Wyniki wyszukiwania: msc

Red Dot Agled Offset Mount for RMR / RMRcc / RMSc footprints

The DoomScroller, a smartphone tripod for the COVID-19 pandemic

Moved to GitHub 2024-01-10: All future updates will come through GitHub: https://github.com/jon-le0234/DoomScroller The work started growing too fast to manage two projects each on Thingiverse and Printables, so moved everything into one…

Circumscribed Prismatic Stairs

A stack of prisms where the circumradius of each is the inradius of the prism below it. Prism heights are all the same.

Circumscribed Prismatic Tower

A tower of prisms where the circumradius of each is the inradius of the prism below it. Prism heights are equal to the edges of the decagon at the bottom.

Christmas Tree Ornament SPHERE (80mm round) with Cap (Weihnachtsbaumschmuck)

This 80mm christmas tree ornament sphere has a very nice shape and is easy to print. I recommend to use metallic filament for an even better look as mentioned on the pictures. Available in TWO versions with SLIM & MEDIUM fins. The cap is…

MSCHF Big Red Boots

I don't know much about fashion, but I've been told these Big Red Boots are the pinnacle of fine footwear fashion. Since the real ones are expensive, here's a slightly smaller pair that you can print to try them out first.

Quick Clamp / Klemmschelle M16, M20, M25, M32

Quick clamp for protective tube Klemmschelle für Schutzrohr Printing information Layer height: 0.32mm (0.6 nozzle); 0.20 (0.4 nozzle) Infill: 15% Support: none Brim: recommended I am looking forward to your Makes! :-) If you like this…

SRAM Umschlingungswinkel/ Chain Gap Tool SRAM

English below Du hast deine einstelllehre von deiner Schaltung verlegt, sie ist kaputt gegangen oder dein Nachbar hat sie sich ausgeliehen und nie wieder zurückgebracht? Kein Problem, Druck sie dir einfach selbst. Ich habe sie gedruckt…

Haken für Weihnachtsbaumschmuck Kugelaufhänger S-Haken Aufhänger Christbaumkugel Hacken Schnellaufhänger Kugelaufhänger cristmastree ornament hangerWeihnachtsbaumschmuck

Einfach nur Ausdrucken und fertig :-)

Ruger Mark IV Low Profile RMSc mount

I found the stock pic rail from Ruger to be too tall for reflex sights so I designed a low profile mount for RMSc. No special printing needs as .22 is low recoil and this should hold up fairly well.

Christmas Tree Ornament (85mm) with Cap (Weihnachtsbaumschmuck)

This 85mm long christmas tree ornament has a very nice slim shape and is easy to print. I recommend to use metallic filament for an even better look as mentioned on the pictures. The cap is made for all XMAS ornaments with a 14mm top.…

Trash Bag Holder Dispenser XL Plus for large 6"/150mm diameter trash bag rolls (SamsClub Hefty 33 Gal Rolls)

I wanted a larger version of the well designed, sturdy, simple to print original Trash Bag Holder XL. Large 33 gal trash bags in family size boxes from Sams Club, Costco, BJ's etc will fit in this larger version. I also added mounting…

Capybara With MSCHF Boots

ORIGINAL DESCRIPTION: Basically, this is a Capybara with the famous MSCHF boots. I got the MSCHF boots file from this guy: https://www.printables.com/model/400756-mini-big-red-boots

Christmas Tree Decorations - Weihnachtsbaumschmuck

Just a few decorations. Another Christmas Decorations (Angels): https://www.thingiverse.com/thing:4655161 Buy me a coffee Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: Doesn't Matter Supports: Doesn't Matter Category: 3D…

Christmas Tree Ornament STAR SPHERE (65mm round) with Cap (Weihnachtsbaumschmuck)

This 65mm christmas tree ornament STAR SPHERE has 12 stars standing between the nice shaped fins. Very easy to scale & print. I recommend to use metallic filament for an even better look as mentioned on the pictures. The cap is made for…

