Liczymy pasujące modele…
I am not the original author. Published here as a make. All credits go to M. Solar and N. Trapp, J. Appl. Cryst. (2018). 51, 541-548 Link to the paper: https://doi.org/10.1107/S1600576718003291 Follow the link above for an interesting…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
This little print-in-place container features a satisfying snap-action lid that swings over 180 degrees. This extra range lets the lid flip all the way out of the way so the box will be stable with the lid open or shut. This special hinge…
Holographic Sight-Like Nerf Scope, print in a standing direction
Lo imprimí en capas de 0,32 con boquilla de 0,4. Quedaron muy bien.
This is my horizontal "widescreen" HoloBox for Smartphones, based on Pepper's ghost illusion technique. Superb for advertising stuff! Very easy build! Print out the two halves snap them together (they have snap-joints). Slide in the…
This time I decided to work not with the form or structure, but with the surface. It was important for me to find out how light is reflected and control its movement. To do this, I formed a surface from small pixels. Each flake is located…
Photos do not convey the effect of holographic 3D printing much, watch it in the video: This time I decided to work not with the form or structure, but with the surface. It was important for me to find out how light is reflected and…
Just designed my own vertical Holobox for Smartphones, based on Pepper's ghost illusion technique. Superb for advertising stuff! Slide in the acrylic glass sheet and put your smartphone on the top. I also made a “horizontal” version check…
Models of all 32 Crystal Classes (= crystallographic point groups) for teaching or practice, with spoiler-free, randomized file names. Pre-oriented for best adhesion and overhang quality. There are no overlaps with the other sets, you can…
I’ve been wanting a cool, retro-futuristic holographic display for my desk, but I wanted to keep the build as accessible as possible. Originally, I was messing around with macro lenses and budget projectors, but I realized that designing…
Učebná pomôcka. Pre úsporu materiálu je 5% výplň.
See more details and a video of the effect in my reddit post . Disclaimer: yes, I know this aren't actually holograms =) Instructions below are based on OrcaSlicer, I haven't tried this in other slicers. Necessary modifications to the…
English This is my first prototype of a protection for generic holographic sights to use in airsoft. I have designed this to reduce the amount of polycarbonate needed to cover the scope glass to be as inconspicuous as possible without…
This is a simple children's ring, medallions and a pendant in the form of hearts with holographic animation (yes, my daughter loved it!). The video shows how hearts "pound": I decided to use the holographic principle that I showed in…
The continuation of my optical searches - 3D printed “holographic” images, which arise due to a slight displacement of the linear structure. Although we see the relief, the object itself, unlike lithophany, has no protrusions and dents. I…
This is a Sight or scope that will fit on most nerf rails (not compatible with 20mm rails or real gun rails)
The continuation of my optical searches - 3D printed “holographic” images, which arise due to a slight displacement of the linear structure. Although we see the relief, the object itself, unlike lithophany, has no protrusions and dents. I…
This model is compatible with the lego system.
None of the models I found had screen accurate circuitry modeled in. They either used a paper print out or a cut up piece of actual circuit board. The included PIC is for reference painting. I also made some minor size modifications based…
A string piece that can be printed in-place without supports. The recommended minimum height for the model is 90 mm if you do resize it (although it may work if you do resize it smaller as long as the strings are double-layered when you…
The continuation of my optical searches - 3D printed “holographic” images, which arise due to a slight displacement of the linear structure. Although we see the relief, the object itself, unlike lithophany, has no protrusions and dents. I…
Models of all 32 Crystal Classes (= crystallographic point groups) for teaching or practice. Pre-oriented for best adhesion and overhang quality. There are (almost) no overlaps with my other sets, you can freely mix&match shapes or use…
Gambody Barad-Dur Adapter for Hologram fan with animation eye of Sauron link for the hologram fan : https://s.click.aliexpress.com/e/_oDCh3Em link for animation :…
The GeekMagic Holographic Cube Stand raises the cube a few degrees forward, which helps you see the animation better if your table is low. There are holes for the legs at the bottom, which need to be peeled off the main part of the cube…
This is a reproduction of wood models originally produced by Dr. Krantz Rheinisches Mineralien-Kontor (Bonn). I tried to recreate the models based on the catalogue available here (provided by the company):…
I printed on 0,24 layer hight with with 0,4 nozzle. First layer on 50% speed and 110% Layer Width. Best holographic effect is with pearl/silky fillament.
Models of all 32 Crystal Classes (= crystallographic point groups) for teaching or practice, with spoiler-free, randomized file names. Pre-oriented for best adhesion and overhang quality. There are no overlaps with the other sets, you can…
Models of all 32 Crystal Classes (= crystallographic point groups) for teaching or practice. Not designed for FDM printing, SLA/SLS printing is advised. This set is designed with chemistry students in mind, I found they learn easier when…
Treolo is a 7" glue less holographic pyramid, easy to print and make, wonderful to see... Update - Added pyramid base 2.0 version. optimized quantity of plastic and open pyramid for objects insertion in animated scene. Update 2 - Replaced…
This model is compatible with the lego system.
