24 659 modeli
If you create BambuSlicer profiles feel free to add them here: https://makerworld.com/en/models/221532 The Planter is designed to be printed with a 0.4 nozzle (and the same line width). That way the blades of the spiral will always be…
Hi Everyone: I originally posted this design for a fast-printing modular drawer system on Thingiverse, but quite a few people suggested that I also post it Printables (I can see why. Printables runs so much smoother and the support is…
A new design inspired by the wind and sand of our planet (and other planets to). Used Filament: This model was printed using Urban Grey Matt PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the…
A full set of six unique Christmas tree ornament designs, all designed and optimized to print cleanly and reliably using vase mode, keeping the ornaments light weight, and preventing them from weighing down the branches of your Christmas…
An anti-sphere inspired plant pot, giving it a very spacy and futuristic design loking like it is coming from the year 2148 ! Your plants will love it! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top…
Simple to print key holder that can fit in any household. You print the hexagon platform and any number of keychains you need. I personally used glue for sticking it on the wall, however strong double-sided tape should be more than enough…
I did not make this model, but decided to upload it here so it is preserved. Just in case it gets deleted from official site ( https://projecthailmary.com/ ). 3D Model Print Instructions: Grace Sculpture Keychain This model includes two…
I recently watched Game of Thrones and it inspired me to create such a designe - we hope you like it! Looks great in modern interiors, fits all plants well. Best to print in 2 or 3 layered vase mode settings. Works with most filaments.…
Please consider supporting my hobby. You will make my day! Interested in selling prints of this model? Join my Exclusive Print Seller Tier on Patreon for the rights to list and sell prints of this model . Please note that if you are not a…
Please consider supporting my hobby. You will make my day! Interested in selling prints of this model? Join my Exclusive Print Seller Tier on Patreon for the rights to list and sell prints of this model . Please note that if you are not a…
Author: Prusa Research (Vlado Turek)
This is my design for a case for holding Gridfinity bins. My design goals included: Clean design No Hardware Able to stand on ends and back Contents stay in place Easy to open and securely close Stackable Designed for 3D printing While I…
This model is solid and meant to be printed in “Vase Mode” or “Spiralize Outer Contour.” The model is 7in tall and 5.75in in diameter at the top. The Solidworks model is included if you would like to mess around with it. I recommend…
This fast-printing phone stand has been specifically designed to print in ‘vase mode’ (and 0.8mm line width) to allow for very fast printing and low filament usage, whilst maximising strength and stability. Key features: Very fast to…
~ Design collaboration with Azurefilm ~ A nature inspired plant pot! We hope you enjoy it as much as we did design it! Used Filament: This model was printed using Sage HS Matte PLA from Azurefilm. The Azurefilm team was so nice to send us…
A simple design with a very characteristic feature of an inverted hexagonal pattern on its exterior Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters…
Please note: This is an adapted version of my Raspberry Pi 3 case ( https://www.prusaprinters.org/prints/4038-malolos-screw-less-snap-fit-raspberry-pi-3-model-b ) that I modified to fit the Raspberry Pi 4. I do not yet own the Raspberry…
A nice tradicional pot and planter for plants or flowers. Best to be printed in 2 or 3 layered vase mode settings - material: PLA Happy printing! :D
A simple mosaic inspired geometrical plant pot for your house plants! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
COMMERCIAL LICENSE // UNLOCK ALL FILES ====================== PRINT INSTRUCTIONS 6-12% infill 15% infill for tray 5 top layers 8 top layers for tray 2-3 outer walls. Tree supports for tray, build plate only. Fuzzy skin enabled for…
Scarbo SVF1 Model has functioning doors, suspension, steering, shifting and moving engine pistons. Based on a modern replica of 1967 Ferrari 312 Formula One. No supports, except for the exhaust pipes. Everything is designed to be simply…
A geometric vase with a bold, iconic zigzag pattern. This design plays with your perception through its angular motif that creates visual movement across the surface. The zigzag lines flow seamlessly across the entire form, creating a…
Modern Wavy Vase Added files for vasemode and a solid wall version. If you want to support me or get a commercial license for this model, you can join a patreon membership: https://www.patreon.com/SabreDesign Check out more of my designs…
