Wyniki wyszukiwania: nothing

Nothing/CMF watch 2 Pro charging dock/stand

Nothing/CMF watch 2 Pro charging dock/stand

Nothing Phone (3a Pro) Ring Protective Case

This mini protective case is specifically designed for the Nothing Phone (3a Pro) . It provides targeted protection for the camera module without compromising the phone’s unique design. Features: ✔ Discreet design or not that perfectly…

Just do nothing / Key chains V2

Here is a small decoration or a keychain Dimension : 90mm/46mm/3mm Dimensions keychains : 45mm/23mm/5mm The print files are with a color change, I advise you to slice it yourself.

Sensaphonics Adapter - Nothing Ear

Summary This is an adapter to designed to fit over the Nothing Ear speaker and slot into the filter space for a Sensaphonics ear plug. It's also small enough that you can keep the adapter on your Nothing Ear while charging your buds in…

Nothing Phone (1) Bumper Case

Hiya! This is a printable Bumper case for the Nothing Phone (1). I wanted a case for it but couldn't find any available at launch so I just made one ;) This is designed in a way that's a little on the thick side. But has cutout's for the…

Nothing Phone 3a Pro Case

Here’s a 3D-printable case I designed for the Nothing Phone 3a Pro. Made in FreeCAD, it’s based on BakeBakePi’s original model, but I tweaked it to be more PLA-friendly. I added cutouts for the Glyph interface, so the lights still shine…

Nothing Phone 1 case

Filament: TPU from FormFutura Infill not a concern, most of the volume is full by default. Support could be required for power and volume buttons space. Brim required to avoid warping.

Nods Or Nothing V1.2

Nods Or Nothing V1.2 by QwermMakes Nods Or Nothing is a replacement housing for the Nerf Modulus Day/Night Scope, a cheap IR digital camera. The original scope does not have very good mounting options and let’s face it, your poor ass…

Nothing Phone 2a Case

This time with cutouts to see the Glyphs

Nothing Phone (2) case

printed wirh 0.2mm layer height and no supports.

Nothing Phone (2) case

Best printed with 0.2, 0.15 works as well, 0.1 is a bit of a risk without supports for the side buttons. Printed with PLA. LEDs are still visible through the back if printed with non-transparent filament, thanks to a very thin layer. If…

Just a cute Nativity Scene, nothing fishy going on!

Have yourself a merry little Grinchmas ;) Try to hide this cute little piece of decor within your (or your wife's) ordinary Christmas decorations and watch how long it stays unnoticed. For best results print the model "face down" on a…

Nothing Ear (2) case

Description Simple case for Nothing Ear (2). It can completely protect overall from scratches. Print Settings Printer: Prusa i3 MK3S+ Rafts: Doesn't Matter Supports: No Infill: 20 Filament: Pxmalion Flexible TPU

Nothing CMF Phone Replacement Thumb Screw

Have you lost your thumbscrew from your CMF phone? Need a longer thread for a panel / case? This model is 2 parts, and requires a bolt and some superglue. Bolt required: M2.5 x 5mm CSK - For standard replacement M2.5 x 6mm CSK - for use…

Trammel of Archimedes (nothing grinder)

Mathematical toy mechanism: https://en.wikipedia.org/wiki/Trammel_of_Archimedes Fully articulated model drafted in Onshape: https://cad.onshape.com/documents/d659bd7bc2d1aa257044b19d/w/c36c7990b68ed0b7e594a5ae/e/fd8c4be747739989452cc2a9…

CMF Phone 1 by nothing back replacement

this is essentially the back of the phone which you can replace the OEM case with

case for - nothing phone 3a (A059)

hello, this is the basic model of the case for this mobile phone, which copies its curves and protects not only the camera lens from scratches. Enjoy, made with love

Nothing Phone (2a) case - REMIX with design cutouts

Remix of @DrCox_1746174's Nothing Phone 2a Case. Added additional cutouts and indents to mimic the original design of the phone. Also added cutouts around the volume and power buttons for easier access. Printed in Glow in the Dark PLA.

