Liczymy pasujące modele…
I remodel the original part in solidworks and added a vertical splash guard. This prevents the coffee powder from splashing over the portafilter. If you only need the main holder you can download the solidworks file and remove the splash…
Wydruk około 2,29 €–2,80 € nettoWstępna wycena jednego wariantu
The rack mount can be printed standing on its front side without supports. There are holes on the rear side where threaded M3 inserts can be installed, enabling mounting of the retention clips with M3 screws. For more details, please…
A shelf for the universal 10-inch rack project, using either commercial rails or 2020 extrusions, for the base frame.
The first consists of two parts, the first part (I_a) is clicked on the USB from above, the second part (II_b) is slid on the first. The second cover (II) is clicked on the USB from above. The first version is possible until heavy rain,…
The Printables version will not be updated. The best place to get it is here: https://captainbobsim.com/product/the-cessna-172-project-files/?customize_changeset_uuid= Find the MobiFlight code under Section 2/2-5 Instruments/SMALL_OAT…
TPU GPS mount - HGLRC M80 Pro
An adjustable mounting solution for generic IPTM80 / PTM80 machine torch from Amazon to mount to the Langmuir Crossfire CNC Plasma Table. Also has mounting brackets for two straight line lasers for easier lining up of work piece.…
ZA13-C wireless mod with delux m800 ultra internals using original top shell. You only need to prepare ZA13-C, delux m800 ultra, and this parts. You have to trim the topshell and cut two side button's pin of the m800s side PCB.
This is a tiny small print for key lock replacement Print into Super Quality mode Remove all previous lock support from key and glue with CA in place. Be carefull on centering key and switch.
Tiny whoop frame 65mm & FM800 mini Futaba Fasst receiver 6mm motors Printed in PETG Frame & LiPo Holder: 6.5g Frame & LiPo Holder & Motor Cap Frame: 8g https://www.aliexpress.com/wholesale?SearchText=kingkong+ldarc+f3+B2 Print Settings…
GPS Mount for the Sector 5 V3 for the M80 Pro version. Heavily inspired from the Standard GPS holder. Added V2 version which as a small brace between the mounting holes to make it more rigid. Print Settings Printer: Artillery Genius Pro…
update 30/09/2022 - updated design of version 1, added version 2 Designed for Alien 5" ReadyToSky frame. I printed it with TPU 95A. Other FPV stuff: Alien 5" GoPro mount Alien 5" action cam mount Alien 5" GPS mount Alien 5" Legs Mobula 6…
ZA12-C wireless mod with delux m800 ultra internals using original top shell. You only need to prepare ZA12-C, delux m800 ultra, and this parts. You have to trim the topshell and cut two side button's pin of the m800s side PCB.
ABOUT THE MODULE SIM800L GSM/GPRS module is a miniature GSM modem, which can be integrated into a great number of IoT projects. You can use this module to accomplish almost anything a normal cell phone can, including SMS text messages.…
I created this box so that it is easy to open the top to access the SIM-card You need M3 bolts to fix the LilyGo T-call module and M2 bolts to fix the OLED module
For anyone who bought a 26mm condenser capsule for BM800 and doesn't want to modify the standard holder. It is a 3 piece design, so it's not hard to print and should be sturdy enough even without glue. Print instructions: All parts are…
Hope it helps someone :) Mount for ELRS antena and M80 Pro GPS from HGLRC. Print Settings Printer Brand: Creality Printer: Ender 3 Pro (Direct drive) Rafts: No Supports: yes Resolution: 0.2 Infill: no - use 500 perimeters insted Filament:…
This is a mount for the HGLRC M80 GPS unit. You can print it vertically or place it on the back wall. Recommended settings: Material - TPU (SainSmart) Temp - 230/50 Infil - 100% rectilinear Mode - speed Nozzle - 0.4mm Layer height - 0.2mm
M80 Nut & Bolt. This is the giant bolt you need in your life!
ZA11-C wireless mod with delux m800 ultra internals using original top shell. You only need to prepare ZA11-C, delux m800 ultra, and this parts. You have to trim the topshell and cut two side button's pin of the m800s side pcb.
M80x1 threaded dust caps, male and female, for astronomy. These threaded dust caps are useful for astronomy cameras, telescopes and adapters. This thread size is used on Lunt LS50Tha solar telescope front caps and Lunt LS50C compact…
Helps keep the dust inside the grounds container of my Graef CM800 coffee grinder. Might also work for other models.
