Źródło oznaczyło ten model jako treść 18+.
Wydruk około 3,32 €–4,05 € nettoWstępna wycena jednego wariantu
- Pobrania
- 49 247
- Polubienia
- 12 541
- Ocena
- 4,75
20 795 modeli
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 3,32 €–4,05 € nettoWstępna wycena jednego wariantu
Update: V2 is much smaller! V1, named ‘Bigfoot’ by those commenting here, had the majority of its development dedicated to troubleshooting code, with the CAD being a first attempt. V2, which I'm calling ‘Mini-ish’, inverts the joysticks…
Wydruk około 9,97 €–12,19 € nettoWstępna wycena jednego wariantu
This is a remix of Crafty Sven's excellent articulated Guardian. Just like the original, it prints without supports. When I first printed the original model, I was honestly surprised that the head isn't designed to move - because most of…
Wydruk około 7,20 €–8,79 € nettoWstępna wycena jednego wariantu
Updated Threaded Rod Model to remove extra shell which was causing slicing issues for some. New “v2” version will work with the original Nut but I added a v2 Nut just in case there is confusion. This is a remix of a remix of a remix. The…
Wydruk około 9,82 €–12,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update V2: I completely rebuilt the Duplo connector. I changed three things of the original "Minimalist Duplo - Brio, IKEA, Wooden Train adapter" with Tinkercad in order to fit my needs: I reduced the inside height of the Duplo connector…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
This is a remix of Frank Deschner's moon lamp to work on the Prusa Mini. I have always wanted a moon lamp and seeing that the only files available were designed for larger printers than the Prusa Mini, I tried to modify an existing design…
Wydruk około 3,70 €–4,52 € nettoWstępna wycena jednego wariantu
Remix of the Weekly Pill Case / Organizer with Personalized Monogram Screw by printfutura , whose design was inspired by the 7-Day Pill/Capsule/Tablet Dispenser by Jambeetle and the Parametric Pill Boxes by pmoews . I take lots of big…
Wydruk około 7,10 €–8,68 € nettoWstępna wycena jednego wariantu
I saw the super cool print in place box by DrJones and i wanted to try to make it so only I can open it. Print it with low filament flow so the parts dont get stuck together. (All redy set to low flow in the g.code) All box sizes are the…
Wydruk około 2,28 €–2,79 € nettoWstępna wycena jednego wariantu
Round version of the eye is added Project file added G-code file added
Wydruk około 8,89 €–10,87 € nettoWstępna wycena jednego wariantu
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic - Support from build plate only Seam: Rear/Back If you like my work consider Buy me a coffee 😊 Check ou my other cute keychain
Wydruk około 0,62 €–0,75 € nettoWstępna wycena jednego wariantu
Multimaterial remix. Original model by Alsamen: https://www.thingiverse.com/thing:4410839 Print instructions Adjust purge volumes for your filaments.
Wydruk około 25,93 €–31,70 € nettoWstępna wycena jednego wariantu
made some kodamas. they probably need a bit of support, at least for the arms. but i dunno. the picture only shows #0 and #2
Wydruk około 2,15 €–2,62 € nettoWstępna wycena jednego wariantu
I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
I made a 2nd remix of this beautiful Spyro the Dragon full multi material model with way more details (he got more dragon scales on his back) and some corrected anatomy. Besides increasing the details I also sliced him into 2 parts and…
Wydruk około 44,82 €–54,78 € nettoWstępna wycena jednego wariantu
You can print one set in proper colors and the other in shiny versions - or dont, I'm not even your real dad.