Nothing Phone 3a Case

I created this model for a nothingphone 3a, as I have not seen anyy good .stl around and decided to share it with you guys. Let me know if there is something i can improve for you. I took all the measures myself of this phone, but in my…

Braids, Ink, and Nothing Else.

Crab who holds nothing

won't need any supports on this, should print fine. I also made some with a hole to fit a ball 11mm ball Bering to roll around. if you have a ball that's not 11mm you can always scale it to fit your needs. you will just probably need to…

Look the 3D preview ---> Nichts / 没有 /Nothing / Nič / Nic / Rien

Deutsch: Eine elegante 3D-gedruckte Box, verziert mit der inspirierenden Inschrift "Wie du es dir gewünscht hast." Der Deckel ist drehbar und ermöglicht ein problemloses Einlegen von Bargeld oder Gutscheinen. Perfekt für besondere Anlässe…

Nothing Ear A case

Just a simple case for the nothing ear a ear buds in the voronoi style

Nothing ear (a) protective case

No support needed, with 95A tpu (15% infill, 0.38line width for top cace) Some clear VHB tape is recommended (at the corner of the case), similar for the bottom one.

Do Nothing Grinder/Trammel of Archimedes Fidget

Turn the crank and the glides move back and forth in their channels, never colliding, but also doing nothing. This fidget is based on the Trammel of Archimedes , which is a mechanism that traces the shape of an ellipse (which can easily…

nothing phone 1

modelo a escala de el smartphone nothing phone1 Category: Mobile Phone

Nothing Phone 2a BumperCase

Printed with 0.2 LH no Supports

Do nothing machine

Do nothing machine. Enjoy:)

Nothing Phone 2a case (remix) with step and FreeCAD file

I printed it with AzureFilm TPU 85A 0.2 layer height 0.4 nozzle Added some modifiers to the bottom of the case in slicer so the honeycomb infill is visible

Nothing Ear (a) - Reference Model

This is a reference model that I made in an hour for the Nothing Ear (a) case. It is not perfectly accurate, as I don't have the tools for that. I only have a dial caliper that reads imperial on the dial and my phone camera. I hope it…

nothing phone 3a pro

this is the nothing phone 3a

CMF by Nothing Watch Pro 2 Charging Puck

Just clip your magnetic CMF watch charger to get going.

Nothing phone 2 case

settings: 20 infill no suports 0.4mm nossel PLA

Do Nothing Fidgit

Print Settings Printer brand: Bambulabs Printer: Bambu P1P Rafts: No Supports: No Infill: 15

Nothing Phone (2) 3D Model

Nothing Phone (2) 3D Model created with Fusion 360 from dimensions, images and GSMArena's 3D Phone viewer Category: Models

Nothing Ear (case)

I was looking for a case for my Nothing Ear charging box — I’m not a fan of the transparent polycarbonate, which shows fingerprints and makes me hesitant to throw it in a pocket with keys. Out of all the options I found, I really liked…

CMF Nothing buds case

Doesn't need any glue, you can slide it on/off pretty easily, but it won't fall off on it's own. Bottom case also has small hole for the led light. File includes 2 versions of bottom half of the case with and without hole for charging.…

Nothing Phone 2A Case (Remix)

No supports, 0.2 resolution (on 0.4mm nozzle) printed with PLA. Print time +- 1 hour As the original creator stated, it's great if you need a quick case. Phone is holding very well in it. Be aware, 2A model has this center placed camera…

MY LIFE IS NOTHING BUT A SERIES OF UNDOCUMENTED OSHA VIOLATIONS, sign

Sign

CMF Nothing Phone 1 Horizontal Stand

A portable horizontal stand that can easily attach to the back of the CMF Nothing Phone 1. Has holes for large screw as well as smaller screw for stability. The bracket should be printed in a rigid, durable material, but the legs should…

Nothing. The perfect present... ;-)

I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … “What do you want for your birthday?” “Nothing, absolutely…

Nothing Phone One Case Hexagon

Hexagon Pattern Nothing Phone Case. With oversized holes for buttons and charging port.

