Wyniki wyszukiwania: legion

Sortowanie

416 modeli

P
PrintablesIonutN

Lenovo Legion Go JoyStick Protector

An aternative to the existing Lenovo Legion Go Joystick Protectors

Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu

Pobrania
403
Polubienia
39
Ocena
4,5

Lenovo Legion Go table stand

The idea is to place the console attached to the TV by connecting the original power supply, and use the other port through a USB-C to HDMI connector to the TV. The G-Code file is configured for a layer height of 0.2 mm @ 25%, using a…

Wydruk około 4,72 €–5,76 € nettoWstępna wycena jednego wariantu

Pobrania
255
Polubienia
32
Ocena
5
P
PrintablesLukasz M

Lenovo legion go adapter

Adapter for lenovo legion go connect

Pobrania
2099
Polubienia
127
Ocena
4,25
P
PrintablesSecurityDog

Legion Go - Controller Adapter Remix

Remix of the Legion Go Controller Adapter, which is printed in 2 parts with 3 screws. The Remix is printed as one print. Support (i used organic/tree) is requiered Brim is a can, but not a must My printer: Anycubic Kobra 2 Plus I printed…

Pobrania
1748
Polubienia
68
Ocena
4,9
P
PrintablesBrian

Legion Go Slim Controller Connector

The most ideal way to print is vertical and supports for the controller interface, I've printed flat and for me at least it hasn't worked out as well. Lastly I printed with a lot of perimeters for strength and 5% infill.

Pobrania
1629
Polubienia
81
Ocena
4,75
P
PrintablesRobs

Lenovo Legion 5 Gen 6 Laptop Stand support Mount

A stand for the Lenovo Legion 5 laptop that allows you to close the lid

Pobrania
1479
Polubienia
94
Ocena
4,86
P
PrintablesBrian

Legion Go End Cover Plate

I use my GO as a UMPC so a lot of times I don't use or have my controllers connected. I also like my Xbox controller a bit better than the GO's Controllers anyway. This will cover the sides, but I make no promises it will protect from…

Pobrania
1376
Polubienia
87
Ocena
5
P
PrintablesQuatro

Legion go thumbsticks

Introducing custom 3D printed thumbsticks designed exclusively for the Legion Go handheld! Elevate your gaming experience with these meticulously crafted thumbsticks tailored to enhance comfort, control, and precision during gameplay.…

Pobrania
1369
Polubienia
52
Ocena
0
P
PrintablesLtChipotle

Lenovo Legion Go custom backplate + .step source files

Low profile, similar to stock backplate More holes ≠ better cooling Fan standoff to prevent the plate from pressing against the fan and blocking airflow Blocks turbulent areas so airflow is better directed Creates a negative air pressure…

Pobrania
1257
Polubienia
77
Ocena
5
P
Printablesyor42

Lenovo Legion GO Protective case

A protective case for Lenovo legion go tablet; All the protective cases available so far did not support controller separation, so I made my own. it also has slot for perpendicular USB-C adapter on top USB-C slot and kickstand. print with…

Pobrania
1181
Polubienia
83
Ocena
5
P
PrintablesRoboMagus

Lenovo Legion 5 Pro Riser Feet

These feet slide onto the back of the Lenovo Legion 5 Pro laptop for a fairly secure fit. You can pick up the laptop and the feet will stay attached. They do not interfere with the monitor hinge, so you can open / close the lid with the…

Pobrania
1090
Polubienia
88
Ocena
4,92

NexGen3D: Lenovo Legion Go (LeGo) CyberDeck Mod

If anyone would like to support me and my work, please feel free to donate/tip me on Ko-Fi: https://ko-fi.com/nexgen3d Update: Added Step file for the project. Introducing the NXG3D LeGo CyberDeck: Personally, I think Lenovo should have…

