1065 modeli
UPDATE: 2022/12/14 No changes in this update, just a big thank you to everyone that's downloaded, posted a make, remixed, or re-shared this model! This was only the fourth model I shared and was the first ‘big project’ I took on while…
Wydruk około 1,15 €–1,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Metric Screw and Nut Measuring Tool This is a remix of the great measuring tool from cmh . Link: https://www.prusaprinters.org/prints/38356 Remix Information I added hexagonal holes on the back to measure the nuts of the corresponding…
Wydruk około 1,65 €–2,02 € nettoWstępna wycena jednego wariantu
This is the remix of the Rapid Metric Screw Measuring Tool (M2-M5, up to 50mm) from @fivesixzero. This is a SLIM version - shorter printing time, less weight, slim design… but top quality stays untouched! :) Remixed Things I made few…
Wydruk około 1,50 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Since I did not manage to adapt the parts well to my caliper by scaling, I have designed them from scratch. It now fits for my caliper which is 3mm thick. Because I noticed that there is a slight offset to the reference plane (zero…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix of @Boogie. This remix is compatible with MMU This tool can measure M2-M10 screws with a length of 4-120mm
Wydruk około 4,75 €–5,81 € nettoWstępna wycena jednego wariantu
Easy tool for measuring TCP and Base on robots. Positioning with magnets. Thanks to strong magnets and lightweight plastic, there is no displacement when touched. Each attachment has a screwdriver hole in it, in case the thread in the…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Thought the versions that existed were lacking by either being too big to keep in a tool belt or didn't have common screw sizes over M5. Also made a version with common pneumatic couplings that are commonly used in my industry. Printed…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
I designed the holders so that the measuring coils are neatly in one place in the control cabinet. A lower (2.stl) and an upper (1.stl) part are screwed together by 4 screws. 4 M3 nuts are pressed into the lower part. The holder holds…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu
Based on the idea of the user Sneaks i made a measuring tool for metric screws. This tool can measure screws of length from 5mm to 120mm. Color change for the letters & numbers If you dont want to paint the letters you can add a color…
Wydruk około 3,29 €–4,03 € nettoWstępna wycena jednego wariantu
This small 5 ml measure can be easily stored in the product container. It is easily printed in PLA or PETG. No support required. Please, like my 3D model and/or download it, a small gesture that will perhaps earn me a few Prusameters.…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena jednego wariantu
Dog sitting for my son for two weeks. He didn't have a scoop for the food, just said 1 to 1.5 cups twice a day. So I have to make a scoop for her food. Printed with PETG at 0.2 with paint on supports (automatic painting) and a variable…
Wydruk około 7,58 €–9,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
5 ml Meßlöffel für Flüssingdünger Hier ein kleiner Meßlöffel für Flüssingdünger. Die Füllhöhe bis zur Markierung ist 5ml. Mittels des Lochs im Griff kann man den Löffel aufhängen. Schichthöhe = 0,1mm Translation DeepL 5 ml/ (0.30512 in³)…
Wydruk około 0,76 €–0,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
With this bandsaw jig you can measure if the saw is parallel to the fence. You need a 10x2mm magnet (2mm thickness), which is glued into the hole with super glue. When mounted to the blade you can check whether the fence is parallel to…
Wydruk około 1,74 €–2,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Der Messlöffel ist mit Markierungen für die Füllmengen 10 ml, 15 ml und 20 ml versehen. Wir nutzen ihn, um den Reiniger für den Saugroboter abzumessen. Zur Erinnerung sind die Füllmengen eingedruckt. Der Löffel passt bei Nichtgebrauch gut…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You don't need to be that precise when sowing your seeds, nonetheless, I like to be consistent with my sowing depth. The larger end of this dibber has 5mm increments. Push in to soil up to a line, the number visible above the line is your…
Wydruk około 1,46 €–1,78 € nettoWstępna wycena jednego wariantu
Wer häufig eine Nasendusche verwendet, macht dies üblicherweise mit 0,9 prozentiger physiologischer Kochsalzlösung. Diese kann man teuer kaufen oder einfach selbst herstellen: 9 gramm Salz (idealerweise naturbelassen ohne Rieselzusätze)…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Termomix TM31 cup My original mug fell and cracked. So I decided to make a similar model with the same dimensions.
