Wyniki wyszukiwania: loves

Sortowanie

235 modeli

P
PrintablesTyson Nielsen

Couch Armrest Drink Holder / Phone Stand / Remote Holder: For Cloud Couch / Lovesac / Large Sectional

TWO SIZES NOW INCLUDED. Drink holder + phone stand + remote holder for any large/wide sectional or couch armrest or back of the couch. The non-remote side is easily narrow enough to go between your sofa and the wall). I know that it fits…

Pobrania
454
Polubienia
124
Ocena
5
P
PrintablesSilvenga

Disposable Gloves Dispenser

Since those crappy cardboard disposable glove dispensers always seem to be destroyed by the time I get them - I made this parametric dispenser with a snap-on lid. I used 3 walls with a 15% infill. Pictured is PolyLite Pro Gray PLA. I'm…

Pobrania
233
Polubienia
32
Ocena
5
P
Printablesdaimler ennis

God Loves You Necklace

This a decent sized necklace that may be scaled for preference since its a little large. The size is 41*65*11mm. Takes 01:02 to print at .15 Quality, 65 Infill, and 50mm per second. No supports or anything fancy required. I used a skirt…

Pobrania
45
Polubienia
6
Ocena
0
P
Printableszuberio

Pen Spring Kitchen Sink Gloves Clamp

A, 2 part, spring clamp for my kitchen sink gloves that uses a 4mm dia. by 25mm long pen spring for tension. Designed to work with 15mm of travel. This clamp is specifically designed for the dimensions of my kitchen sink counter, but I am…

Pobrania
27
Polubienia
7
Ocena
0
P
PrintablesWiseone

Gloves Belt Clip and Belt Loop

There are these useful gadgets you can purchase from the hardware store to keep your work gloves with you when you are not wearing them. Typically, a small clip that attaches to your belt loop and a larger clip that attaches to your…

Pobrania
1582
Polubienia
302
Ocena
4,96
P
PrintablesVinos

Hulk hands (gloves)

I remixed these for my nephew, who is a marvel fan but just 4 years old. The original hands are way to big for him so I made them 75% size of the original (opening of the wrist is 75mm) and added a handle bar inside the glove so he can…

Pobrania
1572
Polubienia
142
Ocena
5
P
PrintablesUncle Jessy

Sanding Box Glove Adapters for Small & Large Gloves

These are 3D printable glove adapters that you can use for your projects that will allow you to add a hole for your hands/gloves to be screwed in place. No supports required and you should be able to rescale these larger or smaller as…

Pobrania
1236
Polubienia
449
Ocena
4
P
Printables3D PRINT

Boxing gloves keychain

Pendant in the shape of the boxing gloves. 20% infill. Printing with supports.

Pobrania
1081
Polubienia
75
Ocena
5
P
Printablesiamimf

yellow rabbit(spring bonnie) gloves

i used the model from sketchfab to just select and clean the model a bit to be able to 3D print just the gloves since I didn't really want to spend money on some model, so I made it by hand and allowed other people to also use it. oh and…

Pobrania
848
Polubienia
61
Ocena
0
P
PrintablesUnkown

Punching Bag Desk Toy w/ Finger Gloves

Take out some stress or just fidget as you think with this miniature punching bag. Built using a 24mm long, 4mm OD spring I got from a pen. Used tape to stick to secure to desk. For sizing the gloves, what worked for me was using calipers…

Pobrania
824
Polubienia
164
Ocena
4,67
P
PrintablesMian0109

Gardening gloves with claws

Recently I bought my mum gloves with claws for the care of flowers in the garden but the available size was too big. So i decide to use 3D printing, to solve this problem and now the claws allow for comfortable work. After dealing with…

Pobrania
789
Polubienia
208
Ocena
5
P
PrintablesCoopersizeit

Modular Lovesac Sactional Shoe

This is a modular version of the Lovesac Sactional Shoe that I designed. I ran into sactional layout that only required 3 holes and would leave the 4th shoe hole sticking out of the couch where it could be tripped on. This solves that…

Pobrania
756
Polubienia
112
Ocena
5
P
Printablespjvenda

Gloves clip for hanging

I have remade this model - please see v2 here. Remix of Wiseone's model to hold gardening gloves and to hang them on shed's wall. The original model was made to clip to a belt so I remixed it. Printed on PETG at 0.20mm 25% infill (15%…

Pobrania
715
Polubienia
93
Ocena
5
P
PrintablesPumpkin

Boxing gloves keychain

As a kickboxer, I wanted to have an accessory related to martial arts.. so here you go :)

Pobrania
693
Polubienia
55
Ocena
5
P
PrintablesAaronOaks

Wall Mount Nitrile Gloves Holder

A wall mount holder for a nitrile gloves package.