Pobrania
1050
Polubienia
128
Ocena
5
P
PrintablesXoxxala

Legions Imperialis Tokens

A set of improved tokens for Warhammer: The Horus Heresy: Legions Imperialis from Games Workshop. Included are the four order tokens (Advance, First Fire, Charge and March), a Fallback token, and six objective markers. Use these instead…

Pobrania
976
Polubienia
15
Ocena
5

NexGen3D: Lenovo Legion Go Audio Enhancement Protective Case

Simple stylish protective case for the Legion Go with integrated audio redirectors. Recommend printing from PETG or PETG-CF, I did mine in PC-CF, avoid stiff plastic like ABS and ASA. Supports are needed at the bottom for the USB-C access…

Pobrania
903
Polubienia
69
Ocena
5
P
PrintablesDodge400

Legion Go Tablet Case

I'm not very good at making models. I wanted a case when carrying the Lenovo Legion Go as a tablet in my backpack. Files are attached. For me, I'm printing it with PETG at 0.2mm layer height with supports everywhere. Fusion 360 export is…

Pobrania
851
Polubienia
74
Ocena
5
P
Printablesprintiq

Legion's Knife from 'Dead by Daylight'

==DE== Dieses 3D-Modell ist eine Prop von Legions Messer aus dem Horror-Spiel 'Dead by Daylight'. Es teilt sich in zwei Teile und nutzt einen Zapfen an der Klinge für die optimale Verbindung. ==EN== This 3D model is a prop replica of…

Pobrania
845
Polubienia
66
Ocena
5
P
Printablesnyknyc

Lenovo Legion Go S stand

No supports needed, 3 wall lines recommended (although I was successful in printing it with 2 wall lines). Please print the STL as shown (on its side) for the smoothest result.

Pobrania
758
Polubienia
36
Ocena
5
P
PrintablesTentaclya

Lenovo Legion Go FPS Controller Adapter Stand

Remix of Legion Go Controller adapter and 3d scanned right controller. Now you have both options with one stand you can take anywhere. Add 3 M4 screw to combine and 1 10x2mm magnet for properly FPS-mode work Also you can buy mouse glides

Pobrania
721
Polubienia
47
Ocena
5
P
Printablesbas

Star Wars Legion Tokens

This is a significant remix of the following files: https://www.thingiverse.com/thing:3035256 Adding 10 new tokens and converting 7 of the original to STL! All of the tokens listed under Effect and Status are included in this upload:…

Pobrania
712
Polubienia
67
Ocena
0
P
PrintablesThatEvilOne

Legion Command Staff

The legions of Rome often have their strength and skill at arms attributed to their iron discipline and cohesion as a unit. This is true but it is only so due to the officers the form the head and mind of the legion. Centurions are the…

Pobrania
693
Polubienia
82
Ocena
0
P
PrintablesAndré

Star Wars Legion Half (1/2) and 1.5 deployment range tool (3 inch)

Same dimensions as the other movement tools in Legion, same width and height. Made grooves for painting, if that's desired. Also a 1.5 range tool for use with deployment cards, where all of them require 1.5 range measurements.

Pobrania
688
Polubienia
8
Ocena
0
P
PrintablesBrian

Legion Go Controller Connector Slim Angle w/ Brace

I have not printed this design, but would try flat first. Vertical might be a pain. I'd assume you'll need supports if vertical, but for horizontal you'd still need supports for the controller interface. I would print with a lot of…

Pobrania
661
Polubienia
25
Ocena
5
P
PrintablesSnuffypot

Lenovo Legion Go - Speaker Enhancer

Made to print quickly and easily with no support. Print Solid, PLA is fine. Only needs 7-8g of filament (2-3m). 6x 5mmx2mm magnets needed (what I already had on hand) 3 on each side. Please remix for other common magnet sizes and if you…