Clamp for cable tubes / Klemmschelle 20mm

Clamp for fixing a 20mm cable pipe (Installationsrohr, Panzerrohr, Kustoff-Stangenrohr) on walls or ceilings. There are two versions, one ordinary and one with support for a 10 mm c-profile-rail. Print instructions Use uv stable filament…

Bahn Hemmschuh Schlüsselanhänger/Flaschenöffner

Nachbildung eines Hemmschuhs der Deutschen Bahn als größerer Schlüsselanhänger oder Anhängfer am Rucksack mit Flaschenöffner Funktion. Print Settings Printer Brand: Anycubic Printer: i3 Mega S/Pro Supports: No Resolution: 0,2 Infill: nach…

5015 Hotend fan mount for Sovol SV06 (remixed from MSchwarz's model)

After printing and using MSchwarz's model for a while, I noticed the top cooling fins get little to no air movement, so I decided to spend a few minutes in cad and change the piece a little bit. The duct widens as it gets to the fins and…

Raspberry HQ Camera to AmScope adapter

Raspberry Pi HQ (and similar) cameras adapter for AmScope Trinocular microscopes. It threads into the camera's C/CS-mount (no lens required) and reuses the tube+knob focus mechanism on the scope. Single piece, prints without support and…

Rohrschelle Klemmschelle 40mm

aus PETG gedruckt

Microscope Eyepiece Cover for Amscope Microscope

These little eyepiece covers sit on top of your eyepieces, preventing dust from falling on them while idle. Print flat, so that warping is limited, and they should print with no problem.

msc seaview/seaside

Je l'ai fait en deux parties, mais vous pouvez également le faire en une seule à plus ou moins grande échelle. Ce n'est bien sûr pas aussi génial pour certains modèles achetables.

Parametrierbarer Christbaumschmuck-Haken – in 6 Größen + anpassbare Fusion-360-Datei

Dieser hochwertige Aufhängehaken ist die ideale Lösung, um Christbaumkugeln, Dekoanhänger oder kleine Bastelprojekte stilvoll und sicher zu befestigen. Das Design ist stabil, formschön und speziell für eine zuverlässige Aufhängung…

star tree ornament - Stern Baumschmuck

es gibt eine größer und eine kleinere Version Druck: 0,2 mm Düse: 0,4 mm Unterstützung: Nicht erforderlich Rand: Nicht erforderlich Infill: 0% Schöne Weihnachten!

Fernbedienung Halter für Siri Remote, Samsung One Remote, Hue Dimmschalter.

Passend für: -Siri Remote (3. Generation) und (2. Generation) -Samsung One Remote -Hue Dimmschalter

Amscope / Eakins Microscope VESA/monitor Mount

Wanted to clear up desk space and mount the scope to a monitor arm instead. You'll need to find a bolt that fits the back of the scope mount that's moved over to this vesa mount. I suggest you use a pick to pull aside the clamping spring…

Keimschale für Mungbohnen etc. | Sprouter for mungbeans e.g.

A simple germination tray for germinating mung beans and other sprouts with a base tray and any number of stackable germination trays. Printed in PETG with a 0.6 noozle in 0.4mm @ 60mm/s. Temperature of bed like always with Sunlu PETG @…

Snowflake Ornament for Christmas Tree / Schneeflocken Christbaumschmuck

A simple ornament of a snowflake. Easy print. I used matte PLA for it. Have a look on my christmas collection on makerworld.

