3246 modeli
A tiny cute triceratops that uses just 5 grams of filament. Great as a cute decoration, keychain, or little desk dino. Print Settings : Layer height: 0.10 mm Infill: 15% Grid Supports: Yes Support type: organic Fuzzy Skin: Outside walls (…
Wydruk około 1,05 €–1,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
A collection of 23 snowflakes with hanging loops for decoration purposes, 7-9 centimeters big. The same snowflakes without hanging loops are here . More big designs ↑ Link: 26 Big Snowflakes collection Smaller, 5 cm, designs ↑ Link: 34…
Wydruk około 1,14 €–1,39 € nettoWstępna wycena jednego wariantu
I saw something like this at a restaurant and was able to make a similiar item for use at home. The print works well out of PLA filament and the fun colors are great for kids. Print time is about 8 minutes Of all the utensil holders I've…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Enjoy snacking while keeping your hands clean with the Snack Finger Chopsticks ! Perfect for gaming, working, or just enjoying your favorite snacks without the mess. These lightweight, ergonomic chopsticks allow you to grab chips,…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
Inspired by the design from FUN CHOP chopstick helpers. Great for rounded chop sticks as well. Recommend Print in PETG for flex and strength. Recommend 100% Infill FunChop chopstick Helpers (Amazon Link⬇) https://a.co/d/1i6oWUr
Wydruk około 0,20 €–0,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This system prevents the TS55 saw leaving the guide rail FS when cutting with the sloped blade. Even with a 45 degree angle the saw remains secure on the rail thanks to the 2 stops screwed on the sole of the saw Inspired and adapted from…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena jednego wariantu
A collection of 34 snowflakes with hanging loops for decoration purposes, with a silhouette design. The same snowflakes without hanging loops are here . More 5 cm designs ↑ Link: 34 Snowflake collection ↑ Link: 34 Snowflake collection ↑…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
Flexi Dino Triceratops Dimension de l'objet 154x72 mm Ep 12 mm
Wydruk około 4,22 €–5,15 € nettoWstępna wycena jednego wariantu
Sometimes simple is better. This is my attempt to make better Z-Axis Tops for the MK3/MK3S(+) printers on the stock frame. This is remixed/based off of Prusa's own latest R2 design of the Z-Axis Tops. Here's what's different: Fully opened…
Wydruk około 1,11 €–1,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Struggeling with chopstick? Put the chopsticks in de holder en go! nice and easy
Wydruk około 0,21 €–0,25 € nettoWstępna wycena jednego wariantu
Hold your chopsticks together until it's time to eat, then keep your table clean with this dual-purpose chopstick cuff holder and rest. Add a touch of elegance to a dinner party or just prevent losing your chopsticks during a meal on the…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
A remix from @M's blank keystone, https://www.printables.com/model/239913-blank-keystone to which i added end-stops shoulders, and a few chamfers here and there. Previous design did not sit flush with my keystone panel as nothing…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN version: The original Scan was made by the Mammal Research Institute, Polish Academy of Science during the Open Forest Data project . You can download the original data here . :) I fixed the model to make it printable. The skull is not…
Wydruk około 3,70 €–4,52 € nettoWstępna wycena jednego wariantu
Features… Aerated handle with grip bumps for comfort, lightness, ease of handling and no-slip. Subtle, yet effective 3° bend at end of sticks for a solid grip on those snacks. Teeth at the very tip perfectly come together for picking up…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
Warning: This piece is not stock. It has special dimensions, it needs an adjustment of the selector stop positions, in the MMU2S firmware. Is this moment I use: "MMU2S-TZB 3.0.3" firmware by TheZeroBeast Link:…
Wydruk około 2,13 €–2,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simply, but modern chopstick holder inspired by tradicional japanese architecture. Easy to print in vase-mode or: 0% infill 0 top and 0 bottom layers 2 outter layers Happy printing!