Pobrania
653
Polubienia
51
Ocena
5
P
PrintablesLukasz M

Lenovo Legion Go - Audio Enhancer

Sound directing adapter For Lenovo Legion Go

Pobrania
630
Polubienia
45
Ocena
0
P
PrintablesRICoder

Legion Go Modular Controller Adapter

Modular controller adapter for the Legion Go. The rails for the left and right controller are printed separately and connected to the body with M3 screws / nuts (8mm length). You can design your own body and screw the rails onto that, or…

Pobrania
617
Polubienia
51
Ocena
4,75
P
PrintablesBrickDreams

Star Wars Clone Trooper - 501st Legion Brick MegaFigure (5:1 Scale)

This is a set of pieces that can be used to recreate a Clone Trooper, 501st Legion figure at 500% scale. This figure was released in 2020 and included in two sets between 2020 - 2022. All of the stl files needed to create this have been…

Pobrania
609
Polubienia
93
Ocena
5
P
Printablesgigax2

Legion Go - Controller Adapter --- print without support!

- print vertically - no support - lower layer height is better i created this model because i had issues with supports on all the available ones. i printed with a 0.2mm nozzle, 0.4 should be fine.

Pobrania
609
Polubienia
41
Ocena
5
P
PrintablesJ S

Lenovo Legion 7/5 pro cooling stand

Laptop raiser (stand) for lenovo legion 7 and 5 pro, improves ergonomics and reduces temperatures (up to 10 degrees in some cases!) Fits perfectly to legion's rubber feet Recommended print settings Perimeter generator: classic (not…

Pobrania
592
Polubienia
45
Ocena
5
P
PrintablesMarkGee

Star Wars Legion Base

Base plate for Star Wars Legion modeled to the exact size of an original.

Pobrania
565
Polubienia
32
Ocena
5
P
PrintablesDanKraus

Star Wars Legion - 1/2 (Half) Range Ruler

1/2 (Half) Range Ruler for the 2024 Star Wars Legion Refresh. Modeled from the Print and Play PDF and sized to the same height as the movement tools.

Pobrania
552
Polubienia
22
Ocena
0
P
PrintablesAndré

Star Wars: Legion POI tokens

With the updated 2024 version of Legion, there are now new Player markers and Point of Interest tokens. There's an alternate version that has space for a standard 28mm legion base, usable for instance with Moisture Vaporators miniatures.…

Pobrania
550
Polubienia
13
Ocena
0
P
PrintablesLtChipotle

Legion Go Controller Front Shell

Very early model, not responsible for damage to your unit.

Pobrania
547
Polubienia
52
Ocena
0
P
Printablesrodderz6279

legion go thumbstick extender

printed using 0.4mm nozel with layer hight of 0.12mm

Pobrania
481
Polubienia
31
Ocena
0
P
PrintablesSnuffypot

Lenovo Legion Go - Joy Con rails

The model is symmetrical, so you don't need to flip it, just print 2. While support removal is harder, I've personally found the strength of the joy con side to be much stronger if printed in the orientation shown in the picture. You will…

Pobrania
465
Polubienia
19
Ocena
0
P
PrintablesAdeta

Star Wars Legion command tokens

I wanted some nice quality custom tokens for my Star Wars Legion rebel army so I designed these. You can print it in multi color using a color change. I also designed tokens for all the other legion factions. To make it a bit nicer I…

Pobrania
413
Polubienia
33
Ocena
5
P
Printablesmyalteredsoul

Legion Go Controller Bridge Holder

Just another triangle shaped holder. Measured so that the controllers sit comfortably in your hands while your elbows are at your sides. I spent a week or so playing without anything joining the controllers to take measurements and test…

Pobrania
407
Polubienia
20
Ocena
0
P
PrintablesNazh

Lenovo Legion Go Pro Buttons

I'm going through and CADing up all of the buttons from my Legion Go and decided to make some mods first. I’ve made the D-pad “Stock” in 1 and 2mm taller versions. Along with the D-pad “Pro” in 1 and 2mm taller versions as well. The Pro…