Pobrania
625
Polubienia
79
Ocena
4,9

Lovesac Compatible Cup Holder w/ Wood Texture (Angled and Standard Side)

Designed to fit the angled or standard side insert of a Lovesac couch. Includes cupholder with mug cutout, cell phone holder, basket/remote holder, and shallow tray. Model includes wood grain texture. Pictures show the angled side version…

Pobrania
613
Polubienia
77
Ocena
5
P
Printablesbinominem

Boxing Gloves Key Chain

Boxing Gloves Key Chain

Pobrania
578
Polubienia
54
Ocena
5
P
PrintablesBobboVR6

Moosie the bulldog loves air plants

When I saw this cute French Bulldog on Thingiverse (thanks yuchiayeh), it reminded me of my Son and Daughter-in law's dog, Moosie. I decided to remix it into an air plant holder as a gift to the attendees at their wedding shower. (Theme…

Pobrania
426
Polubienia
83
Ocena
5
P
Printablespatrickzell

Bicycle gloves hanger clamp / Fahrradhandschuhaufhänger

Simple clip with which e.g. cycling gloves or other light textiles can be easily hung up. I use it to store my cycling gloves, balaclavas, etc. with the rest of my cycling clothes and hang them up to dry. Einfache Klammer, mit der z.B.…

Pobrania
392
Polubienia
74
Ocena
4,8
P
PrintablesSamuel Shartzer

LoveSac Cup Holder with Remote and Phone Holder

Same basic shape as the Lovesac cup holder for the more square arm rests. I added improvements: Recess for mug handle, but still enclosed to capture spills Two spaces to store phone and remote. I printed with a wood PLA. Used organic…

Pobrania
370
Polubienia
210
Ocena
0
P
PrintablesJJ G

Lucky 13 🥊Boxing Gloves

This a remix of the fist for Lucky 13 and a Boxing Gloves keychain by AnthonyM . I printed mine with black PLA and painted it with red paint. Print with tree supports, 0% infill, touching buildplate only. For the left hand, just mirror…

Pobrania
364
Polubienia
128
Ocena
0
P
PrintablesqueenMaev

Lovesac Couch Cup Holder

Lovesac Couch Cup Holder This was made for the Lovesac sactional set that has the standard-shaped sides (not the rolled arms). Print Settings I used 20% infill and supports with it being printed cup-hole-side down. Category: Household

Pobrania
357
Polubienia
79
Ocena
5
P
PrintablesGeoff.

Multi-Color Boxing Gloves

Want to print something unique to decorate your car with? You can use some braided string or a beaded chain to hang these boxing gloves from the rear-view mirror. The creases on the glove pick up nicely in the light, especially with some…

Pobrania
349
Polubienia
31
Ocena
4
P
PrintablesNick

LoveSac Sactional Power Hub

Power Hub for Sactional sofa. Fits into the side piece of the Sactional Sofa. Fits 2 inch round power adaptor. I installed this adapter into the power hub: https://www.amazon.com/dp/B07R3YT3M2/ref=cm_sw_em_r_mt_dp_U_9HMLEbHCQFTQK Print…

Pobrania
337
Polubienia
51
Ocena
2
P
Printablesgerard artigas

Boxing Gloves Stand

Layer height: 0.2 Filling: 10% Wall thickness: 1.32 Material temperature: 200 (PLA from print to batch) bed temperature: 60 Flow: 100% Speed: 60 recomended Supports: Yes

Pobrania
332
Polubienia
35
Ocena
5
P
PrintablesMarek Wojnowski

Safety-pin for crocheting (my wife loves it)

This is a safety pin to use in crocheting or knitting, when you put your work off and want to avoid damaging it. I made it for my wife. Works fine when printed with PETG, it is more elastic than PLA. Please better print it slowly to…

Pobrania
328
Polubienia
48
Ocena
5
P
PrintablesJames

Lovesac Angled Cup Holder

An angled cupholder for the newer style angled sides/backs for Lovesac Sactional couches. I used organic supports for the 2 overhangs, 3 perimeters, 15% gyroid infill.

