445 modeli
The Steel Ball should be rotating in your palm! In this model, this is achieved with a single 608 bearing located at its center. Note: if this seems like fun to you, you might also like the seasonal Easter Steel Egg . Printing The whole…
Wydruk około 6,00 €–7,33 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Add a some small Cylinders as Negative Volume for draining No Supports needed Scale it as you like :)
Wydruk około 14,92 €–18,23 € nettoWstępna wycena jednego wariantu
Simple Christmas cutter in the shape of a Satoru Gojo from the anime jujutsu kaisen. You can support me with Bitcoin or Lightning network HERE or normal payment HERE .
Wydruk około 0,87 €–1,06 € nettoWstępna wycena jednego wariantu
Just finished season two of JoJo's bizzare adventure. Loved Iggy, he is favourite mutt! So I made a sculpture of him you can print. :)
Wydruk około 4,12 €–5,04 € nettoWstępna wycena jednego wariantu
1st player token for Terraforming Mars board game Remix of Sojourner Probe Model by gryn: https://www.thingiverse.com/thing:2720390 Supports are not needed anymore Less parts, less glue, more print in place Undercarriage No.1 added Scaled…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
Credit to original creator: https://www.thingiverse.com/thing:5427331
Wydruk około 3,18 €–3,89 € nettoWstępna wycena jednego wariantu
Je to ochrana před úrazem elektrickým proudem při práci v rozvaděčích. Zabraňuje náhodnému dotyku propojovacího hřebenu ze strany.
Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
In the Barbie movie, Ken's Mojo Dojo Casa House appearance sports a horse emblazoned necklace with a horseshoe border. This model is a “Barbie” version of the necklace, with the Barbie “B” instead of Ken's horse obsession. This model…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu
This is a small cover that fits over a mic extension tube and Klark Teknik CT1 mic booster to create a wireless Shure SM7B. Without this part, the booster and extension tube aren't held securely in place which can cause damage or a loose…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
Gojo Satoru als purge line, sie müssen den gcode in ihren slicer kopieren M83 ; use relative distances for extrusion ; filament start gcode M106 S0 ;Z:0.2 ;BEFORE_LAYER_CHANGE G92 E0 ;0.2 G1 E-10 F3600 ;AFTER_LAYER_CHANGE ;0.2…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
🥚 Introduction How does Gyro celebrate Easter? By replacing his regular steel ball with a steel egg ! For printing, there are two options: The full rotating fidget (four printed parts plus bearing and weights) A plain egg , just for…
Wydruk około 8,55 €–10,45 € nettoWstępna wycena jednego wariantu
nah id win
Wydruk około 8,25 €–10,09 € nettoWstępna wycena jednego wariantu
Vymodeloval jsem to v Blendru, a úspěšně vytiskl.
Wydruk około 11,36 €–13,89 € nettoWstępna wycena jednego wariantu
Pet Shop : Falcon : JoJo's Bizarre Adventure
Wydruk około 5,92 €–7,23 € nettoWstępna wycena jednego wariantu
Iggy : JoJo's Bizarre Adventure
Wydruk około 4,24 €–5,18 € nettoWstępna wycena jednego wariantu
Tower of Gray : Jojo's Bizarre Adventure: Diamond Records
Wydruk około 5,42 €–6,62 € nettoWstępna wycena jednego wariantu
This model is of the steel ball weapon from the anime Jojo's Bizarre Adventure. A step version is included to facilitate modification. I had luck printing the halved version (print two copies as the halves are identical) at 0.1 mm layer…
This 3D printable model of Gojo Satoru from Jujutsu Kaisen and requires ZERO supports. ENJOY!
