65 modeli
Some Keystone wall plates have thicker retaining bars, such as Leviton Commercial. This remix accommodates this. The file that this was remixed from did not have enough clearance for Leviton's thicker retaining bars which caused the…
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
Leviton Structured Media Cabinet Bracket for UniFi Switch Lite 16 PoE. Print instructions Recommend using Supports to support the lip that holds the switch.
Wydruk około 7,83 €–9,57 € nettoWstępna wycena jednego wariantu
The Push-Lock Pins that you can buy from the store are made of Nylon, but I seem to be having success with PLA as it's what I have on hand. PETG may also be a good option. I've been printing with .2 layer height, 100% infill, automated…
Leviton supplies a shelf bracket kit that spans half the width of the media enclosure. This version provides a shelf with brackets to cover 2/3rd the width of the enclosure for wider objects. Printed with PETG, 0.4mm nozzle, 0.2mm layer…
Shelf for use with Leviton SMC cabinets. Slots on top and sides should allow you to use either tie-wraps or velcro straps to secure the items/devices to the shelf. Print standing on its side using tree supports. Created from scratch using…
Pokemon Poke Ball style wall plate for Leviton Decora rocker style light switch or outlet. Similar dimensions as the off-the-shelf wall plate: https://www.homedepot.com/p/Leviton-Decora-1-Gang-Wall-Plate-White-R52-80401-00W/100036991 This…
This a remix of rainb0w_wheez3's 8/16 port Keystone patch panel made to mount into a Leviton Structure Media Center cabinet. It flexes a bit in the mounts when using normal plastic push pin mounting connectors, but seems to hold up well…
These accessories are tailored for an Ethernet switch resting on the shelf bracket I designed https://www.printables.com/model/302365-leviton-structured-media-extended-shelf-and-bracke The retainer holds the top of the switch in place.…
The ones you can purchase are cheap and work well, but in a pinch why not just print a few? I used PETG for it's flexibility and printed at a 45º angle to not have weakness at the layer lines. Two of the files are straight up and two are…
Leviton SMC 6 & 8 Port Keystone bracket, smaller to fit better on a Lulzbot Mini 2 build plate and take less time.
A small shelf for Leviton SMC's. The shelf can be positioned more left or right by attaching the shelf in different sets of grooves. Support me on ko-fi.
A mounting bracket for a SiliconDust HDHomerun Duo tuner for Leviton structured media panels . I put my tuner in the basement where all of the cables terminate and the main ethernet switch lives. The tuner drops in through the top of the…
This cat ear esque fiber optic loop holder was designed to work with Leviton structured media closets and their pins. It can be oriented in many ways using two pins to fix it in place. The fusion360 file for design is included and…
UniFi Express mount for a Leviton Structured Media Cabinet . The holes are 5 inches on center. UniFi Express can be inserted right side up or upside down to best fit your application. The opening on the bottom is large enough for the…
This model allows for the horizontal or vertical mounting of the Ubiquiti USW Flex Mini network switch in a Leviton Structured Media enclosure. In the horizontal orientation, the switch can be inserted ports up or ports down without…
The idea for this came from OUTLET COVER WITH SHELF by endofblock https://www.thingiverse.com/thing:4627201 but it was redesigned in Fusion 360 to mimic a 3/8" oversize Leviton Decora outlet cover we had where we thought a shelf would be…
I made this model to be easier to print and to use less space. I uploaded the separated version and the whole version. I print the separated version and just glue it, but in the future I will modify it to snap together.