Pobrania
320
Polubienia
27
Ocena
5
P
Printablesf4yrel

Boxing gloves dryer

A simple tube with ventilation holes to make your boxing gloves dry faster. You obviously need to print one for each glove. This model can be customized by adjusting the parameters in OpenSCAD.

Pobrania
318
Polubienia
39
Ocena
5
P
PrintablesOndra

Christmas cookie cutter gloves

Cookie cutter with the shape of gloves. Suitable for baking Christmas cookies. Vykrajovátko ve tvaru rukavice

Pobrania
317
Polubienia
45
Ocena
5
P
Printableslitlnemo

Mission/Craftsman Sofa/Loveseat, 1:12

Designed to match my Tiny Mission/Craftsman Side Table , Mission/Craftsman Chair , and Mission/Craftsman Bookcase (all of which you can see in some of the pics here), this Mission-style sofa makes a nice addition to this miniature living…

Pobrania
293
Polubienia
83
Ocena
0
P
PrintablesIsaac Howard

Glove dryer for Muay Thai boxing gloves

Kids come home from Muay Thai. This allows the glove to open up more so it dries out faster and smells less.

Pobrania
288
Polubienia
20
Ocena
4,5
P
PrintablesCanadianBacon21

Boxing Gloves Keychain

This can be rescaled however you want and do need supports.

Pobrania
287
Polubienia
24
Ocena
0
P
Printablesdav88

minion loves mom

minion loves mom view in full color 3d here: https://skfb.ly/6uL9H Category: Sculptures

Pobrania
286
Polubienia
26
Ocena
0
P
PrintablesMiguelB.

Wall Mount Box Disposable Gloves / soporte para guantes desechables

Wall Mount Box 7cm or 5cm Disposable Gloves. The second version has a hole in the front for easy installation. Soporte para caja de guantes desechables 7cm o 5 cm. La segunda versión tiene un agujero en el frente para una fácil instalación.

Pobrania
262
Polubienia
32
Ocena
5

Lovesac Compatible Cupholder (new better version)

A cupholder compatible with the square arm Lovesac couches. It has about 2mm leeway on the arms to allow for printing error without making it a loss and it doesn't hurt the functionality. Added in my new design which uses less material…

Pobrania
249
Polubienia
33
Ocena
5
P
PrintablesYoupak

Motorbike Helmet & gloves holder

Impression sans supports, le porte gant optionnel est à coller sur le support principal. La “boule” est dispo avec logo BMW

Pobrania
245
Polubienia
40
Ocena
5
P
PrintablesCodi

Gloves holder Skadiu

Skadis holder for gloves box

Pobrania
243
Polubienia
20
Ocena
5
P
PrintablesRobC

Disposable Gloves mount for Ryobi Link

Hang a disposable gloves box using the Ryobi Link storage system. Printed at .30mm without supports using OVERTURE Grass Green PETG. Portions of the cleat remixed from SemaphoreSlim 's Cleat for Ryobi Link .

Pobrania
236
Polubienia
70
Ocena
0
P
PrintablesJohnySaak

My wife loves my 3D printer

Need to explain another printer purchase to your wife? Well this might just help you convince she that is well worth investment. :D Make your wife happy with this combo. Case for AliExpress Silicone Pastry Bag Tips. Case is stack-able…

Pobrania
235
Polubienia
96
Ocena
5
P
Printablesap.engineering

Boxing Gloves Dryer

A piece to keep your boxing gloves opened and breathing to avoid mould and bad smell. No supports needed. For an upgraded version, please considering using some cooling fans and this design:…

Pobrania
224
Polubienia
37
Ocena
2,33
P
PrintablesStefan

Kids Gloves Dryer - Towel Warmers/Heater Hook

Winter has come and the children are outside all the time. They only come in briefly to eat at lunchtime. The robe drips every time. And the space on the towel dryer is tight. Towel dryer? There is no room for towels here! :D I designed a…

Pobrania
224
Polubienia
103
Ocena
5
P
PrintablesDaif26554

Ryobi Link holder for box of disposable gloves (Harbor Freight/Hardy)

I saw RobC's model for his Disposable Gloves mount for Ryobi Link, but unfortunately my box of disposable gloves didn't fit. I made a new design from scratch, inspired by his, to hold my Harbor Freight HARDY brand gloves (which come in a…

Pobrania
215
Polubienia
46
Ocena
0
P
PrintablesRypydus

Gloves and Helmet Holder

Věšák helmy, rukavic, kalhot, bundy, atd… Otvory pro vruty 5 mm.

