132 modeli
I made this blinking eyes owl Wall Keychain for my mom who love owl. I took the idea from Amaz.. The first assembly is a bit tricky.
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Soot Sprites (in the style of the Barrel of Monkeys game) Characters seen in Studio Ghibli's Spirited Away as well as My Neighbor Totoro Double-sided (eyes on both sides) These can be played with like Barrel of Monkeys, or used as…
you need: glas cylinder with both ends open about 80mm in width 27x blue LEDs 3x white LEDs 30x 200 ohm resistors 4x 2k ohm resistors 4x 2N2222 transistor ARDUINO nano 5M ohm potentiometer 7V power supply green fabric Use transparent…
Just in time for Halloween, fashionable eye-wear to go with that feline/reptile/alien costume. Or if you are lazy, just these and a pair of chinos. Just rotate the outer ring on either side to open and close both irises. Prints with no…
Watch: These blinking goggles use a remix of my Print-In-Place Iris Box ( http://www.thingiverse.com/thing:1817180 ) which is a remix of emmett's Preassembled Iris Box ( http://www.thingiverse.com/thing:1811143 ). Right and left…
This model was created to add some flair to the amazing Blinking Eyes Owl model: https://www.printables.com/model/180339-blinking-eyes-owl-wall-key-holder. Refer to the original model for the Owl assembly. I have included an additional…
Version 2 of the lamp: https://cults3d.com/en/3d-model/home/ufo-lamp-oneidmonstr For this Version you need: glas cylinder with both ends open about 80mm in width 27x blue LEDs 3x white LEDs 30x 200 ohm resistors 4x 2k ohm resistors 4x…
Multimaterial Keychain from Linkin Park's new logo for the album From Zero. Fast easy print done in 47 min with the Prusa MK4. Settings: -0.15mm Quality -PLA -Support None -infill 25% -Layer change 3.80 Printer Used: Prusa MK4
Support me on Patreon Follow me on Category: Other
I love the blinking owl key holder, but the original does not have a good way of attaching the part to the wall (except double-sided tape maybe). This is just a simple cutout for mounting with one small screw. Please note that the…
Hope you like it! You can paint it to get a multicolor model :)
This object is licensed for PERSONAL USE ONLY . For commercial use contact me at instagram: @portallabs Materials: PETG / PCTG PP / PETG / PCTG for the flexures Very Important: Correct slicing orientations are specified in the…
Ich wollte eine Lampe mit dem Gesicht von Chester Bennington haben. Da ich kleine gefunden habe, habe ich diese Entworfen. Bis auf die Druckqualität ( ich bin blutiger Anfänger) bin ich mit dem Ergebnis sehr zufrieden.
TIP: print them upside down for a nice surface finish.
OUTDATED!! Make the Blinking module featured in This instead: Nasal Activation by Snarling Amplification Blinking (NASA Blinking for short) Made by: Costescu Catalin Mihai (@portallabs on Instagram: Tag if you post this design somewhere…
I made this so you can allow the unit to have suffiecient heat dissaptation while mounted via 3M velcro in your car. Suitable for GarlinKit Tbox Ambient AI Box. Print in PETG or ABS/ASA. PLA will melt on a hot day and might damage the…
As a fan of Linkin Park and a 3D printing enthusiast I wanted a small token or keychain that I could carry with me in memory of Chester Bennington. So I came up with this, a small Linkin Park Logo Keychain. If you have a dual color…
This is a wood textured wall mount for two Blinking Eye Owls https://www.printables.com/model/180339-blinking-eyes-owl-wall-key-holder designed by djedje_zr7 . I loved the owls, but wanted a way to mount them on the wall together. This is…
Keyrings with the different linkin park logos. There are two options for printing: Option 1: Multimaterial Option 2: Changing filament in the middle of the print, colour change (resolution 100%, layer height 0,2) on layer 14.
It's a keychain made from linkin park's logo. I think it looks best printed in two colors. Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No Supports: No **Resolution:** 0.2 Category: Keychains
This is a remix of the loveley blinking owl's back plate to interface the Skadis System from IKEA. The back plate was scaled to 108% to make room to accept a Skadis hook. To print your version of the blinking owl you need the front plate,…
I needed linking rings for my daughters toys so I designed these. They work great. They maintain their shape and flex enough to go around larger poles. I print them 100% to go over an inch rod and then print them at 75% for the rest of…
A Carlinkit mount for the original phone holder of the Dacia Sandero Stepway. Plug and play. Print it in asa/abs/petg
This is a simple bracelet holder stand that can be patterned to hold as many bracelets as needed. Each stand has two arms to hold at least two bracelets, but I've found that as many as 4-5 bracelets can fit on a single arm. The stands can…
The STL locations should match up for easier editing! Make sure the Black is below white and white is below red. You only need about 2 layers of the artwork so scale the STLs to 0.4mm in height. The 3mf is for Bambu Studio or Orca Slicer.…
Мой Carlinkit имеет сильно греется, поэтому установил дополнительный радиатор который мешает прикрепить Carlinkit на двусторонний скотч. две детали необходимо склеить суперклеем, что даст ровную площадку и место под радиатор
Scale it to whatever you want, once the base plate is finished change the filament for a cool two color print.
made a simple LP key chain, enjoy !
