Gartenzaun "Doppelstabmatte" Halterung für Schilder
Eine Halterung für das Verschrauben von Schildern oder anderen Dingen an einem Doppelstabmattenzaun.
- Pobrania
- 255
- Polubienia
- 28
- Ocena
- 0
329 modeli
Eine Halterung für das Verschrauben von Schildern oder anderen Dingen an einem Doppelstabmattenzaun.
A black neighbor kept having their BLM sign vandalized. Literally dozens of times. Regardless of your political views, the vandal was at best damaging personal property in an attempt to suppress free speech. Anti-democracy fascist. F—…
This is a very simple coupling clip that can fasten two MatterHackers 1KG spools together. Installing these are difficult due to the small spaces involved and the sharp unfinished spool's inner walls. So do take care. Caveat: Due to…
I wanted a non-destructive way to attach two MatterHackers 1KG spool together after finding inconsistencies with the inner structure of various spent spools I've accumulated over the years. I want to be clear, this is ridiculous for the…
I reworked this through several iterations, and am finally happy with this iteration. I recommend not using ironing to smooth in your slicer, since this has small features that get gummed up pretty easily. Pin is ~19mm wide x ~23.6mm…
Description This 3D-printed enclosure allows you to add smart control to your Hunter Douglas / Luxaflex blinds using three smart switches , enabling wireless Open , Close , and Stop functionality. Unlike the official setup, this design…
Progettato pensando alla risoluzione dei problemi, Phil ha diverse funzionalità specifiche per mettere alla prova la tua stampante. Queste caratteristiche includono: piccoli dettagli inseriti, piccoli dettagli in rilievo, sporgenze,…
Vidéo tuto :
Intro Tiny, functional pillbox designed for the one pill that matters most. This ultra-compact container fits a single pill perfectly and clips right onto your keyring — ideal for daily medications, vitamins, emergency pills, or any…
Das ist ein Halter für die Matten von meinem Plotter. In der Mitte befindet sich ein Loch um es mit einer Schraube zu befestigen. Ich habe das PLA+ mit 205 Grad und 65 Grad gedruckt. Die Ecken sind abgerundet und passen sich super an.
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
I made this spikes for accupressure mats. Printed with PETG 0,2mm 100% infill. Sew or (hot)glue the spikes onto a thick soft towel or pillow. Use on your on risk! You can injure yourself.
This is a modified version of the original deck box to fit Ultra Pro 3" x 4" top loader card protector for the commander card and slightly increased in size to accommodate Dragon Shield Matte sleeves for the rest of the deck. The…
Do you like it? Please consider to buy me a cup cup of coffee . That would make my day! UPDATES 2023-05-05 Do you want to replace the cap with a shutter? Then have a look at Thomas1234 shutter:…
TinyMtn Free Pack 14 - Alps This is a package with sets of 3D model files for four iconic mountains in the Alps. Mont Blanc, 4810 m / 15,781 ft Eiger, Jungfrau, Mönch, 4158 m / 13,642 ft Matterhorn, 4478 m / 14,692 ft Monte Rosa, 4634 m /…
I was tired of paying a lot of money for a really nice, and light weight Mattebox for a gimbal or steadicam So I made this! Hope you like it, I worked really hard on it. Print instructions Hey friends! I moved this over from Thingiverse…
There are tons of matte boxes on the market, and it seems that every month a new design is released for the prosumer segment. But none of them satisfies me for my small cinema rig, so I decided to design one myself. This was my wish list…
This striking black panther figurine captures the power, motion, and elegance of a panther mid-leap. Crafted using high-quality matte black 3D printing filament , the smooth surface and flowing lines emphasize the dynamic form and…
3D Model of the Matterhorn (Mountain in Switzerland). The model is based on Google Maps Data.