Amscope to camera module adapter

This is a double-threaded adapter to screw a camera module (C-mount 1"-32 UN 2A) on top of the trinocular Amscope extension tube (M26/0.75) you can find on models such as the SM-3TZ-54S. The OpenSCAD file is available and all dimensions…

Hemmschuh / Bremse / Keil für Bürostühle

gedruckt in PLA mit 15% infill

Amscope Eyepiece Eyeshields or Eye-guards 32.5mm TPU

Eyeguards for microscope eyepiece with 32-32.5mm width. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: Any TPU Any Notes: Supports are required If you have issues with…

35 Schneeflocken Aufhänger Baumschmuck Weihnachten

Verschönere deinen Tannenbaum mit einzigartiger Dekoration. Meine Schneeflocken findest du in insgesamt 35 Varianten. Du kannst für dich entscheiden, wie du das Druckbett füllst. Schnell und einfach gedruck, als Geschenk,…

2-in-1 Fensterstopper: Sturmschutz & Katzensicherheit / 2-in-1 Window Stopper: Storm Protection & Cat Safety

DE Dieser selbstkonstruierte Fensterstopper bietet doppelten Schutz für dein Zuhause. Er verhindert zuverlässig das ungewollte Zuschlagen von Fenstern bei starkem Wind und dient gleichzeitig als Sicherheitsmaßnahme, um Verletzungen deiner…

Taurus TX22 RMSC Red Dot Adapter Plate V1

6/15/26 Finished version 1. 11/10/26 Just had a plate shear off, it seems the dovetail wasn't doing much and the counterbored hole ripped out, a bigger screw may have prevented this. I don't have time to fix this currently, so watch out…

Arrma Big Rock/ Granit Schlammschutz

Schlammschutz für Arrma Big Rock/Granit

RMSC cover plate

Couldn’t find any free models so I decided to make a couple cover plates and provide a step file for anyone who needs it. Category: Other

Philips Hue Dimmer Switch GIRA System 55 Adapter Plate | Dimmschalter Adapterplatte

EN: If you don't want to pay 70€ for a friends of hue switch from senic and gira , but want the “gira-look” you can print this adapter plates. All you need to buy is a GIRA double frame without middle bridge (either GIRA 100203 for…

Christmas Tree Decorations - Weihnachtsbaumschmuck 2021

Buy me a coffee Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: No Supports: No Resolution: 0,2mm Infill: 100% Filament: Bavaria-Filaments PLA Category: Decor

"Dreamscape Camp" - Coasters

_____________________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models - future and past , become an Authorized Merchant member…

shoe version of the big red boots from mschf

all i did was cut the collar and shorten the the neck

Amscope Microscope VESA Monitor Clamp

This VESA mount holds a lightweight 11" monitor onto the microscope rather than taking up valuable desk space. The 3D printed collar slips over the microscope's vertical pipe. An alternate solution is a VESA pipe clamp but these tend to…

Haken für Dometic Stromschiene

Hook for Dometic power rail to hang up a string of lights, for example

Adapter für Festool CT22e mit D36 auf 37mm Vakuumschlauch und 37mm Vakuumschlauch auf 56mm Aufnahme am Zyklonabscheider / Connector for Festool CT22e with D36 to 37mm suction hose and 37mm suction hose to 56mm mount on cyclone separator

Um gegenüber meinem anderen Aufbau einen der beiden Festool Staubsaugerschläuche zu sparen und den Saugweg zu verkürzen habe ich die beiden folgenden 90° Adapter entworfen. Funktionieren super und mit folgenden Druckereinstellunden auch…

Cable Guide for Amscope Microscope

Wiring for LED lights and triscope camera is tricky to manage on the Amscope microscope. I tried gaffer tape and velcro but was never satisfied with the result. This is a pair of cable guides to stop the cables getting caught in the…

Raumschif aus ,,The Hitchhikers guide to the Galaxy"

Raumschiff

AmScope Microscope Ring LED Polarizer + other parts

The included STL files are some accessories for an AmScope microscope; 1) replacement lens caps, 2) a replacement LED Ring mounting bracket, and 3) parts for adding a polarizer to the Ring Light. Replacement Lens Caps The Lens Caps STLs…

Futuristisches Raumschiff-Modell /Futuristic spaceship model

.

