1571 modeli
IMPORTANT NOTE: 3D-printed plastic screws will break. Because of the way a 3d printer works, and the way the screws are typically oriented during printing, they are very weak. Things like printing in PETG, adding more perimeters, and…
Wydruk około 2,34 €–2,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Light bar for the Prusa i3 MK2/S and MK3/S/+ available in single light, dual light, and MMU2 compatible dual light versions. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
---- Grenade MK2 WW2 ---- UPDATE: Small update to the "Head" see "Head_v2". The "Head_v2" version will now slice/print better on the two flanges. Tried to make a Grenade, and as a reference I used the American MK2 fragmentation grenade…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
I designed those for two reasons. First, it's a pain to handle the bottom panel with the fan cable still attached to the motherboard. And second, when printing ABS, I was astonished to feel how hot the frame was. And I didn't like the…
Wydruk około 0,75 €–0,91 € nettoWstępna wycena jednego wariantu
Single light bar for the Prusa i3 MK2/S and MK3/S/+. Mounts attach to the hexagonal holes in the z-axis tops. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of…
Wydruk około 4,23 €–5,17 € nettoWstępna wycena jednego wariantu
A mount for installing a Prusa i3 LCD controller on the outside of a LACK enclosure. Compatible with MK2 and MK3 LCD assemblies. Not compatible with MK4 LCD assembly. Description This is a redesign of zamky's Prusa i3 LCD Holder that…
Wydruk około 2,69 €–3,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Light bar for the Prusa i3 MK2/S and MK3/S/+ compatible with the MMU2/S. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of the printer frame for a clean look.…
Wydruk około 3,77 €–4,60 € nettoWstępna wycena jednego wariantu
This is a simple dust cover for the Z-axis mounts. They drop in place, and prevents most of the debris from falling into the Z-axis mount opening. Update: People noted that the clearances wasn't working perfectly anymore, so I checked the…
Wydruk około 1,80 €–2,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
PRUSA color scheme print of the Predator Action Pliers Mk2. Print instructions Prints in place with no supports.
Wydruk około 6,15 €–7,52 € nettoWstępna wycena jednego wariantu
NOTE: This light bar was made after receiving requests from users to adapt my standard Prusa frame light bar. I do not own a Bear Upgrade printer, so I had to rely on other users to test it for me. Please leave a comment or message me if…
Wydruk około 7,55 €–9,23 € nettoWstępna wycena jednego wariantu
This is for use with PRUSA i3 MK3S+, MK3S+:MMU2S & MK2.5S+ printers. Designed to be used with TheZeroBeast MK3S:MMU2S Firmware here... " https://github.com/TheZeroBeast/TZB-MMU2S-Firmware/releases " V3 Changes combine with R6 stock…
Wydruk około 3,36 €–4,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This design is now outdated, V3 can be found here https://www.prusaprinters.org/prints/66215-tzb-mk3smk25smmu2s-extruder-mmu2s-no-tower-v3 This is for use with PRUSA i3 MK3S, MK3S:MMU2S & MK2.5S printers. Designed to be used with…
Wydruk około 0,88 €–1,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Please click if you appreciate my work :) Retro soul in a modern shell. This 3D printable wall-mounted sculpture captures the sharp, unmistakable lines of the Toyota Celica Supra MK2 – a true JDM classic from the golden era of the '80s.…
Wydruk około 12,52 €–15,30 € nettoWstępna wycena jednego wariantu
New version of Pry Tool with 12mm, 10mm, 8mm, 6mm and bottle opener. Mk2 does not require support.
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
This two-piece stand design is custom made for the Yamaha SEQtrak and Arturia Minilab 3 , so that the SEQtrak is firmly held at a comfortable angle and slightly above the Minilab. I just added a version that works for the Minilab 2 (mk…
Wydruk około 5,80 €–7,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Use this Grid to help optimize first-layer adhesion. G-code file includes a warmup routine to improve accuracy of bed-leveling. The print will appear to do nothing for a minute or two as the PINDA probe warms up via close proximity to the…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
This is ball mount joint for a Logitech C920 camera that allows it to directly attach to the ball nut from the Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2. This allows you to remove the standard mount from the C920 and…
Wydruk około 1,01 €–1,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The original dimensions of this organizer are Z- 100mm X-100mm Y-80mm but you can scale it of course. Print on any settings you want but i printed it on 15% filling.