Pobrania
378
Polubienia
51
Ocena
0
P
PrintablesNico

Lenovo Legion Go Thumb Sticks - Various Sizes

I searched high and wide for a replacement stick for my Lenovo Legion Go that was both easy to print with minimal Supports and comfortable to use. While there are some decent options already out there, they weren't really what I was…

Pobrania
362
Polubienia
21
Ocena
4,75
P
PrintablesGraFabLab.com

Metal Legion "King" - chess piece

If you’d like to get this model or explore even more of our work, including full figurine collections, exclusive designs, commercial licenses, and other great perks, you can find everything on our Patreon—see you there:…

Pobrania
360
Polubienia
44
Ocena
4
P
Printablesbas

Star Wars Legion - Status Token Holder

Intended to be used with an FDM printer. This was designed to fit all the 3D printable Status tokens that can be found here: https://www.printables.com/model/426438-sw-legion-tokens Fits at least 11 of each token, and 2 command tokens one…

Pobrania
359
Polubienia
40
Ocena
0
P
Printablesbennydesign

Star Wars - Legion Token Box

This is the standalone token box for “Star Wars - Legion” tokens. I made one to fit the Feldherr Mini Transport Box, but this is not this one. And yes, you will need a rubber band to hold them together. I made one, use what ever makes you…

Pobrania
352
Polubienia
75
Ocena
5
P
PrintablesSean

Lenovo Legion Go Monitor Stand OneX eGPU

Lenovo Legion Go monitor stand holds the Legion Go in the back and a portable monitor in the front. An optional OneX eGPU base can be printed instead of the standard foot for a more compact setup with the OneX eGPU. I've tested up to a…

Pobrania
351
Polubienia
63
Ocena
0
P
PrintablesNat Mercy

Lenovo Legion Go Controller Locking Clip Replacement

I love my Legion Go, but as you may know, one of its biggest points of failure are the locking clips. I searched high and low, and could not find replacements available for sale - 1st or 3rd party, EXCEPT one guy selling a SINGLE PAIR for…

Pobrania
347
Polubienia
17
Ocena
0
P
PrintablesMarkTheEngineer

Lenovo Legion 300W and 230W Charger Mount

This is a mounting point for Lenovo Legion 300W and 230W charger. It's designed to be attached to the underside of a table so that the charger isn't laying on the floor. You can also quickly and easily unattach the charger if you need to…

Pobrania
346
Polubienia
33
Ocena
5
P
PrintablesRflewelling

Lenovo Legion Go Joystick Covers

I wanted to create a print-in-place protector similar to what I've seen out there for the Steam Deck. This has very tight tolerances. Print topside down with supports for the center bit. Once completed, remove the supports then with a…

Pobrania
345
Polubienia
36
Ocena
5
P
PrintablesNazh

Legion Go - Ergonomic FacePlate [PUBLIC BETA]

ATTENTION: FOR THOSE WHO NEED TO TOUCH GRASS OR DID NOT GET ENOUGH ATTENTION AS A CHILD. HEED MY WARNING: I AM VERY DELIBERATELY WITHHOLDING INFORMATION ABOUT THE START/SELECT BUTTONS BEING INCOMPATIBLE WITH MY FREE MODEL THAT I HAVE…

Pobrania
337
Polubienia
43
Ocena
4,75
P
PrintablesDavis

Legion Go side cover for gamesir G8 plus

Side cover compatible with Gamesir G8 plus controller

Pobrania
337
Polubienia
22
Ocena
4
P
PrintablesBrian

Legion Go Controller Connector Wide Angle

The most ideal way to print is vertical and supports for the controller interface, I've printed flat and for me at least it hasn't worked out as well. Lastly I printed with a lot of perimeters for strength and 5% infill.