Wydruk około 3,08 €–3,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A tool to make always the right amount of spaghetti. Try it out for yourself amd maybe print it bigger or smaller, whatever fits your needs.
Wydruk około 1,28 €–1,57 € nettoWstępna wycena jednego wariantu
Odměrka na kávu, cukr a podobné sypké hmoty (Measuring cup for coffee, sugar and similar loose materials)
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
This is a pocket sized tool for measuring small diameters (2-10 mm). It also has 0.5 cm and 1.0 cm gradations on one side to use as a ruler. Design features The current version has 5 diameter openings from 2 mm to 10 mm, and a 5 cm ruler.…
Wydruk około 0,24 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
0.2 mm layer 4 walls 10 - 15 % infill
Wydruk około 12,66 €–15,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Support needed Not exacltly the same as the original (red) but works well.
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
A holder with retention for a Bosch Blaze laser measuring tool. I printed mine in PETG and mounted it in my clipboard with double sided tape.
Wydruk około 0,91 €–1,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Based on the idea of the user Sneaks i made a measuring tool for metric screws. This tool can measure M2-M10 screws with a length of 4-120mm Printing instructions: 0,15 mm layer height no supports infill 15% rectangular infill 2…
You never quite know how much filament is left on a spool. To quickly and easily estimate this, I created this tool. With it, you can find out in seconds if you have enough filament for your next print. Complete new design here available:…
I found a high number of measuring tools for metric screws. But what about a measuring tool for inch screws, nuts and wrenches? I couldn't find any, so I created one, or better two :-) The tool is created for UNC and UNF threads and…
You never quite know how much filament is left on a spool. To quickly and easily estimate this, I created this tool. With it, you can find out in seconds if you have enough filament for your next print. New design: better readability…
Note: For a larger version that covers M3-M10 sizes up to 100mm, see my Bike Scruler . For a version of that with metal inserts for the M3-M6 sizes and magnets, see my Etsy store . Quickly sort and measure metric screws and bolts in sizes…
This Tool can be used to measure the outerdiameter of something. You can either print the numbers in the same color as the rest of the model or you can print the numbers in a different color. To find out how to do this, please read the PDF
Those designs are a set of rings to measure the size of your finger and see what ring size you are most comfortable with. The files are designed and named after the US chart but you can refer to the ring size chart in the illustrations to…
Sometimes all you need is a 45/90 degree tool for tracing and cutting. It is a 2 piece tool that is a must-have in any Carpenter toolbox. You can use them combined and it is good to join wood planks at 90 degrees or to trace lines tracing…
Update 01/13/2025 I have added a teepoon-sized cup (5ml). The Tablespoon is around 15ml so you just need to print the 1/16th cup for this.…
I like this caliper a lot so I added it from thingiverse. Here is a link to the original. https://www.thingiverse.com/thing:1661962 Original Description: Summary this is a wip. i will be tweaking and adding files and information as i go.…
this is a measuring cup cup for when you do not want to do multiplication of division you can just add it
This is a great design by Sneaks at https://www.prusaprinters.org/prints/3408-quickly-measure-sort-m2-m3-m4-m5-metric-screws-up- but also to cmh at https://www.thingiverse.com/thing:4154091 for sanitising this for me (version with no…
Here is a set of radius gauges. When I printed the case I moved the slider latch over to the side to allow easier removal of the support material, It worked pretty well. I forgot to mention you will have to move the smaller (2-9, 2-3,…
Added a raised flat handle to make turning easier. July 2024 :- Updated handle files to match the different base sizes from codysechelski project