Nothing Phone 3a Case

There isn't really anything available for this phone so I prepared a simple case. Can be printed in hard or flexible material. Optional: Hole in the back to be able to attach a pop out finger holder (need to disassemble them to squeeze…

Nothing Phone (2a) 3D Model

Nothing Phone (2a) 3D Model created with Fusion 360 from dimensions, images and GSMArena's 3D Phone viewer Category: Models

nothing ear 1 cover

cover for nothing ear

nothing phone 3a

3d model of the nothing phone 3a

Nothing box | xmas gift | birthday | nichts box | case

This is a small case/box with the text “nothing” or “nichts” on it. It is meant to care a gift card or money or such for a small present while usually gifting “nothing” :) Simple print, no supports etc. needed, 2 beautiful sides (both…

Case for Nothing Phone (3a) Pro

A case I designed and printed to fit the Nothing Phone (3a) Pro. It's designed without any raised edge around the camera bump in order to print flat on the printing bed. Printed and tested in transparent PETG with a tight tolerance.

NOTHING EAR Case Case

EDIT: TPU Version hinzugefügt. Diese Version unterscheidet sich leicht in den Geometrien und Abmessungen! Ein einfacher Schutz für das Nothing Ear Case. Eigentlich wollte ich ihn aus TPU machen, aber mir ging das aus, daher ist die erste…

Phone Case for the cmf 1 by Nothing

I couldn't find a suitable case for my new cmf 1 phone. So I designed one and got to try out some TPU printing on my Voron 2.4. I printed 8 cases before settling on this version. It took a few tries to get good TPU settings and thickness…

Nothing Phone 3a Pro Case for Quadlock

This is a custom-designed case for the Nothing Phone 3a Pro, fully compatible with the QuadLock mounting system. The case ensures a snug and secure fit while allowing you to easily attach your phone to any QuadLock-compatible mount –…

Nothing Ear 3 case

I didn't want my new Ear 3s case to become as scratched up as my old Ear 2s so I searched around but didn't find any model I fully liked or that was adjusted for the ear 3s supermic-button. So I... ...adjusted Endux Designs model (which…

See Nothing, Hear Nothing, Yell Everything

FR 🇫🇷 : Voici les trois singes de la sagesse… version mise à jour. Le premier ne voit rien. Le deuxième n’entend rien. Et le troisième… n’a rien compris, mais il va quand même t’expliquer pourquoi il a raison. Très fort. Très, très fort.…

Nothing Ear (a) case with a loop

A case for the Nothing Ear (a) wireless earbuds with a loop to put them, for example, on a retractable key holder! Edit: 12/25/24 - Version 2 -Modified the case to have a thicker loop, (the previous would break after a few weeks of use)…

3.5″ HDD Enclosure – storage case for drive replacement. Nothing special, but when needed ready to print.

HDD enclosure, modular case for storing 3.5" drives.HDD enclosure, modular case for storing 3.5" drives. Not a milestone in 3D print design, but definitely a useful companion — and ready to print if needed. It’s not really something you’d…

Something or Nothing 3D Text

3D text that when viewed from one angle says “Something” and viewed from another says “Nothing”. Some supports are needed, and it's fiddly to remove them, but with a little patience it comes out reasonable well.

Wireless charging station for Nothing Phone (1) and Samsung Galaxy Watch 5 Pro with IKEA Livboj

Required equipment: IKEA Livboj charger USB-C charghing cable Samsung Galaxy Watch 5 wireless charger Superglue The base station and the watch charging arm can be glued together. The base station does need support, while the arm can be…

CMF Buds Pro 2 by Nothing Holder

I like to carry my Buds Pro 2 on my belt or sometimes I like to hook it to my back pack. I've made two different models with each of these uses: one for your pants to hook onto, and one that you can add a keyring to to hook it onto your…

Nothing phone hardcase with quad lock attachment

I used Purefil tranpsarent green PETG for this print: 255°C, 70°C bed temp. 0.16 layer height. retraction length 5mm at 35mm/sec, movement speed 120mm/sec. infill at 80 percent, used gyroid infill for overall strength. some post cleanup…

Nothing Ear (a) Case

A good looking protective case for the Nothing ear a, fully functional letting you charge the case even if opened. I printed it in PLA and ABS and works very well, TPU is ideal

Nothing Ear (2) case protection TPU

Fits perfectly. Use TPU FLEXIBLE filament.