Wydruk około 6,14 €–7,50 € nettoWstępna wycena jednego wariantu
I printed this model but found the two bottom supports the phone actually rests on were too far apart for Android mobile devices. So, I slightly modified these supports to better hold iPhones. Please see additional print info. in the…
Wydruk około 11,37 €–13,90 € nettoWstępna wycena jednego wariantu
This Prusament Goldfish remix was hand-painted and prepared for both the 4T and 8T versions of the Prusa CORE One+ INDX. Its patterns ressemble a goldfish you can find in an aquarium. Filament used for printing the presented models: The…
Wydruk około 9,76 €–11,93 € nettoWstępna wycena jednego wariantu
This is a remix of the very popular Rugged Box by @3DesignsCH . I really like the model, but it does not fit all the tools of the Prusa XL. I therefore created this remix of the design. The box is overall larger, to accommodate the…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
I was looking for a solution that prevents the suction hose and the cable getting caught on the end of the guide rail when sawing with my Festool TS55 saw. I printed first the excellent model…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
Purpose The Prusa Core One (+/L) frame's sheet metal parts do not form an air-tight and dust-proof seal in the top corners. The present corner plug remedies that shortcoming. Features Unobstrusive design Does not need magnets but snaps…
Wydruk około 1,82 €–2,23 € nettoWstępna wycena jednego wariantu
I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No (v2) Supports: Yes (v1) Check other Valentine keychains https://www.printables.com/model/1162970-my-sexy-valentine-keychain…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
This is just a simple rescale of the original for use with tablets. I liked misterT's remix of jonnig's phone stand , especially the stronger front hinges, which tend to break easily in the original. But the "medium" version is too small…
Wydruk około 3,39 €–4,14 € nettoWstępna wycena jednego wariantu
It's a remix of the Big Einsy Case cover with hexagonal holes and Prusa logos. Big Einsy Case HoneyComb remix also available : https://www.prusaprinters.org/fr/prints/67408-big-einsy-case-honey-comb-remix Big Einsy Case HoneyComb remix…
Wydruk około 2,07 €–2,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Please be aware, that these types of knives are prohibited in Canada. This is a minor remix of the trunnions which now include printed threads. There are 2 versions of the trunnions available. One set which looks similar to the originals,…
Wydruk około 3,51 €–4,29 € nettoWstępna wycena jednego wariantu
Compact Capsule Filler with Credit Card Mixture Dispenser This compact capsule filler is designed to fill 24 capsules of size 00 in one batch using a credit card as a mixture dispenser. The capsule filler is made up of three functional…
Wydruk około 4,84 €–5,92 € nettoWstępna wycena jednego wariantu
Remix of https://www.prusaprinters.org/prints/27742 . I needed a compact solution for the X-arm chain because my printer sits in a very tight space. The heatbed part worked perfectly for me and is unchanged. Print instructions Additional…
Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu
Suggested print settings: Layer height 0.2mm. Infill 50%. Perimeters: 5 (for strength). No supports needed. More durable when printed using PETG. Assembly The components fit together using a friction-fit mechanism. Push the "Lock" piece…
Wydruk około 0,67 €–0,81 € nettoWstępna wycena jednego wariantu
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
Wydruk około 2,40 €–2,93 € nettoWstępna wycena jednego wariantu
Paint Mixer - remixed from https://www.printables.com/prints/171895-paint-mixer to give it more robustness on the shaft element. TinkerCad file: https://www.tinkercad.com/things/6CBctKDDngC Shaft diameter increased, base/propeller…
Wydruk około 1,04 €–1,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For those of us who can't paint, I remixed the ornament to a multi-color version. The 3MF is scaled up to be about a 3.5" ornament. I wanted a decent sized print to be shown with pride on our tree. As an added bonus, it makes it a little…
Wydruk około 15,22 €–18,60 € nettoWstępna wycena jednego wariantu
This is a remix of the print sheet holder designed by Waldmops. This a stand alone version. I printed in PETG but it should work with PLA Infill: 15% Layer Height: 0.2mm Supports: No If you like my work consider Buy me a coffee 😊
Wydruk około 6,20 €–7,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of the original File by Back37strad. My main goal for this was to make an actual knob smaller compared to the original in height. You can see in the images how it compares to the standard knobs on my beautiful Ibanez…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I combined the Miriam wand model made by voldatrom with the Harry Potter wand made by Matteo_Arcari to make this wand. I liked the handle of the Potter wand but I really liked the twisting branches/twigs of the Miriam wand so I made this…