Do you need measuring spoons? Here's a set of the most common measuring spoons for you, no support is needed! :) Print instructions Recommended settings: Layer height: 0.12mm or 0.16mm Perimeters: 3 Infill: 15%
Thread Gauge Tester: A Handy Tool for Measuring NPT Hydraulic Pipe Threads Looking for BSPP thread testers? You can find them HERE! November 10, 2024 Update: Added tester variants with a tab for easy organization on a ring, cord, or zip…
Here is a single print that measures inside and outside angles to within +/- 1 degree. It is one print with no support needed. The pointer hole provided me a medium press fit on the pin. This allowed the pointer to turn,, stay in place,…
I have been asked to create a measuring tool similar to my “Inch Measuring Tool” https://www.printables.com/de/model/345844-inch-measuring-tool-for-screws-nuts-bolt-heads-wre So here it is! The dimensions are based on ISO DIN 13. (I will…
Updates 2023/08: Updated the handles and the base on the 25 and 50 ml variant (v1.4). The new handles are scaled according to the cup size, are sturdier and look more appropriate. The base has been widened slightly, making them stand more…
🌀 Peristaltic Pump (NEMA 17) This is a compact, fully 3D-printable peristaltic pump designed to be driven by a NEMA 17 stepper motor . The pump uses standard 608 bearings and soft tubing, making it easy to build with commonly available…
Modified version of the original Measuring tire groove from Lopata_225 . I had a problem with printing the inner part that needs supports. Therefore, I modified the model so this part does not need supports and could be printed with the…
I originally made this for measuring out dog food, although I have included a blank version that could be used for other things. I am also including the Fusion 360 file so that it can be customized, including the ability to easily change…
I really liked the idea from Boogie for screw measuring/sorting helper but decided to design my own with some of his approach in mind. FEATURES size of a credit card so you can put it in your pocket or a wallet screw sizes M2 - M12 screw…
Print it at 0.2 mm layer height. two colors 10 % infill Grid. Check the model here: https://a360.co/3F0p4nY
Based on the metric versions developed by users Boogie and Sneaks, this version is meant to help measure and sort Imperial fasteners, from #2 up to ½" in diameter and up to 6 inches long. It was designed in Onshape. Printing Instructions…
It's important for children's shoes to be the correct size. Shoes that are too small or too large can hinder foot growth, cause discomfort, and even lead to long-term health issues. Properly fitting shoes support the natural development…
Thread Gauge Tester: A Handy Tool for Measuring Hydraulic Pipe Threads Looking for NPT thread testers? You can find them HERE! ***Smaller Size UPDATE*** (July 18, 2024) Added the following measurements: 1/4 inch, 1/8 inch Product…
I was looking for a new scoop for my hot chocolate mix (since it didn't come with one) that was both good looking and easy to print ( 45deg angles or better! ). I was going to make just one, but then got carried away and figured they'd…
A hole diameter measuring tool which you can keep in your pocket. It can be used to check diameter of a hole where other tools might not reach due to tight space. The 14mm variant can measure 14mm, 12mm, …, 4mm diameter. And the 15mm…
remixed from https://www.thingiverse.com/thing:682146 Beefier and with a longer handle than the default settings. 0.5 Tablespoon 1 Tablespoon 1.5 Tablespoon 2 Tablespoon 3 Tablespoon I printed a couple of them and like how they came out.…
Prints just fine with only 2 perimeters (0.4mm nozzle) and no infill. Also no support needed For reference: 1ml suitable for measuring spices 2.5ml equals the volumen of one average sugar cube 5ml-15ml Usefull around the kitchen 20ml-25ml…
Summary Measuring tire groove Print Settings Printer brand: Zortrax Printer: Zortrax M200 Rafts: Yes Supports: Yes Resolution: 0.09 mm Infill: Full
Two of these caliper jaw extensions, fitted to your analog or digital calipers, allow direct measurement of the distance between two hole centres without any calibration or calculation. As demo-ed in my YouTube video: This is the STL as…