Nothing ear (a) case

Cover case tightly fitting the nothing ear (a) case. It allows you to embed a custom name by embossing the bottom. weighting less than 5 grams, it allows you to customize the color and provide extra protection around the original case…

Neo Stiffy Toolhead Gen2 (Powerful but costs almost nothing)

This is a powerful yet inexpensive toolhead for the Ender-3 NEO series, featuring two 5015 fans for superior cooling. The previous version of this toolhead can be found here:…

Neandertaler ,nichts hören , nichts sehen , nichts sagen - hear nothing, see nothing, say nothing

.

Nothing Phone 2 TPU case

I liked the design of the original design but I prefer TPU for phone cases for the cushioning. Printed in eSun TPU with 0.2 layer height, 4 walls and supports for the button/charger/speaker gaps. March 2025: Had uploaded a version I'd…

Do Nothing Machine - Print in Place

Do Nothing Machine complete print in place, Everything is captured. Add a few drops of light oil for sluggish action or squeak. negative holes are added as finger grabs to hold the model easier.

Gridfinity Nothing Ear A case holder

Got tired of searching for my headphones on my desk, could not find an Ear A stand or holder so I made my own. Using Torchy's Nothing Ear A reference model https://www.printables.com/model/940468-nothing-ear-a-reference-model and this…

Nothing Phone (2) Wall Mount

Print standing, without supports. Nozzle diameter: 0.4mm First layer height: 0.2mm Layer height: 0.15mm Seam position: Back Wall loops: 5 Bottom shell layers: 3 Top shell layers: 4 Sparse infill density: 20% Sparse infill pattern: Gyroid…

model - nothing phone 3a (A059)

Hello, I got my hands on this amazing phone and so I created a copy of it for you to create cases or other games or just for the exhibition. The model is a faithful copy in 1:1 scale. In my collection there are also other variations aimed…

Nothing Phone (2) Bumper Case

After using the original model for a while, I decided to make a diagonal back (between light lines) line for better grip. Printed with Transparent PETG.

Phoneholder for Nothing Phone 2 (with case on) for car

I printed this using AnkerMake M5 with their own PLA filament. I used 100% infill and 0.20mm layer height and supports. Print with large side on the print bed, file seems to be the wrong way by default. The thickness is 2mm everywhere…

Nothing Phone 2 TPU Case

I wanted an open back case in order to admire the phone, none of the silicone cases are good enough as the real thing so I made this. It was printed in Polymaker TPU at 0.28 layer height on an ender 6 + Bondtech DDX V3. The buttons are…

Nothing Phone 2a Case

For whatever reason you want such a case, but its way more beatiful without any. So go ahead and try my Bumper Case or buy a transparent one :)

Nothing Phone 2a 3D Case

Its a phone protective case made for nothing phone 2a with 3D elements in the back similar to what nothing phone has in

Nothing ear (a) - Cradle for Skadis

There are two different t-clips, if your cradle sits too loose on your skådis, try the clip for the painted pegboards.

4 in nothing cover accessories CMF phone 2

landscape or vertical stand; bottle opener; lanyard; card holder for max 5 cards. To assembly the CMF 4 in nothing cover accessories you'll need some new screws: 1 countersunk head M2x20mm screw + 1 nut for the rotational junction of the…

case cutter - nothing phone 3a (A059)

Hi, I created this case cutter to make it easy for each of us to create something unique for this phone. Keep an open mind

Do Nothing Machine

Print Models Take base and fit sliders inside Put slider on top Put in slider pins to connect the slider to the handle Put the handle pin in the handle Endlessly fidget!