It's time for the first Christmas decorations of the year. With this mini Christmas tree for the shelf, windowsill or desk, the first Christmas spirit will come. The tree with its base plate fits exactly over an LED tea light, so that it…
It finally happened! The day every 3D printing enthusiast dreams about. My girlfriend walked into the room on Wednesday evening, showed me a picture of a lamp, and said “can you design and print something like this for me”. Little did she…
These files are for Personal Use Only . If you would like a Commercial License to sell prints made from these designs, please join me on Patreon : https://www.patreon.com/kazitoad This Christmas tree is made for last minute holiday…
Simple model(1:18) kit card of Golf GTI mk1 with twin headlights. It's not a completely accurate model, it's more of a puzzle. The recommended material for printing this model is PET-G, but it is not a condition. Good adhesion to the bed…
iPad Halter in einem geschwungenen Design. Auf den Bildern ist der Halter mit einem 12.9 Zoll iPad Pro zu sehen. In der Mitte habe ich den Halter ausgenommen, damit mit dem Finger der Bildschirm nach oben gestreift werden kann. Der Halter…
If you're running late with your Halloween decoration or just don't want to use up half a spool of filament for a decent sized pumpkin then these models were made for you! I've designed these Jack-o'-lanterns as a late entry for the…
There are several options for stems to attach to my Spiral Vase Rose print, but I wanted to see if I could design one that prints in spiral vase mode. I think this turned out fairly sturdy for a vase mode print; it also looks cool printed…
I needed a way to hold my sponges that allows them to drain and dry easily (not stacked up on top of one another), so I designed this quick model. It holds a scrub daddy (I cannot recommend this enough), a regular sponge, and another item…
A nordic run symbols inspired plant pot. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a lower layer…
276 individually scanned low poly people, models are shared from multiple authors under the CC attribution license. For more info on individual licenses see Loïc Norgeots sketchfab page (original author link). I split, rotated, and…
Sample model for Original Prusa MK4. Designed to be printed entirely without supports. Featured in the Prusa Academy postprocessing course . Author: Prusa Research (Vlado Turek)
A simple but stylish, 70's inspired designer plant pot or planter. Present's itself best in matt fillaments and in light colours. Best to print in vase mode settings with 2 or 3 outter layers (thicker than regular vase mode). Works with…
A simple but playful design inspired by the small patterns of paws pressed on fresh concrete. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for…
2.4 : 1 Scale Study Model of a Cylinder Lock I made this illustrative model of a keyed lock to help you understand the function of the door opening and closing mechanism. Video assembly instructions: I've always been fascinated by…
I decided to have some fun with the Soap Dish challenge, and design something that hit both the form and function while being incredibly easy to print - and I like how it turned out enough that I'm going to use this in my own home! I…
We know some of you have been waiting for this quite some time, so here it is! - The new Anti-Sphere Pot 2! (now with only 9 spheres in a row) Used Filament: This model was printed using Gunmetal Matt PLA from FormFutura The FormFutura…
Thread Design This standardised thread is called PCO28 and is produced in two versions. PCO28 1810 - the original standard (point of this article) PCO28 1881 - the newer material-saving version with a shorter thread. My problem was that…
A simple but characteristinc design for a modern headphone or headset stand. Great to display or rest your device on your desk. Best to print in - no special settings required, standard print settings are just fine Happy printing!
Skyscraper modeled onscreen on YouTube. I used PLA, 0,10 mm layer height and 0.4 mm nozzle. You dont have to use any supports and 5 % infill is fine. In this configuration, it will take roughly 17 hours to print.
This planter was inspired by an instagram post by pimnynkeprint , where they had designed a planter to look like a classic terracotta planter. I thought that was such a cool idea, and a very classic look, but I wanted to put my own spin…
With nozzle 0.4 mm you can set external perimeters to 1.2 mm and layer height up to 0.3 mm. With nozzle 0.6 mm you can set external perimeters to 1.7 mm and layer height up to 0.44 mm.
Author: Prusa Research (Vlado Turek)
A quite unique 80's style plant pot design inspired by the amazing film called The shining! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a…
Źródło oznaczyło ten model jako treść 18+.
After printing hundreds of originals, I decided to re-model it myself to make some small tweaks and changes. The original OpenSCAD code resulted in slightly misaligned tolerances, needing the tolerance to need to be set higher than…
A Pencil Holder with a wavy texture, designed to be printed in vase mode. Print time: 1 - 2 hours at 100% scale (depending on settings) Dimensions: 6 x 9 cm (diameter x height) If you have questions, feel free to contact me. Happy…
About I really love original Silica gel spool container by @gdrag. However I wanted to achieve Three additional goals: Make a spiral (vase) print to reduce filament and time, Add some distance between side holes and internal wall of the…
Advancent error planter or pot fo your plants. The main idea for the structure comes from a great and lovely designer here - Extrutim - He was so kind to allow me to turn it into a pot design (once again big thanks for that!!!)…
A radio-controlled fishing boat that is suitable for exteriors, for example on a lake. The boat is almost 68 cm long, 20.5 cm wide and approximately 28 cm high. Parts of the boat are designed so that they can be printed on the MK3…
A simple yet modern design of a distorted plant pot. Print information: Recommended vasemode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a…
I made another samurai inspired mask. This one is a bit bigger so it should fit wider faces without any resizing. Since there are some thin areas, to keep it light, scaling down should be done only after you verify with you slicer. Had A…
A plant pot inspired by the perfect structure of bismuth crystals. Used Filament: This model was printed using Brass High Gloss PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the pleasure to review…
A quick and that simple design using a generated voronoi structure, resembling the structure of a pyrite cluster. Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3…
A lovely gift from the bottom of your heart. A plant pot fit for Valentine's Day. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger…
The original hexagonal vase more planter is one of my most popular planters. I see the appeal… the 3D printing community loves hexagons. But it always bothered me that it prints in two pieces, making it not a true vase mode model. So I am…
V2: Version 2 is now available! The pinch grip has been removed and replaced with a hook to launch the glider with a rubber band. A rubber band holder/handle is also included. (Gif of V2 flying has been added at the bottom of this post!)…
A simple geometrical design for your lovely house plants. Used Filament: This model was printed using Gunmetal Matt PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the pleasure to review this…
I made this dock for my Apple Watch Series 4 with 44mm and it fits like a charm. I also tested it out with the 40mm version (3rd image) and it also fitted very good. It also fits all other Apple Watches (also Ultra), cause the format…
The Ikea Skadis pegboard is cool, and cheap, and quite functional, but at the same time, its accessories are quite expensive. When I moved into my new apartment, I got three of them in order to store a bunch of stuff on the wall of my new…
Print the model in spiral vase mode. Parameters batteryD = 14.7; // battery diameter height = 16; baseHeight = 0.8; wallThickness = 0.4; // nozzle size space = 2; columns = 5; lines = 3;
🐾 Abstract Minimal Animals – Forest Set (Low Poly) This set includes four minimalist low-poly animal figures designed in a clean, modern geometric style: Fox, Bear, Deer, and Wolf . The models are intentionally highly simplified ,…
This special Prusa Edition of the TerraPi SSD Case for the Raspberry Pi is to celebrate the 2 year anniversary of the release of the original TerraPi SSD case. The model prints without supports in under 2.5 hours. Best used materials are…
A simple design that everyone could enjoy. Inspired by a simple wave structure. Used Filament: This model was printed using PLA MINERAL Concrete from Fiberlogy. The Fiberlogy team was so nice to send us some samples of their filaments and…
Why not enter a contest, am I right? I don't typically keep my phone on a stand, but every once in a while, I do need to have it propped up. This stand was designed to be very easy and quick to print (just 30 minutes!), and like a lot of…
A new take on my previous design - i changed it into two vases. They fit well togheder especialy printed in two diverent fillaments. Easy to print in vase mode (1 or 2 layers) - filament PLA/ASA Happy printing! :D
These are watering “bulbs”. They can be filled with water and the spikes inserted into soil to keep it hydrated over a longer period of time. They are excellent for plants that need consistently moist soil and are quite easy to print.…
Modern 80's themed pot and planter for your house and garden plants (mostly inspired by bubble gum) Print settings: Vase mode (best to print in 2 or 3 layer vase mode [regular vase mode just with more outter layers]) Used materials:…
Simple spinning plant pot or planter for your house plants. Best to be printed in vase mode (2 or 3 layers) - Prusament PETG - Mango yellow
Train station model created in Fusion 360 from a project foundable on http://www.smpd.cz/olympia/projekt.html Print instructions For easy printing, model is sliced to 4 parts which can be easily glued together.
A very nice and modern indoor or outdoor flower/plant pot - easy to print in 2 or 3 layer vase mode. Your plants will love it! Happy printing! :)
A modern approach to the wavy style plant pots with the use of parametric settings. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a…
An elegant attempt at rethinking a traditional Christmas tree Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended…
A simple organic, bohemian inspired design, that will fit your plants very well. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger…
After having no luck slicing an existing level 7 Sierpinski fractal pyramid, I generated my own using OpenSCAD. OpenSCAD took nearly a day to generate a level 6 pyramid, so I almost gave up until I found there was an experimental Fast CSG…
Simple spinning plant pot or planter for your house plants. Best to be printed in vase mode (2 or 3 layers) - Prusament PLA - Gravity Gray
An Art deco ispired planter or pot for plants. Best to print in vase mode (can be single or dubble layered - depends on the size) Happy printing! :D
An antique inspired plant pot design with the fill of quilted fabric Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outter perimeters - for a stroneger print)…
This is the fixed file of the original, doesnt have any 0-20 degree angles so prints nice in vase mode. That is with its height of 75mm, resolution of 0.1mm, 0.4mm nozzle. Enjoy Print instructions Prints nice in vase mode. That is with…
A lot of you have requested that so here it is - a regular pattern Paw Pot design! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger…
An easy to print vase mode design inspired by the famous companion cube from Portal 1 Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a…
This model is the V2 version of the original VasePlane which can be found here . This glider is inspired by the stereotypical single seat fighter jet appearance and has a hook just under the nose so that a rubber band can be used to…
Look there is a zebra in the wild!… Oh no, it is just a plant pot. But it looks amazing! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a…
A Flower Bouquet Vase designed for Vase Mode printing. For a sturdier print (Thicker Wall), use the following settings: Set the number of perimeters and bottom layer as you like, Set the top layer to "0" (no top layer), Set the infill to…
Pineaple + Crown = An idea that poped into our mind a few days ago and we created a pot design out of it! Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 2 or 3 outter perimeters - for a…
This is a stubby nozzle for the Milwaukee M18 FUEL Blower. This nozzle is for the NEW blower model (3017-20) that Milwaukee just released in 2024. I couldn't find one available for this model yet, so made my own. I was able to get it to…
Tired of pistachio shells making a mess? This smart 2-in-1 container is the perfect solution. Designed with a clever dual-compartment system, it keeps your snacks and shells separate: the top holds pistachios, while the inner compartment…
"There are so many spiral cups and planters on this website, why would you design another one?" Well… first of all, hello. I am glad you asked. Like, I am sure, so many other designers, I frequently see models online and think “I like…
A simple design with a very characteristic feature of a hexagonal pattern on its exterior. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a…
After the positive feedback on my first samurai mask I decided to make another one on the subject. The design is similar yet different enough that this one is much easier on support material use and is also faster to print. Print…
1:200 Desk Model of the Boeing 777-9X.
We thought that our previous design of the greek column pot isn't fitting our new standard so… here is a new better version! We hope you will enjoy it as much as we do. Print information: Recommended vase mode or semi-vasemode settings…
A sci-fi cubic plant pot or planter for your plants. The design is inspired by the amazing Subnautica series! Mainly by the Precursor structures. Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 2…
Simple yet very designful plant pot inspired by the structure of a greek column. A new design series called Ancient design is here! - there will be more such pots in the future - let us know what do you think about it! Vase mode print…
A moder take on the tradicional star plant pot - will fit your plants and interior beautifuly! Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 2 or 3 outter perimeters - for a stroneger print)…
About I have envisioned this chess set for quite a while, inspired by fire and steel. Since I was limited to plastic as a medium, I experimented with the board’s texture and surface patterns to achieve a metallic shine. For the black and…
The seashell model was made out of a 3D Scan. Printing: The seashell model was printed upright with support to have a higher resolution on the surface.