This model is compatible with the lego system.
These are some parts that I made for a kid's costume. They are not movie-accurate nor to scale, but I think they serve the visual element of a costume if you're planning on geeking up as an R2D2 this year for Halloween. Here's the costume…
This is a work-in-progress model of a robot leg consisting of two parallelograms (one for the upper leg, and one for the lower leg) with a separate lever to allow the lower leg to be actuated apart from the upper. It's completely…
it might need to be on supports and change it to 50% if you're using Ultimaker Cura also, use blue duct tape because it would stick better enjoy this swiss army knife of the ocean Print Settings Printer Brand: Creality Printer: Ender 3…
TreolONE is a single face holographic display with a mirror base. B.O.M. Printed parts 1 - mirror 120 X 200 X 4 mm. 1 - Glass or plexy 120 X 200 X 2/3 mm (adjustable tilt) 24 - Allen head screws M3 X 10 mm. 4 - Nuts M3 1 - 7" Tablet added…
Designed to maximize build plate exposure for transfer of holographic patterns, but you could switch colors, add text or images, or lots of other customizations. Blades lock into each other via t-shaped pins to open and close like a…
I found some amazing files to make this, and I have been wanting to make something like this for a long time, so here we are. Category: Construction Toys
Description: This 3D model replicates the iconic Rimmer “H” from Red Dwarf . It’s designed to be lightweight and easy to assemble. A small hole allows you to thread a string through, so the “H” can be worn or displayed just like in the…
Make custom holograms with Adafruit’s PyPortal. This uses an inexpensive hologram prism and a servo to create a spinning hologram. Learn Guide: https://learn.adafruit.com/how-to-make-animated-graphics-for-hologram-displays/ Print…
About This is a simple bolt-action pen that I made. Uses Ballograf Original refills, and an M3 heat inserts for attaching the “handle” into the bolt for cycling the action. This is made to be printed also with a 0.6mm nozzle, so…
I was having a problem with the Creality multi-kilogram spool holder. Once it would start turning, it would continue to roll and unspool more material which would then fall off the spool and bind up. This is my fix to help keep a 3 kg…
This print can be made without supports, if everything is oriented correctly, or if the the model is the one without the lighting option, on a Bambu Lab printer. There are 2 different files on here, one is for if you want the option of…
Use 0.2mm nozzle for circut board, the rest works with any other nozzle, but 0.4mm is recommended. Assembly is pretty self explainatory, put the circut board in the top part and glue both halves together, easy alignment with the pins.…
Holo Puck – 3D Model with 5 mm Acrylic Riser (also 3D Printable) Suitable for holographic advertising displays with 48 LEDs. Additional Hardware: 1 × M4 square nut 1 × M4×25 cylinder head screw 1 × M6×10 countersunk screw Optional:…
I was looking for this party accessory, but couldn't find one! So I created and printed my first 3D model. My printer configuration: material PLA - hotend 205°C, bed 55°C layer thickness 0.2mm, nozzle 0.4mm filling 10% speed for…
Darth Vader Hologram projection stand 1:12 scale
Castlevania Slogra. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Creatures
This hologram projector is the closest thing to a real one that you can get (on a low budget of course). This uses a convex lens (a magnifying glass) to reflect the light from your phone and makes it look like it's trapped it in mid air.…
I am very impressed by the Gyroman concept, and wanted to build one. But I was too lazy to assemble the two legs, four horizontal bars, and link part with 16 screws, so I made this version which replaces all that with a single printed…
POV Hologram Fan https://www.aliexpress.com/item/1005007663564664.html?spm=a2g0o.order_list.order_list_main.11.19dc1802LZJP54 Additionally you will need USB-C Li-On Charger with protection circuit and 5V DC-DC booster, so you can boost…
Periodic table (Crystal structure) https://en.wikipedia.org/wiki/Periodic_table_(crystal_structure) Hexagonal crystal family https://en.wikipedia.org/wiki/Hexagonal_crystal_family Cubic crystal system…
Print the connector twice, the frame twice, and the cylinder once. I included a picture on how to easily fit it on an ender 3 bed. I designed a small lip on the cylinder so you can print it without supports.
