37 modeli
I've printed it in PETG with 100% infill and 3 perimeters. No need for support. As you can see in the picture, it worked well for me. It doesn't need much torque.
Wydruk około 3,25 €–3,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For removing and installing Shimano Direct mount chainrings, new 12 speed style. Print with 4 perimeters and 25% infill in PETG. Print with the notches facing up and supports on. Clamp the tool in a vise and rotate the crank to remove the…
While working on the second revision of the MRF I got frustrated enough with the “rotating lens” Mamiya Press lens mount that everyone's using bending or breaking the post on the sensor that couples to the rangefinder mechanism on the…
It has a thin “lip” so it can engage fully with the Sram boost chainrings as they have an offset. I can be used with a 3/8" driver. Printed in PETG it is strong enough for the required torque. Print settings Material: PETG Resolution:…
I got profoundly sick and tired of the awful O-ring style LEE locknuts that keep migrating. I couldn't be bothered to cough up the money for a bunch of locking ones, so I decided that I might as well learn to use the 3D printer that I…
J'ai eu besoin de designer une clé de desserrage pour centerlock par OZ racing. Fait sur fusion360 Imprimé en Pla+ sans supports I needed to design a Lockring Wrench for center lock by OZRacing. Done with fusion360 I printed it in PLA+…
I was asked to create a bayonet with lockring similar to my Mamiya Press version for Pentacon 6 lenses. So here it is! I've provided STEP file for use in your own projects. See the main image for assembly order. The center ring screws…
This is a modified lockring/adapter for the Perpendicular Drilling Jig by @poulanker. It fits the Bosch GSR 12V-15 (without FC!).
Adds a base to the ballsocket to prevent it rotating and give more stability. The optional lockring slides over the top and locks the ball into the tabs and prevents the tabs on the socket from breaking off. The reduction in mobility,…
This tool is designed to remove 12-toothed spline lockrings on bicycles. Minimum wall count: 3. Recommended: 4 walls. Print this part a slight bit hotter than the manufacturer's temperature. To get maximum use out of it, this part needs…
This attaches to the pegboard using cleats so it can securely attach to the pegboard. Why? Well when I would remove some of my tools, the holder would come out with it. The video explains a lot of it. I was able to print this without…
The title says it all. It's a parametric wrench created in OpenSCAD. As given, this should be compatible with LEE 7/8-14 o-ring style locknuts, though it can be configured for other designs/sizes as can be generated with my locknut…
My bike needed a repair, and no repair shop in my area had this tool available. Since the original is quite pricey and I was likely only gonna need it once, I decided to design a printable replacement instead. It uses M3 steel dowel pins…
Printed with black PETG 0.4mm nozzle and 3 walls are sufficient for 30Nm customize for your needs::…
This tool is designed to remove 12-toothed spline lockrings on bicycles. Minimum wall count: 3. Recommended: 4 walls. recommend printing it with the tool side up, this way it will always be a good fit and more adhesion to your printbed.…
This little contraption uses 2 zipties to lock itself to the chainring arms and prevent the lockring from loosening. It was designed to fit Sram X-sync2 boost chainrings. I've had this installed for over 100km and seems fine so far. Print…
Model przedstawia drukowany klucz serwisowy przeznaczony do odkręcania nakrętki kontrującej zębatki silnika Bosch CX4 stosowanego w rowerach e-MTB . Narzędzie zostało zaprojektowane z myślą o precyzyjnym dopasowaniu do nakrętki oraz…
Meet Figure the Clockrider, inspired by the latest update in 'Roblox Doors.' This unique 3D model showcases a mechanical figure perched atop a whimsical alarm clock. Perfect for fans of the game and collectors alike, this model is ready…
I needed this tool to remove the air spring topcap from my Fox 32mm TC (taper cast) fork and install more volume tokens. It should also be compatible with other forks using the 12-spline cassette tool standard as the original creator…
As first seen on my Instagram page . This tool threads into the crank axle to secure the Park Tool LRT-2 (or similar) e-bike chainring lockring tool into place. The back of the tool is sized to match the Park Tool's 36mm hex profile to…
Park Tool FR-5.2H - Cassette Lockring Tool with Handle holder for pegboard. I use triton screws to mount my prints and they work great. https://www.amazon.com/gp/product/B0B169CQST
This was a bit of a silly thing to make (much less spend as much time designing as I did) because the lockring tool doesn't even need the locator pin. But if yours has a 5mm pin – e.g., for an older quick-release axle – and you're working…
Store and organize your Park Tool BBT18 with this Gridfinity holder. Designed for the BBT18 8-notch bottom bracket and lockring tool. Prints great in PLA basic at 0.2mm standard print profiles. You can print this in a solid color, but I…
Magene P505/P515 lockring to Shimano Hollowtech II 16 notch adapter. I uploaded two different sizes to accommodate wrenches with slightly different major diameters (45-46 mm outside of notches). The minor diameter (inside of notches) and…
Note that the lock ring is left hand threaded.
This is a centerlock key which fits for brands like OZ or even Porsche. I designed this myself and it has a minimal amount of air so that you don't scratch the entire centerlock. I printed it in PETG without support
Designed for a friend. Replaces lockring for lampshade. May not fit your lamp. OD of lamp threads is 39.5mm.
The battery of my Brinkers Grandville bike recently got stolen (Bosch powertube) these batteries are quite expensive. I found a company which is selling battery locks, only problem is that it does not fit my bike directly. So I made a…
Simple 2 part holder specifically for the IKEA KLOCKREN Splatter Screen. This keeps the splatter screen from falling while still making it easy to reach. Contains a slot to allow it to be fixed to the wall with ~2mm-thick tape.
Made a simple tool to help push down the lockring on Traxxas Big Bore and Dravtech shocks. Printed in PLA at 0,12mm layer height. 50% Gyroid infill
This is a simple bracket designed to mount an IKEA KLOCKREN splatter screen. The holder itself is made up of two identical parts , affixed using 12 mm wide double-sided adhesive tape. To prevent the screen from sliding out, the two parts…
The pin which has enough space around it in the frame that it will rattle while biking. As somebody who is sensitive for sound, it is is unbearable. So i printed a very small spacer to prevent it to make any noise. it has to be the…
For my cargo bike, I had to install a new sprocket on the rear wheel. This sprocket has to be secured on the Enviolo freewheel, with a lockring tightened at a torque of 35 - 45 Nm. I did not have this tool on hand, and it would be a…
I really like the Lockrack system in general. That said, their default end caps have come loose easily. They also have a few gaps that I don't like so much. So … There is an end cap matching the original but much deeper for a more secure…
I had a fall and broke the latch on the downtube storage of my Orbea Laufey. I had time to spend away from my bike so I did my best at reverse engineering the shape of the door. The handle needs to be moved from the original door. I did a…
Meet Figure the Clockrider, inspired by the latest update in 'Roblox Doors.' This unique 3D model showcases a mechanical figure perched atop a whimsical alarm clock. Perfect for fans of the game and collectors alike, this model is ready…
Model przedstawia drukowany klucz serwisowy przeznaczony do odkręcania nakrętki kontrującej zębatki silnika Bosch CX4 stosowanego w rowerach e-MTB . Narzędzie zostało zaprojektowane z myślą o precyzyjnym dopasowaniu do nakrętki oraz…