Wydruk około 6,95 €–8,50 € nettoWstępna wycena jednego wariantu
Y Axis remake for use with bearing mount All parts are based on original Prusa i3 MK2 design. Print instructions y idler requires support. y corners have support build into design. BOM: 4x LM8UU M3 nuts and bolts
Wydruk około 8,62 €–10,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wall Art silhouette model of the Ford GT Mk2. Adjustable size. I accept model suggestions or ideas you might want.
Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu
Created this because I had to replace the Heatbed thermistor since it had a short. I believe it was caused by hitting the lower track and causing it to bend more than necessary ever time it moved back and forth. This will lift it up a…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Die schmalen energy drink Dosen neigen bei unserem Ford Smax leider immer zum umkippen, da die recht groß dimensionierten Getränkehalter für kleiner Dosen nicht wirklich geeignet sind. Also habe ich Maß genommen und eine Art Reduzierhülse…
Wydruk około 2,03 €–2,48 € nettoWstępna wycena jednego wariantu
Greenhouse jar mk2 Turn your empty jar into a small greenhouse for your growing plant. This model is suitable for pot with a 8.5cm diameter and 7cm height. The model is designed to allow you to easily take off the jar for watering. This…
Wydruk około 8,01 €–9,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I frequently tote my Prusa i3 MK3 around, and the frame is a little harsh on the hands with all the weight underneath it. This is a slip fit handle that slides under the frame to add some curvature that makes it easier to carry. I…
Wydruk około 3,35 €–4,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print with .3mm layers and one or two color changes. If you print the bottom with a non-black colour, you can write your contact info there with a marker in case you lose your keys! Have fun printing and don't forget to post your makes!
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
This is a redesign of the open layer so it can be used as a pen/toolholder. For the standoffs you need to set the support to “Support on build plate only”. Assembly is straightforward and should be a press fit, but if it is too loose you…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
Hello, Here is a version of anti-vibration foot which in my opinion offers a good compromise between anti-vibration and stability. I used an old pool filter seal which is very flexible. It measures 6.1mm in diameter (réf. is R152501W - 40…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These are dashboard clips for an Oldtimer. The Ford Transit MK2 (1985). The old clips breaks due the process of long aging and the dashboard cant be secured. These clips fit perfectly into the opening and are secured by the long plastic…
Wydruk około 1,10 €–1,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
In the Ford Transit MK2 (1985) with the dashboard that has a recess for a speaker, I have constructed an insert holder for a BOSE Revolve+. The Mobile Speaker fits perfectly into the insert and can be used as a Remote Soundspeaker in your…
Wydruk około 6,68 €–8,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This mount allows the camera to be installed directly onto the laser frame.
Wydruk około 5,95 €–7,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I reworked this through several iterations, and am finally happy with this iteration. I recommend not using ironing to smooth in your slicer, since this has small features that get gummed up pretty easily. Pin is ~19mm wide x ~23.6mm…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I used this light bar: https://www.amazon.ca/dp/B09N8QQDSP?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_3 Creality LED Light Bar ASIN : B09N8QQDSP Also I have used little bit of electrical tape to make this light snag so it doesn't move. As…
Wydruk około 4,47 €–5,46 € nettoWstępna wycena jednego wariantu
Support me & Buy a T-shirt The Cantilever box is compatible with SBox for MK2/3/4 - stackable toolbox system and is intended for printing on the Prusa MK4 size 3D printer. Assembly list of non-printed parts 16 pcs - metal axis 36( 35 )mm…
Support me & Buy a T-shirt Sizes All three sizes are fitted for the Original Prusa i3 MK2/2.5/3/4 3D printer. Small size - 245x205x80 mm Medium size - 245x205x150 mm Large size - 245x205x220 mm Only small size is equiped with front…
All printable parts for your Original Prusa i3 MK2S. Print instructions: Use Prusament PETG and the PrusaSlicer's default PETG 0.2mm presets.