Measuring Spoon & Funnel Set for Protein Powder & Sports Drinks. Ideal for Milkshakes & Shakes, Perfect for Kitchens & Restaurants. Print the different parts and glue the parts together with the right amount of superglue. The sliding flap…
A radius measuring set (for both inner and outer radii), designed to fit within a 1x2x3 Gridfinity box. Notes: I didn't include 1 mm radius because honestly, I don't think it's really needed. The individual pieces default to being printed…
½ measuring cup I modeled the cup so it's a real ½ cup (125 ml) measure. Let me know if you would need a ¼ cup in the comment ! I 3d modeled the part but I do not own the 3d model since it's been modeled with OnShape. Not for commercial…
parts required 1x Ø2mm toothpick I love the Geneva Roller Ruler by MechEngineerMike from Thingiverse. It has a geneva wheel that count from 0.1 to 0.5m. But I wanted one that count from 0.1 to 0.9m, so I designed one. I also design this…
Remix from: https://www.thingiverse.com/thing:4154091 Re-modeled everything from 0 just used the idea. Included the ISO standard lengths and made it longer, added more thread sizes, added a simple ruler on one side, added nut sizes on the…
This is a tool for measuring the external radius of a round part of an object. It's particularly useful when you are trying to create a 3D model of a real thing. There are two versions (for now), one that goes from 1 to 10 mm, and another…
I added different ribbon height options after user feedback. The size in mm is the size of the opening in the CAD, so you should leave some margin to have a bit of clearance (for example with the 15mm model, the actual opening size was…
After printing a few mini flower pots, I wanted to have a small measuring cup to water my plants and keep track of how much water I am giving them. You can use it to water your plants, or as a mixing cup for mixing paints, two part epoxy,…
I was inspired by a lot of great screw measuring tools available to print, such as this one by Sneaks. This tool measures M2, M2.5, M3, M4, and M5 metric screws up to 50mm long in standard lengths, as well as the corresponding nuts. No…
Version 2 out now in a remix ---> All you need is a Nema 17 motor, 4 x 608 bearings and some 8mm plastic Tubing (Soft tube needed). You will also need some 16mm M3 screws to attach the pump assembly to the stepper motor. Of course the…
Simple tool for fast radius measurement (R2-R20mm). Just fit model to your object... Category: Hand Tools
The model was drawn in Fusion360. I did a Filament change at 0,6mm layer height. If you don't know how to change colour here is a video where it is explained. This little tool isn't a 100% accurate, but it should give you a good feel on…
I present to you my version of measuring spoons for those who love cooking. I printed them in petg, my trick to cleaning them, I wash them in warm soapy water and I soak them in household vinegar. Go all in the kitchen to prepare good…
I made a remix at my friend's request. maybe it will be useful to someone.
What it is A compact tool to determine the size and length of screws & bolts. In contrast to other designs it offers a unique cylindrical design which packs additional features like measuring flathead screws and corresponding nut sizes on…
I remixed the design so a 150 cm (60 inches) could fit in, which was not the case with other versions. I also added a little handle to rewind it faster. Since I printed a couple of those (as gift), the ones that I put a tiny bit of grease…
Remixed bolt measuring tool remixed to fit on a Gridfinity 3x1 baseplate. Printed well on Bambulab X1 using standard PLA and 0.2mm layer height.
I used PrusaSlicer to split/merge models from https://www.thingiverse.com/thing:4635654 to make embedded text.
NOTE: An improved version of this is available for purchase on my Etsy store . While you can download and print your own here, purchasing from my store gives you additional benefits: The M3, M4, M5 and M6 threads are pressed-in aluminum…
Small metric measuring spoon, usefull for measuring small volumes of fertilizer for example. 0.5 ml, 1 ml, 2 ml, 5 ml --------------- Malé odměrné lžičky, vhodné například na odměření malého množství hnojiva pro domácí květiny.