Okuyasu used Za Hando to remove most of Josuke's body! A meme of Josuke from part 4 of Jojo's Bizarre Adventures.
https://www.thingiverse.com/thing:5801017
Enjoy my work? Find my full collection over on Patreon or By Buying Me a Coffee This is my cute chibi style sculpt of Satoru Gojo from Jujutsu Kaisen. I'm still trying to figure out if I want to go and watch the new movie... This model…
This is the requiem arrow from Jojo's Bizarre Adventure Part 5: Golden Wind used by Giorno Giovanna
Print verticaly with raft and 100% infill.Use white PLA.
JJK Satoru Gojo Chibi keychain 2 color print.
This is Gojo Satoru's sunglasses. Made it because I couldn't find it on Printables or Thingiverse and too lazy to search more. Hopefully it prints well. 2 files, 1 with blocked fake lens and other without anything (empty circles). Has no…
Imprimir con cambio de color, se recomienda utilizar color blanco para el fondo, y en el cambio de color utilizar color negro para hacer el dibujo. Tamaño del llavero 4.5 x 4.5 cm
Alright look, I was really bored and my friend reminded me of this panel. If you want me to do more of these you can try commenting with your favorite panels, i kinda enjoyed the process tbh. This model was made to be printed supportless…
A action figure from the anime JJK- Satoru Gojo
Bring the strongest sorcerer to your desk! This Satoru Gojo bust captures the iconic Infinite' pose with high-fidelity detail in the hair and hand gestures. Optimized for clean printing and a perfect canvas for hand-painting hobbyists. 💙…
Satoru GOJO from the jujutsu kaisen anime
Materials: PLA, ABS, PETG Layer Height: 0.12–0.20 mm for FDM Nozzle Size: 0.4 mm (standard) Supports: Yes (tree supports recommended)
Print the Yoyo with 80% infill and the yoyo will weigh about 60grams. The screw and the 3mm middle-nut should be printed with 100% infill for strength. The nut should obviously be in the middle of the screw. The screw could break if you…
Hey id appreciate if you downloaded this model on my makerworld profile here: https://makerworld.com/en/models/1420929-bookmark-inspired-by-jjk-gojo#profileId-1476308 I recently made a OnePiece Bookmark for my brother's manga and he loved…
The charm floating around the Green Dolphin Street Prison, passed onto Jolyne when she is in trouble. If you are lucky, you might develop some bizarre powers. PART 6 Let's Go! Super excited to have this part animated! LocketTop x 1…
Saw the Killer Queen models but none of them was integrated with suports so i merged figurene and supports together
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 Swap…
This model widens one side of the spool ring adapter to stabilize a 3DHOJOR 1kg 199x62mm cardboard spool while it rotates within a Bambu Lab AMS. Features: Reusable 3DHOJOR nameplate for easy identification when reusing Instructions:…
Joseph Joestars steel clacker balls from JoJo's Bizarre Adventure part 2. There is both a full model version and a split. I printed at 35% infill.
Here we have Polnareffs Earrings witch I Modeled with Solidworks. There is the right and the matching left earring in the folders down below in different versions. You will find the .prt File for Solidworks and .step for other CAD…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Cobalt Blue At layer #9 (0.8mm) swap to Purple At layer #11 (0.96mm) swap to Gray At layer #12…
This model of the Sojourner Mars rover is ½ scale. The model can either use motors/stepper motors to drive the rover with a joystick or as a static model. To drive the motors an Arduino Uno is used to take inputs from the joystick and…
Print Settings: Material: PLA Silk Layer Height: 0.12mm Infill: 15% Supports: Tree Supports (Organic) Creation Process: This model was created using a hybrid workflow combining AI generation and manual 3D sculpting: AI Generation: The…
YoYo, do you need a present or entertain the kids? Print this YoYo with a batman motif, add a thin string and assemblies according to the instructions. You can use a drop of super glue for the connection. Jojo, potřebuješ rychle dárek…
Public domain Mars Sojourner Rover model by argonius . Originally uploaded to Blend Swap .
