

Pobrania
799
Polubienia
142
Ocena
2,5
P
Printablestobi takenn

the LEGENDARY 40 rocks

40 rocks for u to chose and print

Pobrania
795
Polubienia
55
Ocena
4
P
PrintablesDziobaasty

Geekvape Aegis legend 2 510 connector repair

Geekvape Aegis legend 2 510 connector repair

Pobrania
793
Polubienia
16
Ocena
4,75
P
PrintablesLink

Zelda: Fierce Deity Sword Full Size: Majora’s Mask, The legend Of Zelda

Important Update Note: I made this model early on with very little experience. Two people have now reported having issues with this model, and it's very possible that this model has problems. I don’t want you to waste your filament……

Pobrania
791
Polubienia
188
Ocena
4,5
P
PrintablesDracx

Legends of Andor game box organizer, includes expansion

This is my first attempt at creating a game box organizer. I created this in 123D Design and I have included that file here, in case you need to make some edits (like separating some pieces to make them smaller for some printers). The…

Pobrania
788
Polubienia
105
Ocena
4,86
P
Printablesredaeq

Sohle, Einlegesohle, Schuh Erhöhung / Insole, shoe elevation 2,5mm, 5mm, 10mm, 12,5mm, 15mm, 20mm, 25mm, Größe 42

Einlegesohle, Schuh Erhöhung, 2,5mm, 5mm, 10mm, 12,5mm, 15mm, 20mm, 25mm, Größe 42 Gedruckt in TPU, kann natürlich auf andere Größen skaliert werden. ----------- Insole, shoe elevation, 2,5mm, 5mm, 10mm, 12,5mm, 15mm, 20mm, 25mm, size 42…

Pobrania
784
Polubienia
49
Ocena
4
P
PrintablesDuker

Legend of Zelda: Ocarina of Time - Small Key

Couldn't find a OoT small key model with the old-school polygonal look (nor a rip of the original model), so I made my own.

Pobrania
776
Polubienia
232
Ocena
5
P
PrintablesWildRoseBuilds

APEX LEGENDS SHIELD BATTERY CONTAINER (MULTI-MATERIAL)

"Gimme a minute, Charging up my shields!" A multi material Apex legends shield container! Printed using 3 colors on the Palette 2 Pro from Mosaic! *model pictured was scaled down to %80. Enjoy! -wrb *Please do not sell prints of these…

Pobrania
760
Polubienia
223
Ocena
4,67
P
PrintablesLink

Tears of the Kingdom (Totk) Legend of Zelda Secret Stone Keychain/Earrings/Jewelry Totk Tears of the Kingdom

There’s two versions, one with a chain and one without. Pretty simple. Print it as is but with support on the build plate. You could use this file to make a keychain, earrings, a necklace, or whatever you want. If you make it, please post…

Pobrania
735
Polubienia
155
Ocena
5
P
PrintablesStuJ

College Football Playoff Trophy

A rough model of the College Football Playoff Trophy. This was made using a combination of the most accurate draft dimensions I was able to find publicly, combined with rough dimensional matching for missing measurements and details. This…

Pobrania
732
Polubienia
64
Ocena
5
P
PrintablesRichard

League of Legends - Jungler Keychain

League of legends jungler insignia is now a keychain. (Please like and rate, that would help me a lot) Easy to print in one or two colors. You may try to iron the top surface for better quality, I tried but the slicer doesn't program the…

Pobrania
719
Polubienia
98
Ocena
5
P
Printablesjattie

Divine Beast Vah Rudania from the Legend of Zelda, Breath of the Wild

Divine Beast Vah Rudania from the Legend of Zelda, Breath of the Wild. This stl model was created using Blender 4.0 using games assets published at: Wii U - The Legend of Zelda: Breath of the Wild - Divine Beast Vah Rudania - The Models…

Pobrania
719
Polubienia
70
Ocena
0
P
PrintablesNanaBanana

Apex Legends R301 Carbine

About this model This model was designed in FreeCAD - FOSS (Free and Open-Source Software) 3D parametric modeler. Source file is available. It is not 100% accurate in details, but proportions are true to original. Requires glue and metal…