This adapter system wraps the edges of a CREALITY CR-PLA MATTE 1kg 199x68mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable…
The mounting point tore out of the car mat. Made a replacement. Worked for the last 3 years (on my VW Golf 6). Material: PETG Orientation: both parts on the flat side Old New Works by friction fitting the mat material between the 2 parts.…
Fußmatte als Ergänzung für mein Wichtelhaus: https://www.prusaprinters.org/de/prints/101671-wichtelhaus-fur-weihnachten-imp-house
Section of the Matterhorn according to swisstopo data
This is a protective insert for loaded filters in a matte box. In most cases, a piece of camera tape is placed on the backplate of the matte box to indicate that the matte box is loaded with filters. This print will help protect the…
( this is a mirror of my original cults3D listing ) Use these donuts to step-up your lenses for your 114mm mattebox, like the smallRig 2660 or my very own Kompi v3 For now there are a few sizes (the rainbow-screenshot doesn't get updated…
A bunch of fillter tags for camera assistant. You will find the pre-made stl for following filters : Black Pro Mist Black Diff Clear Classic Soft Glimmer Hollywood Black Magic IRND ND Soft FX White Pro Mist Glimmer Bronze I also uploaded…
The Matter3d spools are a bit smaller than all the other variations I've seen. I resized the original fusion file in Blizzards model to “197mm” diameter and it fits like a glove. Update March 24 2023 : I received a spool that was too…
antimatter container light can be printed on any 3D printer, because the model is designed to fit even on small printer surfaces and can be printed without functions such as colorprint, multimaterial print, and each part can be easily…
This part is designed to attach the "Burg Wächter Journal 5867" mailbox to a double rod mat fence. Other Mailboxes may work, too but it's not tested. (All Mailboxes, where the horizontal mounting holes are 6mm wide and 184.5 mm apart…
This is a modified version of the original deck box to fit Ultra Pro 3" x 4" top loader card protector for the commander card and slightly increased in size to accommodate Dragon Shield Matte sleeves for the rest of the deck. The…
Matterhorn, one of the most spectacular mountain in the world. Build its model in your sandbox. Whether just for fun and play or for educational reasons. Learning about geography will be more fun for children. Model your own Alps in the…
Print it with PETG , because PLA dissolves more easily in water. GREAT FOR SHRIMP / CORY There are a lot of people in Germany who threw their Eheim Filters away and went for the internal Mattenfilter solution. Following the forums over…
Introducing the new MatterHackers mascot: Phil A. Ment! Designed with troubleshooting in mind, Phil has several features specifically to put your printer through its paces. These features include: small inset details, small embossed…
Hi! Did the DP or Gaffer hand you a last minute Aputure MT Pro to put on the camera as an eye light? Sure you could use an arm, but that just adds weight and complexity. Introducing the LMB comb for the MT Pro. Inspired by CineTape…
This jet-lift air collar implements well-established air-lift / jet-lift principles commonly used in Matten and sponge filtration systems, adapted specifically for 3D printing and home use . The design consists of two interlocking parts ,…
Matterhorn mountain no surprises. Fully manifold too!
Hi everyone, I’m sharing a file designed for all 4x5 Arri matte boxes (such as the LMB 5 and others). It helps block excess light when the flags don’t provide enough coverage. These files are intended for use with spherical lenses.
Es kann sein, daß es da unterschiedliche Varianten gibt. Ich habe leider keine Teilenummer oder so. Ggf. mit Support drucken.
3D map of Zermatt valley and Matterhorn in Switzerland Category: Art
This is a 3D printable wall mount for the Mattel Brick Shop Hot Wheels ’90 Acura NSX. It may also work with the other Elite 1:16 scale models. It mounts to the wall with 2 screws and has a display shelf for the 1:64 scale Hot Wheels that…
Matterhorn Switzerland tile (ore tile for Settlers of Catan) Designed to be joined to a base. Clint Boyle Holly Springs NC Category: Games
Just a few tags to stick on the mattebox whenever the AC changes camera filters
Matterhorn 3D model I really like 3D terrain models of high mountains. After a long time I managed to get this Detailed terrain 3D model of probably the most iconic mountain in the Alps - Matterhorn from the Swisstopo source. The model is…
A simple Mattebox for LWS system. It can be configured with multiple hoods, lens spacers, and filter holders up to 150x100mm (4x6") Will update regulary with modules and accesories. There is also a version with 16mm (5/8") mount to use…
This model shows the white matter of the human cerebral cortex in the right hemisphere, with the grey matter included as well in the left hemisphere. Also shown in this model are the white matter tracts that cross between the hemispheres…
As I said, mattebox doesn't come with 52mm filter thread, smallest one is 67mm I think. Anyways, it works and now I can use my lens wide open
Created for April Fools Day 2020 video: I used 1.75mm PETG filament as the pin the hinges for the flags.