All printable parts for your Original Prusa i3 MK2. These are the parts for the older MK2 model intended for repairs. See the MK2S printable parts for upgraded parts. Print instructions: Use Prusament PETG and the PrusaSlicer's default…
This is the new and very much improved version of the BC-304 class from the show Stargate. Originally I intended to release it as a remix of the original one, but the changes are quite large so I decided to post it as an entirely new…
Support me & Buy a T-shirt The Cantilever box is compatible with SBox for MK2/3/4 - stackable toolbox system and is intended for printing on the Prusa MK4 size 3D printer. Assembly list of non-printed parts 8 pcs - metal axis 36( 35 )mm x…
Attention: These files are for version MK2. Please check which hardware you have! Please read these instructions completely and carefully. The requirements must be followed otherwise the function of the extruder may be impaired. The…
Printable parts for the MK2/MK2S/MK2.5 to MK2.5S Upgrade. Note this is a legacy download. As MK2.5S is an upgrade for the older MK2, MK2S or MK2.5 printer, other parts not listed in this print are available as the MK2S parts:…
(update) I've added a version with a lanyard hole 3 M3 nuts 1 M3 5mm screw 2 M3 12mm screws I used a Stanley Carbide Blade I recommend using a button head screw for blade retention. Please be carefull with the blades First Step Second Step
Print settings: (Updated 28.07.25) material: PETG Use 4x wall perimeters/layers Use 4x Top/bottom layers … but → Modify for ZERO bottom layers - print it open on the bottom! Fluid in the inside can flow out. Supports for ventile area -…
Update 29.02.24: Grüße geht raus an alle heutigen Geburtstagskinder =)! Danke an @Hanno_1419514 für den Denkanstoß zu der guten Verbesserung die Ventilblöcke einfach unten offen und komplett ohne Infill zu drucken! → (Prusa Slicer) Die…
Print settings: (Updated 28.07.25) material: PETG Use 4x wall perimeters/layers Use 4x Top/bottom layers … but → Modify for ZERO bottom layers - print it open on the bottom! Fluid in the inside can flow out. Supports for ventile area -…
Attention: These files are for version MK2.5. Please check which hardware you have! Please read these instructions carefully. The requirements must be followed, otherwise the function of the extruder may be impaired. The Original Desktop…
Big brother to the mini bed scraper =) Print in PETG and it's almost indestructible. https://www.printables.com/model/55519-bed-scraper-fast-print-15min-minimal-filament-usag/comments/420863
Update 30.12.: Length of srew optimized to 60mm so it fits on any thickness of tables used with the 2 clamps. Before there was a gap of table-tickness the one screw with the both clamps could not cover. Print settings: Clamp with no 4-5…
Using Remix as a reference, I created a model that does not require additional parts such as bearings, bolts, or shafts, and can be produced using only a dry box, PTFE tube, and a 3D printer. Requires 4x: 608 bearings 1x: PTFE tube Φ4mm…
This UPDATED version fixes any problem of the phone falling over and now fits phones of all sizes, it prints on its side and the speed can be cranked up due to its simple nature. It takes about 20 minutes to print and fits the iPhone 16…
Inspired by Toolbox Widget type organizers and based on a similar design by kickit2 on Thingiverse. Fits 12x5mm round magnets in the base (2 pcs 12x2 works as well). There is a single and double of the full size and I added a double in a…
The Cantilever box is compatible with SBox for MK2/3 - stackable toolbox system Assembly list of non-printed parts 4 pcs - metal axis 36(35)mm x (2.8 - 3)mm or M3 screw with internal hex head 8 pcs - metal axis 39(40)mm x (2.8 - 3)mm or…
Printable parts for the MK2 / MK2S to MK2.5 upgrade. Note, these are the parts for the MK2.5 upgrade, not the newer MK2.5S upgrade.
Keep your Prusa i3 steel sheets organized and dust-free with this sturdy, under-table storage solution. Designed for all recent Prusa i3 models with a standard bed size, this holder will not fit the Prusa Mini due to its smaller bed…
Back in Black! For no other reason than because I have more bulk black than white this time. This is the second revision of my canter lever filament spool winder. You can find my first version here , along with the original description,…
Welcome to the Rook 2020 MK2 3D Printer Kanrog who is part of the Rolohaun Design helped created this printer! This is a small DIY beginner friendly CoreXY 3D Printer. This is based on the Rook 2020 MK1 , the frame now uses blind joints,…
Źródło oznaczyło ten model jako treść 18+.
