455 modeli
Design This fidget has similar characteristics to a butterfly knife, but in a simple, smooth, and forgiving package. It's designed to print in place with zero supports, and has two weight options depending on how “slingey” you want it to…
Wydruk około 1,53 €–1,87 € nettoWstępna wycena jednego wariantu
Messerteller für den Navimow i series. (getestet auf einem i105e, sollte auch für den i108e passen) 6 Klingen und 20cm Schnittbreite (original hat 3 Klingen und 18cm Schnittbreite) Benötigt werden neben den Klingen und den Schrauben nur…
Wydruk około 3,98 €–4,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple holder for a xacto knife. It is designed as safe as possible, so it won't open carrying around. Be careful not to cut yourself :) Just pull the little protection ("child safety lock") down while extending the knife. IMPORTANT:…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
Der Schaber kann ohne Support gedruckt werden. Die Dateien sind für den Druck mit PETG optimiert, andere Materialien sind auch möglich. Zur Befestigung der Klinge am Griff werden 2 M3 Quadratmuttern und 2 M3x12mm Inbusschrauben benötigt.…
Wydruk około 2,75 €–3,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
!! Attention: See the new upgraded model here ! !! While the original print-in-place bearing is fantastic and works very well, the nature of the print-in-place arrangement means that the underside of the top part ends up a little messy.…
Wydruk około 1,98 €–2,42 € nettoWstępna wycena jednego wariantu
Use one side as dispenser, the other is used as weight to ease the use. When one side is empty, simply turn the dispenser around to get wipes from the other bag! Printed it in PLA, though every material could fit.
Wydruk około 11,21 €–13,70 € nettoWstępna wycena jednego wariantu
Toy model of a cantilever bed slinger with movable parts
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Klingenschutz für das gute Käsemesser. Damit die Klinge scharf bleibt und man sich nicht verletzt
Wydruk około 2,16 €–2,64 € nettoWstępna wycena jednego wariantu
Card Slinger 3.0 for MTG / ManaBox App- Easily scan in bulk quantities of cards by hand - Now for sleeved and un-sleeved cards You MUST print the base and insert in transparent or white filament, it will not work properly otherwise.…
My desk was dominated by loose USB cables going to devboards. Trying to use velcro to bundle them left them floppy, and the cables stuck to each other and it was generally a bad scene. It was also hard to quickly extend the cables. So I…
Girl_with_eyeglasses_and_lingerie_Velma_Dinkley_scooby_doo
32mm scale miniature for tabletop gaming. Support on Patreon: https://www.patreon.com/printedencounter
My takes on the various races and player character options of D&D are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast.…
Assorted Gunslingers for your TTRPG needs
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Small goblin with a sling. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The other bald…
Stand um für bspw. ManaBox o.ä. die MTG oder Pokemon TCG Karten einzuscannen. Druckbar ohne Support in 5 Stunden. Zusätzlich benötigt: 8x M3 Schraube mit 10 mm Länge inkl. Mutter Front wurde für den Cutout des Deckels angepasst. -----…
Ersatzmesser Ersatzklingen Für STIHL FSA45 Polycut 2-2 / Replacement blades for STIHL / Stihl Trimmer Blades
After continuing my 3D modeling learning journey, I've finally made some of the additional functional and aesthetic changes I planned! No longer do you need to perform mid-print steps! No longer do you need to worry about tolerances or…
ASA or PETG 0.15 Layer No Support, no Brim needed 100% infill
English Introduction: This 3D print template allows you to create a scraper with a plastic blade that won't damage your print bed. The plastic blades are printed with a 0.2mm nozzle, and it's recommended to use the provided print profile.…
Vielen Dank an die Ersteller der Modellvorlagen, die Maße passten bei mir perfekt! https://www.printables.com/de/model/920133-segway-navimow-i105e-messerteller-fur-6-klingen-un…
This is an add-on for this model by IanO https://www.printables.com/model/1034404-card-slinger-10-for-mtg-manabox-easily-scan-in-bul I printed it at .32mm layer height in PLA.
print the weight at 100% infill. The sling itself can be printed at 15-20% infill.
“Stick this explosive to any surface...or player!” While this model for the clinger grenade can't actually stick to anything, it is still really cool to print out and hold in your hand. I used a reference photo of the grenade and modeled…
Easily prints on an Ender3 in one piece.