Commscope/Arris/NBN Touchstone CM8200 cable modem IKEA Skadis pegboard bracket

This model is a bracket to mount a Commscope (formerly Arris) Touchstone CM8200 Cable Modem to an IKEA Skadis pegboard system. This modem is commonly used by the Australian National Broadband Network (NBN) for Hybrid Fibre Coaxial (HFC)…

The Mini DoomScroller, a portable smartphone tripod (parametric)

Moved to GitHub 2024-01-10: All future updates will come through GitHub: https://github.com/jon-le0234/DoomScroller The work started growing too fast to manage two projects each on Thingiverse and Printables, so moved everything into one…

Raumschiff-Modell - Spaceship Model

,

Standfuß für SOL Raumschiff von Perry Rhodan

Dies ist ein einfacher Standfuß für Raumschiff SOL aus Perry Rhodan. Das Modell ist von Revell und hat die Nummer 04851. Als Schrauben habe ich M3 x 40 mm verwendet. Es ist ein bisschen tricky die Länge der Schrauben richtig einzustellen,…

Kevin Christmas Ornament Christbaumschmuck

Kevin Ornament als Weihnachtsbaumschmuck. Die Schrift ist die Star Wars Jedi Schrift von DaFont. Ca. 10cm hoch. No supports needed/keine Supports nötig.

Shipping Container MSC

This compact and practical storage box is perfect for organizing small items such as electronic components, screws, nuts, bolts, or desk accessories. The design is optimized for easy printing with no supports required and walls thick…

Klemmschelle EN 25 / Cable Clamp

flach, auf der größten Fläche drucken, Support ist optional 0.20mm SPEED ist ausreichend stabil Material nach Belieben, für den Außeneinsatz ggf. ABS verwenden

my summer car _msc

org scale is 2540% infil 20% layer hight 0.16mm

TTm 1000mmSchmalspur-Gepäckwagen 905-152 (NWE 155) M 1:120

Erbaut 1898 von Herbrand für die Nordhausen-Wernigeroder Eisenbahn (NWE) erhielt der Wagen die Nummer 155. Der Gepäckwagen ist heute in schlechtem Zustand, aber er existiert noch. Nach 1958 erhielt er die Nummer 905-152. Er war bis Ende…

Futuristisches Raumschiff-Modell - Futuristic spaceship model

.

Stern Weihnachtsbaumschmuck - Star Christmastreeornament

Stern als Weihnachtsbaumschmuck - Star as a Christmastreeornament

Starship / Raumschiff

Ein einfaches Raumschiff, A simple starship.

Sci-Fi Brücke Raumschiff / Sci-Fi Bridge spaceship

.

H0 Hemmschuh – Clip-Version

Für den Rangierbetrieb während einer Ausstellung mit Juniormodulen ( les modules junior ) wurden auf den Bahnhöfen Hemmschuhe benötigt, die abgestellte Wagen gegen Wegrollen sichern. Der Entwurf der Hemmschuhe ist an das verwendete…

MSC - Mobile Solar Case

Simple parts to build up a solar case based on 2 solar panels. I used 2 x 100w solar panels in black (looks sexy) from Münchensolar 980mm x 540mm x 35mm. The total weight of this version is nearly 12kg. I use it in my Camper to get more…

Plissee Holder Glue Plate / Plissee Klemmschuh Klebeplatte

This is an adapter for glueing plisse clamps to the windowframe. Use an M3 Nut with an M3x8 bolt and washer to screw the clamp to the adapter. I used 3M VHB Tape to stick it to the windowframe and cleaned the area with isopropyl…

Chrisbaumschmuck 1

Das Modell ist als Deko für den Weihnachtsbaum (Christbaum) gedacht. Die grösse ist 40x55 mm damit ist er leicht genug um auf Dauer am Baum zu hängen selbst wenn er schon etwas in die Tage gekommen ist . An ein Loch zum Aufhängen hab ich…

RMSC & Co Slide Cover for Kel-Tec P17

(VSMK0 "Classic" w/ VSMK0 Front Sight pictured) No Artificial Intelligence was used in the creation of these files. Releasing as public domain, no branding on parts. Accreditation appreciated. The RMSC & Co (-Witness) Slide Cover concept…