Pobrania
710
Polubienia
300
Ocena
5
P
PrintablesArt G

Logos of the College Football Teams of the SEC-South East Conference

This is not all of the SEC Teams - as people request the additional teams I will do my best to respond. All gcode files are setup for manual color changes I will fill in the missing teams as they are requested - Enjoy! All gcode files are…

Pobrania
708
Polubienia
75
Ocena
5

Ahri KDA - League of Legends - 25cm tall model

K/DA exploded into the music scene with their hit song “POP/STARS.” Fans of K/DA can’t get enough of their unconventional flair, from the trademark tails (which fans suspect are real) to otherworldly decor in their studio. “Our songs are…

Pobrania
700
Polubienia
195
Ocena
5
P
PrintablesJosé Pedro

Porsche 911 (964) Turbo 1993 - Legendary German Sports Car Model

Own a piece of automotive legend with this 3D printable STL model of the 1993 Porsche 911 (964) Turbo. This legendary German sports car model is perfect for automotive enthusiasts and fans of air-cooled Porsches, showcasing iconic design…

Pobrania
681
Polubienia
130
Ocena
0
P
PrintablesRealPrint

Tower Mast for cross spans and catanery arms; H0 Turmmast für Querträger und Ausleger

Dies ist ein Remix von Lukass' Electric pole raillroad 1:87 H0. Der Mast wurde verstärkt und vergrößert. Es wurden unten Befestigungen zugefügt. Zusätzlich wurden Halterungen eingefügt, um alte Märklin Querträger und Ausleger zu…

Pobrania
656
Polubienia
52
Ocena
5
P
PrintablesJP3D

Fixed Fuzzy Poro - League of Legends

Just import the model into prusa slicer. The main body already has a fuzzy skin modifier on it. Change it however you like it. Eyes and horns wont be fuzzy. Please print many poros and share your makes :-)

Pobrania
653
Polubienia
87
Ocena
4,83
P

Pencil Holder - Breath of the Wild shrine (Legend of Zelda)

This is oboka's design put through Meshmixer's "Make Solid" feature and Netfabb's "Repair" feature, which corrected a few flaws in the design that led to gaps in the entryway and on the side. Print Settings Rafts: Yes Supports: Yes…

Pobrania
649
Polubienia
179
Ocena
5
P

Jayce Acceleration Rune & Anomaly Mesh Bracelet - Arcane League of Legends - FDM Only

Print the mesh flat and then use heat (heatgun/hairdryer) to carefully wrap it around your wrist. I have posted 2 sizes of mesh depending on how big your wrists are. The rune stone fits into both. I painted mine with acrylic paint AFTER…

Pobrania
639
Polubienia
100
Ocena
5
P
PrintablesLink

Link from Tears of the Kingdom: Tears of the Kingdom TOTK TOTK TOTK Tears of the Kingdom Zelda Totk Tears of the Kingdom The Legend of Zelda

I have since published a better Link model here. Introducing TOTK Link. Needs plenty of supports. I hope to see some makes, particularly if you paint it! I make lots of Zelda models, so if you like this, come check out the other stuff I…

Pobrania
633
Polubienia
83
Ocena
4
P
PrintablesRichard

League of Legends - Midlaner Keychain

League of legends Midlane insignia modeled as a keychain (Please like and rate, that would help me a lot) Easy to print in one or two colors. You may try to iron the top surface for better quality, I tried but the slicer doesn't program…

Pobrania
632
Polubienia
106
Ocena
5
P
PrintablesPopandsicle

Legend of Zelda Star Fragment Table Lamp

After nearly 1,000 hours of collective playtime between BotW and TotK, few occurrences in either game provide me with joy more consistently than discovering a star fragment. I would estimate my total number of star fragments discovered is…

Pobrania
632
Polubienia
548
Ocena
5
P
PrintableszSaber

Apex Legends Raptor's Claw Heirloom

Can't get the raptors claw in game so I modeled my own! I positioned all the handle pieces in the intended orientation to minimize the need for supports. Only 2 of the handle pieces need supports but the areas where supports touch are…

Pobrania
624
Polubienia
74
Ocena
4,67
P
PrintablesK7162

Apex Legends Wattson Figure

A figure of Wattson from Apex Legends in a Thunder Kitty skin. Ripped form game files. This model is provided as is. Print at your own risk.

Pobrania
618
Polubienia
63
Ocena
0
P
PrintablesToukejin

DSA-ish 61 Keycap Set with Legends

Why spend $100 on keycaps when you can spend two weeks and half the money trying to cheat the system? I started with Rozakiin's DSA-profile SolidWorks files , changed a lot of the dimensions to exaggerate the curves, and added large…

Pobrania
608
Polubienia
127
Ocena
5
P
PrintablesCallXYZ

The Legend of Zelda: A Link Between Worlds Chest

This is a exact recreation of the Treasure Chest which was a Bonus Item of the The Legend of Zelda: A Link Between Worlds GAME Big Box Collectors Edition. Not everybody was able to get one, so here is your chance to print one yourself.…

Pobrania
606
Polubienia
79
Ocena
5
P
PrintablesCG Muffin

Apex Legends SA-3 Mozambique

Description This is the SA-3 Mozambique, a pistol-sized shotgun present in Apex Legends (and previously in the Titanfall series). Print instructions Print with your prefered settings. Don't forget to add support. Note : multiparts…

Pobrania
603
Polubienia
84
Ocena
0
P
PrintablesMathieu

Clash Royale - Legendary King's Chest (Multicolor/Multimaterial)

I love Clash Royale. I've been playing since its global release, but only have been able this elusive chest twice (both from quests...)! So, why not make it in real life, instead? Here it is! I have painstakingly divided it into two…

Pobrania
600
Polubienia
72
Ocena
5
P
PrintablesRichard

League of Legends - Botlaner Keychain

League of legends ADcarry insignia. (Please like and rate, that would help me a lot) Easy to print in one or two colors. You may try to iron the top surface for better quality, I tried but the slicer doesn't program the movements the…

Pobrania
594
Polubienia
106
Ocena
5
P
PrintablesZCraftworks

Legendary Fantasy Costume Bracer

This is a costume bracer for a fantasy outfit -- it looks particularly great with a green tunic and cap. Happy adventuring! Sanded and spray-painted brown for a leather-like appearance. I also used diluted black paint for a…

Pobrania
593
Polubienia
322
Ocena
5
P
PrintablesCrimsonEidolon

Legend Of Zelda Heart Container

I've included models for a stand for single material printers as well as multi material printers. The wall mounted lamp is for multi material printers and I'll upload models for single material printers. For the single color extruder…

Pobrania
592
Polubienia
265
Ocena
4,75
P
Printablesalyssa cassity

Triforce Keychain(Legend of Zelda)

Wanted a new keychain after my old one broke. This can be printed in solid colors or you can do a color change halfway through the print. both printed on a single nozzle printer.

Pobrania
586
Polubienia
93
Ocena
5
P
PrintablesLink

Tears of the Kingdom TOTK Light Dragon The Legend of Zelda

The Light Dragon from Tears of the Kingdom. It’s definitely going to need supports, and I also recommend scaling it up nice and big before slicing, assuming you want the fine details. Have fun with this, and if you want to see more, give…

Pobrania
583
Polubienia
95
Ocena
5
P
PrintablesRichard

League of Legends - Toplaner Keychain

League of legends Toplane insignia (Please like and rate, that would help me a lot) Easy to print in one or two colors. You may try to iron the top surface for better quality, I tried but the slicer doesn't program the movements the right…

Pobrania
579
Polubienia
95
Ocena
5
P
Printablesphysicalzero

The Legendary Cool S Thing

My first attempt at 3D modeling. The legendary 'Cool S' shape that we all know, love, and have drawn at some point. I made a thicker version with details on both sides, and a thinner version with detail on only one side. I hope this makes…

Pobrania
573
Polubienia
52
Ocena
5
P
Printablesradius_mcfly

One Piece Master Sword Legend Of Zelda

i needed this sword as one piece for another project has nothing to do with the anime one piece im sorry i couldnt think of another way to name it this is NOT the full size, i had to shrink it down a bit to work with it Category: Hobby

Pobrania
573
Polubienia
39
Ocena
0