Just a simple model for a necklace charm of my 2 favorite bands. Logo designed and created by me. Still a work in progress. May need to be resized depending on newds.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with red At layer #8 (0.72mm) swap to Black At layer #11 (0.96mm) swap to grey At layer #15 (1.28mm) swap to White for the rest.
BEAUTIFUL LINKIN PARK KEYCHAIN FOR FANS OF THE ROCK BAND
This is a gift card with a gear train to make the owl’s eyes blink and make an object move in the sky. By default, a cloud reveals the moon, but you can create your own creative background. It is set up, that you can 3D print the whole…
I modeled this because i had come across the Printables contest for musical instruments. unfortunately it was 2 days before deadline. If you print the Key mech upside down, you can fit all parts on a 220x220 printer with ease, very little…
This specific version is rather a sign than a key fob and it directs to the Linkin Park artist page on Spotify. As noted on the original page for the model, printing this in two colors is highly recommended.
Linkin Park Logo You can find a suitable stand for this Logo here . Disclaimer: I do not own the copyrights to the logo. I just designed a 3D version for non-commercial use.
Double sided key chain
I purchased a Carlinkit from here a few months ago: https://smile.amazon.com/Carlinkit-Wireless-CarPlay-Compatible-2017-2019/dp/B085VVCLKR/ A couple weeks ago it stopped working. Then I realize that if I moved the cable hard wired into it…
Model printed with 0.12 layer height 100% infill Material is Wanhao PETG Printed on the Ender 3 S1
its a coaster from the new logo of Linkin Park
Hello everybody. I needed a holder for my carlinkit wireless adapter to mount inside my glovebox so i made this 3d design. I hope you get good use out of it. I printed it in petg. Have a good one! Category: 3D Printing
Its a two color coaster. Just add a pause in the middle of the print and change the filament Print Settings Printer Brand: Bambu Lab Printer: A1 **Resolution:** 0.2 Infill: 10% Category: Kitchen & Dining
I was tired of printing the 20x20 cubes for calibration and then throwing away when done. So, I decided to create a cube that doubles as a linking block. since my son likes to make little robots out of the blocks we bought. The cube is…
Logos of Linkin Park. I'm just happy to see them back :) File names ending with '.h' indicate that there is a model with a hole at the top. In lowing memoryre of Chester..
This is a remix of the lid piece of LoboCNC's Blinking Cat Glasses . Go to his page to download the remainder of the parts to make these glasses.
Show off your love for rock and metal with this Linkin Park keychain , inspired by the iconic Hybrid Theory album . A perfect accessory for fans of Chester and Mike , it blends music and style into one must-have item. Ideal for backpacks,…
Hi, I made coasters with 8 different logo's of Linkin Park. they are 100mm in diameter. I also made a holder for the coasters with a TPU feet.
I was looking for a new logo keychain for a friend, but I couldn't find one so I made it myself.
Simple stand for Linkin Park Logo .
I purchased one of RetroGameRestore's clear NES shells and thought I'd play with the idea of having different color BlinkingLightWin trays to match a certain aesthetic. I recommend printing with normal supports, 5mm base pattern spacing,…
Linkin Park Keychain with new Logo Its ready to be printed both sides 2 Colors if you have Bambu AMS or other multi color Printer.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 98x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu Silver PLA+ Sunlu White This print uses 4 unique filaments Swap…
A simple Linkin Park logo Keychain Print Settings Printer Brand: Artillery Printer: Artillery Sidewinder X3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 5 Filament: Artillery PLA Category: Signs & Logos
Linkin Park Fridge Magnet - remix of Linkin Park Keychain Magnet hole is set to 16x2.5mm Recomend printing with filament change - gcode for Prusa MK3S attached in files.
Stop letting your spray cans roll around your workspace. This Modular Interlocking Spray Can Holder features a dovetail "chain-link" connection system that allows you to snap as many modules together as you want and expands to fit your…
Customized version of https://www.thingiverse.com/thing:116582 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=116582 Instructions Using the following options: cookie_cutter_dimension = 130 wall_thickness…
A nice Looking Linkin Park wallart.