Wydruk około 9,59 €–11,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Credits to manabun on Thingiverse for the great original design! Original: https://www.thingiverse.com/thing:2769344 I modded the design to be printable in a better position without support. The slot is slightly modified for an easier fit…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
very useful to unload pastry of the mix-pot, simply attached to the blade and turn…. ----------------------------------------------------------------- sehr nützlich um Teig aus dem Mixtopf zu entnehmen, einfach unten auf den Antrieb…
Wydruk około 3,60 €–4,40 € nettoWstępna wycena jednego wariantu
Design Concept This 4 Ring Gyro Fidget Keychain is a compact and portable remix design meant to provide a calming fidgeting activity. Circular rings nest inside each other, offering a smooth spinning effect. Use Ideal for stress relief…
Wydruk około 0,60 €–0,74 € nettoWstępna wycena jednego wariantu
Recommended print settings: Material: PETG Layer Height: 0.20 Infill % : 15 Supports: No Print Orientation: Default as modeled. As seen on Jelle Romers video: And article:…
Wydruk około 2,16 €–2,64 € nettoWstępna wycena jednego wariantu
Minimal remix of @Dingezzz remix of the 1-30mm Radius Gauges by @Restoredoctor. Reduce the filament use of the original model by 52,8% from 225,72 to 106,38 Three prearranged build plates in 3mf and stl format for all tiles with correct…
Wydruk około 2,15 €–2,62 € nettoWstępna wycena jednego wariantu
I've remixed this nice model to convert it into a nice planter inspired in the chids tale “Manuelita” (He's Turtlue Kid) It was printed on a Artillery Hornet. with prusa slicer 2.5. (using prusa profile Hornet 0.20) Flament : PLA 3n3.…
Wydruk około 2,40 €–2,94 € nettoWstępna wycena jednego wariantu
1.PRINT IT 2.SNAP IT 3.ROTATE IT 4.PRINT ANYTHING BETTER Stop squeaky noises, mesh bed leveling errors, Z wobble, Z axis errors on the Prusa mini+. No tools needed to install this printer upgrade. It might seem useless for some, but I…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remixed the original model in Fusion 360 so it could be repaired and remeshed as a single head. Created the .3MF with a hollow rod to unify the internals into a single body, but still look like 2 on the outside. This makes the body…
Wydruk około 19,65 €–24,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I printed in PLA Kodame: Infill: 15% Layer Height: 0.15mm Supports: Yes, organic Eyes and mouth: Infill: 15% Layer Height: 0.15mm Brim: Yes If you like my work consider Buy me a coffee 😊
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Can be printed without support
Wydruk około 9,26 €–11,31 € nettoWstępna wycena jednego wariantu
Overview: Looking for a tough, practical way to carry and protect your eyewear? This remix of the Flexi Glasses Case is now part of my RangeVault series—designed for Everyday Carry (EDC) durability and convenience. Whether you’re on the…
Wydruk około 2,96 €–3,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The original model from thingiverse.com called “Brio/ Thomas rail switch (Duplo design)” by FuriousSun is quite nice. However, I think having female connectors on one side, but male connectors at the other side fits better with the…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
I designed this mixer to fit into a 10mm chuck. The total length is 160mm and the base diameter is 57mm. recommended material is PETG, with 25% infill and 3 Perimeters. Edit Added a second slightly bigger and improved version, with…
Wydruk około 1,70 €–2,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
German: Dieser Adapter ermöglicht die Verbindung von Duplo-Steinen mit Holzeisenbahnschienen, ideal für den Bau von Brücken und Abhängen. Der äußere Zapfen wurde modifiziert, um auch auf einen Duplo-Stein zu passen. Verbesserungen:…
Wydruk około 2,26 €–2,76 € nettoWstępna wycena jednego wariantu
This is a remix of mdkendalls successful “2,5” Three Jaw Chuck" for mounting on a Revopoint dual-axis turntable. The chuck can be mounted on the turntable with M6x8 countersunk screws or with the screws developed by Whitehawk2000 . From…
Wydruk około 2,85 €–3,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a slight modification (added text, print settings, etc) and print preparation for printing your own 3D Printing Settings sample box featuring various Infill types, Finish types, and Surface pattern types. The following Patterns…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
Printing & Assembly instructions Print the Ramp on its side, I also recommend printing with an Inner Brim 3mm if you are concerned about low bed adhesion. I printed at layer hight of .35 for speed and 10% Rectilinear infill two Perimeters…
Wydruk około 10,57 €–12,92 € nettoWstępna wycena jednego wariantu
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
Wydruk około 1,27 €–1,55 € nettoWstępna wycena jednego wariantu
A remixed version of user @ianfolds double hook designed to work with the 3m command strip backing for direct attachment. Prints with PLA and no supports. gcode file from prusaslicer for a prusa mini+ and PLA included.