This is an old version. You can find the updated version here . Introduction I'm Seb, I'm a student and I've been working on the idea of 3D printing a skateboard for more than 2 years. The goal was to print both the trucks and the board…
Update: 10_08_25 Uploaded 510 Volcano duct step file Update: 05\04\22 Replaced: WIP_Direct Drive Head Ender 3 Orbiter V2 no Upstand V2_1 as the original conflicted with the mounting plate. Update: 25\01\22 The V1_1 Orbiter Mounts had…
Introduction A while back I designed this other handle for the Einstar 3D Scanner: https://www.printables.com/model/364038-einstar-handle I used the feedback and experiences from that one and designed a new updated model. Of course, it…
New version of Bondtech BMG Prusa Upgrade MK3S/MK2.5S with RHD ver.C fan shroud. I modified the original version model to be easy printable with FDM printers. The original source:…
Original Prusa MK2S to MK3S Upgrade printable parts. Note, this is a legacy download. This is the upgrade to MK3S, not the newer MK3S+.
Original Prusa MK2.5 to 2.5S Upgrade Printable parts. Note this is a legacy download. As MK2.5S is one of the upgrades for the older MK2/S printer, other parts not listed in this print are available as the MK2S parts:…
This 6 cell module tray for starting your seeds, designed to be strong and sturdy so that i can be reused many times, with a large hole in the base to aid drainage and the easy removal of plug (plant) once the plant is ready for…
LCD cover for prusa MK3SMMU2S & MK2S Print instructions LCD COVER STL FILES: 1- You need to download only these files lcd-cover-mk3s_assy.stl or lcd-cover-mk2s_assy.stl knob_assy.stl 2- Split the parts into PrusaSlicer to assign extruders…
Simple filament guide for MK2/S + MK3/S printers. Main design considerations V2 (Green) provide enough gap for filament movement as Z rises higher arm in respect of spool to aid filament path / extruder reduced thickness of arm V1 (Blue)…
This was my first OpenRC Tractor. It's based on the Ebro160d/MF165. After many years since first version, I still think this is a great model, so I improved some parts of the MK2 and released MK2.4. They are not huge changes but they make…
This thing is originally designed by RH_Dreambox on Thingiverse . Thank you to him for putting in the hard work to make this print great. Posted here with conspicuous credit. This fan shroud was designed with Autodesk CFD to create better…
Read: How I Designed a 3D-Printed Laminar Flow Nozzle (2026-08-21) Versions mk1 - 2020-08-31 mk2 - 2025-06-04 mk3 - 2025-06-06 Intro Like so many late-night YouTube voyagers, I was hypnotized by those crystal-clear “glass rods” of water…
Calling all Marvel fans and 3D printing enthusiasts! This is a highly detailed 1:1 scale replica of Tony Stark’s iconic MK-II Arc Reactor from the Iron Man movies – carefully designed with functionality, ease of printing, and an epic…
Hi Mikeo, I have gone all out on this one and have a couple more Titan helmets to upload, I've split it as best I could to eliminate as much of the need for support as possible. But you will need some here and there. I've made the whole…
Here's the new version of my cyborg conversion kit for Dummy 13, aiming to turn the figure into a 30min. Sisters/Frame Arms/Desktop army type of figure while taking advantage of soozafone's great chassis design. The head is a new spin on…
This is a case for the PI camera with fisheye lens and IR light https://www.amazon.co.uk/MakerHawk-Wide-angle-Automatically-Day-Vision-Night-Vision/dp/B07DRH5Y5S REMIX from https://www.prusaprinters.org/prints/3407
Remixed "MINI-knob" (Prusa Mini) and "LCD-knob" (Prusa MK2 / MK3) by PRUSA RESEARCH https://github.com/prusa3d/Original-Prusa-MINI and https://github.com/prusa3d/Original-Prusa-i3 This knob features a smaller form factor, knurled sides…
The Perforated Crate is compatible with SBox for MK2/3 - stackable toolbox system Assembly list of non-printed parts 4 pcs - metal axis 36(35)mm x (2.8 - 3)mm or M3 screw with internal hex head 8 pcs - metal axis 39(40)mm x (2.8 - 3)mm or…
This version is outdated. MK4.1 is available here : https://github.com/mr-kiou/q-pack Open-source version of the proton pack from Ghostbusters. Our goal is to make the best, easy to use 3D printable version of the proton pack from…
Update 2022/04/19 I've created a version of the Mark 3 arms for 2020 VSlot aluminum extrusions. Check out the remix section! Update 2019/10/18 I've imported this project from my Thingiverse account. To make things clearer, only the Mark 3…
Extruded this from original Prusa DXF files. MK42 = Prusa i3 MK2 and MK2S (frame, Y carriage) MK52 = Prusa i3 MK3 (frame, Y carriage, fronat & rear plate) Looking for ALU extrusions? Look here: https://www.thingiverse.com/thing:2838381…
Handy UV and elements cover for your landroid mowing robot. May be easily adapted to different mowers. This is update Mk2. I made it 2cm higher after observing a couple of collisions. Option with ridiculous Cyberpunk vibe provided as…
Can You 3D Print a Skateboard? There are a lot of new features in this updated version (old version) : completely revised instructions material test improvements for easier printing version for Prusa XL or other large printers The project…
Heat or glue here as it will pull out if left in place.