LinkingTriangles, made in TopMod3D. Category: Art
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 96x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Blue PLA+ Sunlu Sky Blue PLA+ Sunlu White PLA+ Sunlu Red PLA+ Sunlu Yellow PLA+…
The Letters of the Band Linkin Park. Standing. good for Decoration.
Linkin Park Keychain. R.I.P Chester. Category: 3D Printing
This is a fidget That I put together in TinkerCad. Make Sure to print with supports.
My son lost the battery cover for a safety accesorrie from his schoolbag called "Blinkie Kletties" - ergobag https://www.ergobag.de/kletties/special-kletties/blinkie-kletties Category: Accessories
This is a holder for the Carlinkit 5.0. I recommend printing in a vertical orientation with the top of the model, where you would slide the device in, facing down. This would have the tab face up. Carlinkit 5.0 Holder © 2024 by Logan…
Just a little something about the release of Linkin Park's "best of" album Papercuts. Printable on MMU or standard layer change.
Print in ABS or PETG. One piece, tested, passing perfect.
CEdule Linkin park i s držákem
Customized version of https://www.thingiverse.com/thing:229961 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=229961 Instructions Using the following options: height = 2 size = 81 layer_height = 0.01…
A linkin Park christmas ornament of the logo of july 2017 and the most recent one To make the dual color, just stop the print on the right layer and change de fillament Hope you like the desing Merry christmas
Ich habe hier ein LED Herz erstellt und möchte das gern mit euch teilen. Es gibt zwei Versionen. Erste Version ist eine leichte Version die benötigt keine großen Fertigkeiten, ihr braucht lediglich 2x 3mm blink-LED vorzugsweise rot und…
A model cover of my all time favourite nu metal album meteora by Linkin Park
a flashing jig for the two button Linkind switch (ESP32 version) Use DuPont jumper wires for the pins. May have to make the holes a little bigger for them to fit. Remixed from https://www.thingiverse.com/thing:3439815
Use the 3 different types of blocks to create shapes & models. Let your imagination run wild as you explore how the different types can connect. You can also Remix this model to add your own custom shapes, and expand the possibilities for…
can be printed in 2 colors for best effect resize to your liking
This is the lamp cover for the blinking light of an old CASALI gate. Print instructions Designed with Fusion 360. I have printed two small sample to check if it fits correctly before the final part.
[CZ] Model jsem tiskl na tiskárně a1 mini s ams lite. Pro lepší kvalitu loga umístěte model logem na podložku. Doporučuji tisk z petg pokud budete používat podtácky pod horké nápoje. Materiál: PETG DevilDesign Perimetr: 2 Výška vrstvy:…
The Album cover of the album Meteora from Linkin Park.
The Blinking Christmas tree was one of the first prints on my new Mendel90 machine, assembled from a kit of parts from Nophead - and it turned out VERY well indeed. However, I thought that I would make a change to the base so that it…
I created a pixel art lamp with a blinking half-heart. I will use it to stick on the inside of the car window and shine it outside. If you need the scheme I used, you can ask, but it's far from optimal.
The Album cover of the album Minutes to Midnight from Linkin Park.
I wanted to make some sort of 3D printed, blinking LED Halloween project, so here's Jack. You can find a full project write-up on Hackster: https://www.hackster.io/BlitzCityDIY/jack-the-3d-printed-blinking-jack-o-lantern-6a9712 Project…
Used for linking Ikea Curtain rails. I Printed them using PLA but PETG/ABS would be right for long-term use.
Printed in white PLA, 5x wall, 10% gyroid infill
Fillable target made for plinking. Target has a hollow center with fill hole on top.
A wearable holder for magicians. Designed in Hong Kong. Category: DIY
This is a Linkin Park Shell in HUEFORGE Style for Heavys Headphones H1H Here I have another Skadis holder for the shells. https://www.printables.com/model/1358532-heavys-headphones-h1h-shell-holder-for-skadis Here's another variant for…
W wielu modelach BMW pęka plastikowy zaczep linki klamki wewnętrznej – przez co linka wypada, a zamek przestaje działać. Zamiast wymieniać cały mechanizm, przygotowałem prosty uchwyt naprawczy , który pozwala solidnie zamocować linkę z…
LinkingStars, made in TopMod3D. Based on this Tutorial: http://cliptic.wordpress.com/tutorials/ Category: Art
Linkin Park Einkaufswagen Chip
the classic trick where it seems like the ring mege together and you can make your own routine
