40 modeli
Designed to suck only clean air. For example, from the filament package. Don't try vacuuming dust... Designed to have a firm friction fit. The firmness will depend on the printer and the filament. For the best results, cut the model and…
Summary Customized attachments for the Wolfbox MF50 dust blower for individual areas of application (keyboard, notebook cooler, all types of filters, etc.) Print 0.16mm layer height 3 outer walls / perimeters 15% infill supports are…
Flat design so it fits in my toolbox drawer. Prints well in PLA with low infill.
printed with bambu standard petg presets 30mm m3 bolts were used for the latch and the hinge
NOT an official step file, just my quick measurements. Used it to make my snap fit case: https://www.printables.com/model/1358459-wolfbox-mf50-snap-fit-case Basic nozzle included. As for other nozzles, I did not include any of the…
A quick easy to print holder for the WOLFBOX MF50. Sturdier then the plastic tray that comes with the electric duster.
Mount your Wolfbox MF50, inclusive accessories, on your Skadis pegboard! Using the T-Clip System by @LineArcLine. I printed it with 15% gyroid infill with the big flat face on the print bed. Support enabled for the horizontal parts. See…
Store your MF50 fan in a personalized case. INSERT piece needs to be printed in PETG for snap flexibility. All printed supportless, with an insert designed to press fit into the case (0.1mm clearance). Magnet holes are for 5x5, but STEP…
Simple case to store the Wolfbox MF50 blower, the lid is optional, you can put whatever gridfinity box on top instead. The simple pull over clamp might be adjusted in size to work with the material shrinkage you have, just adjust in the…
Quick remix to make unit easier to remove, no lettering, and 6x3mm magnets.
I created a stand for my Wolfbox MF50 + accessory nozzles to sit on my workbench for easy access. It includes an integrated channel in the bottom which provides airflow to the vent on the bottom of the unit. The charger port is uncovered…
Made my own version of gridfinity storage for the Wolfbox MF50 in a 4 by 1 gridfinity grid to save on the used area andi improve grabability. This fits perfectly in the deep Ikea Alex drawers.
Made a holder for my MF50 to mount it on Multiboard. Recommend using 2 multiconnect connectors, but 1 could work too.
Print it as you prefer, I just recommend a brim as the design may be prone to warping. Higher infill will help in rollover accidents. I printed mine in PETG 60% infill.
Simple mount I designed to hold the MF50 under my desk. Can be mounted to hold vertically or horizontally and can also be mirrored in slicing software to reorient. Should be no problem to wall mount as well.
Cuscinetti lineari con flangia tonda serie LMF misure da LMF6UU - LMF8UU - LMF10UU - LMF12UU - LMF16UU - LMF20UU - LMF25UU - LMF30UU - LMF40UU - LMF50UU. Creati con solidworks con passaggio semplificato. per le misure complete consultare…
Used for wolfbox mf50 to hold nozzles on skadis board Print with supports! I used 100% infill, 0.2mm, with grid style supports, takes about 2 hour on mk3s
This project includes two Multiboard attachments designed for the MF50 Wolfbox tool : A holder for the MF50 Wolfbox device itself A separate holder for up to 4 nozzles
To fit into an l-boxx mini, I made a gridfinity bin that fits the Wolfbox MF50 air duster.
Just a case to store your MF50 with its acessories
Mount to the wall with countersunk screws. Done!
Holder for the Wolfbox MF50, design to fit IKEA SKADIS. Print with supports for the hooks. I used 15 % infill with 3 walls
Wolfbox MegaFlow 50 (MF50) Honeycomb Storage Wall Holder Mount your Wolfbox MegaFlow 50 and accessories to your Honeycomb Storage Wall. Print Settings 0.2mm layer height 15% infill (could probably get away with less)
Print the mounts. Print 3x universal attachment. Voila.
Thanks to @PrintingPerspective for the great original model. by @CriptasticHacker https://cripsrise.neocities.org/ Please leave a ♥ if this helps you :) The MF50 is perfect for suction adapters given its hex shaped plastic body.…
We have a OXELO Freestylestep MF500 step for the kids. While it's a good and sturdy step, braking takes quite a lot of force/weight. The kids have to press really hard on the brake metal before it even touches the wheel, therefore…
The WOLFBOX MF50 Compressed Air Duster is a best-selling (#1 on Amazon) fan-powered air duster. It's a great product; compact, rechargeable, and surprisingly powerful. This product gives you a super handy "holster" that lets you mount the…
Printed with supports on the bottom of the fins, I used 3M double sided tape. Gluing is probably a more secure approach.
This is a handy holder for the WolfBox MF50 air duster. The model comes with 3.5mm screw holes to attach the holder to a shelf/workbench so that you can store the air duster out of the way. I printed it with 20% infill, 0.2 layer height.…
INTRO The Wolfbox MF50 is a great tool but it always felt a little small and cheap in the hand. I made this TPU cover to improve the feel of the device and hopefully improve its durability, while maintaining the design aesthetic as best I…
This is a replacement lock arm for the Mitsubishi MF501B 360kB floppy drive. I needed it for MF501B-312M, but I suspect it is compatible with other early Mitsubishi 5.25 floppy drives, with bolt mounted lock arms. I loosely followed the…
French Cleat style holder for the Wolfbox MF50 duster ( https://www.amazon.com/dp/B0DSW7R4VN ). I didn't like other holders I saw out there for this unit. I wanted something compatible with wall mounting and I wanted the attachments to…
Summary Customized attachments for the Wolfbox MF50 dust blower for individual areas of application (keyboard, notebook cooler, all types of filters, etc.) Print 0.16mm layer height 3 outer walls / perimeters 15% infill supports are…
Used for wolfbox mf50 to hold nozzles on skadis board Print with supports! I used 100% infill, 0.2mm, with grid style supports, takes about 2 hour on mk3s
printed with bambu standard petg presets 30mm m3 bolts were used for the latch and the hinge
Flat design so it fits in my toolbox drawer. Prints well in PLA with low infill.
INTRO The Wolfbox MF50 is a great tool but it always felt a little small and cheap in the hand. I made this TPU cover to improve the feel of the device and hopefully improve its durability, while maintaining the design aesthetic as best I…
Holder for the Wolfbox MF50, design to fit IKEA SKADIS. Print with supports for the hooks. I used 15 % infill with 3 walls
Printed with supports on the bottom of the fins, I used 3M double sided tape. Gluing is probably a more secure approach.
Made my own version of gridfinity storage for the Wolfbox MF50 in a 4 by 1 gridfinity grid to save on the used area andi improve grabability. This fits perfectly in the deep Ikea Alex drawers.