A box to help protect your cables, or help keep your feet from kicking them. Just put a power strip in, plug your devices in, and have a good ol' dance! An update to the Cable Box I previously did. This is Mk2! I remodeled it and have it…
The Crate is compatible with SBox for MK2/3 - stackable toolbox system Assembly list of non-printed parts 4 pcs - metal axis 36( 35 )mm x (2.8 - 3)mm or M3 screw with internal hex head 8 pcs - metal axis 39( 40 )mm x (2.8 - 3)mm or M3…
Here is my design of a Lightbar for the Prusa MK2* & MK3(s). Features: LED's directly powered by the printer Wiring running inside the mount Integrated filament guides for both spool sides On/Off switch Directly wired to the Einsy board…
Original Prusa i3 MK2 to MK2S Upgrade. This is a legacy download.
Its a Streamdeck Holder /Slider for under the Desk V2. 4 Wall 30% Infill 3-4 Solid Top and Bottom Layer Many people had the problem that they couldn't get the parts together. I have now made a recess in the part with an adhesive part.
it's made to be pushed on but works best with a layer off glue on the edge
A cable strain relief for the x-axis for all the Prusa i3 MK2- and MK3-based printers and the Prusa Mini. This model combines some ideas from other models. This version clips to the back of the x-axis stepper motor with a very tight fit.…
Variants This box has two versions, with and without perforated long sides and bottom. Assembly list of non-printed parts 12 pcs - metal axis 36( 35 )mm x (2.8 - 3)mm or M3 screw with internal hex head 12 pcs - 20mm M3 screw with internal…
Holder designed to fit the Dremel 3000. It will also most likely fit the 4000 without any modification. Designed for quick and easy mounting using latches. No tools or screwing necessary. Both brackets have a very snug fit and hold the…
Original Prusa MK2S to MK3 Upgrade printable parts. Note, this is a legacy download. The neccessary hardware for the upgrade is not sold anymore as a bundle. This is the upgrade to MK3, not the later MK3S nor MK3S+.
Just another design for an extruder rotation indicator/visualizer. Print, glue a 8x3mm Neodymium magnet to it and snap it onto your extruder motor. I have used CorrugatorSupercilii's OpenSCAD Turbine Propeller Generator to generate the…
Super simple visualizer that stays out of the way. And it prints in like 5 minutes. Just use a small magnet to mount like all the others.
A Little holder/protector for your BaMaKey TP-iii - from BaMaTech. Pretty self explanatory. The main holder slides nicely into the outer sleeve - like a matchbox etc. There is a recess and a tab to keep it clicked shut - works well. There…
ATTENTION: In order to see if this file works for your 3d printer. Please print the Rail_Test.stl file first. If you downloaded the old files, you need to Scale them down to 10% I've designed this Carbine Kit for the SSX23. The SSX23…
Gets the last drops out but stays attached and doesn't get in the way of the lid. So you can put the near empty bottle back down anywhere, not just in its stand.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Looking for MORE upgrades for your enclosure? Consider doing this one!…
Sizes This box has two sizes, small and medium. Assembly list of non-printed parts 12 pcs - metal axis 36( 35 )mm x (2.8 - 3)mm or M3 screw with internal hex head 4 pcs - 20mm M3 screw with internal hex head 4 pcs - 20x6x2mm neodimium…
I improved my previous model and added an 8x HVAR/ATAR rocket and landing gear. adapted for printing halves which are then settled using two blocks and glued. There are grooves left for the chassis and it also needs to be glued. Can be…
First layer test surface that uses the whole printbed 210x250mm with 0.2 mm height. Can be used to visualize warped / uneven printbeds. The included gcode has the ooze free startcode sequence. Happy printing! Print instructions Ooze free…
Many of the other no touching tools do not have any type of enclosure which we will touch it with our hands or clothes eventually. Even those with an enclosure, it is a separate enclosure so it is not as convenient. This design is…