Monster Hunter World slinger. The straps are on the large side at the moment until I figure out what armor to make and can shorten them properly. Because many of the armors also change the slinger arms they are designed to be…
A simple, single use mount to hold a Bigtreetech ADXL345 or S2DW accelerometer for input shaper calibration of the Y-Axis on bedslinger printers. Print in the center of the bed, then attach the sensor. Print with Brim for extra bed…
For one of the most common generic type of ADXL345, see picture (15mm screw hole distance and about 20x16mm PCB dimensions) Print the M3x4 or M3x6 model, once the print is done, set the bed to stay hot (don't let it cool too much or…
Hi, this is my take on the Card Slinger 1.0 and the Card Slinger 1.0 Phone Stand Add-On combined. Its smaller cause I dreaded the long printing time. While moddeling I thought about that people, me included, might prefer a version without…
Messerteller für den Navimow i series. (getestet auf einem i105e, sollte auch für den i108e passen) 6 Klingen und 20cm Schnittbreite (original hat 3 Klingen und 18cm Schnittbreite) Benötigt werden neben den Klingen und den Schrauben nur…
This design was inspired by: https://www.printables.com/de/model/84374-cable-clinger/comments from Josh Myer ====================================================================== Settings: line width: 0.6mm infill: 10% Adheasion: You may…
parametric Doorplate / Nameplate parametrisches Türschild ------------------------------------------------------------------------------------------------------------ Disclaimer: I made this to be able to swap the doorplate at the flat of…
A frisbee flinger is a handheld device designed to launch frisbees with high accuracy and speed. Take your frisbee skill indoors. Instead of hitting trees outside, break valuable stuff inside with the redesigned, recalibrated, recharged…
Gardena Sileno Minimo Messerteller für 9 Klingen
Anmerkung: Dies ist für Modellbauer, die bereit sind, das Modell weiter zu modellieren. Es ist die Basis für eine Burg des Mittelalters und erfordert zusätzliche Materialien wie selbsthärtende Modelliermasse, Gips, Streumaterialien und…
After a few years of use, my Ikea octopus' clothespin are starting to fail one by one. So my kids and I decided to design new ones. We went with a spring type hinge instead of a single layer of plastic to spread the load on a wider area,…
En français plus bas Simple clothes peg for using the lonely springs ! It's design for regular size. You have the FreeCAD source file available. Print settings 0.05mm to 0.2mm for the layer height. 0.05mm if you want good quality for the…
Two pieces, I used a headband to keep them together Update 10/27/24: Removed the bottom so you can just lift it up without the cards Made the base 33% taller to add room for more cards and increase the slide slant Thicken the stand legs…
Hilfsmittel um Mähroboter Klingen zu Schärfen. Getestet nur mit original Worx/Positec Klingen, andere könnten durchaus auch funktionieren. Die Klinge sollte aus Sicherheitsgründen nur mit einer Zange eingesetzt werden. Kann auf einem…
S'imprime sans support. Fichier F3D (Fusion 360) mis a disposition si vous avez besoin d'ajuster les cotes qui ont été appliquée en fonction de mon imprimante. UPDATE V2 Ajout de l'axe. (une version complète + une version “easy print”)…
Une charnière pour étendoir à linge pliant. Attention à bien nettoyer les supports internes avant de mobiliser les deux extrémités. Une seule charnière fournie, l'autre s'obtient par symétrie. Commentaire après tests intensifs: Cette…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This device is for propagating trees/shrubs Dieses Gerät dient der Vermehrung von Bäumen/Sträuchern print two of the domes scale the domes for your needs no support needed fill the domes with soil moisture the soil take branch of a tree…
This model can be used to make all the immunity tokens (vrijstellingen) of the popular Dutch TV show 'Wie Is De Mol'. I always thought it was cool to be able to print the ‘vrijstelling’ since i'm a big fan of the game show. Now you can do…
This is my Thri-kreen Gunslinger. This model was made for a fellow Patron of MZ4250 who requested it on the discord server that is available for every Patreon tier. A remix of a model made by MZ4250 . If you like it and/or would like to…
It's literally just the normal one with the hinge spun so you can support it.
Firstly apologies I don't have a complete photo of the figure. I had already handed the figures out to friends before I realised I hadn't taken a completed photo. This is the seventh themed version of my original moveable figure . The…
Perfect for decoration or a trophy topper. This high-detail model may not survive being scaled down. Enjoy! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
If you would like a kit made that you could buy with all the parts preassembled with instructions comment on this model or use the messaging service in Printables Note: Still work in progress as of this date. If you want different magnet…
Moin, original sind nur 3 Klingen an der Messerscheibe, war mir zu wenig für ein gleichmäßiges Schnittbild. Da es fast nur platte Scheiben ohne Design und mit Einpressgewinde online gibt, habe ich mir ein eigenes Modell erstellt. Warum 7…
I'd recommend printing with 2 perimeters, flat on the bed as in the STL and with minimal infill, just enough to give a little internal rigidity. I used grid at 5%.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Ein Schmetterling, um eine geschlossene Fliegengittertüre nicht mehr zu übersehen. Es werden 2 Schmetterlinge benötigt, einer auf jeder Seite der Türe 8 Magnete 6mm x 1mm (2 je Schmetterling) Mit ASA gedruckt, um UV beständig zu sein. A…
Do you find yourself with spare mini marshmallows, M&Ms, wads of paper, and other small objects that need to be hurled across the room? Well look no further! Introducing the amazing FINGER FLINGER: the pocket-sized catapult capable of…
Meant to fit a Card Slinger 3.0 , that has been printed in clear/transparent filament. Use with an adhesive led light strip , and either a snap-in USB-c port that provides 5v , or a USB PD trigger board (like this , this , or this ) of…
Pince à linge basique, ne nécessitant aucun ressort. La solidité du PETG allié au remplissage gyroïde à 30% assure la flexibilité. L'écart de 4mm entre les deux parties de la pince autorise un serrage correct sur les barres du séchoir…
Cowgirl Gun Slinger for your TTRPG
For this project I started with a ender 3 V2 and reused the 40X40 and 40X20 extrusions. I ordered 3 20X20 extrusions from Misumi to stretch the width of the printer to fit the prusa heated bed. The Y axis is on 2 linear rails to give more…
Make sure to download the right version for you. I simply attached the part with superglue after printing.