Nothing Phone 1 Volley Case

Do you love volley and have a Nothing Phone 1? Nothing better than a volley-shaped case for your phone (or maybe your friend's phone)! Print No supports needed 100% infill PLA work great, 0.15 mm layer height If you want to commercialize…

Funny Sign - "Remember a RICH MAN is nothing but a POOR MAN with money"

Funny Sign - "Remember a RICH MAN is nothing but a POOR MAN with money", multi colour print, printed in ZIRO PLA Glitter Diamond Purple and Sunlu Matte white PLA. Complete with recesses for 10mm x 1mm magnets to make the sign easily…

Nothing Phone (1) - 40mm Bike Tube Mount

This is a bike mount for the Nothing Phone (1) to be mounted to 40mm bike tubes. There is some play so minor differences in tube size will also fit, but for square tubes or vastly different tube diameters the model would need to be…

Chudjak Bobblehead Figure: Nothing Ever Happens.

After some of my friends and I got drunk, we came up with a revolutionary idea. This is the Chudjak bobblehead. The ultimate form of stress relief for when the West has fallen. Billions must print. Nothing ever happens. Makes the perfect…

Nothing Ear (Stick) case

Simple case for Nothing Ear (stick). It can completely protect the sides from scratches. Print Settings Printer: Prusa i3 MK3S+ Rafts: Doesn't Matter Supports: No Infill: 20 Filament: Pxmalion Flexible TPU

Nothing Phone (1) Lens protector

This model is meant to simply press fit on to the protruding lens assembly of the nothing phone (1). Some light scraping of the inner diameters might be necessary for a good fit. If too loose a bit of thin double sided tape can also be…

WL charging dock for Nothing Phone 1

Dock to assist in placing the Nothing phone 1 on a wireless charging pad (Belkin wl charging pad 15W, model WIA002V2). Phone area is slightly over sized to accommodate a phone with a sleeve. Depending on your power-cable you might have to…

Skadis holder for CMF Buds Pro 2 by Nothing

I made place to put my CMF Buds Pro 2 on skadis board so stop putting them everywher. It's my first time using T-nuts by @6d6178 and trying to make something more complicated. If you have any ideas how to improve it let me know.

Nothing Phone 2 case

Printed from PLA with 0.2 layer height and no supports

Unemployed Spirit – The Zen of Doing Nothing

Meet the Unemployed Spirit . He has no job, no deadlines, and nowhere to be. He has mastered the ancient art of "Waiting to hear back." This high-detail model features a robed, hooded figure sitting in a lotus position. With no mouth or…

Gridfinity Nothing Ear(2)

Bin for storing your Nothing Ear(2) snug and nice in your desk drawer. Fits any orientation of the case(since it is a square, obviously) and thus can even be used as a charging dock.

Doing Nothing Sign - MMU

A sign about how to know when you are done doing nothing. Designed for MMU printing.

Nothing Ear 1 - Case replacement

lower part is replacement of original part so you will have to remove transparent part and replace it with nothingEar1_Low. also for better mounting i suggest using two 5x5x2(mm) magnets (in correct orientation) the top part is just a…

Nothing CMF accessory point to Vac-U-Lock adapter

Horizontal phoneholder for Nothing Phone 2 (with case on) for car

I printed this using AnkerMake M5 with their own PLA filament. I used 100% infill and 0.20mm layer height and supports. Print with large side on the print bed. The thickness is 2mm everywhere except in the spot for the magnet that is 1mm…

Nothing Phone 1 pikachu

Nothing Phone 1 pikachu

Skadis Nothing ear 2 mount

With this model you can store your in ears on your skadis pegboard. I really liked the T-Nut system created by 6d6178 therfore you need to print two of his M2.5 T-nuts to mount this. The mount was designed to store the case with some kind…

Just a cube, literally nothing special about it

Just a simple Blender cube, nothing special about it. Remember to like the model if you download it! :)

nothing phone 1 case with 17mm ball mount

Found that besides 1"balls 17mm balls are also widely used for mounting systems. This one is designed for the smaller 17mm mounting systems, the rest is exactly the same as the 1" version. Photo is from the 1"version but you get the idea…

Nothing

very abstract

Everything was beautiful and nothing hurt

This is a crude model of the gravestone from Slaughterhouse-Five. The model needs a little bit of clean-up, especially around the little angel guy, but otherwise it prints fairly well if you print it laying down on its back. So it goes.

Gravitrax with nothing on it

It fits to gravitrax