70mai M800 Dashcam mirror holder. Adapter with 15mm ballhead, you can use step file to fit your own clamp. Print with PETG or ABS. Please note the print orientation shown in pics. Need 2 x M3*10mm countersunk head screws and 2 x M3…
apex m800 keycaps Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.1-0.2 Filament: print-me pet-g Category: Computer
Here is my gps mount that will fit any quadcopter that has a 32mm spacing back plate and 20 mm high standoffs. was designed for the AOS series of qaud copters but will fit anything that has a back spacing of 32mm. printed with ninja flex…
There are several low-cost electret mics which go by names like BM-700, BM-800, K-5000, E-1000 and so on. I made a holder for a 26mm capsule that fits on the original mounting for all of you who want to drastically upgrade their mic. You…
I recently bought a UNI-T model LM100 laser distance meter. Unfortunately, this meter is not equipped with a thread for fixing it to a tripod. So I designed a suitable holder with 1/4" UNC thread which allows you to mount this meter on…
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.
The M80 mount comes witha a rubber ring for 31.8mm handlebars, so I made my own 25.4mm version from TPU. Print settings: 3 walls, 25% infill (Gyroid), no support
I designed this GPS support for the Falconrad 7 inch drone to accommodate the HGLRC M80 Pro GPS and three SMA connectors for video and RC link with bardpole. I used tpu eryone with bambu p1s printer 30% infill Normal support
M80 Logo It can be printed in multi color eather in Bambu Lab studio, or in Cura by adding a pause in the layer tool, to shift filament. It can also be printed seperately and glued together. Will recommend printing the parts upside down…
The handlebar switch for the Shimano EP8 (STEPS SW-EM800-L) seems to break off quite easily. Since I couldn't find a replacement part, this is what I came up with. Depending on how your switch broke off, you might have to take the switch…
Built this for my Bosch GLM 80 laser distance measurer, might fit other models too. Press a ¼"-20 nut into the base to make it compatible with any standard “photo” mount monopod. Set your monopod to a known height - 4'-0" works well.…
Protective TPU Case for DODOSOUL M800 MP3 Player This is a custom-designed protective case for the DODOSOUL M800 MP3 player, specifically optimized for 3D printing with flexible TPU filament. The model prints cleanly without the need for…
M80M Flux speaker podiums and podium modeling rings
Here is my gps mount that will fit any quadcopter that has a 32mm spacing back plate and 20 mm high standoffs. was designed for the AOS series of qaud copters but will fit anything that has a back spacing of 32mm. printed with ninja flex…
This is a rail guide which fits into the feeder assembly of the TVM802(a/b) models. The purpose is to keep the tape down to prevent the ‘prick’ from sticking (common with paper tape) or ripping apart the tape (common with plastic tapes).…
This is accessory mount for https://www.thingiverse.com/thing:3064253 Mounts for: GPS M80Pro (26mm x 25mm x 8mm) Added lower 6mm version mounting on: TBS Source One v3 Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No…
Dual DAR filter adapter design for m8018 abcros mask. Print instructions PET-G Infill: 50%+ Contur 4x Support : no
Three segmented saddle for 34mm capsules. The center section should be printed using TPU. Use a 3mm heated insert in the base. Stack the segments and secure with a M3 screw.
UPDATE: I uploaded Rev4b. Makes it easier to secure the 2555B capsule. I made this saddle to fit the JLI-2555BXZ3-GP capsule on a BM-800 style microphone body. The body I used for this build is a Mackie EM-91C which essentially is a nicer…
tpu holder for Readytosky Johnny fpv drone frame mounts on the back of the drone as usual.
Mounts for: GPS M80Pro (26mm x 25mm x 8mm) XT60 Caddx Vista antena HD lower 6mm version mounting on: TBS Source One v3 Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Rafts:** Doesn't Matter Supports: Yes **Resolution:** 0.2…
I designed this enclosure for the meter to make it more compact, which in turn required modifications to the printed circuit board (Eagle Cad). The result is a small and compact device. To assemble it, you need to fabricate and assemble…
Use tree supports, print bottom down.