Pobrania
332
Polubienia
15
Ocena
0
P
PrintablesBrian

Legion Go U shape or Parallel Connector for controller

This would probably be better printed vertically to make the controller interface teeth as strong as possible. I recommend lots of perimeters and little infill. I did not print this model, but it is the same as my angled versions.

Pobrania
331
Polubienia
22
Ocena
5
P
Printablesnyknyc

Stand for Legion Go S with Case

3 wall lines recommended infill 10-15% (10% with 3D honeycomb infill worked fine for me) no support needed, don't worry please print on its side for smooth surfaces (I already rotated the model in the STL file for you) 2 versions to…

Pobrania
326
Polubienia
14
Ocena
5
P
PrintablesDiPT

Assassin's Creed Legion logo

Assassin's Creed Legion logo, based on the rumor images floating around! I couldn't track the original creator to give credit! The base isn't required. Print instructions Rafts: No Supports: No Resolution: 0.2 Infill: 10%

Pobrania
309
Polubienia
41
Ocena
5
P
PrintablesLiova

Fallout New Vegas Caesar Legion Denarius

The lettering and obverse picture is from Denarius texture. The reverse picture is changed to Legion Bull. Print standing with supports for sides of coin body. Category: Props

Pobrania
308
Polubienia
65
Ocena
0
P
PrintablesTRK

Escudo de la legion española para MMU

El diseño está realizado a 10mm en total de altura pero recomiendo cambiar en el laminador el tamaño en eje Z de la base a 3mm y el resto de componentes que van encima a 2mm para ahorrar tiempo y material.

Pobrania
304
Polubienia
19
Ocena
0
P
Printableserongrecomelo

TIE Fighter Landing Gantry/Refueling Station (Star Wars Legion Scale)

I separated the files, to make printing easier. And, I also edited one of the files, to make the Tie Figher fit better. ORIGINAL FILE: https://www.thingiverse.com/thing:3035408

Pobrania
297
Polubienia
69
Ocena
0
P
PrintablesAidan

Star Wars Legion 2.0 Better Half Range Tool

Printed in PLA at 5% grid infill. Print flat on the long bottom edge with all supports or else the peg at the end will not print properly. This model only fits the movement tools that come in the essentials kit. It is not compatible with…

Pobrania
286
Polubienia
25
Ocena
5
P
PrintablesPatrick

Stabile Ständer für Handy, Tablet, Legion Go, Steam Deck, Rog Ally

ein stabiler Ständer für Smartphones, Tablets, Handhelds und einiges mehr. Druckeinstellungen: Layer: 0,20mm Infill: 15% Supports: NO

Pobrania
280
Polubienia
13
Ocena
5
P
PrintablesMrK

Notebook feet for Lenovo Legion 5 Pro 16ACH6H

There are some other feet for Lenovo Legion notebooks on Printables, but they didn't fit my model, so I just designed my own. Only one model included - for the other side just mirror it in PrusaSlicer. I'm just sharing it here in case…

Pobrania
274
Polubienia
29
Ocena
5
P
PrintablesJohn Doe

Lenovo Legion GO travel protective case (tablet only)

print as is is (no support needed) fits LeGo snugly with a space for comfortable remove lining can be added as the width of is bigger 2x m3 screws needed (at least 25mm) 2h printing time for bottom and 1:45h printing time for top on Ender…

Pobrania
271
Polubienia
32
Ocena
0
P
Printablespittyesputty

Lenovo Legion 5 vertical stand

Easy to print vertical stand that I use with my Lenovo Legion 5 15IMH05H to save space on my desk. May or may not work with other models. I used PLA with 0.3 mm layer height, without supports.

