Shell for garage door remote CAME TOPD2R
Replacement case for CAME TOPD2R remote
- Pobrania
- 80
- Polubienia
- 8
- Ocena
- 4
Liczymy pasujące modele…
Replacement case for CAME TOPD2R remote
I turned an old dresser into a knife drawer, but it was too heavy and bulky and kept breaking, so I decided to make this instead. I made it out of PETG for a little better temperature tolerance though I don't think it's a problem. I got…
Om dat mijn vrouw zoveel broeksriemen heeft, maak ik er kapstok voor. Je kan het ook gebruiken voor stropdassen. groeten Ludo Because my wife has so many belts, I make a coat rack for it. You can also use it for ties. regards ludo
Om aan de kast deur te hangen. Om dat mijn vrouw zoveel broeksriemen heeft, maak ik er kapstok voor. Je kan het ook gebruiken voor stropdassen. groeten Ludo To hang on the closet door. Because my wife has so many belts, I make a coat rack…
The size of the bar that the dispenser hangs from has changed on newer pick carts from 75mm (2.9") to 87mm(3.4"). So if your store gets new carts you may need to download the remix by Crazy Asian that has been modified to account for…
This is my new project: a pusher boat, or a Dutch "opduwer" from 1927. "Opduwers" come in various shapes and sizes. https://nl.wikipedia.org/wiki/Opduwer The pusher is on a scale of 1:10 and is approximately 60cm long. The design isn't…
Topdon TC001 and TC002 thermal camera lens mount Rasperry pi, left: with macro lens 76.2mm, right: without (both images scaled and cropped to show the approx. the same excerpt. The closest distance where the image was as sharp as possible…
A dropdown longboard to fit your fingerboard trucks to. I built this to be the proportions of a 45" longboard deck with 75mm wheels, scaled down to fingerboard size. Standard bolt hole pattern. The wheels are provided in two files – one…
I have made some changes but kept mostly true to the original design. An associate called it the label dispenser 2.0 so that is what I'm calling it. It will use more filament than the original design. This took about 6 hours with a .8…
DO NOT POINT THIS AT THE SUN, IT WILL PERMANENTLY BLIND YOU! Summary This is a Newtonian telescope with a 114 mm diameter mirror and therefore a bit more light gathering and resolving power than the typical beginner 70 mm refractor…
We received new pick carts. They decided to change the distance of the hook for the labels. I slightly stretched the design to accommodate the new distance. I converted the original mesh to polymetric so I could edit it in Fusion 360. I…
Simple case for the TOPDON TC001 thermal camera. Slides in and sits very tight, you have to pull moderately to take out the camera, it's not possible to fall out. Print Settings Printer Brand: Anycubic Printer: i3 Mega S/Pro Rafts: No…
The POPDARTS Board Edition came with a small drawstring bag to hold the darts which I didn't like, and there was no way to attach the bag to the board carrying bag. So designed up my own dart holder that can be attached to the carrying…
PLA+ 0.2mm layer height Can be printed in one piece on a Bambu P1 - hinges in place. No supports required. 15% infill I've also included the ‘Bumpers’ - these should be printed in TPU with 10% infill. These will help secure the camera and…
I use a 20mm diameter lens with a focal length of 50.8mm. On the images you see an Arduino Nano with and without the macro lens.…
den Magnetring gibt es z.B. bei Aliexpress Das Gehäuse habe ich auf der Seite der Laschen etwas verstärkt, wie auch der innere Ring im Objektiv, da bei den gedruckten Modell diese Laschen abgebrochen sind. Für den USB-C Anschluss nehme…
Minimalistic slide-on cover for Topdon TC001/TC002 Thermal Camera Easy to print, easy to slide on. To get it of just sqeeze it on the small sides an pull.
