Liczymy pasujące modele…
This replacement corner restores fit and function to your BAKFlip MX4 tonneau cover, ensuring secure alignment and durability. Instructions use original or any other screw to mount corner like previously. Category: Replacement Parts
Wydruk około 1,05 €–1,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I posted these before on thingyverse, but I dont like that site, just too slow, so as I am moving to this, thought I would share the design here too.
After taking the step of buying matching white label spice bottles I was faced with making a decision as to how I'd store them. Storing them in the box they came in helped kick the can down the road long enough for me to become incredibly…
Wanted a more elegant solution to holding podium mics in a "Presidential Mic" setup than gaff tape. This little clip was born. Optimally it would be printed in black. Push the flexible part of the neck into the opening on either side then…
I needed to mount two 49" Samsung curved displays on a pole-style mount. https://www.amazon.com/dp/B0881Y63MX?psc=1&ref=ppx_yo2ov_dt_b_product_details The Samsung hole pattern is 75x75 horizontally, which will work, but the vertical is…
Securely position your Logitech G560 speakers on your racing sim rig. Each shelf cradles the shape of the speaker and locates with recessed slots for the respective rubber feet. The STL provided is for the RIGHT shelf. Simply mirror the…
BAKFlip MX4 Truck Topper Replacement Corners. Tested in both TPU and ABS. Settled on ABS. See orientation to minimize supports. I set to minimum 5 perimeters and 50% infill. Brim required. The Front Corners are a different design than the…
This doesn't need supports, it leaves lots of room for airflow throughout the bottom, and provides 6 mounting holes for flexible options. Pick any two. The base is oversized enough that this isn't a tight fit, and the cables can exit…
Print the clip on its side with supports to the build plate. Use PETG for heat resistance.
These are basic wall mounts for the linksys MX4200. Print Settings Printer Brand: Creality Printer: K1 Supports: No Resolution: 0.2 Infill: 10% Filament: Creality PETg White Category: Organization
simple mount to attach the starlink mini to a 40mmx40mmx crossbar for a roof rack additional adapter for when parked you can adjust the alignment of the starlink. Thumb knobs for m6 allen bolt hardware. Item has been updated check it out…
Simple model made in tinkercad, can be resized with some trail and error. Made so i can play some 9th age with me bois after 40k got too anoying. I printed it with some crappy PLA and 0,3mm layer hight, wouldn't invest any more in it.
My tripod makes use of a QB-4W adapter which requires all 4 sides to be sloped, not just two. I loaded the original STL into tinkercad, performed a couple boolean operations to get the same slope, and preserved my dimentions on X and Y.…
I designed this model years ago when I worked for PSAV/Encore (If you know, you know) and now re-vamped it with no logo for the masses to use. Check out the original model on Thingiverse: https://www.thingiverse.com/thing:3293672 Simply…
For making a saw horse from 24x48mm boards. I included a small tolerance test file to print out and make sure the scale will work with your boards.
use a minimum of 50% INFILL 3 walls and use supports.. use a 5/8x1" bolt for knob replacement
Attach a gopro mount to the ImpulseRC apex using the tripod mount.
Adapter to mount readily available DR-Z license plate holder to Talaria Sting MX4. Use #10 1 inch metal screws to affix to frame, M6 bolts to affix license plate holder to adapter.
A remix of a great file, but adjusted to be for smaller 5mmx4mm magnet. Remixed by removing the portion 0.8-1.8, effectively making the entire file 1mm shorter. Thread etc lines up, so no “important” part was lost.
Mixer mit M6 Gewinde 55mmx40mm Die Flüssigkeit wird beim Mixen nach unten gezogen so das weniger Spritzer entstehen. ------------------ Mixer with M6 thread 55mmx40mm The liquid is pulled down during mixing, resulting in fewer…
Mount this tail light to your MX4 https://a.co/d/5am4sAG
40mmx40mm Shelf Bracket/Mount to keep up a shelf 5mm holes for screws Print with more walls for strength 2x Versions 3 and 4 Holes Best Printing orientation can be seen in the photos. Print with Brim for stability
This is a replacement piece for the plastic cover around the cable that you pull to unlatch the next section of the Bakflip MX4 tonneau cover. This particular model is a 2019 version for the RAM 1500 but I imagine it would work for other…
Just a circular saw edge guide. I made it as long as I could. So, cut it to fit your printer. It'll fit any 350mm² bed.