Here is a metallographic sample holder. It aims to save space and ensure samples don't get scratched during transportation. Note that the inner core needs to be printed horizontally so that the layers run vertical (Parallel with applied…
This IS the birdhouse you've been looking for! R2-D2 inspired bird house with 3D-printed holographic projector. Category: 3D Printing
This is a structural construction kit. It uses a natural set of construction blocks which can fill/divide space. These blocks are based on natural basic crystal structures with high symmetries. This makes the construction kit more…
Models of the 32 Crystal Classes (= crystallographic point groups) for teaching or practice. For projection. Printing not generally advised, although some models can certainly be printed. I found the best way to learn concepts like…
This set is geared towards classroom teaching. It is meant to be as instructional and simple to understand as possible, while being easily printable. It is not designed to pose much of a challenge in any kind of exercise. Look for the…
Organize your everyday essentials with HALOGRIP , a modern 3D printable wall hook designed for motorcycle helmets, baseball caps, tote bags, headphones, jackets and other lightweight accessories . Its clean circular front profile and…
Just a bunch of Teddy amateur acrobats enacting the 32 crystallographic point groups (a.k.a. crystal classes). Heavily inspired by and dedicated to Howard Flack . There's a fair chance he would have enjoyed this. Note: These models can be…
Print the arm and back on the side without support. Use at least 1.6mm walls and 25% infill for strength. Requires heat set insert https://www.mcmaster.com/93365A162/, and ¼-20 socket head cap screw 1 inch long…
You can add your own crystal model, it's glued on. The included crystal file is only an example, of course using the winner's crystal (or some real-life mineral) is a much nicer touch. The crystal model needs a 6 mm hole (probably 6.4 mm…
Center line on this rectangular bar is drawn with the help of parallelogram. Normally we will use a ruler to mark center points at a couple of locations. Joining these two points will give us a center line. We can instead use…
Models of all 32 Crystal Classes (= crystallographic point groups) for teaching or practice. For single color printing simply do not use the accent files. The accents come in a protruding or flush variant (see images), just use what you…
Simple PLA adapter to secure a DSeeLab holographic screen onto a standard light stand spigot. Tested on Manfrotto 1004BAC, should fit others with minimal changes. Requires 1 M6x12 screw and bolt and 1 M6x20 screw. See…
Hologram card from Balatro Taken from frame 1 of the .gif All credit to LocalThunk and Balatro for the design
Low Poly Holographic Billboard
I’ve been wanting a cool, retro-futuristic holographic display for my desk, but I wanted to keep the build as accessible as possible. Originally, I was messing around with macro lenses and budget projectors, but I realized that designing…
Impression 3D Holographique à partir d'un CD, effet d'illusion optique Ici tu trouveras le STL d'un CD à placer sur le slicer de ton choix. ça te permettra de placer les pièces à imprimer dessus. Ensuite tu le supprimes. Tutoriel ici :…
the part with wheels has been updated. Please reinstall. unfortunately I wasn't able to buy the XRP kit so I just designed it and I will describe how it will work. And to make matters worse, my Creality Ender 3 doesn't want to print,…
Low Poly Hologram Projector
Metallography 40mm holder for four 5x5x20mm samples clamped by 4x M3 grub screws with 4x M3 hexagonal nuts.
This model was made to illustrate the principle of the double parallelogram flexure hinge. It allows the primary to move in one direction while preventing movements in other directions. Should be printed in PETG because of its…
Struttura porta blindata brand Filograsso
Models of all 32 Crystal Classes (= crystallographic point groups) for teaching or practice. For single color printing simply do not use the accent files. Here are some simple display stands for these models. The spheres are 10 cm in…
Porta penne stilografiche da scrivania. Espositore. Permette una ordinata conservazione e usabilità delle proprie penne stilografiche. Apprezzabile anche come espositore della propria collezione di stilografiche.
comodo contenitore per ricariche corte di inchiostro per la stilografica
Organizador de mandos a distancia con diseño minimalista en escalera, ideal para mantener tu salón ordenado. Diseñado bajo la marca Stilographic Arts , este modelo combina funcionalidad técnica con una estética limpia. Características…
Description Digital clocks are everywhere, but most of them simply display the time and nothing more. For this project, I wanted to create a desk clock that felt like it belonged in a science-fiction movie. Inspired by futuristic…
The model has two circular test pads attached to ends of a parallelogram flexure. The intention is to use this to demonstrate a 50% reduction in motion at the centre of the mechanism when one of the pads is moved. The other end should be…
This model is compatible with the lego system.
This model is compatible with the lego system.
This hologram projector is the closest thing to a real one that you can get (on a low budget of course). This uses a convex lens (a magnifying glass) to reflect the light from your phone and makes it look like it's trapped it in mid air.…
Simple PLA adapter to secure a DSeeLab holographic screen onto a standard light stand spigot. Tested on Manfrotto 1004BAC, should fit others with minimal changes. Requires 1 M6x12 screw and bolt and 1 M6x20 screw. See…
I am not the original author. Published here as a make. All credits go to M. Solar and N. Trapp, J. Appl. Cryst. (2018). 51, 541-548 Link to the paper: https://doi.org/10.1107/S1600576718003291 Follow the link above for an interesting…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
3D printable topographic miniature of Logroño - 🇪🇸 Spain Capture the beauty of Logroño 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 42.467, -2.440 (LatLng) . It…
Ceci est une boite pour générer un hologramme en posant ton smartphone dessus. J'ai fait une vidéo tutoriel ici : https://www.instagram.com/p/CsyLnOZNkri/ J'ai modifié la boite hologramme, vu chez “3dprintall” en l'adaptant à une vitre…
![Holographic Projector [POV]](https://media.printables.com/media/prints/eedb3826-07ec-48e0-8c6f-9aba3f2d5627/images/10126981_61c28a95-2e04-4373-850b-a89326b87025_b8665886-bd04-4fae-a0ea-7004d302e924/screenshot-2025-06-30-092508.png)