Steel Ball 1:1, J.Lo Zeppeli stand (JoJo Part 7 Steel Ball Run) Dimensions (mm) : 80 x 80 x 81 I used around 74 grams of filament Must use supports
Just a JoJo keychain Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.3 Filament: Prusament PLA Galaxy Purple
In the Barbie movie, Ken's Mojo Dojo Casa House appearance sports a horse emblazoned necklace with a horseshoe border. This model is an attempt to replicate the necklace. This model isn't 1:1 from the movie, but makes a pretty good prop!
ゴゴゴ… Printed and glued a magnet strip on the back of each. Printed these at different scales to get three of em. Kept the Z height the same to make filament swaps easier.
Can be printed and used as an ornament or turned into a keychain. Use any type of plastic that works for you.
Hello! Another anime panel here. This one is Gojo and Itadori from Jujutsu Kaisen (JJK). There's a slight filter over this one that I added that I wanted to try which made it almost look “staticky” which I think added to the flair. Print…
Jojo's "To Be Continued" Arrow redesigned as the one available I had issues slicing. Print Settings Printer: Hypercube Evolution Rafts: No Supports: No Resolution: 0.2 Infill: 35% Filament: 3DOn ABS Atlantis Blue Notes: May need a brim…
DUAL COLOR WITH PAUSE Slice and set a pause in the slicer (at 0.20 it will be layer 6 or 7) Start the print in white, when the printer stops change the filament to black
Krmítko do kterého se vlezou až 3 lojové koule o průměru 6 cm. Ptáčci tak budou mít co zobat, když je venku zasněženo. K dispozici jsou dvě varianty - s miskou pro zachytávání drobků a odtokovými dírkami a bez misky s bidýlkem. Krmítko má…
Satoru Gojo is a character from the manga and anime series Jujutsu Kaisen, known as "The Strongest Shaman." He is a Special Class sorcerer and the inheritor of one of the most powerful techniques, the power of the six eyes.
Výsledek tištěn s podporami, tisk cca 4,5 hodiny.
a colored head of Shinjuku Gojo
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Elegoo Black Transmission Distance: 1.8 PLA Elegoo White Transmission Distance: 9.4 Swap Instructions: Start with Black At layer #3…
Emperor Gun Jojo's Bizarre Adventure
This is my first Fusion 360 project to remix CrazyK's Rockpro64 RoninDojo case to fit Raspberry Pi 4. As I uses POE+ Hat with mine, it is made with fitting a POE+ Hat in mind. As I barely begun using Fusion 360 I lack the skill to make…
Altura recomendada: 150 mm Diseño Este modelo 3D está inspirado en el personaje Noelle del juego Genshin Impact, llevando un elegante vestido rojo que resalta su elegancia y fortaleza. Uso Ideal para fanáticos de Genshin Impact, este…
Yo imprimo con altura de capa 0.32 y relleno del 10%
suports :no infill: cups 15% lithophane 99% tips: If you found Difficult to remove support i recommend this settings: 0.25mm z distance 75% xy distance 3mm support spacing 4 interface layers 0,2mm interface layer spacing (Hope i help a…
Created using an image-to-3D tool and minor manual adjustments: I used https://makerworld.com/cs/makerlab as a image-to-3D tool for this IMPORTANT: Fan-made models for personal use only. All characters and original designs belong to their…
TinyMtn Free Pack 10 - Andes This is a package with sets of 3D model files for four notable mountains in the Andes. Aconcagua, 6962 m / 22,841 ft Volcán Chimborazo, 6267 m / 20,561 ft Nevado Huascarán, 6768 m / 22,205 ft Ojos del Salado,…
Credit to original creator: https://www.thingiverse.com/thing:5206053
Krmítko pro ptáky na lojové koule závěsné, nebo na tyč 20mm. Tisk bez podpěr.
Detailní 3D figurka inspirovaná světem Dungeons & Dragons, zobrazující těžce obrněného bojovníka připraveného do bitvy. Postava má masivní plátovou zbroj, velký štít a dvojici mečů, což podtrhuje její roli frontového tanku i zkušeného…
A 3D recreation of the Brooch Giorno wears in the Golden Wind season of JoJo's Bizarre Adventure. Multi-part/color support. A nametag magnet such as this one from amazon is a good way to use this on a cosplay or as a pin.