Latest files are available on MakerWorld. Get the full Plate Print Profiles: https://makerworld.com/en/models/375151 === The original by @noahrr was one of my favorites, but I found the winding holes too small for my fingers, so I remixed…
Print your desired color for the body, then change filament at the last 0.3mm to make the labels stand out.
This is a 6-in-1 measuring tool that contains a protractor, simple caliper, hex measurer, radius finder, bolt sorter, and bolt length finder. For best results print with a lighter color and use a sharpie to highlight the tops of the…
Measuring cup for using proper amount of chemicals (detergent, citric-acid, bicarbonate, etc.) in my household. Volumes: 25 milliliters 50 milliliters
Notice: Not my work (scroll down) I needed a holder that would fit a 2cm x 246 cm measuring tape, so I found one online and wanted to share it with printables. Enjoy! Print Settings Rafts: No Supports: No
This measuring spoon can be printed without support thus guarantees the optimal printing results. The gap is filled up and it can sit upright. 2023-09-09 Added a longer handle version.
This is an alternative flow test without measurement to properly adjust the printer's flow. However, for those who still want to measure, it can certainly be done as the measurements are indicated in the image. The two puzzle pieces are…
0.3 mm layer Remove sacrifical bridging in both slots in body.stl
This is a high quality, 1 cup / 8 oz measuring cup that I made to help measure non-food items around the house like fertilizer for plants. I would recommend to print it right-side up, with supports for the handle that you can break off…
Easy to print spaghetti measuring tool
An adjustable measuring spoon I made that allows for measurements of substances anywhere from 1 - 30 ml or 1 - 6 tsp. Works with a piston that moves to reduce or increase the volume of the spoon with the turn of a dial. The dial has…
New box for holding magnets. - 2x washer up to 24mm diameter, inner diameter over 8mm, 2mm height - Insert into box during printing https://www.printables.com/model/1469521-roboter-tool-measuring-tcpbase
Description: This is a measuring cup with a volume of 100ml and a scale each 10ml. I hope you like the model! → Makes and Comments are very much appreciated :) Hints: To avoid strange/ugly seam positions on the outside of the round…
Small Measuring cup 20ml for Household Print Settings Printer: Own Build ndl V2 Rafts: No Supports: Yes Resolution: 0.125 Infill: 25% Filament: Generic PLA, PETG, ABS doesnt matter Notes: I printed it in ABS Category: Household
I had a need for two 1/3 measuring cups. Rather than buy two sets of measuring cups to only extract those needed measures, I came up with this measuring cup design. The measuring cup design has a simple handle and is intended for…
This model is based on a trace from a similar model on Thingyverse. I made improvements to reposition slots, changed angles to improve printability and the quality of the printed text. This can be printed in PLA, PETG and ABS without…
I wanted the cylindrical part the same height and the diameter variable. Since I did not manage to convert the formula mathematically, the values were approximated with Excel. With the scad file you can vary even more. Ich wollte den…
measuring cup prints without support scalable
A compact version of the source
Conical measuring aid for bicycles, works with a tape measure to find the center of any recess from 6mm to 30mm. Works with 8mm crank bolts, Shimano crank fixing bolts, and hollow spindles. Put the hook of the tape measure in the recess,…
Teaspoon and quarter teaspoon measuring spoon
I was making pasta but didn't know how much I had to make for one person. So online looked up the diameters and created a tool for it. It can measure 4 serving sizes of spaghetti: 1 to 4 servings and a hole to hang the tool on it. You can…
To store my measurement tape at my french cleat system i designed this mount. The clip may be up to 24 mm wide and 7 mm deep. Made for 3-4 mm screws. If you like my work and want to support it you can do it here:…