Customized version of http://www.thingiverse.com/thing:193647 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=193647 Instructions Using the following options: thickness = 2 drive_type = socket resolution =…
Customized version of http://www.thingiverse.com/thing:193647 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=193647 Instructions Using the following options: thickness = 2 drive_type = socket resolution…
Verlängert die Lebensdauer der Holzpfosten Infill: 20 % genügt Material: PLA
NOTE: This design was made before I got much better at designing for rack mounted components. As such, it's a bit… quirky. I'm leaving it here AS-IS. Need a eDMX Pro on a budget? 3D print your own enclosure and convert a eDMX4 Pro Din.…
Print in PETG for best results.
Made this simple stand for the Berhinger micromixer. Screws into my synthstation. Printed at only 2mm to be able to use the original screws, a bit wobbly side to side but works great. 45' tilt. Just mirrored the part in my slicer to get…
230119 1/2" Bracket for Plywood mount 3 mmx45 degr hole (1/2"=12mm) /膠合板支架/पलईवड मउट क लए बरकट When mounting several things I designed and printed a simple s-shaped bracket for clamping a plywood sheet in order to be able to shift it…
Unistrut hurts when you walk into it, in high traffic area a wider end-cap makes sense. Often unistrut is not perfectly cut/de-burred, so in this design that part that goes into the channel is tapered. Recommend printing in TPU with a…
I needed an adapter to attach my Solar Panel to my balcony bar, so designed adapter that would screw using the 2 holes at the base of the solar panel. I've did 2 versions, one with no incline and the other with 10Degree, this fit…
Modificación de la caja para USIfAC II de Vokgear para usarla en una expansión MX4
Scaled up wall mount
Remix of existing kayoumini canopy to accommodate cameras of a similar size with a 10mm lens like that which comes with the Emax Wyvern 100mw OpenIPC air unit.
This is to connect 4 inch dust hose to shop-vac hose 40 mm refurbishes This connect to Bosh sander 6 inch. See picture for the way i print it. made in PETG
Pannelli forati per sospensione utensili da lavoro. Composizione da 85cmx48cm. @pannelli da 20cmx20cm @pannelli da 20cmx8cm @pannelli da 20cmx5cm @più staffette per l'assemblaggio a muro e tra i vari pannelli. I fori dove mettere i ganci…
Printed in PLA, without support fits a 300x300 printbed Parts needed: dustfilter Material (I used “organza”) double sided tape or other method of adhesion magnet tape (I ripped it off the old dustfilter) since the bottom dustfilter is not…
i have creat this top cover fan for 40mmx40mm fan
This is an adapter ring that fits the included desk mount of the shure MX418C. Our previous speaker mic had a way bigger desk mount, so when we upgraded to the Shure MX418C the included desk mount did not fit. Since i want to keep the…
First make gets a coffee!!! For your Invision MX450 Monitor Arm Raiser — aimed at users looking to improve monitor arm stability or height with a clean 3D printed part. 🖥 Invision MX450 Monitor Arm Raiser – Stability & Clearance Upgrade…
Corner mount for Linksys MX4300. Can fit Legrand media cabinets.
We needed a rugged mount for the Shure MX400 conference microphone to attach to tabletop stands. Created this one with a gentle angle to raise capsule to about chin level.
Pannelli forati per sospensione utensili da lavoro. Composizione da 85cmx48cm. @pannelli da 20cmx20cm @pannelli da 20cmx8cm @pannelli da 20cmx5cm @più staffette per l'assemblaggio a muro e tra i vari pannelli. I fori dove mettere i ganci…
Just a circular saw edge guide. I made it as long as I could. So, cut it to fit your printer. It'll fit any 350mm² bed.
This is a replacement piece for the plastic cover around the cable that you pull to unlatch the next section of the Bakflip MX4 tonneau cover. This particular model is a 2019 version for the RAM 1500 but I imagine it would work for other…
I designed this model years ago when I worked for PSAV/Encore (If you know, you know) and now re-vamped it with no logo for the masses to use. Check out the original model on Thingiverse: https://www.thingiverse.com/thing:3293672 Simply…
