59 modeli
This is my mod of @WLCD_471142 s AWTRIX enclosure. Big shout out for his awesome work: https://www.printables.com/model/863847-awtrix-enclosure AWTRIX is an fun ESP8266 based IOT clock with lots of features: https://docs.awtrix.com/ It…
Inexpensive “martha tents” (mini greenhouses) common in amateur mycology often have wire shelving that is a bit to big to set a hygrometer on. This fast print hangs the hygrometer/thermometer from the shelving. These hygrometers are…
Another little helper for your power wall. Connecting a smarthsunt to the Lynx on the female side via 30 mm copper bar leaves some connections bare. Hence, a cover would be appreciated. Here it is, based on the original step file of…
My Smarthome Roomsensor Parts: Wemos D1 mini BME 280 BH1750 M3x6mm Screw I Use Home Assistant as Server and ESPHome to control the Sensor I send the Wemos into deepsleep and wake it every 5min for 30sec (dont forget to connect D0 and RST)…
This design is part of my Mushroom Grow Tent (Martha Project). https://www.printables.com/de/model/968799-300-grow-tent-for-mushrooms-overview ------------------------- ◾ 2023-12-23: Update your Martha with an even further optimized air…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) MARTHA - GHOST WITH HEART…
This is a compact enclosure for a SmartHome SunSensor to control shaders via HomeAssistant using an ESP32-C3 WLAN Controller and BH1750 Sensor. The sensor is powered via USB C port. The enclosure printed on PrusaCore One in two parts…
This design is part of my Mushroom Grow Tent (Martha Project). https://www.printables.com/de/model/968799-300-grow-tent-for-mushrooms-overview ------------------------- ◾ 2023-12-23: Update your Martha with an even further optimized air…
Saint Martha Crushing The Local Dragon Underfoot. Added UV Displacment for small details.
A simple holder for this cool SilverCrest Zigbee power strip. No supports needed, it can be printed with PLA or PETG
Gedruckt in PLA mit 3 Konturen. Hält schon seit 1,5 Jahre sich unter dem gewicht zu verformen.
I designed this box for a Wemos D1 Mini powered smarthome remote. Here is the short list of the specific parts I used in this project: Wemos D1 Mini:…
This design is part of my Mushroom Grow Tent (Martha Project). https://www.printables.com/de/model/968799-300-grow-tent-for-mushrooms-overview ------------------------- 2024-07-18: Created an extra controller for plants/cannabis that…
This design is part of my Mushroom Grow Tent (Martha Project). https://www.printables.com/de/model/968799-300-grow-tent-for-mushrooms-overview ------------------------- ⚙ ➡ 🍄 In this YT-Shorts-Video -1 I will show you how to use the Jar…
Cell Phone Holder Height 4.5cm. Suitable for placing in front of the keyboard.
I designed this model as a simple stand for devices such as e-readers, tablets and smartphones. It is easy to print and doesn't use a lot of filament. Fits 3 devices up to 13mm in thickness. Print instructions: Supports: No (just don't…
Description Based on @mattmaltarich idea i build my own rugged phone holder for my Ktm 890 Adventure. The size is for Ulefone Armor 14 Pro but I attach fusion 360 project so you can make your own. I needed a very resistant support , which…
First Model i made for my Skadis. Simply 2 "Rings" which can hold the Powerstrip. Printed with Sunlu PLA+ at 15% Infill.
lightswitch cover for TRADFRI IKEA smarthome switches and buttons. Stop your familymembers and friends from turning off your smart lights the wrong way! No tools required!
A contract using my modified dolly to make a custom figure. Print instructions Unassociated tags: 1/48 Category: People
Celebrities - Martha Stewart 3D printable model.
Stop your Family from switching off your smartlights! For renters, no tools required.
This is part of my serie of printable band logos. This one as a background to keep the lettering together and gives more control if you want 2 colors Open to requests Category: Signs & Logos
You can find a blog post article here . I used the multi-catch mouse trap as a base, added a magnet hole to the inner flap and a hole to the lid to attach some ESP32 dev board, USB charger and a LiPo battery to detect the trap of a mouse.…
After printing the item, remove the middle supports (see photo below) squeezing it with your fingers or with the help of a cutter.
A coaster that I made for a friend with the Logo of Amon Amarth. It is made to printed with a color swap.
I made some upgrades to my "garage all-in-one" smarthome device. So I had to make an updated enclosure for it. Here is the list of the parts I used in this project: Wemos D1 Mini:…
I designed this enclosure for an esp8266 powered all-in-one smarthome device. Here is the list of the parts I used in this project: Wemos D1 Mini:…
Adds a better W flap. And a degree flap (instead of “:”) for Smarthome extensions.