Summary Holds up to 10s4p 18650 and charged through the magnetic Rosenberger LEV plug, therefore it works with 36v ebike chargers. Two parts to work with desktop printers, and has a lip to join the parts. Preferably glue them together for…
Shell for garage door remote CAME TOPD2R (Without inscription / With A hole)
Family sized car created specially for the 2024 Loyal Moses Christmas Community Print Drive. Design inspired by 1950's Aero style cars. Model printed in PLA Nozzle 0.4 Layer Height 0.2 Gyroid infill 15% 4 walls
Mount the holder using 3M double-sided tape. The press-fit connection is a bit loose, so you may want to add a small amount of super glue for extra stability. Print the model in the orientation provided in the file for best results.
An attempt to solve a niche water rocketry problem. Plan is to revise and expand this during June-September 2026. What is it? Motivation In water rocketry, sometimes you want to narrow the opening where water comes out to lengthen the…
Remix of transwarp2010's Hypercube Evolution Mini Stepdown Case. My soldering isn't great and didn't fit very well in the original box. So i extended it by 10mm
This is suppose to work with the foam insert that comes with the package. I made it because I wanted something more ridged and sturdy. If printed you can print the hinges from…
LSC Camera voet vierkant
Couldn't find any appropriate mounts for the Topdon TC-004 Mini Thermal Imaging camera to fit on Skadis boards, so designed my own. Printed with tree supports in PETG. Hopefully someone finds this useful :)
My printer is above my computer and the LCD was pointing in a direction that made it impossible for me to read while seated. These two LCD mounts replace the originals that came with my printer. They angle the LCD straight forward. They…
Topdeck Stiffener that repaces the original topdeck bridge if you cut it. Useful if you don't have many spares. Printed with PLA, 0.4mm nozzle, 0.2mm layer height and 100% infill.
A curly hanger to droop down from a high place. Made this for my mother so that she can hang a fancy butterfly wind chime in a tall window without it sitting too high up. Bottom of the curl (where you would hook something on) hangs out…
#TROTSopdeBOER groot formaat eventueel aan te passen in de slicer. #PROUDoftheFARMER can be resized.
This is the DoubleDropDown logo on a coaster! Keep your desk clean and our logo holding on to your beverage of choice!
A little keychain I designed for a dude on reddit.
A rugged box with cutouts to fit the Topdon Artilink 400 OBD computer. This will just about fit on a Mk4, but the box part warped quite a bit on my print, so even though it doesn't affect the functionality of the box if I was printing it…
Simple magnet to hold keys on a wall, has OPD engraved into it. Larger one was intended to be made if the smaller one didn't hold. Required Hardware: 2-4 12mmX2mm neodymium magnets
Toptown hook, it is a little wider to allow the double side tape to stick better (I cannot screw it in) There is also a screw hole if you want to use one
Simple gridfinity bin to hold the Topdon TC001 thermal camera in a dedicated bin, along with the included USB cable. You can probably fit the microfiber cloth in, or over the bin to protect the lens.
The new cart's label holder keeps falling out, this is a simple clip to prevent that from happening.
Fits sliding windows that have a slot in the side (~3mm) use this plastic dropdown stop to allow a secure partial opening of the window for venting. Photos show original (white) and replacement. Prints well as shown in model preview with…
OPD Cart Phone Mount Requires charging module. This can be modified in the backup* file to fit other modules, just change the charger offset and size to fit your module. This is made to fit most OPD cart's. It will charge the newer work…
Separator for the newest carts and their holder Newest one should hook around the entire front.
Simple bag holders for the carts. Got them numbered 1-8 with QR codes, allows you to scan the holder rather than to the tote. Allowing you to put your stickers anywhere and have a central location to scan. V2 was made much thicker and…
Just a simple upgrade to the current label system, allows the labels to be automatically come off the backing. Required Hardware: double sided tape, recommended 3M VHB tape, but any double sided tape should work.