Wydruk około 2,13 €–2,60 € nettoWstępna wycena jednego wariantu
NOTE : Addition on Sept. 5, 2024; two variants added : Measure06C - label holder on outside of cup Measure06D - plain cup, no label holder This measuring cup was made specifically for my chainsaw, which requires a gasoline:oil mixture of…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
MobyDisk's OpenSCAD train track library SE has some AMAZING parts, but I wasn't a fan of the bridge, because you'd still require a block to support the track spanning the bridge. I took the bridge ramps into TinkerCAD and added a…
Wydruk około 6,73 €–8,22 € nettoWstępna wycena jednego wariantu
Remix mit Noppen und Fuzzy-Skin für ein besseres Handling.
Wydruk około 3,29 €–4,03 € nettoWstępna wycena jednego wariantu
This is a remix of one of the excellent handles by @TripleGWorkshop. It provides a stronger print by changing the orientation during printing. The original model is split and alignment pins have been added to aid in gluing the halves of…
Wydruk około 4,35 €–5,32 € nettoWstępna wycena jednego wariantu
There is 3 Keychain version I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: No If you like my work consider Buy me a coffee 😊
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
A case made for mounting your Raspberry Pi4 to your Prusa i3 MK3. Smallest form factor possible for a Pi4. All peripheral ports accessible (not the Pi headers). Break away window for Pi-cam. Windows for status lights. Easy to print: no…
Wydruk około 2,61 €–3,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted a textured surface on my print, so I remixed this to be able to print the parts laying flat on the 180x180mm bed. You'll need to print them with supports, but without a skirt or brim when printing on a Mini/Mini+; after which…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Digital File to DIY 3D print ER20 threaded (25x1.5 mm) Chip Fan. The chip fan produce at lot of air movement so it is recommanded to use it with a strong vacuum capacity dust boot. Use at your own risk (mine is working fine). STL, 3MF and…
Wydruk około 1,28 €–1,57 € nettoWstępna wycena jednego wariantu
This is a remix of Mao Zedong's figure, I added platform to. Was made as a gift to my friend.
Wydruk około 7,82 €–9,56 € nettoWstępna wycena jednego wariantu
print in shown oritation, pause at layer 51 (14,40mm) and toss in a M4 nut in both. enjoy i used 0.6 nozzle on CR-10 Smart (klipper) layer height 0.28, layerwidth 0.72. 100-125mm/s 3Dsupreme PLA+ off white (colour seemed to fit)
Wydruk około 1,64 €–2,01 € nettoWstępna wycena jednego wariantu
The turning tool is a small helper for the Thermomix (TM5) from the company Vorwerk for easier removal of dough. It was designed by McBohl . You can find his publication on thingiverse . With this one can easily turn the knife of the…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No Check other Valentine keychains https://www.printables.com/model/1162970-my-sexy-valentine-keychain https://www.printables.com/model/1169351-i-love-you-soundwave-keychain-1…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Bed Scrapper w/ Replaceable Blades: Tired of reprinting a whole bed scrapper when the edge gets worn? Just print another blade! A practical, fast and environmental solution! Print time on the blade is only 9 minutes ! A multipurpose…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The frog itself doesn't need supports, but the hook does.