Kids happen to crash things. Maybe this helps to not have to buy a new bell. Printed with variable layer height on a prusa mk3s.
El foco de Ikea Navlinge esta muy bien pero en determinadas circunstancias es extremadamente brillante o potente. Asi que para reducir la cantidad de luz he hecho esta tapa. Imprimir en otros colores variara la cantidad de luz emitida.…
Unleash the perfect blend of kawaii charm and fierce attitude with this stunning 3D printable anime figurine STL model! This captivating maid-dressed gunslinger kneels in a dramatic pose, wielding her weapon with deadly grace - every…
Material: 15 g TPU (geschirrspülerfest / dishwasher safe) Druckereinstellung: Layerhöhe 0,2 / Infill 20 % honeycomb / Wände 3 / Schichten 5 oben, 5 unten / No Support Gutes Gelingen und über ein Like würde ich mich freuen. Good luck and I…
this is a REMIX and NOT my own design. Original here: https://www.printables.com/model/1034404-card-slinger-30-for-mtg-manabox-app-for-sleeved-an the original is not allowed to be modified nor to be sold - so ni respect to the original…
This is Ikea Navlinge desktop lamp holder holder for IKEA Skadis pegboard. This item is inspired by IKEA SKADIS Collection by CSD Salzburg, it uses the same hook system. Check out the collection of other IKEA Skadis holders I made .
Westworld - Gunslinger (Yul Brynner) Face Off - 1973 3D printable model.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Replacement clothespin for octopus, use the same spring, but last much longer ! Pince à linge de remplacement pour pieuvre, utilise le même ressort mais dure beaucoup plus longtemps que l'original ! Print Settings Printer Brand: Prusa…
Small cards slinger for sleeved cards. Its the SCS I made but because the license of the cardslinger I got inspired by got changed I have to do a remix of my remix. Be aware it will say “Gianni” on the inside cause I made it for a friend…
This is my Mindflayer Gunslinger . This model was made for a fellow Patron of MZ4250 ( Thingiverse , Printables ) who requested it on the discord server that is available for every Patreon tier. A remix of a model made by MZ4250 (…
Klingelschild mit veränderbaren Maßen und Text über OpenSCAD ------------------------------------------------------------------------------------------------------------- Nameplate with customizable measurements and text in OpenSCAD
Ich habe diesen Höhenverstellbaren Tisch in meinem K40. https://www.thingiverse.com/thing:4100163 Dafür habe ich mir 4 dieser Teile gedruckt um Sägeblätter als Tisch zu verwenden. Sägeblätter habe ich von https://amzn.to/4os4H4i und dann…
Meine Version eines PVC Rohrschneiders für Elektroinstallationsrohr
Saw the original, liked it and printed it for my son cos this is right up his street. The thinner “front” edge on the big hole started peeling a bit off bed though, so it got a bit messy and needed some sanding and tidying to get rid of…
This model is aimed to replace the broken spring clip for the IKEA Navlinge table lamp that tends to break when attached to a thick table deck for a while. Minimal deck thickness: 15 mm. Maximum deck thickness: 50 mm. Disassembly The…
The Ikea NÄVLINGE lamp projects a very narrow field of light. I created this tri-shaped diffuser to make the lamp more amenable to area lighting. With proper calibration this part should friction-fit your lamp. Print in vase mode with…
This is the fortnite cluster clinger grenade. pegs for assembly on individual models. print 4x wing and 4x munition models.
Hello, Here is a Halloween-themed figure of a ghost in lingerie for you. The figure is beautifully detailed—it's both amusing and spooky :-D. Spooky for Halloween, yet sexy. Suitable for dioramas or display. The size can be adjusted in…
The support on the clothes drying rack is almost broken. I designed a replacement and printed it, ity does fit well / Pièce de support sur un etendoir àç linge en remplacement de celle qui sont usées et cassées. Les nouvelles bont très…
We use the Nävlinge as a Reading lamp at the couch. Meanwhile, if one is watching TV, the lamp leaves a reflexion on the screen. Thats why I designed the lampshade. It has a slit so it sits loosely to be easily turned. A little lip inside…
I wanted a 6 shooter with storage for all the tokens and no accidental slipping of those. Assembled without glue. Print Settings Printer Brand: Prusa Printer: I3 MK3 Rafts: No Supports: No Layer: 0.15 Infill: 15 Filament: Fiberlogy PLA
TCS win: clip Schlüssel Spezialschlüssel zum öffnen der Serien Pak und puk.
M.A.S.H. - Corporal Maxwell Q. Klinger - 1972-1983