Today I saw how agsworkshop made a mod for the Montana Mask as the bane mask from the dark knight rises and loved the concept. Since I really Enjoy Jojos Bizarre Adveture (Specially Part 2) and i have already seen quite a few memes about…
Simple Satoru Gojo chibi with stand
Modelo inspirado en el cartucho del pokemon rojo
litofania de jotaro
Keycap with the arrow tip from JoJo's Bizarre adventure
The Gojo Dark Sorcerer Warrior is a striking 3D printable anime-style fantasy figure inspired by a powerful blindfolded sorcerer character. Featuring flowing shadow aura elements, layered robes, and a confident stance, this model creates…
Keychain modeled based on the symbol referring to the character Gojo Satoru from Jujutsu Kaisen . Made in Tinkercad, ready to print :D
A while back I modelled the details for Jotaro's cap from Jojo's Bizzare Adventure - Stardust Crusaders. The files include the band, two different sized buttons and hand detail. The band has been broken down into three pieces for printing…
The model from zapta works perfectly, but its so small that if its on a keychain you can't reach how far back the hole is. This simply adds a 90 degree angle so you can keep the key on your keychain and open the dispenser.
TOOLHEAD SHROUD UPDATE:: After some positive feedback I've altered a few things slightly with a view to more tolerance for everyone. updates include: 1.top of tool head cover made larger to fit alterations you may have made to cable feed.…
Keychain modeled based on the symbol referring to the character Gojo Satoru from Jujutsu Kaisen . Made in Tinkercad, ready to print :D
The case is made for the iPhone 12, so I'm not sure if it will fit for other generations. Placing the gojo_case will require some glue. Instructions are for both gojo_case and gojo STL: Print at 100% infill with a layer height of 0.08mm…
Enjoy my work? Find my full collection of work over on Patreon Or Show your support by buying me a coffee ! This model requires supports under the tail.
This is a picture of Satoru Gojo (Fanart), better known from Jujutsu Kaisen with his blindfold, created with Hueforge. This Hueforge requires 4 colours and was created with the following swap instructions: Start with Black At layer #8…
Case designed for the Rockpro64 board, can house up to 2 SSDs Designed by @MustyDuster & @Crazyk031 Modifications made by @mathiaspl20
Marco de silueta del personaje Gojo Saturo del anime Jujutsu Kaisen Puedes poner el color de la cartulina que quieras en la parte de atrás, yo elegí roja. Imprimir en el tamaño que quieras, yo lo escalé 700% y quedó de 15cm de alto con…
Toto je ruční odpojovač pro spřáhla Tillig (TT - 1:120) This is a manual disconnector for Tillig couplers (TT - 1:120) Tillig Kupplungstrenner (TT - 1:120)
its a badge with the menacing lettering
Animatronic Eye Mechanism – Academic Reference Model Este modelo presenta el mecanismo completo de ojos y párpados utilizado en la cabeza animatrónica del proyecto “Jack”. Incluye las esferas oculares, soportes estructurales, palancas,…
(if you want to be able to open your compatible GOJO dispenser without tools, take a look at thing 3290689) Lost the opening tool of your GOJO soap dispenser, no problem, print a few and keep one in every drawer or attach to your key…
Jojo's Bizarre Adventure I'm a huge fan of JoJo's Bizarre Adventure, and since Jotaro’s true form is his hat, I created a fanart version of it and shared it with everyone. The print file includes the original version( Long 48mm), a…
10/15/24 v2 Update Holes on top and bottom increases by .2mm (to 4.2mm and 8.2mm) The 4mm and 8mm holes were too snug, especially when removing the wing from the decoy. I broke a printed mount as it was a little snug when taking it of the…