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, snug but only to support oring If you like my work consider Buy me a coffee 😊
Wydruk około 0,61 €–0,74 € nettoWstępna wycena jednego wariantu
Simple remix of a perfect model, deleted antenna, added ring for hanging. If I already have the gold filament, it would be a shame not to use it.. thank You very much https://www.printables.com/cs/social/80-jace1969/about ** Jednoduchý…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
Remix of Low Profile Prusa Mini Anti-Vibration Feet by Alexander Þór . This is the most effective upgrade I have made for my printer. Absolutely brilliant model. The printer wobbled after installing these dampening feet, so I modeled…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print the dino-clip in place without supports. Print two sets of axles for each hole with supports. Works great at 0.2mm. Set Infill to any percentage, I am using 20%. Works best to insert both outer axle pieces at the same time or do the…
Wydruk około 2,31 €–2,82 € nettoWstępna wycena jednego wariantu
Levi Sitts provided a great collection of gargoyles (see here : https://www.prusaprinters.org/prints/20577-gargoyle-fence-post-toppers ) I wanted to put a couple of them on top of two solar light posts, but my posts have pyramidal tops -…
Wydruk około 2,71 €–3,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Increased base height to strengthen and made less deep to make getting parts in and out a little easier. Supports: No Resolution: 0.3 Infill: 20% Notes: Sliced in Cura w/ Horizontal Expansion = -0.3
Wydruk około 2,48 €–3,03 € nettoWstępna wycena jednego wariantu
While optimizing the placement of instruments on the pegboard, the original clips broke frequently. I created a version with enhanced spring strength and was pleased with their survivability. The original model can be found here…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu
This is modifed version of the initial vase mode design. Primary goal was to reduce print times and plastic use for PLA disposable printing... This design compared to RC2 uses 3 to 4 times less plastic and is usable... It is much improved…
Wydruk około 6,18 €–7,55 € nettoWstępna wycena jednego wariantu
This print-in-place openable backpack will fit both “EASY 13” and “MINI 13” poseable jointed figures by soofazone , which have a slot for a rectangular pin on the backside of the chest piece - as opposed to “LUCKY 13” , for whom this…
Wydruk około 0,52 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix of dMosher's design “ Larger Console Tray for Honda Pilot or Ridgeline ”, with minor improvements. This should be compatible with the following vehicles that use “Base Tray” part number 83407-TG7-A01 or 83407-TG7-A02: 2016-2022…
Wydruk około 10,03 €–12,26 € nettoWstępna wycena jednego wariantu
Print Tips The normal size version should be fine for most average keyboards. Can add two small (10mm diameter) helper discs to the model in the slicer (as shown in the attached 3mf file) so we can be more relaxed about printing.…
Wydruk około 1,44 €–1,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I modified the original version so it can fit a normal door size with 33m thickness. 10% infill and 0.2 layer height and should be printed with the side facing the plate, at horizontal orientation. I recommend using a 3M tape on the back…
Wydruk około 1,92 €–2,35 € nettoWstępna wycena jednego wariantu
Tired of mixing paint or epoxy by hand, use this tool. Designed to be used with a 6mm threaded rod
Wydruk około 0,95 €–1,17 € nettoWstępna wycena jednego wariantu
Technically not a remix but a re-implementation from scratch in Fusion 360 but directly guided by agarajag's design . I liked it but I wanted to add a small tray for paperclips, and I took off some of the superfluous material on top.…
Wydruk około 14,77 €–18,06 € nettoWstępna wycena jednego wariantu
Remix-A-Stix are a set of parametric ball joints, sockets, and connectors, compatible with Mini 13/Lucky 13 ball joints (via 6mm ball joints) and Gunpla accessories (via 3mm pegs & holes). Dimensions and tolerances can be remixed using…
Wydruk około 3,00 €–3,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I remixed Jonas whistle with a scout sign emboss. Now updated! with 2 new models.