Pobrania
209
Polubienia
29
Ocena
5
P
Printablesleonardocatuzo

LATEX RESCUE GLOVES POCKET

LATEX RESCUE GLOVES POCKET

Pobrania
206
Polubienia
57
Ocena
4
P
PrintablesPepo Aliaga

PORTABLE DISPOSABLE GLOVES DISPENSER

Ideal to go shopping in the store and have enough spare gloves during these days of quarantine. It is printed in two parts and a cardboard tube of toilet paper is reused. The first part is the container/dispenser structure and the second…

Pobrania
204
Polubienia
42
Ocena
4
P
PrintablesAinon3Dtisk

Snowmen with gloves and hats

Good morning, Welcome to my profile, full of models and miniatures :-) I have beautiful snowmen for you as Christmas decorations. My children love them and paint their gloves, hats and scarves. They are also suitable for decorating the…

Pobrania
189
Polubienia
24
Ocena
5
P
PrintablesModel Magic

Kojak - "Who Loves Ya, Baby?" - 1972-1978

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Pobrania
184
Polubienia
22
Ocena
0
P
PrintablesTaylor

Gloves Holder for French Cleat wall

Fits a box of Gloves from Harbor Freight

Pobrania
182
Polubienia
39
Ocena
0
P
PrintablesPrusapower

Lovesac Power Adapter - Additional Clip Room

Adds more room for you to be able to clip the side of the couch to the base much easier.

Pobrania
177
Polubienia
19
Ocena
5
P
PrintablesDasLukas

Universal Dispenser for Gloves and Wipes - Configurable

A universal and configurable dispenser for gloves as well as wet wipes such as multipurpose cloths or disinfecting wipes. Downloads: On this page, you can download three different holders with different configurations. DM all-purpose…

Pobrania
176
Polubienia
13
Ocena
4
P
PrintablesMattiaElba

Boxing Gloves Lego Miniature

I remixed this gloves for fitting a lego miniature

Pobrania
174
Polubienia
13
Ocena
0
P
PrintablesCoopersizeit

Lovesac Sactional Shoe

This is a model of the Lovesac Sactional Shoe that holds the pieces together. I have not printed this to verify that it works due to it being just over the bed size of my Prusa MK3S. Measurements for the model were taken from an original…

Pobrania
172
Polubienia
21
Ocena
0
P
PrintablesQwiktune

Nitrile Gloves Box Holder

Just a quick and simple, low material use bracket to hold Nitrile glove box

Pobrania
171
Polubienia
21
Ocena
5
P
Printablesdzieciolmaciek

Rubber gloves box

Rubber gloves box

Pobrania
170
Polubienia
24
Ocena
5
P
PrintablesFatTony

Roku/Shield Remote Lovesac Cupholder

Version 1.0 of a very specific all-in-one model made for my Lovesac “Sactional” that tightly slides over the arms of the Sofa. Cup-holder is large enough (Ø3." x .900 deep) to house most cups from tumblers to beer cans. There is also a…

Pobrania
161
Polubienia
26
Ocena
0
P
PrintablesMurdoc

Clips for ski gloves

On my last ski tour I missed to put my gloves together. So I designed these clips where they could subsequently hooked in the loop.

Pobrania
153
Polubienia
60
Ocena
5
P
PrintablesJG2803

Holder for Motorcycle gloves and neck warmer / buffs (screw + adhesive option)

Included long and short sizes for the glove holders. I recommend using just the long one. Scarf holder for buffs / neck warmers. Designed for mounting using adhesive tape on the inside of closet doors. Printing: The glove holders are…

Pobrania
152
Polubienia
30
Ocena
5
P
Printablesdavidlukerice

Hand-E Nitrile Disposable Gloves Holder

This holds a smaller disposable gloves box and allows attaching to the wall with 3m strips. Inner dimensions: 77mm x 95mm x 155 Let me know if there's any other sizes or adjustments that would help you! Printed on my Prusa Mini with…

Pobrania
148
Polubienia
6
Ocena
5
P
Printablestomvh

Nitrile Globe Holder for duoShield gloves

Smaller fit of the nitrile glove holder to fit standard duoShield glove boxes.