Love my Corsair MM800 mouse pad, however occasionally my mouse cable would get hung up just enough to throw me off on the bump on the back. I designed this thing so the sides of the bump are more gradually sloped, preventing hangups from…
Things you need: Original hardware 625zz bearings 2pcs MR 126 bearings 2pcs for the wheel (optional) Just replace the whole wheel assembly with the printed parts. There is two versions of the wheel one works with bearings and on with the…
This is an under desk/table mount for the Ugreen CM806 USB 3.2 hub from Amazon. Designed so that when the backing plate is installed and screwed down there is no play when inserting removing USB drives etc. Though this will depend on…
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.
Hello This is a mount for the BDR Iris drone : https://rotorbuilds.com/build/27906 It allow to fix: - HGLRC M80 GPS - vifly finder 2 buzzer - Vista antenna mount To be printed in FLEX. Happy flight. Julien
The use of this caddy replaces the center shaft of the reels holder assembly entirely, if you currently use it. This makes it easier to replace reels and improves friction when the tape is pulled from flimsy reels (usually passives). This…
I made this caddy for two 2.5inch hdd sas drives for lenovo m800 sff.
I own a Bialetti style coffee cooker and a La Pavoni Europiccola. So a good coffee grinder is a must have. The Graef CM80 which I have is good enough for me but during grinding the coffee dust flies and sticks everywhere due to being…
A simple adapter to mount ECM8000 to a shock mount made for mics like the generic chinese BM800 you find on aliexpress. Outer diameter is 43.5mm, inner diameter is 21.1mm (ECM8000 is 21mm). There is a fillet on the outer edge indicating…
M80 New Logo Some think that M80 old logo looked better than the new one. I will let you decide. It can be printed in multi color eather in Bambu Lab studio, or in Cura by adding a pause in the layer tool, to shift filament. It can also…
A simple phone holder for the CM800 Microscope, prints in one piece and is applied to an extra phone back plate with Gorilla tape (Or thin foam two sided hobby tape would do) ensuring that the camera looks through the square hole. This…
Fits 4mm Aluminum standoffs that are 16mm apart. Designed for my micro LR Dave C Rekon 4 frame. Fits the TBS Antenna mount and HGLRC m80 GPS. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200…
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.
I made this simple modification to transform any BM800 condenser mic from a side-address microphone to an end-address microphone without the need to change the original 16.1mm capsule. It prints in one single piece and uses the same…
The BM800 (or BM700, NW800, NW700) is a popular base for microphone mods and rebuilds. Here's a bunch of files to help: A capsule saddle for the TSB2555 or JLI2555 capsules (or any other 26mm capsule) A replacement ring for the ugly…
HM80 HM90 Downside 4HDD
Funnel for Graef CM800 Spray with conducting paint to stop static electricity build-up!
Parametric OpenSCAD design to generate enlarger masks for Durst Bimaneg carriers. Print two to sandwich your film, or print one if you have a sheet of glass in your carrier.
Support GPS M80 Pro pour la frame Nord5 HD de Nordfpv
Additional height for NAC RLM800 lawn mower robot. Increases tension on loading contacts by liftong back of robot. Use original plastic screws to secure them into the base. Print Settings Printer Brand: Creality Printer: Ender 3…
NAC RLM800 back wheel replacement. Instead of badly working fixed wheel you may have pivot wheel as it should be from the very beginning and 99% of robots have it. Most (not all) of problems disappeared in my mower and its tested dirung…
Verstärkte Nachbildung der originalen Achskupplung einer 4mm Potentiometerwelle in einem Hameg HM8037 Frequenzgenerator. Wird sicher auch für andere Modelle passen. Die originalen sind oft gerissen und rutschen durch. Die Mittelstege sind…
These are anti-vibration feet for the Quamar M80E. I have my grinder on quite a hollow table and it was making quite a lot of noise, this is why I designed these feet to make it more quiet! I have had these in use for about 2.5 years and…
545214001 Handle Paddle Adjustment Lever - Part is NLA. This isn't perfect, but it works. I don't have the original spring, I just used a random one. It's a little tight and gets stuck, but still functions. Barely snug down the hold down…
OEM part is made of bakelite, and being over 50 years old now, it was too brittle and broke into pieces. I designed a 1 to 1 replacement (mk1 parts) and a new one (mk2 parts) bulkier and easier to print, with built-in cable clamp. If I…
These are anti-vibration feet for the Quamar M80E. I have my grinder on quite a hollow table and it was making quite a lot of noise, this is why I designed these feet to make it more quiet! I have had these in use for about 2.5 years and…
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.