Bracket for power strip - Befestigung / Halterung für Stromschiene Steckerleiste T13 Steckdosenleiste

https://www.hornbach.ch/de/p/steckdosenleiste-power-easy-6xt13-1-5-m-einzelgeschaltet/5520578/ CAD Model…

Christmas Tree Ornament SNOWMAN 90mm (Weihnachtsbaumschmuck)

This 90mm tall christmas tree ornament SNOWMAN is a cute little funny guy with orange nose. Very easy to scale & print. Slicing: It is very simple. Just make a color change under his hat so that the broom gets black, too. We recommend to…

Eintracht Frankfurt Weihnachtskugel Baumschmuck

Um auch meinen Teil zum Weihnachtsschmuck beizutragen, habe ich vom Adler Wappen eine Skizze erzeugt und diese mit einer Weihnachtskugel kombiniert. Entstanden ist dadurch eine Weihnachtskugel für alle Fans der SGE Die Kugel wird aus 2…

Faux Optic / Red Dot RMSc

Simple Faux Red Dot. Approx size and shape of a Viper Red Dot. Common RMSc footprint. Mocked this up and printed for when I moved the real thing to a better pistol and I didn't have a filler plate. If you have tightly cut slide, you might…

AmScope ME580 Microscope Rotating Stage Inserts

I recently got an Amscope ME580 ‘metallurgical’ microscope. I'm an electrical engineer/RFIC designer and my main use of [this] microscope is to take photos of and analyze integrated circuits… Unlike biological/metallurgical samples,…

Industrielles Steampunk-Raumschiff-Modell/Industrial Steampunk spacecraft model

.

Normschlund / Small parts Test Tube/Fixture

The model presented here is a test tube with a tilted bottom that is supposed to represent a small childrens mouth. Things that can fit into the tube and do not protude the opening shall be considered a choking hazard according to the…

Christmas tree ornament hanger | Schmuck Aufhänger Christbaumschmuck

This hook is designed for hanging Christmas tree decorations . You can certainly hang up other things with it too :) Very easy to print and super quick to make. Available in 2 different thicknesses (1.8 mm && 3 mm) and a total size of 27…

Modular Mounting System for CR6 (MMSCR6)

I'm to share my latest idea for a modular hot end and extruder mounting systerm for the Creality CR6 style printers. This design is all about giving options and flexibility for mounting hot end and extruder combinations. With a modular…

Hook for SLV single-phase track / Haken für SLV 1-Phasen-Stromschienen

Twistlock hook to hang stuff on your SLV single-phase track. To mount: Just insert hook a little bit into track and twist to lock it in place. No supports required.

Dreamscape Organizer

Organizer for Kickstarter version of Dreamscape with all 4 expansions. Expansion trays are all done and I'll get the other stuff up once it's finished. Most of the pictures of the top layer are old. I removed the separate tree tray and…

Hue Dimmschalter V1 Batteryfach Reparatur/Hue dimmer switch V1 - battery case repair

During replacing of the batteries of the hue dimmer switch V1 the very weak strip of the main housing was brocken. Because of that, the battery cover does not mount anymore in the right way. With this part the problem is solved. Während…

Briefumschlag Weihnachtsclip

Briefumschlag Weihnachtsclip Gedreht auf die Druckplatte für ein schöneres Finish.

Luke Christmas Ornament Christbaumschmuck

Luke Ornament als Weihnachtsbaumschmuck. Die Schrift ist die Star Wars Jedi Schrift von DaFont. Ca. 10cm hoch. No supports needed/keine Supports nötig.

MSC Cargo Ship

Need support and raft

Automated 35mm Filmscanner Concept

Automatically scan your 35mm film with this device. This is just a concept, the real thing is coming soon. Required are besides the prints also 6x M3 nuts and screws.