Pobrania
144
Polubienia
36
Ocena
5
P
Printablesdragon0504

MTB Full Face Helmet or gloves hippack/belt hook

Simple helmet hook designed to hold up to a full face MTB helmet, in this case it was tested with MET Parachute MCR large size, it slides trough the loop that connects the buckles on the Osprey Savu 5 hippack. The helmet can be mounted…

Pobrania
140
Polubienia
39
Ocena
5
P
PrintablesMaybeItsLesotho

Recliner Remote Holder for Lovesac Angled Cup Holder

Print it out on its smallest face or however you want. There are recessed grooves on the back for 10mm 3M VHB tape to stick it to the Lovesac Angled Cup Holder.

Pobrania
139
Polubienia
10
Ocena
0
P
Printableschuckcharlie

Lovesac Sactional cupholder w/remote slots

My toddlers were losing the recliner remote multiple times a day. The final straw was when a family friend found it at their house. So I designed this model to hold and tether the remote. I found a generic strechy keychain on Amazon and…

Pobrania
133
Polubienia
24
Ocena
0
P
PrintablesEllisMessi

Carbon 13 Boxing Gloves

Using Tinkercad, I combined the boxing gloves and carbon 13 hand joint to make boxing gloves, my printer is broken (and probably forever) but I would recommend using PVA for supports, because there is complete overhangs and in small gaps

Pobrania
131
Polubienia
22
Ocena
0
P
Printablesatvfool

Filament Rack With Lovesac metal tubes (16mm)

Same as the original except the holes are for 16mm rods to fit the metal tubes that came with my Lovesac

Pobrania
128
Polubienia
27
Ocena
5
P
PrintablesKlaus

nitrile silicone Gloves wall mount

designed for a Wuerth (Würth) nitrile glove box (23,5x12,5x7,5cm) Mounting is with glue or double sided tape Update 20/12/22 I added the holder for mounting with Countersunk and for Lenshead.

Pobrania
126
Polubienia
16
Ocena
0
P
Printablestuxbobble

Lovesac Sactional Compatible Coaster

I found a model of the Lovesac Sactional coaster on Thingiverse a while back, and thought it was a great idea. The author had made it slightly lower poly than I would like (a Tinkercad export), so I went into Fusion and rebuilt it from…

Pobrania
123
Polubienia
21
Ocena
5
P
PrintablesHS

Shoe dryer - wall mounted accessory for gloves and hoods

Some years ago I bought a shoe dryer from Clas Ohlson (Article Number: 44-2542) for drying my diving gear, but the glove dryer that came with the shoe dryer was too cramped and short for my diving gloves and hood so the dryer got packed…

Pobrania
122
Polubienia
14
Ocena
5
P
PrintablesC B

Pen Holder - Air Jordan+Gloves

Pen holder with cool Air Jordan's and gloves Printer : Artillery Sidewinder X2 layer height : 0,2 line width : 0,6 support : Brim, 4 lines, gap 0,6 ; infill 10% ; print time ~ 9 h Eono Silk Green PLA MakerWorld :…

Pobrania
121
Polubienia
23
Ocena
5
P
Printablesippe

Biltema Pegboard Gloves Dispenser

This fits disposable gloves box which is sized 113*43mm. I tried several brands and they all fit perfectly. Biltema begboard has 4mm holes 12mm abart. Biltema operates in Skandinavia, but there are other brands with same dimensions and…

Pobrania
114
Polubienia
26
Ocena
0
P
PrintablesColeman Powell

LoveSac Sactional Cup, Phone, & TV remote Holder

This is a cup holder for a lovesac sactional. I built this to hold a coffee cup plus our TV & surround sound remotes that we kept losing. This fits a Samsung remotes. I also threw in a phone holder as well.

Pobrania
113
Polubienia
22
Ocena
0
P
Printablesncsandor

Christmas Style Gloves

Print Settings Material: Several Type Pla Nozzle: 0.4mm Layerheight: 0.2mm Top fill pattern: Hilbert Curve Color Changer - Z layer height First Color: 0.00-1.60 Second Color: 1.60-2.20 First Color: 2.20-3.00 Post Process Not necessary

Pobrania
111
Polubienia
32
Ocena
5
P
Printablespjvenda

Gloves clip for hanging remix v2

Remix of Wiseone's model to hold gardening gloves and to hang them on shed's wall. The original model was made to clip to a belt so I remixed it. Then I reworked model to improve printing performance and usability. Printed on PETG at…

Pobrania
110
Polubienia
17
Ocena
5
P
PrintablesTucho

Snowboarding boots, gloves and helmet carrier

Something to carry all my snowboarding equipment in one hand.