Punchdown puck to save your hands - for Leviton keystones but may work OK with others
A mounting plate for UniFi power over ethernet injectors for Leviton structured media panels . Will accept up two PoE injectors. Works with either the older or newer model that come with the access points. Uses the Leviton push-lock pins…
Uses Leviton push pegs to mount in the box, then slide your switch on the pegs. Pegs are 80mm on center, with 6mm posts
This remix takes the very well designed existing Raspberry Pi 4 + PoE hat case by OzRocky and adds a flange with holes to the bottom part. This addition lets you cleanly mount the case inside a Leviton 47605 Structured Media Enclosure.…
I looked around and could only find novelty or special-purpose versions of the decora wall plates, and only for light switches(the outlet ones need to be slightly taller). I didn't want to have to go out to the store to get them, so used…
A simple bracket that can be used to mount a TP-Link TL-SG108E 8 port switch in a Leviton structured media center. Requires 2 47615-NYL mounting pins and two #8 pan head screws. The #8 screws are 110mm apart so this may be usable with…
Button Recreation STL for the NSI, LUMA-Net, 400 CP, Leviton N0400-CP0
This is a set of brackets to mount a QNAP QSW-M2116P-2T2S Ethernet switch in a Leviton 47605 Structured Media Enclosure . With a bit of work on the model in Fusion 360 you can probably adapt them to other network devices. You'll need to…
Leviton supplies a set of rubber grommets to compliment their metal structured wiring media center. Unfortunately, they do not supply a medium size grommet for the medium sized knock-out. This threaded hole reducer fits through the medium…
ldymanow's AC68U bracket is great. I wanted to put one in a Leviton structured media center but the existing holes didn't line up. I remixed the original to make holes 2" apart that would fit the standard 47615-NYL Leviton pins. Print…
A simple bracket for mounting a Ziply/Verizon/Frontied I-211M-L ONT in a Leviton structured media center. Requires 2 #8 panhead screws and two 47615-NYL mounting pins. The holes for the #8 screws are 70mm apart. Print Settings Printer…
A mounting plate for Raspberry Pi in the official case for Leviton structured media panels . I made this to hang Raspberry Pi in the wiring cabinet where the main ethernet switch lives. Uses the Leviton push-lock pins , but you could use…
This is a 7x2 port horizontal patch panel for Leviton SMC 47605-42W. With two patch panels side by side, a full 28 keystone ports can be added along a single row in the media cabinet. There's space on both sides of the SMC after mounting…
Remix off TL-SG108E holder by Jesse Schauer to fit TL-SG108 mounting holes instead.
PLA seemed to work fine. PETG would probably be more durable.
This is a keystone adapter for a Decora style wall plate. The corner radii perfectly matches a standard Leviton profile. A "TOP" label is incorporated to the front and back side for ease of installation. I recommend printing front side up…
made the shelf bigger and the plate stiffer added a 1deg angle to help keep it from tipping forwards
The WiiM Amp is pretty heavy and I wanted to develop a mount for the Leviton Structured Media Center (SMC) That would be able to handle the weight. I added a lot of mounting holes so you can place it in either side or in the middle of the…
This is a slip in mount for the US-8-60W Unifi POE switch with 4 holes for a Leviton panel mount. Leviton spacing is roughly 6 inches horizontal by 1 inch vertical. It has cut outs for ventilation and the grounding lug on the rear. For…
Need to mount network gear in a Leviton Structured Media Cabinet (SMC)? Tired of having to find the exact printable that fits your network equipment? This set of printables can be used to build out a scaffold where you then use then Hook…
The Leviton 47605 "Vented Premium Hinged Structured Media Door" for their structured media enclosure comes with a hole for an optional lock. When not used, the hole is covered with a black plastic insert. I wanted a white insert so I…
Works on most school switches that require a key.
I made this to cover some blank outlet spaces that I had, as the standard cover was not thick enough to sit flush with the screwless cover plates that I have. I reference an existing plate and just made the actual cover portion stick out…
These are alternative faceplates for the Leviton SDX style fiber enclosures. Blank. SC/LC Simplex/Duplex. SC/LC Duplex/Quad Clearfield Clearview xPAK
I replaced a metal 14x14 OnQ cabinet with a 14x42 plastic Leviton cabinet to support internal WiFi rounters. https://www.amazon.com/Leviton-49605-28P-Wireless-Structured-Center/dp/B07V2P99QG Mount for a 3.5" HD for network storage:…
I use range outlets in the garage for all my 250V tools, welders, plasma cutter, even shop compressor... I do this because it's one of the least expensive options, and because having range plugs on my welders gives me alternative places…
I needed a Pi 4 case for my Leviton smart panel so I added the mounting holes to the Malolo's screw less/snap fit case. This is just the bottom plate it should work with all the different case tops from malolo's for the raspberry pi 4.
