55 modeli
As an experiment in transparent printing, I embossed hexagons into the lid to make it half as thick except for the ribs between the hexagons, and printed in 3D Printing Canada PC+ Transparent filament using a max of 20 mm/s for the bottom…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A small battery cover for my caliper Print instructions I print this one in PETG with the flat surface on the build plate without support (they were too hard to remove and I broke the small legs). Instead I trimmed the legs with an exacto…
Hex Sockets Mastercraft Hex - 3/8 inch drive for Metric Infill: 15% Resolution: 0.2 Filament: PLA OR PET-G
Print in PETG with 20% infill and 3 walls I recommend using snug supports Imprime en PETg avec 20% de infill et 3 perimètres je recommande d'utiliser des supports Snug
All the caliper holders I could find for the HSW were designed around the digital varieties. My analog version is much slimmer and didn't fit very well, so I came up with my own. Fits the Mastercraft Vernier Caliper ($10 at Canadian Tire).
Lost the battery cover for my older sliding caliper from Canadian Tire (Mastercraft). Designed a new one in Tinkercad a
Created on auto cad. Printed in PLA at 25% infill. Use either under shelf or mounted on wall.
Tool holder for mastercraft maximum 20v tools (drill, flashlight, etc.) Printed in PLA with 25% infill Supports required.
Holds the cheap plastic Mastercraft speed square from Canadian Tire.
Hex Sockets Mastercraft Hex - 1/4 inch drive for Metric Infill: 15% Resolution: 0.2 Filament: PLA OR PET-G
I use this cheap kit to fix small scratches on my car but using the box to store them has always irritated me. This parametric organizer can be customized to fit other uses but is purpose built for this exact kit. It is sized to fit on a…
printed with pla works great for small screwdrivers
1-4 Mastercraft socket organizer for gridfinity All text is 4mm size and 1mm height above the rest, seems to be the sweet spot for my lil' Ender 3 V2 Metric v2 holds shallow sockets of sizes; 4mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm,…
Clip on. No magnets. Hook the soft jaw under the normal jaw, tip the soft jaw down. Give it a tap on the top surface with a hammer and it clips onto the normal jaws. Close the vise to seat them. Not sure if they will come off easy,…
This is a simple wallmount designed to fit Mastercraft laser thermometers and uses two screws to hold it up. Note Designed for #6 wood screws, up to (7.25mm Head, 3.3mm Shaft, 80°). Printing Recommendations Should be printed with the side…
Works only with the Mastercraft 60 drawer cabinet sold at Canadian Tire. The other ones have different sized drawers that won't fit it.
Simple vertical stand for cheap Mastercraft vernier caliper. Model # 058-1647-0 Has a loose fit for ease of use Uses Le0Michine's Fusion360 Gridfinity Generator https://github.com/Le0Michine/FusionGridfinityGenerator
These are made for MasterCraft and similar socket sets to fit into my toolbox Gridfinity system. These are the yellow ones in the picture. I will have more 3/8" sets coming including; Metric Deep and Shallow socket sets. Please keep an…
I recently bought a planer that didn't come with any sort of shroud to hook up to a vacuum to keep the dust and wood chip mess to a minimum. I have split the long parts in half so that they would fit on a normal printer bed size. I…
Mastercraft Framing Nailer, 3-1/2-in. Internal seals. Print with TPU 95A. Piston Chamber Seal may need a light wet sanding to create a favorable mating surface for an air tight seal.
This is just a simple model I created as I'm learning how to do 3d modeling with 360. Feel free to modify at will
Table saw fence locks for Mastercraft #055-6737-2. One of our saws was returned with a broken part. Instead of scrapping the tool, I modeled and printed a new one. I've included two stl's. One is the foot piece as it was made, and the…
simple hose adapter between a Mastercraft belt/disc sander and a standard Ridgid shop vac.
Due to carelessness, I dropped the storage box that holds all of my filament and managed to break the latch handle that keeps it closed. Not wanting to go through the hassle of bringing it back and claiming the warranty, I decided to…
Soft Jaws for 5" Mastercraft Maximum Vice.
Single-DIN radio trim plate for MasterCraft Maristar.
Try not to print with brims, if possible use rafts. you can use 30% infill for the base but for the actual screwdriver holders 100% is recommended
These are all the parts I modeled to make my own dry box. Other Parts Required for Dry Box Mastercraft Sealed Bin Silica Gel Desiccant 1 ½ abs pipe PC4- M6 pneumatic fittings and PTFE tube
A simple press fit bushing for Mastercraft routers. I printed it on fine settings with tree support, as this model needs to be very precise to press fit.