Simple pins to hold down notebook pockets to the GMD carts. Do need to punch a hole in one side to sit correctly. Just clip in and good to go~~
A mount for OPD's printer. Square version goes into a .75 inch square hole, same that is both on the cabinet and the carts. (Old version an looks chunky.... I don't like it but it works lol) GMD cart version goes onto the thing that holds…
Simple holder for the trash on OPD Carts. Thin one: Installing inside is a bit looser, it is more conveinennt when putting them closer together. The angled slope will be worse for holding the bag in as well... Inside one: This is made to…
Protective box for Topdon TS004 thermal monocular. Use the foam from the original factory packaging to put in the bottom. Magnet holes fit 1.8 x 7.8mm magnet from harbor freight, used super glue to hold in place. I printed with 15% infill…
Make your board float on the wall with no drilling and no visible hardware. I couldn't find any good designs for hanging my longboards horizontally without nails and ease of picking up the board when you want to use it. These hangers clip…
Simple bag holders for the carts. Got them numbered 1-8 with QR codes, allows you to scan the holder rather than to the tote. Allowing you to put your stickers anywhere and have a central location to scan. The thickness of qr code and…
OPD Cart holder for generic wipes * ** . Got tired of always getting bad smell on my hands from picking.. Has a holder for the receipt or storeuse sticker. Wipes go into the holder Slots into the cart between the printer holder
Pin for aligning the upper gear of the OPDA on a 2005-2006 wrangler. Made it due to some replacements not including one.
Water bottle holder for the printer holder Also hold things like batteries!!!! If we don't have enough anyways, might as well use that space for something!!!!!
Picking Additions that make this tolerable. QR Tokens 1-8 Dead simple tokens that simply sit on the edge of the tray or on the top of cart. They sit neatly in between squares. If you have a vertical mount that allows distance between your…
Changes that I tried previously and wanted to either fix or remake cause boredom and wanted to. (Just wanted to try them in a new cad suite) Tape Separator Just a thin separator that hook around the front and keep the rolls from rolling…
PropDock is a modular propagation-station set for plant cuttings grown in glass tubes. The pack includes compact desktop and wall-mounted layouts plus reducer rings so one system can work with more than one common tube diameter. WHAT IS…
Couldn't find any appropriate mounts for the Topdon TC-004 Mini Thermal Imaging camera to fit on Skadis boards, so designed my own. Printed with tree supports in PETG. Hopefully someone finds this useful :)
Topdeck Stiffener that repaces the original topdeck bridge if you cut it. Useful if you don't have many spares. Printed with PLA, 0.4mm nozzle, 0.2mm layer height and 100% infill.
Mount the holder using 3M double-sided tape. The press-fit connection is a bit loose, so you may want to add a small amount of super glue for extra stability. Print the model in the orientation provided in the file for best results.
Just a simple upgrade to the current label system, allows the labels to be automatically come off the backing. Required Hardware: double sided tape, recommended 3M VHB tape, but any double sided tape should work.
The new cart's label holder keeps falling out, this is a simple clip to prevent that from happening.
Simple magnet to hold keys on a wall, has OPD engraved into it. Larger one was intended to be made if the smaller one didn't hold. Required Hardware: 2-4 12mmX2mm neodymium magnets
Simple pins to hold down notebook pockets to the GMD carts. Do need to punch a hole in one side to sit correctly. Just clip in and good to go~~
A mount for OPD's printer. Square version goes into a .75 inch square hole, same that is both on the cabinet and the carts. (Old version an looks chunky.... I don't like it but it works lol) GMD cart version goes onto the thing that holds…
Separator for the newest carts and their holder Newest one should hook around the entire front.
🎅 Support-Free Santa Claus 🎄 Get ready for some festive fun! This adorable Santa Claus is designed to print completely support-free — easy, clean, and jolly! 📦 What's Included: Full model STL file Multi-color 3MF file for effortless color…
Topdeck Stiffener that repaces the original topdeck bridge if you cut it. Useful if you don't have many spares. Printed with PLA, 0.4mm nozzle, 0.2mm layer height and 100% infill.
ENGLISH: All my automatic gate's remote controllers broke. CAME did a bad job with this models. I designed this protection cover to repair broken ones and save new ones. You need four M3x6mm screws and four M3 brass inserts. The TOPD2R…