With a Shelly Uni you can controll some Smart Home Devices when a Alarm is going in to the Swissphone LGRA Charger. I use the Shelly Uni with HomeBridge and Apple Home Kit to turn on the lights in my house and open the Garage. You need…
Usefull to replace a smartphone specific Brodit holder on an existing Brodit clip mounting point, this holder can hold most smartphones. Use of an elastic to keep the arms tensioned against the smartphone might be recommended.
Telekom SmartHome Base 2 Wandhaterung
Supporto per termostato Bticino Smarther2 per montarlo su scatola 503, modello da parete. Per poterlo fissare servono due inserti filettati in ottone M4 come questi in link:…
I remixed the original (really cool!) thingy and put some MDI icons on it to make physical Buttons for my Homeassistant automations.
Made from eggs' packaging. Scissors but not 3D printer are required this time. Or you can use your 3D printer, too :-) Print instructions Licence: Creative Commons - Attribution Category: DIY
Looking to DIY an esp8266 powered smarthome device that reads temperature, humidity, luminance, microwave motion, and outputs to a relay and a beeper? You found a great place to start... or finish it. I designed this enclosure for a smart…
Helps with storing and retrieving 4 commander decks in the Ultimate Guard Smarthive 400+ without the issue of having the other deck on that side spill over. https://ultimateguard.com/en/Boxes/Smarthive-Xenoskin/UGD011122/ auto desk file…
A modern looking desk lamp using a WS2812B LED-Strip with 60 LEDs/m and a ESP32 running WLED so you can use this Lamp as part of your smarthome. The Lamp is bright enough to use for things like reading or just lighting up your room…
Here you can get the case for a ir-remote control. This case can hold a pcb and an ESP8266 for installing it in front of an stereo or TV system and control the system with infrared commands that will be send to the ESP8266 over WLAN in…
Wandhalterung für die HAZET Smartholder Bithalter
Stop your family and friends from switching off your smartlights! For renters, no tools required.
Halterung für Trockenbauwannd Damit kann der bestehende Schalter durch einen Magenta SmartHome Wandtaster der Telekom ersetzt werde
Any filament type of your choice Model need 7 gram of filament Using 3x6 mm magnet.
It's simply a cookie cutter in the shape of the Marthas Vineyard Museum logo
Hi, You will find here an adapter for the OUILA LED CEILING LIGHT. Its a 18W LED light. The adapter uses 2 wholes for mounting it to the wall, because the lights are very light :D You just have to insert the 3 M4 nuts from the backside.…
Deutsch [English below]: Ich wollte ein kleines Display haben auf dem ich morgens und abends im Badezimmer eine Übersicht über das Wetter der kommenden Tage und rudimentäre Informationen aus dem SmartHome ablesen kann. Hier ist natürlich…
This part allows to replace the stock mounting bracket which is just a bent piece of steel. With the stock bracket, the Lamp has to be mounted next to the flush-type electrical box ("Unterputzdose" in german). This now allows mounting the…
Simple slide on lock to keep the kitchen helper shut.
This box is used for home automation e.g. Home Assistant after a pager alert As soon as an alarm arrives on the pager, the state of the Shelly is switched Subsequently, it can be reacted to (Light on, gate open, ...) It was integrated…
My first upload and share. I am using this to decorate wooden box lids I am making. I haven't perfected it yet.
Replacement foot for Martha Stewart Aluminum Chair. Best printed in PETG or ABS, but workable in PLA.
Dieses DIY Power Supply ermöglicht die Steuerung von Wechselstrom-Steckdosen über Relais, die per Fernzugriff an- und ausgeschaltet werden können. Es ist ideal für die Integration in ein Smart Home System und bietet eine einfache Lösung,…
Made a stand for my old Kindle Fire tablet so I can use it as a small display stand for some Home Assistant information. I think every 7" Kindle should match with a width around 115mm I rooted this kindle and installed LineageOS, then I…
Dies ist eine Möglichkeit seinen Fenstergriff kostengünstig smart zu machen. Benötigt werden: 2 x Moes Fensterkontakt 1 x Magnet 8x3x2 mm 3 x Einschelzmutter M2 3 x Senkkopfschraube M2 die Fensterkontakte von Moes sind, nachdem man das…
the YAY file is the original but it has squared off wings the better wings model has a back end that is not as nice... I shall blend them when I come back from holidays
Screw the mount to the wall using two screws, drag the ethernet and power cables through and attach to the Smarthub. Then just snap the hub into the mount. Print with tree (organic) supports for even nicer overhangs.
Hi, here is a dual hose adapter for a ForceClima 9150 smartheating. On a portable air conditioner with an exhaust pipe, the indoor air is used to cool the hot radiator. That air after getting hot too is thrown out. The problem is that in…
Screw the mount to the wall using two screws, drag the ethernet and power cables through and attach to the Smarthub. Then just snap the hub into the mount. Print with tree (organic) supports for even nicer overhangs.
Any filament type of your choice Model need 7 gram of filament Using 3x6 mm magnet.