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Wydruk około 8,48 €–10,36 € nettoWstępna wycena jednego wariantu
This is an original model I made myself in Fusion 360. I am entering the chopstick holder competition, this is the first one I am entering. The model is based on the traditional Japanese footwear called “Geta” and functions as a wooden…
Wydruk około 0,89 €–1,09 € nettoWstępna wycena jednego wariantu
When I set up my router-bench with the Micro Jig MatchFit System, I need stops to allow me to position multiple pieces for the same routing process. Since Micro Jig does not sell the kind of stops I need, I designed my own for printing.…
Wydruk około 0,61 €–0,74 € nettoWstępna wycena jednego wariantu
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . I couldn't find a solid,…
Wydruk około 3,78 €–4,62 € nettoWstępna wycena jednego wariantu
You've got to fuel for those gains, so chop away at some tasty food. Print these tiny dumbbells to rest your chopsticks in style.
Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu
I liked the original design by @Kuba, but I needed it for two laptops, so I added a second one. It supports laptops up to 2cm thick. I also added some fabric to prevent scratching my laptop. I used eSun PLA Matte in White with 15% infill.…
Wydruk około 5,27 €–6,44 € nettoWstępna wycena jednego wariantu
This print is a remix of asteven5's Resistor Storage drawers. I needed a stackable design, so I used OpenScad to add grooves to the sides, top and bottom so they can connect. The OpenScad file has been tested for properly fitting top and…
Wydruk około 9,13 €–11,16 € nettoWstępna wycena jednego wariantu
Most people who are not born using them, have that one relative or friend who always asks for a knife and folk at the Chinese restaurant. Well, here is your answer, print one of these and they will be able to use chopsticks like the rest…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
Festool is very innovative in the further development of its tools and their details. Therefore, here is another anti-tilt for mitre cuts with the FS 55 EBQ and the FS/2 rail. Suitable for the 2011 model of the TS 55, which was the last…
Wydruk około 2,00 €–2,45 € nettoWstępna wycena jednego wariantu
Magnetized tops for Redgrass painting handle with groves for 32, 28 and 25 mm bases. Requires 8x3mm magnets. Please be aware that the 28 mm bases are not held in grooves. There are also storage plates available to manage your minis during…
Wydruk około 1,65 €–2,01 € nettoWstępna wycena jednego wariantu
Depth stops for a 5" (130mm) 3 jaw metal lathe chuck, specifically a Bison chuck. They might fit others. These stops help keep the work parallel at a specific distance from the face of the lathe chuck. I have included STL's for stops in…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
Hi! This is my first model uploaded on https://www.printables.com, so be understanding - if you have any questions - feel free to write. Stand for lollipops mounted on tubes. Tube size - external to 7mm, internal 4.5. 27mm submerged leg.…
Wydruk około 9,66 €–11,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Whether you are gaming, working on your computer, or just surfing the web, this “Hands Free Chopsticks Holder” will keep your hands and precious electronics clean. I found similar designs on Printables / Thingiverse, but they all use 3D…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It's a eyedrop squeezer for elderly person or person with arthritis. It's inspire by existing one that could be found in any pharmacy ( in Canada). At the local pharmacy, they didn't have the right squeezer for the type of bottle showed…
Wydruk około 1,57 €–1,91 € nettoWstępna wycena jednego wariantu
Following a suggestion from a maker that needed drilling depth stops for Imperial drilling bits, I reused the the Drilling depth stop (Metric) model I created and adapted my design to the main sizes used: 1/8", 3/16", 1/4", 5/16", 3/8",…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
A chopstick display stand for your favorite set of chopsticks. Designed for four pairs of chopsticks. I wanted to learn to use the displacement modifier in Blender, so I created a structural pattern of the classic Japanese wave pattern…
Wydruk około 18,75 €–22,92 € nettoWstępna wycena jednego wariantu
Model and G code for these handy castor cups for the TC100 gaming chair or any other chair with 66mm dia x 55mm wide castors. Great for stopping your gaming chair sliding around on laminate floor. You can also add some non slip mat…
Wydruk około 7,31 €–8,93 € nettoWstępna wycena jednego wariantu
You know, for the kids.