Pobrania
271
Polubienia
18
Ocena
4,5
P
PrintablesMark_Wei

legion go-FPShandle

Improving hand feel of legion go for FPS mode

Pobrania
264
Polubienia
42
Ocena
5
P
PrintablesSerinFel

Laptop Stand to fit a Lenovo Legion Y545

Disclaimer : This was designed specifically for the Lenovo Legion Y545 Laptop , with very close fit; the laptop fits the stand like a key fits a lock. I do not know if this stand will fit any other Laptop, including the newer Legion…

Pobrania
263
Polubienia
23
Ocena
0
P
PrintablesCher Sim

Lenovo Legion Go Joystick/Analog Stick Protector/Saver

remix of Joystick Savers V2 by Scout339 to fit the Lenovo Legion Go.

Pobrania
263
Polubienia
27
Ocena
5
P
PrintablesMakerlab

Legion go travel box, slim model

Thanks to its minimalist design, the Legion Go travel bag model offers a great solution for your own projects and is an excellent choice for tablet mode. It is optimized for 3D printers. A 2 mm foam piece allowance is left on the edges.…

Pobrania
262
Polubienia
40
Ocena
0
P
PrintablesNelson B

Legion 7 Gen 7 laptop stand

This model was created from scratch, but the design was copied from Lenovo Legion 5 Laptop Stand support Mount by Minecraft I was in need of a version for the Lenovo Legion 7 Gen 7 (2022) and this design fits well. Print settings: 0.2mm…

Pobrania
254
Polubienia
25
Ocena
5
P

roman legionaire part 1

its the first roman soldier in my roman empire 3d print sesion

Pobrania
252
Polubienia
16
Ocena
0
P
PrintablesF Engineering

Laptop stand Lenovo Legion 7

Attention Please note that your generation of Lenovo Legion might not suit this stand. My version ist the : Legion 16ITHg6 (2022) (11th Gen Intel i7) Lenovo Legion 7i (16") Laptopstand. Safe place on your desk and minimize your laptops…

Pobrania
245
Polubienia
28
Ocena
5
P

501st Legion Star Wars HWT Heavy Weapons Trooper Backpack

If you're reading this I'm going to assume you're interested in joining or are already in the 501st Legion. Please log in and read my build thread on FISD for full details:…

Pobrania
243
Polubienia
120
Ocena
0
P
Printableskilovolt amp

Legion Go compact controller storage

The Lenovo Legion Go is very bulky when fully assembled but shockingly portable when taken down. The core tablet can slip into most standard 9" table sleeves, but the controllers are a little fragile. Because the joysticks are offset,…

Pobrania
239
Polubienia
23
Ocena
5
P

Robot Legion Warrior

This is from our November release, subscribe to our Patreon or Tribe to get the whole kit! There is a 30% discount on STL files for all Patrons and Tribers! https://www.patreon.com/dakkadakkastore…

Pobrania
239
Polubienia
44
Ocena
0
P
PrintablesSean

Lenovo Legion Go Dual Screen eGPU Stand

This modular design allows you to swap between bases or leg sizes to fit your needs. If you don't have a OneX eGPU, that's fine! You can print two of the standard bases, which are interchangeable. The monitor stand will hold a 17.3-inch…

Pobrania
235
Polubienia
35
Ocena
0
P
PrintablesDanKraus

Star Wars Legion POI Token

2" POI Tokens for the 2024 Star Wars Legion Refresh. Modeled from the Print and Play PDF. There are three STL options: Inset for a 27mm base to place your modeled Moisture Vaporators, Comm Stations, Supply crates, or anything modeled on…

Pobrania
225
Polubienia
16
Ocena
5
P
PrintablesBeardedJester

Star Wars Legion Terrain Pieces

This is a set of Star Wars Legion Terrain pieces I designed, generic in style. Category: Toy & Game Accessories

Pobrania
220
Polubienia
48
Ocena
0
P
PrintablesJace1969

Clone Pilot Models "Ideal for Legion Scale"

Also a big thanks to Smitty & Shader over at the Steam Workshop for there input into this model, https://steamcommunity.com/sharedfiles/filedetails/?id=1319299160 Print instructions Category: 3D Printing