Title says it all. Mine keep breaking for some reason, needed a printable replacement. Glow in the dark makes a cool upgrade. Print flat, no supports. Recommend .2 or lower to get sufficient detail around the small nubs on the side.
I swapped the single light outlet in my shop to a power outlet/receptacle (Leviton 5059), so I could install some shop lights I purchased from Amazon. It didn't come with a cover and I didn't see any other designs online or for purchase.…
Leviton holds all Intellectual Property to their stuff, this is just a cover that happens to fit. This could possibly be good for people with physical disability / motor dysfunction.
Leviton 849-1051 dimmer knob to replace your broken one. I used the standard ender 3 v2 profile with .04 nozzle Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: No Supports: No Resolution: 0.2 Filament: generic generic…
I'm building a pedalboard and I was needing a template for my router for a Leviton 5239. Made the design with Fusion 360 Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Category:…
This is a drag friendly remix of my original housing. Instead of a clamp with two screws performing strain relief, this one has no separate clamp, nor does it require the two additional screws and nuts. Strain relief is now intended to be…
I printed this in black prusament PLA. There are two big holes spaced for the media center then two screw holes 120mm center to center, 1.8 mm in diameter. This was perfect for the screws I had on hand and the mounting slots on the back…
Remix to add holes for mounting in a Leviton SMC. Pattern for mounting to one side or central in the cabinet.
I needed a simple way to secure my pi zero to my network cabinet.
This project involved redesign of a coworker's original hanger prototype to accept Leviton 5100-IPS power strips. These were also designed to mount on a 1" thick desktop surface with enough room for thick dual-stick tape (Gorilla tape or…
This is a simple print for a Leviton Decora switch. The settings I chose were: 0.20 mm Quality Generic PLA (Amolen Glow In The Dark) No Supports 15% Infill
I tried PLA, but ended up using some cheap PETG after trouble with breaking arms. I added genuine Leviton push-lock pins, but probably could have printed these too.
I have a Leviton 47605-MDU where I terminate the network stuff in my home. I wanted to use the TRENDnet Ethernet over Coax 2.5Gbps Adapter (model TMO-312C) and I didn't want it just hanging in there. This bracket allows you to snap it in…
I needed a switch cover to prevent accidentally hitting it. One version has the switch fully covered, while the other offers limited access for flexibility. In addition, I have included a child/pet proof version and a plain light switch…
Two of these can be fixed to a Leviton Media Center. Stick a 4 bolts into the back of your power supply, then hang it on slots in these brackets.
This is for the Leviton slide dimmer, # 6672. I found the slider small and hard to grab while quickly walking by, so this nub helps give the slider a bigger surface to grab. Category: Household
Leviton Decora Smart Switch Anywhere Companion (DAWSC-1RW) paddle replacement. Somehow I broke the paddle for my switch. I did my best to recreate it without a reference, but I'm unsure how it's supposed to stay in place. The current…
Created a trim ring to use around a Leviton dryer plug box after new flooring installed
Need to mount network gear in a Leviton Structured Media Cabinet (SMC)? Tired of having to find the exact printable that fits your network equipment? This set of printables can be used to build out a scaffold where you then use then Hook…
Leviton Decora Smart Switch Anywhere Companion (DAWSC-1RW) paddle replacement. Somehow I broke the paddle for my switch. I did my best to recreate it without a reference, but I'm unsure how it's supposed to stay in place. The current…