This model adjusts a few parameters specifically for Matter3D cardboard spools (non-corrugated). The main differences are Inclusion of four reinforcement areas that correspond to where the cardboard spools are often warped Sized for…
I realize that this gives non-manifold errors. I am not sure how to properly create holes in a model and additionally, the hoop and backboard connection as soon as they touch becomes non-manifold. I've given up and accepted this is as…
Unterteil für Opel PSA Fußmatte Clip Print in PETG 0,2mm no support Infill 50 % Gyroid V3: No need for scaling like in V1. V3 has optimized threads in “Oberteil v3.stl” and fits to “Unterteil v3.stl”. V1/V2: When using “Unterteil.stl”…
This is a replacement turntable for the Matter and Form V1 3D Scanner. I purchased two of these scanners used and both had issues with the guide bearings. The pins they snap onto had been broken which resulted in the turntable having a…
Einlage für eine Goldwaschrinne mit mehreren Ebenen. Maße : 250x250x2mm & 200x250x2mm Infill: 15% Material : PLA
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
I needed an enclosure for the the PMS5003 Particle sensor that would meet my needs: slanted roof so rain/moisture rolls off mesh covered inlets to prevent critters from making a home inside anchor points for screwing into a pole / wall…
Modern robotic arm sculpture inspired by industrial automation and precision engineering.
Family Matters - Steve Urkel - 1989 3D printable model.
Neue Version für die einfache Entnahme eines SwitchBot Matter Realais zur Halterung auf eine DIN Hutschiene Version 2.0 (mit Herausnahmewerkzeug) SiwtchBot DIN-Halterung für: SwitchBot Relaiy Switch 1 SwitchBot Relaiy Switch 1PM In dieser…
Filter Tag options: - ND (0.3 - 2.1) - Black Pro Mist (1/8 - 5) - Glimmer Glas (1/8 - 5) - Soft (1/8 - 5) - Black Satin (1/8 - 5) - Gold Diffusion (1/8 - 5) - Pol (single) - Clear (single) - Diopter (0.3 - 1.2) - ALL filters as a .zip
Tired of digging through powder avalanches to find your scoop? 😅 This holder is designed exactly for the new MoreNutrition Chunky Flavor jars – because all the models I found were either too big (for the large jars) or made for the old…
Il nome, da fare in due colori, ci sono due file, con e senza astine (per infilzare nella torta)
The frame is printed in PLA with 0.15 resolution (sunlu matte black) while the lock is printed in PETG, because of small walls and mechanical needs. With my printer the frame is a snug fit for the focusing screen, The walls are tapered…
This is a custom matte box designed for the Logitech C920/C922/C930 webcam, remixed to include a “hook” that securely attaches the matte box to the webcam. The hook ensures a snug fit without requiring any adhesives or additional support,…
This is a square corner remix of the Darkmatter Skirts by MasturMynd.
Figure stand for the secret wars figs from the 80s. I added a little thingy on the front to hold the shield. I printed mine in clear PLA with only 15% infill. Red looks decent too for the figures with red feet like Cap, Iron Man,…
3003 Fantasy Bits Mega STL Collection on Kickstarter 🔥 Want to stand out in the 3D printing market and attract more customers? 🔥 Now’s your chance to sell unique, stylish, and modern 3D models that will impress everyone! 😍 By purchasing a…
Wie so oft im Leben - meine Frau hat sich einen Halter für den Gartenzaun gewünscht um ihre Blumen aufzuhängen. Das ist dabei entstanden. Der Halter ist für 8/6/8 Doppelstabmattenzäune designed und kann auch mit Sichtschutzstreifen…
If you have any of the old 70's Mattel Electronics sports handheld games this is a replacement battery cover for them. It was designed off a Mattel Electronics Baseball game but they all used the same cover. Print it in the closet color…
Fourth sculpture from series study of matter. Minimalist structure which must be print without supports. Filament will move in random way, co they will create new structure every printing. NO SUPPORTS! Dont make remixes. Support me:…
DIY Custom Matte Box A DIY 3D-printable matte box designed for custom camera and lens setups. The mounting system can be adjusted to fit different lenses by modifying the lens adapter dimensions to match your specific lens barrel. The…
A holder for the new remote of the M1 Matter Light strip from Govee. The bracket can be glued or attached with two screws. Eine Halterung für die neue Remote des M1 Matter Light strip von Govee. Die Halterung kann geklebt oder mit zwei…
This is a design for drawers that fit in the MatterHackers build series spools. I designed them to save as much plastic as possible. It comes with 2 hole guides. One is placed on top of the spool to align the top holes. The other is lined…
Published by Matter Hackers (M3D), they published it to OneDrive, thought it would be easier to find here.