Pobrania
218
Polubienia
16
Ocena
0
P
PrintablesJogurtLesny

Analog Stick Protector for Lenovo Legion Go S

If you carry your Lenovo Legion Go S in a backpack or travel case, you know how easily the analog sticks can get bumped, tilted, or slowly deformed over time. This simple but effective accessory solves that problem. I designed a snap-on…

Pobrania
215
Polubienia
11
Ocena
0
P
PrintablesTonis Designs

Laptop Stand for Lenovo Legion 5 Pro 16"

Yes, another Laptop stand… the existing models didnt really work for me. The STL contains the whole model, you have to split it in the slicer or use the provided 3mf. The tolerances worked great on my Bambu P1P. Might be different for…

Pobrania
214
Polubienia
21
Ocena
0
P
Printableslowrizzle

Star Wars: Legion Tattooine structure

I very much like the structures Imperial Terrain has put out in anticipation of SW:Legion, I wanted to make a free simple Tattooine structure. I just aped common Tattooine architecture, those guys are pretty simple, then added some vent…

Pobrania
213
Polubienia
91
Ocena
0
P
PrintablesKingi

Lenovo Legion 5 Stand

Just another stand for a laptop. You will need to mirror the part in the slicer to get the other part. Has an hole for a 9x3mm round rubber pad.

Pobrania
212
Polubienia
14
Ocena
5
P
PrintablesYosyp

Lenovo Legion Go - Controllers' Locking clips

The stock clips seem to wear down quite easily. I designed these as an easy drop-in replacement, after unsatisfactorily printing already existing solutions. Because of their strict dimensional requirements, I also provided a FreeCAD…

Pobrania
210
Polubienia
16
Ocena
0
P
Printablescwwid

Star Wars Legion Dessert Style Building

The building is drawn in Legion scale. It was designed for desert planets, but can also stand on any other planet and battlefield with the appropriate color change. If desired, an awning can be attached to the roof post.

Pobrania
209
Polubienia
54
Ocena
5
P
Printablesbennydesign

Star Wars - Legion Token Insert for Feldherr Mini

I am a neatfreak. So I needed something to carry around all my “Star Wars - Legion” tokens. Either ziplock bags, or .. this. It is specifically designed to fit in a Feldherr Mini Transport box. I do no know, if I can post the link here ……

Pobrania
207
Polubienia
35
Ocena
5
P
PrintablesAndré

Star Wars Legion Half (1/2) 3 inch range tool

All friendly territory in the new Primary Objective maps are of 1.5 range, and none of the currently official tools have this available. This little 3d-print fits nicely into the holes of a range tool to become 1.5 range, and also serves…

Pobrania
205
Polubienia
6
Ocena
0
P
Printablesjq910

Miniature Legion 5 Gaming Laptop (1/4 scale)

Print with 0.1mm layer height to get a cleaner look. Tolerances around the hinge are tight so you may need a hobby knife or some sandpaper to trim down the hinge components to fit. Supports are not required and I have included 4 stickers…

Pobrania
203
Polubienia
52
Ocena
0
P
Printablesdazze1812

Star Wars Legion Storages

Various storage boxes for Star Wars Legion. Use magnets 10x2 mm.

Pobrania
198
Polubienia
47
Ocena
0
P
PrintablesEmemell

Lenovo Legion Go Stand

I couldn't find a nice dock or stand that used or allowed access to the bottom USB C port, and it looks ugly with the cable hanging out of the top of the device. For use with a USB C cable with the connector angled 90 degrees in the same…

Pobrania
198
Polubienia
30
Ocena
5
P
PrintablesKinimodus

Viture One Mount for Legion Go

This bracket is made in a way, that the cooling capabilitys of the Legion Go are not limited by covered fan intakes. I recomend using the Dovetail function in your Prusaslicer for the best print results and to save on support material.…

Pobrania
195
Polubienia
26
Ocena
0
P
PrintablesBrian

Compact Slim angle Controller Connector for Legion Go

Would be better to print vertically if possible vs flat on the bed. Added a gcode to illustrate.