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
Self defense use, a novelty, or whatever you choose. Maybe this will help you drink from the skull of your enemies? Maybe use it while smoking a cigar and using the skull of your enemies as an ashtray.…
Wydruk około 5,68 €–6,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Albert-Ernest Carrier-Belleuse was a prominent French sculptor and ceramicist of the 19th century, renowned for his eclectic style blending realism, naturalism, and decorative elements. His works often incorporated mythological and…
Wydruk około 18,07 €–22,08 € nettoWstępna wycena jednego wariantu
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
This is a remix of a remix! Asdesign's remix of MakerBot's flamingo is quite charming, but I didn't like its splayed-sideways leg position. I decided to remix it to put the legs in a forward/backward “walking” position. The flamingo…
Wydruk około 0,89 €–1,08 € nettoWstępna wycena jednego wariantu
I took this excellent model and remix the hinges (bigger with a plug to make it mobile). I've change the interior covers (to participate in a printing challenge), in one side I added a Sun clock, and in the other side a message Witten…
Wydruk około 5,39 €–6,58 € nettoWstępna wycena jednego wariantu
This handy and nicely clicking damage counter is small and satisfying to use. Only 5mm height. Other side of the counter you get numbers 10-100 in 10 point steps and other side of the wheel numbers 110-200 in ten points steps, I had a bit…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
Pitbull-Labrador mix dogs are playful, loyal, intelligent and cute. If you have one, squirrels rabbits and chipmunks won't bother you.
Wydruk około 3,11 €–3,80 € nettoWstępna wycena jednego wariantu
The walls are 1.35mm thick and bottom side is more rectangular for more stiffness.
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
I've created MMU remix for BTTF licence plate because I'm too lazy to change filaments. I used three filaments - white, orange and black. I printed mine in ASA.
Wydruk około 7,17 €–8,76 € nettoWstępna wycena jednego wariantu
After printing a box for my inclinometer, I use for my table saw → https://www.printables.com/model/63528-tool-box-parametric/comments/86291 , I decided to 3D print another box to store my micrometer to replace the original wooden box and…
Wydruk około 2,48 €–3,03 € nettoWstępna wycena jednego wariantu
La poignée/levier qui sert sert à incliner les sièges des Twingo ou Clio à tendance à casser avec le temps. J'ai reproduis le design de la pièce afin de pouvoir l'imprimer en PETG (moins cassant que l'ABS d'origine) ou en ASA. Hauteur de…
Wydruk około 2,47 €–3,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
The orginal didn't quite fit on the lip of the drawer organizer we had, so I adjusted the XY dimensions to fit my space. Printed in PETG but PLA or any other material should do wel.
Wydruk około 32,30 €–39,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Easy print. The two halves must be glued together. I used KrazyGlue and it worked fine. A couple of skewers made the legs. No special settings needed; I used 10% infill but I think you can use whatever you want. I added the black details…
Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu
Remix of Buddy3D Buddy 3D Camera Mount Prusa MK4/MK4s and other Aluminum Alu Profiles
Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Die "Bienenwabenstruktur" wurde in der Höhe von ca. 2-3mm reduziert, was eine gewisse Biegsamkeit bringt. Überdies kann es dann als Grill, Zaun, Untersatz usw. verwendet werden. Kann bei Bedarf weiter dünner gemacht werden Bezüglich…
Wydruk około 1,40 €–1,72 € nettoWstępna wycena jednego wariantu
The original model height is approximately 21cm. Suggested print settings: Layer height 0.2mm. Infill 20%. Perimeters: 3. No supports are needed. Models in pictures are printed at 50% scale. Changelog 20 Oct 2023: Version 2 - An alternate…
Wydruk około 3,03 €–3,70 € nettoWstępna wycena jednego wariantu
REMIX of "Cyclone Dust Collector" - Lower part only! Please get the upper part from here: https://www.printables.com/model/312929-cyclone-dust-collector -------------------------------------- Cool one, made an edit on the lower piece, for…
Wydruk około 11,14 €–13,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET