Liczymy pasujące modele…
Mouse knight miniature. Designed to print without supports on an FDM printer. I used 0,2 nozzle and 0,8 mm layer height. Visor part of the helmet may be slightly chipped, especially on matte materials, may be needed to clean it a bit. If…
After having the scroll wheel break on my Logitech Anywhere MX mouse while it was in it's soft case in my backpack, I set out to make this hard case so I can throw it in my bag and not worry! My first step was to use my school's 3d…
Simple Mouse Figurine - Perfect Desk Decoration Print this charming mouse figurine to add a touch of joy to any space. Requires minimal supports which are easy to remove, making post-print cleanup a breeze. Enjoy your print and bring a…
Escultura de acción del clásico personaje Super Ratón ( Mighty Mouse ) es un personaje animado parodia de Superman, creado por el estudio Terrytoons que debutó en 1942. La historia comienza cuando un ratón común se transforma en un…
This is the mouse I bought Nulea M501 Kabellose Trackball Maus, Wiederaufladbare Ergonomische Maus, Präzises und Reibungsloses Tracking, 3-Geräte-Verbindung , Kompatibel für Mac, Windows.: Amazon.de: Computer & Zubehör 2 pieces m8 hammer…
Printed on MKs3+ with Prusament PETG 25% infill Organic supports
After having the scroll wheel break on my Logitech Anywhere MX mouse while it was in it's soft case in my backpack, I set out to make this hard case so I can throw it in my bag and not worry! My first step was to use my school's 3d…
Does NOT work with the Scimitar RGB as it has different layout for the main buttons and screws. Unfortunately, without buying one I cannot make a model specifically for that one. It works with Scimitar RGB Elite, and should work with…
It's quite possible to use a mouse right on the chair arm without any mods, but with this addon, it becomes even better.
Adapter to combine a ducky macro pad and spacemouse into an easy to reach
We made this bristle bot as part of a Harry Potter themed birthday party, where the kids could make their own Scabbers pet. The project requires soldering and the use of hot glue, therefore adults are needed for assistance and…
Hello. This is my remix for a Logitech mouse m650 stand/holder.
2026 Version 2 Update: I optimized the original version for ease of printing. This version has small bridges for the wire channel built-in to the model as shown in the gif. By adding bridges and removing the contour from the bottom of the…
Combination of dome and the large knob for the SpaceMouse Mini v3 so you only have to print one piece and save 4 screws.
Simple Mouse Figurine - Perfect Desk Decoration Print this charming mouse figurine to add a touch of joy to any space. Requires minimal supports which are easy to remove, making post-print cleanup a breeze. Enjoy your print and bring a…
Took a very popular model and added a notch to the front to help with taking the lid on and off!
You need to calibrate the tolerances to print good and i recomend to put organic supports.
Made so it fits a Logitech G502. You can easily grab it from underneath.
For the flat models, print flat-part down, Organic supports, supports on build plate only. For the Skadis models, print flat/skadis down, with either: Organic supports, supports on build plate only. I have an MK4s and set “Overhang…
im gcode und im 3mf ist der Pflanzenbehälter schon mit einen Hohlraum versehen in the gcode and in the 3mf the plant container is already provided with a cavity
Arduino code: https://github.com/AndunHH/spacemouse !!!buttons must be manually activated and set!!!
A Mickey Mouse shaped frame made on a lasercutter out of 3mm plywood, 3mm perspex, 3mm Cork tile, black fabric and M3 blots. This will allow you to display your Disney pin trading collection on the wall without the worry of them…
Printed at .2 layer height with organic supports for the little tabs. Upgraded model should fix the gaps shown in the photos. I just didn't bother to print another one because this one works, it's in a place nobody sees, save materials…
Recently started with 3d printing, so if anyone wants to make a 3d model of the design. go for it
to view it in 3D ---- https://my.spline.design/untitled-4Xvquytd0Cl3YziMcCHIBAHG/
Printing Information: Use tree support to support the voronoi structure. Use a brim to improve the contact surface with the printbed
This model is designed to take a USB C port for a detachable cable. A version is available with an opening for a regular USB port for the wireless dongle. Uses two M3 bolts as contacts, make sure your bolts are attracted to magnets and…
ENGLISH VERSION: * German version below * Replacement for your Apple Mouse (version 1) battery cover. Designed to fit perfectly, this cover snaps into place securely and features an embossed Apple-style icon for a clean, elegant look.…
This is a lightweight mod for the Logitech M720 Triathlon. I measured a 30g difference on my mouse, and aftermarket feet make it feel even better but are not required. A bit of sanding may be required in the base's battery compartment.…
I'm really glad you like it! Please support me by liking and downloading it.
I've been carrying my M650 L mouse around in my backpack and didn't want it to get damaged. This housing sits in the backpack (with the mouse oriented on its side) and with the relief on the bottom it's easy to get a finger underneath to…
This is a remix of DavisSgt's zerømouse mod for the Logitech G102/203, which was initially inspired by optimumtech . DavisSgt's model will not fit if your G102/203 is the 2ⁿᵈ generation LIGHTSYNC version. You can verify by checking the…
This is a mouse pad for a computer. I printed with PLA. If you do print it, please leave a comment on how it went. Leaving a like would help a ton!
DIY Mouse charging dock which works with any logitech mouse that is Powerplay comatible as it uses the two charging connectors on the bottom. Part list: 3D Printed parts: 1x Base 1x Coin 1x Body Electronics: 1x TP4056 usb-c board 2x ~5cm…
ESP32 Bluetooth Maus für Fusion360 Es Gibt 2 Deckelversionen und 2 Drehrädchen. Die 2 Deckelversion hat beide Tastknöpfe aus dem ESP32 nach außen geführt. Eine seitliche Klappe um das USB Kabel zum Programmieren / Oder Seriell daten…
Dust Cover for the 3dconnexion Spacemouse Enterprise if you have a large enough printbed, you can use the “CoverSpacemouseEnterprise” file. otherwise, use the “…interlock_p…” Files and superglue it together.
Design Concept The Container Box for the 3DConnexion SpaceMouse features a compact and sleek design ideal for securely holding the device while not in use. It ensures the safety of your cherished SpaceMouse during transport or storage.…
UPDATED VERSION ON MY PROFILE Printed from PETG with supports. 8 magnets 5mm diameter 5mm height press fitted. I cleaned every hole with drill before pressing.
This is a replacement rear slider foot for the Microsoft Arc Touch mouse - Surface Edition. I modeled it in FreeCAD and printed it with a Prusa MK4S. It took several iterations to get it to fit correctly. I printed it with PLA to get…
notes: scroll wheel not 1:1 power switch not accurately modeled sensor lens is not the correct model (L0AE-LSI1 lens instead of the LM19-LSI used in the beastx 8k) stl is not updated but additional components are i cannot guarantee that…
Edit 15/2/2026 Added Back V2.1, with a bigger 7mm rear skate land and a much improved side button(s) holder Added a V2 for the front. USE 1 WALL THICK TREE SUPPORTS Added a scroll wheel support with larger screw holes. Forcing screws into…
Mouseling warrior miniature. Designed to print without supports on an FDM printer. I used 0,2 nozzle and 0,8 mm layer height. If you want to support me and get access to my weekly posts, please visit: https://www.patreon.com/cw/Umarty
Mouse knight miniature. Designed to print without supports on an FDM printer. I used 0,2 nozzle and 0,8 mm layer height. Visor part of the helmet may be slightly chipped, especially on matte materials, may be needed to clean it a bit. If…
Mouseling ranger miniature. Designed to print without supports on an FDM printer. I used 0,2 nozzle and 0,8 mm layer height. If you want to support me and get access to my weekly posts, please visit: https://www.patreon.com/cw/Umarty
Mouseling wizard miniature. Designed to print without supports on an FDM printer. I used 0,2 nozzle and 0,8 mm layer height. If you want to support me and get access to my weekly posts, please visit: https://www.patreon.com/cw/Umarty
Mouseling rogue miniature. Designed to print without supports on an FDM printer. I used 0,2 nozzle and 0,8 mm layer height. If you want to support me and get access to my weekly posts, please visit: https://www.patreon.com/cw/Umarty
Mouseling druid miniature with skull mask on its face. Designed to print without supports on an FDM printer. I used 0,2 nozzle and 0,8 mm layer height. If you want to support me and get access to my weekly posts, please visit:…
Mouseling bard miniature loosely inspired by Dandelion from witcher series. Designed to print without supports on an FDM printer. I used 0,2 nozzle and 0,8 mm layer height. If you want to support me and get access to my weekly posts,…
Mouseling paladin in plate armor miniature. Designed to print without supports on an FDM printer. I used 0,2 nozzle and 0,8 mm layer height. If you want to support me and get access to my weekly posts, please visit:…
Mouseling barbarian miniature. Designed to print without supports on an FDM printer. I used 0,2 nozzle and 0,8 mm layer height. If you want to support me and get access to my weekly posts, please visit: https://www.patreon.com/cw/Umarty
Mouseling knight riding his loyal bird. Heavy armor is inspired by "The Rat" from Stronghold series. Base is 1,5 times wider than standard. Designed to print without supports on an FDM printer. I used 0,2 nozzle and 0,8 mm layer height.…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
This model is designed to catch mice effectively and continually for areas like sheds or garages where there are many mice. It boasts a weight configurable counter ballast, magnetic coupling, and a number of small enhancements that…
Support Qube 540 for 70mm width mouse. Collections available Losi MicroT Spinner & Fidget Arrma RC Earrings
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com. You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Keep all your mice in one place with this 4-slot mouse holder featuring built-in dongle storage. Designed for gamers, creators, or anyone who switches between multiple mice. It securely holds your mouse and the integrated dongle…
Features It opens It has a timer It is screen accurate (does not explode) Other Parts Egg timer Hinge Magnets (3/16" diameter, 1/8" thick) Instruction Print one of everything Take apart the egg timer. Screw the Timer Connector onto the…
Mouse case consists of base and cover. Magnets are used in this model 5mm diameter 5mm height 4pcs for cover 5mm diameter 2mm height 4pcs for base (pause necessary to insetr magnets) CHECK POLARITY BEFORE PUTING MAGNETS IN PLACE Test…
This ergonomic case has a few features, a 5 degree downward slope, a thumb grip, and a hand shape to the back.
A Mickey Mouse pumpkin head lamp for the MH001 lamp kit from BambuLab or similar (search lamp kit on aliexpress). It is relatively looser fitting with retention fingers so other lamps can fit. It features a large central pumpkin with two…
Using supports for something this small is helpful as the stick will not print properly. I enhanced/thickened stick from original model.
This is a custom wall mount for the Alienware AW610M Gaming Mouse , designed specifically for the IKEA Skadis pegboard system. Designed with 3D Scanning This model represents a new level of precision in my design process. I used a CR-Scan…
Meet this sneaky little mouse, caught mid-scurry. Small, simple, and full of character, this tiny critter is perfect as a desk buddy, shelf decoration, or a playful surprise print. Easy to print, fun to paint, and guaranteed to make…
Caught red-handed… with cheese. This tiny mouse is proudly holding its favorite snack and has absolutely no regrets. Cute, funny, and full of character, it’s perfect as a desk buddy, shelf decoration, or quick fun print. Small print, big…
100x160mm sign, showcasing the ACME Giant Mouse Trap. Also effective on other large and less thoughtful mammals. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in…
Someone wanted a little print of mouse art but with slots for microcentrifuge tubes. Yes, it looks kind of like a chameleon with the curly tail. If any prints are made and people would like a modification to the design, let me know.
Some Logitech mice are known to develop scroll wheel issues over time. The pin/rod that rotates the scrolling mechanism inside gets worn out after a while and starts skipping. I used to buy replacement wheels online but they also tend to…
A snug travel case for your Logitech M705 wireless mouse. Print the case body on the butt, so that the opening is facing up. The lid is available with and without the Logitech text.
I made this using the referenced base model as a starting point in Shapr3D, but that only allows low res exports. It's super ugly, and it also rocks a bit because the overhang is huge! I'm probably going to cut up some PTFE tubing and…
Hi, Here is my TV / monitor mount for joy con grip and mouse accessories for Nintendo Switch 2 For monitors with frame max. 15mm thick
Had meshy help me make a psycho Minnie mouse who has beheaded spiderman and holding his head as a trophy. Once i got it from Meshy I took her to blender and added my own little touches and this is what I ended with.
I am practicing op18kv2 mod. model has been adjusted to fit my A1mini. bottom surface is fitting 0.8mm thick feets.
Link to my collections (Animals, Fantasy, etc.) ❤ https://www.printables.com/@Paja/collections/3327454 🖨 Technical Information The model is printed from PLA material . Nozzle size: 0.40 mm Layer height: 0.20 mm ( Recommended 0.15 mm for…
![TT SpaceMouse V2 - mounting for 4/8 MX Switch adapter [45 degree angle]](https://media.printables.com/media/prints/c17b23dc-4d91-42ab-b530-3f59bf4e5afd/images/9338696_b5b10274-5e00-4788-a390-84c0ce7ae1fc_02b600ec-7495-4f4e-bac0-cebd85aa2af0/render-test.png)