Pobrania
195
Polubienia
15
Ocena
0
P
PrintablesRobs

Lenovo Legion Y540 Laptop Stand support Mount

A stand for the Lenovo Legion Y540 laptop that allows you to close the lid

Pobrania
186
Polubienia
16
Ocena
5
P
PrintablesNickbalis

Lenovo Legion 5 feet

These are some feet for Lenovo Legion 5 laptop. You will need of course two of them and you want them mirrored. They have a tight fit so they don't move when you move the laptop.

Pobrania
185
Polubienia
19
Ocena
5
P
PrintablesAleRiva

Lenovo Legion Go custom backplate 81kW battery

This is a remix of the original backplate by LtChipotle_242586 , modified to fit a thicker 81Wh battery without putting pressure on the shell. The internal geometry has been reshaped to give the battery extra clearance, keeping everything…

Pobrania
183
Polubienia
20
Ocena
0
P
PrintablesWalshy690

Legions Imperialis Tokens With Outer Ring - Remix

This is a remix of the original Legions Imperialis Tokens model but the smaller tokens have been scaled up and I have added an outer ring to each of the pieces to make them a little easier to handle and give more painting options…

Pobrania
183
Polubienia
5
Ocena
0

Lenovo Legion GO Stand

This 3D model represents a stand designed specifically for the Lenovo Legion Go. The stand elevates the device by 7 cm, allowing users to access the bottom USB-C port effortlessly. This elevation also facilitates the use of the Lenovo…

Pobrania
178
Polubienia
9
Ocena
0
P
PrintablesBenster

Buff Frog Alien (Pre-Supported) (Star Wars Legion Scale)

This Star Wars Legion scale frog alien is based on Turgle from the video game Star Wars Jedi Survivor. I've never done character sculpting before this set so this was great fun, and I learned a lot! This model is part of a series of…

Pobrania
173
Polubienia
38
Ocena
5

Lenovo Legion Go Controller Locking Clip Replacement

Legion go retention clip. I hope it works for you if not pls tell me where I went wrong.

Pobrania
169
Polubienia
9
Ocena
0
P
PrintablesCaiben

Star Wars Legion Tokens

Simple tokens to replace the original cardboard ones

Pobrania
164
Polubienia
26
Ocena
0
P
PrintablesOsfald

LENOVO LEGION 230W charger power adapter supply hanger holder

My LENOVO LEGION 5 laptop spends most of time on the desk. So, I had to find the way to hang its charger under the desk top, that it doesn't take up additional space. That is the result, a simple hanger for LENOVO 230W charger (type:…

Pobrania
159
Polubienia
18
Ocena
5
P
PrintablesMiller Bro

INT-4 Mini Rig Star Wars Legion Scale

I wanted more terrain and proxy vehicles to use Print instructions feel free to slice it as needed- I print with supports often enough that I didnt part this one out

Pobrania
156
Polubienia
24
Ocena
0
P
PrintablesNick

Legions Imperialis Order Tokens

We didn't like the original tokens that came with the game and decided to make our own. Not for commercial use, but use them for your personal use :) Thanks to Ben for creating them! Designed for resin printer.

Pobrania
156
Polubienia
5
Ocena
5
P
PrintablesCalebTimoteo

BT-1 Legion - Star Wars Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed No Brim needed Scale it as you like :)

Pobrania
156
Polubienia
69
Ocena
0
P
PrintablesAstroMike83

Lenovo Legion Go Keyboard Dock

This is a magnetically attached Bluetooth Keyboard Dock. I used 1.2mm x 31.8mm Wire Brads to attach the hinge. I also used 8mm x 3mm wide Neodynium Magnets secured with glue. Two Keyboard Supports should be included under the keyboard and…

Pobrania
150
Polubienia
24
Ocena
0