Pobrania
108
Polubienia
19
Ocena
5
P
PrintablesSmabCosplay

Ketheric Thorm Gloves (Baldurs Gate 3) *W.I.P*

Models for Ketherics Gloves / Gauntlets I printed them in flexible Varioshore TPU Knuckles and finger plates are not included yet.

Pobrania
107
Polubienia
27
Ocena
0
P
Printableswhatthefilament

Wireless Charger for Lovesac couch

Wireless charging dock compatible with Lovesac sactional couch Compatible with round wireless charging pucks with a diameter of 98mm or less and a thickness of 10.5mm. You can get a wireless charger with a thickness of up to 14mm if you…

Pobrania
105
Polubienia
39
Ocena
0
P
Printablesbryan0226

SOMD Loves You: Modified RC3 Faceshield with Adjustable Straps and Overhead Support, Medium and Large

Designed and tested by volunteers from SOMD Loves You. A local non-profit organization formed in Southern Maryland, USA. For most up to date version of this design, as well as a full technical data package for other related files and…

Pobrania
101
Polubienia
1
Ocena
0
P
PrintablesGlowKitty

Sactional Tray Table for Lovesac Couch

I printed with 3 walls and 15% honeycomb infill (infill combination turned on) with .1mm layers for aesthetics in ASA. Print vertically.

Pobrania
97
Polubienia
29
Ocena
0
P
PrintablesCoopersizeit

Lovesac Sactional Shoe scaled to fit Prusa MK3S

This is a Lovesac Sactional shoe with the outer dimensions scaled down to fit onto a Prusa MK3S. Leg holes dimensions are the same as an original Lovesac Sactional Shoe.

Pobrania
97
Polubienia
10
Ocena
0
P
PrintablesGage Cullum

Glove Dispenser (Kirkland/Costco Gloves)

Wall mounted dispenser for Kirkland/bulk-sized glove boxes (9.5" x 5" x 3"). 3mm wall thickness. Mounted with 1.3mm thick adhesive strips. Split into 2 parts for ease of printing and then glued together.

Pobrania
95
Polubienia
18
Ocena
5
P
PrintablesBigwillt

Ryobi Link Holder for Boxed Latex or Vinyl Gloves

I created this glove box holder for the Ryobi Link system after trying another one that didn't fit the boxes of gloves I have. I used the Ryobi cleat designed and shared by SemaphoreSlim . Cleat for Ryobi Link by SemaphoreSlim | Download…

Pobrania
94
Polubienia
27
Ocena
0
P
Printablesengineererrant

Disposable Gloves Wall Bracket

Prints quick without supports, assembles quick, holds MedPride glove boxes. Category: Hand Tools

Pobrania
93
Polubienia
25
Ocena
0
P
PrintablesMcLovin

Pegboard Holder for Box of Gloves

Fits boxes of gloves measuring 75mm x 50mm. Compatible with standard 1" spacing and 1/4" holes.

Pobrania
92
Polubienia
12
Ocena
0
P
PrintablesXhero

Lovesac Cup Holder Standard Side

Designed to fit the standard side of a Lovesac couch. Includes cupholder with mug cutout, cell phone holder, and basket. There is a problem with my remotes falling into the basket and since I redesigned this to print better on a smaller…

Pobrania
91
Polubienia
12
Ocena
4
P
Printablesborschaddict

It's FPV Era 5 Arm Guards/Gloves

These TPU arm guards are made for the It’sFPV Era 5 and help protect the arm tips from chipping, scuffing, and other small damage. The longer tail of each guard goes neatly under the stock skid, which locks it in place without any extra…

Pobrania
89
Polubienia
10
Ocena
0
P
Printablesorganom

Rubber Gloves Gridfinity Bin

Gridfinity Box for rubber gloves or small 50cl bottle of water Remix from a 2x5 that Im unable to find anymore Thinkercad link: https://www.tinkercad.com/things/8MvcNU4OsqO-gridfinity-small-gloves-bin 2x2 - stackable