81mm 80mm 85mm
Wurde in PETG gedruckt mit 3 walls und 20% infill ohne Supports auf einem Creality K1. Würde mehr Walls oder ein Steiferes Material wie ABS / ASA Empfehlen. Jedoch funktioniert es auch in PETG ausreichend gut. Der Winkel kann mit…
Sigma EF 18-35 Filter Adapter for Mini Matte Box I made this 114mm filter adapter to use my Sigma EF 18-35 with the 4x4 square filter holder or compact Mini Mattebox from here: https://www.thingiverse.com/thing:4781627…
passender Deckel für Pfosten, Doppelstabmattenzaun gedruckt in PTEG, Infill 15-20%, kein Support
Im G-Code wurde eine Druckpause hinzugefügt um den vorhandenen Gurt in den noch offenen Bügel einzusetzen.
Hey Folks, here is a clamp adapter for cinema lenses with a 100mm front diameter. I use this in combination with the wooden camera UMB-1 and was modelled after the adapters that came with that kit.
English This set replaces the original clips for the floor mats if they have come loose from the vehicle carpet. Unfortunately, Renault does not offer a suitable solution in this case. Please note the licence conditions for the set below.…
Create your custom nametag entering your name and surname From one specific point of view, you will see your name, from other your surname, and for the rest you will see strange figures :-) This project is a Python script that generates…
The enclosure consists of two parts. Top part with four holes: two holes for leds and two holes for reset button and user button. The bottom part is mounted with a press fit. There is a small hole in the bottom part that allows…
Lichterkettenclip für Doppelstabmatten-Zaun Anstatt jedes Jahr Kabelbinder zu verbrauchen, wollte ich etwas Wiederverwendbares haben. Der Clip klemmt stramm aber beweglich auf den Querstäben von einem Doppelstabmatten-Zaun, das Kabel der…
Scaled up from original model to fit the Mattel Brick Shop Elite Series brick sets. Can be scaled up to 330mm long (flat part the car sits on) to fit Premium Series cars too. Cylinders should be negative volumes if not already by default.
Sigmar 18-125 lens hood like eng/efp camera Print Settings Rafts: No Supports: No Infill: 80% Category: 3D Printing
Inspired by this NSX wall mount.
Family Matters - Steve Urkel (Jaleel White) - 1989-1998 3D printable model.
This is a two-tone, color changing, crystalline dice vault! 3D modeled from scratch with many angles to catch the light and really showcase the beautiful dual-color Matter Hacker Quantum color changing filament! It also has a neat…
Halterung für einen Niederschlagsmesser an den Zaunpfahl eines Doppelstab - Mattenzaunes Niederschlagsmesser mit 5cm Durchmesser ( unten vor dem erweiterten Hals ) (die Abschlusskappe bleibt drauf) Messer aus Glas:…
The perfect companion for anglers who enjoy a cold drink while fishing! This 3D-printed koozie features an integrated hand fishing line holder, combining convenience and functionality. Keep your beverage chilled and your fishing line…
Gray Tool Decoration
Family Matters - Carl Winslow (Reginald VelJohnson) - 1989-1998 3D printable model
Family Matters - Laura Winslow (Kellie Shanygne Williams) - 1989-1998 3D printable model.
Knob Latch Options No gasket on door “enclosure-latch_normal.stl” Gasket on door “enclosure-latch_taller.stl” Basic knob without finger turn tip for either latch “enclosure-knob.stl” Knob with tip for easier turning…
Drawers that can be installed into empty MH Build filament spools. Includes mechanism to lock the drawers closed; you push down on the tab to unlock and open the drawers. Designed and tested for MH Build spools, probably works on other MH…
In board game Stationfall there is only a token for a antimatter. This antimatter looks like that one on that token. Useful when you have 3D figures for this game. To print from STL make the object bigger 606% to have dimensions…
For the camera homies! I use these to protect filters that remain in the mattebox when not in use. Easily modifiable to your desired lens size via ‘Change Parameters’ Menu. You will have to change the text by opening the sketch. Cheers!
Insektentränke zur Montage auf einen Gartenzaun "Doppelstabmatte" 5cm Durchmesser 5cm Abstand der Stäbe... Die Tränke kann einfach auf den Zaun aufgesteckt werden. (Siehe Bild). Dank des eingelegten Siebes kann kein Insekt ertrinken. Das…
A printed alternative to the original Wooden Camera Hardmattes for their UMB 1
The famous swiss mountain Matterhorn as silhouette as seen for example on the Toblerone logo.
Basic terrain model of the Matterhorn in the Swiss alps. 4478m brought to your desk. Best printed with 0,16mm layer height and 15% infill.