Simple battery cover for Mastercraft toy tool batteries. Only needs support where the little tab is.
These are liner/dividers for organizing the plastic drawers in a Mastercraft drawer cabinet. I'm using them to store screws and other hardware. The dimensions are 67mm x 51mm x 30mm tall. 0.6mm nozzle, 0.3mm layer, PLA, Sovol SV01
This is a gridfinity tool holder for the mastercraft digital calipers. 2X6 Grid
2x4 holder for a full 4 piece set from Mastercraft!. Possibly one of my favorites I've designed so far, the dimensions are quite pleasing. Works a treat! Step files included for modifications.
A simple holder that goes on the Multiboard. Helps a lot to keep it's box of extra blades. The Cutter I used is a folding blade knife from Mastercraft. I used the following parts to hold it in place: Heavy Weight-Bearing Hook Snap Small…
Back knob for Mastercraft 55-6802-6 Compound Mitre saw. Modelled in Fusion360, printed in PETG.
gridfinity holders for mastercraft pliers and side cutters from this kit https://www.canadiantire.ca/en/pdp/mastercraft-comfort-grip-pliers-set-micro-chrome-finish-8-in-3-pc-0584785p.html?rq=pliers sidecutter model # 58-4587-4 needlenose…
I found the wireless charging dock on newer Mastercraft boats to be too large for my iPhone 12 Pro, it would tip over or move to the side and the charging would stop. This spacer will better centre the phone over the charger and allow it…
Was pleasantly surprised when i saw this tool still came in a steel case, but that doesn't mean it doesn't need its own holder! As it was juuust too large for a 1x4, rather than waste space i tossed in holder for eight additional impact…
If you do not have the space the wire wheel is too close and the nut will not have enough threads to hold the wheel on if the spacer is to big the wire wheel is too far out and will hit the outside cover and not spin due to the friction…
Use this on your Mastercraft orbital sander for dust collection that's way better than the little box it came with. You will need to trim the little lip off the sander at the connection to get this to fit flush.
This g-code file is specific to a Prusa Mini/Mini+ If you are printing in Orange with Black text then you'll need to: Start with Orange filament loaded on your Prusa Mini/Mini+ About 8 minutes after starting your print from the g-code…
Strap this bracket to your model to mount to the Mastercraft MOD system.
Anyone that has this bandsaw knows that while it's nice that this affordable saw has guide bearings, the bracket for them is too deep making the bearings to far forward and allowing them to come in contact with the blade teeth. This part…
Mastercraft, Wallmaster or any keyhole type storage - large hook
My lawnmower on switch broke and I lost the part that fell off. Using Sketchup, I was able to recreate the handle and tested. Works great! Printed with PET-G, with minimal branch supports and 40% infill.
The holder has a perfect fit for to dhe drills, impact tools and the like. Features various mounting holes for #8 flat head screws, or #8 round head/socket head screws.
Remixed a model from Grant@GranitWorks to make it work with my Mastercraft belt sander. Print with the flange contacting the bed. Use supports (contacting bed only) and a large brim to prevent tip over. I printed with PLA at 0.2mm layer…
Gridfinity Holder for a Mastercraft Temperature Reader
switch cover, press drill mastercraft
Bought a set of Mastercraft (Canadian Tire Brand) Chisels and wanted to hang them on my tool shelf. So this exists now. Clicks into place. Wish it came with one CANADIAN TIRE‽ I have included the Fusion 360 File if you want to make your…
Remixed a model from Grant@GranitWorks to make it work with my Mastercraft belt sander. Print with the flange contacting the bed. Use supports (contacting bed only) and a large brim to prevent tip over. I printed with PLA at 0.2mm layer…
This is a gridfinity tool holder for the mastercraft digital calipers. 2X6 Grid
Use this on your Mastercraft orbital sander for dust collection that's way better than the little box it came with. You will need to trim the little lip off the sander at the connection to get this to fit flush.
gridfinity holders for mastercraft pliers and side cutters from this kit https://www.canadiantire.ca/en/pdp/mastercraft-comfort-grip-pliers-set-micro-chrome-finish-8-in-3-pc-0584785p.html?rq=pliers sidecutter model # 58-4587-4 needlenose…
____________________THIS IS DIGITAL PRODUCT___________________ ______________________NON-REFUNDABLE_______________________ ___________________STL FILES FOR 3D PRINTING___________________ Ready to print Mastercrafted Susser Dagger from…