Pobrania
84
Polubienia
16
Ocena
5
P
PrintablesFatTony

LoveSac Sactional 1:24 Scale

If you own a Sactional, you may have tried re-arranging in the past, only to find out that what you envisioned was not as simple as it may have seemed. Maybe you've gotten to the finishing touches and realized you didn't have all the…

Pobrania
83
Polubienia
18
Ocena
0
P
PrintablesTracey Duffy

LoveSac Modular Shoe Replacement

I adore my LoveSac couch BUT the cats kept losing their small toys in that scant 1 inch space under it and I could never get them back. So between the need to clean underneath the couch and a desire to regain my under couch storage, I…

Pobrania
79
Polubienia
16
Ocena
5
P
Printablesbamseaske

Wall holder for disposable rubber gloves

A wall mounted holder for disposable rubber gloves. Mounts with two screws in countersunk holes on the backside through the opening on the front. Printed in PLA, infill 30, brim and support everywhere. Gcode is provided.

Pobrania
79
Polubienia
5
Ocena
5
P
PrintablesOctantis

Disposable Gloves Holder

In efforts to organize my space I created this item for a honeycomb storage wall. It is a bit oversized for my box of gloves to take other brands.

Pobrania
76
Polubienia
14
Ocena
0
P
Printablesmaxelman

Lovesac Sactional - L Shoe

https://www.lovesac.com/products/sactionals-l-shoe-dark-walnut Use the Sactionals L-Shoe for AnyTables that are placed in a corner, or next to Deep Seats, to avoid the corner of a regular Sactionals Shoe from showing.

Pobrania
75
Polubienia
8
Ocena
0
P
PrintablesGalakawicz

Jesus Loves You in ASL

This is a Jesus Loves You sign in ASL with the words beneath it. You can either print as a whole whole piece, or print separate pieces that can be sized up since the whole piece can only go so big on most plates. The pieces have…

Pobrania
74
Polubienia
10
Ocena
0
P
PrintablesFF3D Makes

Suport for racing gloves and headset

Easy to mount with a M6x12 screw

Pobrania
72
Polubienia
3
Ocena
0
P
PrintablesDeeuutee

Bella Loveseat

A traditional loveseat for a dolls house or architectural model. It's 11.8cm wide, but resize to a suitable scale for you. Print all in one colour, or two colours. See also the armchair.

Pobrania
71
Polubienia
19
Ocena
0
P
PrintablesSharpener

Handschuhhalter für 4 Garten-/Arbeitshandschuhe - Glove holder for 4 garden/work gloves

Um die herumliegenden Handschuhe besser bei der Hand zu haben… Verbesserte Version, die äußeren Halter etwas breiter für mehr Stabilität To keep the gloves lying around easier to hand…To keep the gloves lying around easier to hand……

Pobrania
70
Polubienia
19
Ocena
5
P
PrintablesSoggySheepdog

Husky Tools Latex Gloves Box Holder

Print 1 left and 1 right for each holder

Pobrania
70
Polubienia
25
Ocena
0
P
PrintablesCyl

[Parametric] Lovesac Sactional - Square Side - Top Table

This customizable side table for Lovesac Sactionals is designed to slide onto a square side to provide a more stable flat surface and protect your Sactional cover. STL, SCAD, and 3mf files provided. No supports necessary for printing. The…

Pobrania
69
Polubienia
12
Ocena
0

Spiderman coin (ammo) for shooting gloves

For multicolor printing, 3 colors recommended. One for black coin body, second for red parts, third for eyes. Dimensions: diameter -> 34 mm, 2,2 mm height. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 **Rafts:** No Supports:…

Pobrania
69
Polubienia
9
Ocena
0
P
PrintablesDvG3DAtelier

Compact Wall Mount for Boxing Gloves all sizes - Kompakter Wandhalter für Boxhandschuhe alle Größen

This wall mount is designed for storing boxing gloves in a simple and compact way. The model uses very little printing material while still providing a strong and durable structure. The geometry avoids thin protruding parts, which makes…

Pobrania
68
Polubienia
9
Ocena
0
P
PrintablesCoopersizeit

Modular Lovesac Sactional Center Shoe

Lovesac Sactional center shoe to set up a couch with individual lounger seats with sides (side-seat-side-seat-side).

Pobrania
68
Polubienia
12
Ocena
0