MS Möve - Konstanzer Rammschiff

Die Möve, 1877 als Lastensegler gebaut und später zum Arbeitsschiff umgenutzt, war auf dem gesamten Bodensee als Rammschiff im Einsatz. 2005 trat der Stahlkoloss seinen wohlverdienten Ruhestand an. Seither nagt der Zahn der Zeit an diesem…

Wasserhahn umschalthilfe

Dieser Stecker hilft ihnen dabei, in der Badewanne dauerhaft die Duschbrause zu benutzen, auch bei niedrigem Wasserdruck.

Amscope WF10X Cell Phone Adapter - Microscope Cam for Google Pixel 7

This design couples an Amscope WF10X eyepiece with a plate to support and align your cell phone (Google Pixel 7 in this design).

Magnetic lens mount for AmScope / Eakins stereo microscopes

This system allows a quick switch between 0.5x/1x/2x lenses for AmScope or Eakins stereo microscopes. Slightly twist the lens to unmount it from the microscope. Note that the lens is positioned lower with this system on, so that some…

boots Vans MSCHF || кросовки Vans MSCHF

🥲

Besäumschuhhalterung Kreissäge/ Trimming shoe holder circular saw

Diese Besäumschuhhalterung haben wir für die FELDER KF 700P Kreissäge in unserem Makerspace erstellt. Das Modell besteht aus 2 Teilen, dass einfach zusammengesteckt werden kann und bei uns am Kabelkanal fixiert wurde.…

Amscope / Eakins Microscope VESA/monitor Mount with LCD mount via Camera Cold Shoe adapter

Remix of this model https://www.printables.com/model/803413-amscope-eakins-microscope-vesamonitor-mount adding a camera cold shoe adapter on the top to be able to mount LCD screen.

Everscroll the Print in Place Doomscrolling Fidget

Everscroll: The Doomscroll Fidget For those who just can't stop scrolling… Now you don't have to! Keep your fingers busy and your mind relaxed with the Everscroll – a 3D-print-in-place bearing designed for maximum fidgeting fun. ✨ What…

Detailreiche futuristisches Raumschiff

.

Garmin MSC10 Mounting Adapter

This is a mounting base to allow an MSC10 Garmin Satellite antenna to mount where a prior Garmin GPS24XD was located. The three holes are similarly spaced, but this allows adjustment if the hole orientation on the boat isn't appropriate…

chrisbaumi - Christmas tree ornaments / Weihnachtsbaumschmuck

A chrisbaum for your christmas tree ;-) The chrisbaumi is the little brother of the chrisbaum. It can be hung in the Christmas tree. Before you should use it as Christmas tree decorations, please decorate it first. The candles from the…

Weihnachtsbaumschmuck - Christmas Ornament

0,2 mm Schichtdicke keine Stützen erforderlich Ich habe die Glocke mit PLA in mattem Hellbraun gedruckt, wodurch sie aussieht, als wäre sie aus Holz gearbeitet. Die Datei „Körper_Rahmen” muss insgesamt sechsmal gedruckt werden. Sie ist…

Automated 35mm Filmscanner Arduino

Automatically scan your 35mm film with this device. Controlled by an Arduino.

Winery Tray Remix of MScottie Vinhos Deluxe Insert

The wooden winery pieces that came with my deluxe edition were a bit wider and taller than the original insert supported. I created a version that supports winery components up to 15mm in width at the base and 19mm in height. I also…

AmScope 42mm adapter

From factory my scope came with a 29mm to 38 mm adapter. I didn't find any 29mm to 42mm adapter so I made one.

Punch down stand for CommScope M-Series jacks

Place the CommScope M-Series jack in this stand to help save the wall or your knee from the pressure of the punch-down tool. Unlike the more common CAT5/6 jacks the M-Series jacks have snaps on the side and require special face-plates.

Schnellverschluss Namensschild Atemschutzgeräteträger (AGT)

für ein schnelles und komfortables abnehmen des Namensschildes im Einsatz - Auch mit Handschuhen

M6 Thumscrew Smooth

Print 100% infil with 0.2 layer height Glue in cap with epoxy

AmScope Eyepiece Cover

Nothing special, just print in PLA or your favorite material of chose.