Wydruk około 1,22 €–1,49 € nettoWstępna wycena jednego wariantu
Print Tips Material: PLA Layerheight: 0.2mm (BALANCED) Perimeters: 2 Infill: Grid Support: Yes (Automatic)
Wydruk około 1,46 €–1,78 € nettoWstępna wycena jednego wariantu
Simple Chinese Takeout Box styled chopsticks rest. Designed by me from scratch. Front is plain if you want to print a symbol and apply with glue. I added a few myself that says Friendship, Prosperity, Love and Happiness. Be careful taking…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
Adapter for attaching a DC plug to the Dreamcast power supply port, e.g. for use with picoPSU. I designed this from scratch in Fusion 360, but it's based on collingall's work. My main goal was to create a model that prints well without…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Die Teleskopringe sind zweiteilig und gedacht für Teleskope mit 200mm Tubusdurchmesser. Für die Montage werden Nutensteine (vorzugsweise mit Feder) benötigt. Passen sollten alle Typen der Größe 20x12x5 oder kleiner und alle Gewinde M5…
Wydruk około 8,77 €–10,72 € nettoWstępna wycena jednego wariantu
This is a large and beautiful sculpture/artwork you can print and paint. The full dimension of the final artwork is 1x1 meters, or 100x100cm (~40x40 inches). The height of the relief is 3cm (~1 inch) at the highest point. The woman in the…
Wydruk około 10,79 €–13,18 € nettoWstępna wycena jednego wariantu
This chopstick rest features a smooth, curved top surface. The elevated design keeps chopsticks off the table to improve hygiene while providing a secure resting position. The model is optimized for 3D printing, requires no support…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
This is meant so that you can wish utensils with a thin stem such as Chopsticks, Spoons, Forks, etc in the dishwasher basket without them falling through. IMPORTANT: The models are solid. In order for this to come out in the photos you…
Wydruk około 1,19 €–1,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Allows for depth stops shallower than the 12mm minimum depth provided by the standard depth stops on the DF500. Includes: 10mm, 8mm, 6mm and 2mm I printed this in PETG. The stops can be easily snapped on or off the pull rod by hand.…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
small diameter depth stops, cone nose to aid in chip clearance and visibility, uses 3mm x 12mm Cap head bolt and 3mm hex nut
Wydruk około 1,05 €–1,29 € nettoWstępna wycena jednego wariantu
Such a cute little dino bride! Printed my version without a support around the tiara, hence the missing swirls in the picture, but I love her anyways. Be sure to add supports and be careful removing any generated supports beneath the veil…
Wydruk około 10,83 €–13,24 € nettoWstępna wycena jednego wariantu
A chopstick rest/holder with a bowl attached for Soya sauce to be held. Printed in a transparent PETG(FDA approved) on a FLSUN V400. Supports are not necessary if your printer can do a 60 degree overhang. I would also advise a 10-30%…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Usare un vite M5 e un dado M5 Use an M5 screw and an M5 nut
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
Simply, but modern chopstick holder inspired by bamboo structure. Easy to print in vase-mode or: 0% infill 0 top and 0 bottom layers 2 outter layers Happy printing!
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
My chopstick holder has the shape of a starfish. It combines decoration and functionality in one. A support structure is needed for the first layers. But the model can be pushed a little into the heating bed, then this is not required.…
Wydruk około 1,74 €–2,13 € nettoWstępna wycena jednego wariantu
Analog zu meinen anderen Teleskopschellen eine Variante für Tubi mit 140mm Durchmesser. Außerdem zwei angepaßte Varianten für meinen Motorfokus, mit entsprechendem Absatz und Aussparung.
Wydruk około 5,94 €–7,26 € nettoWstępna wycena jednego wariantu
Print-in-place laptop stand by @Cherry_Labs. I modified hook height for my 16” Macbook Pro (2023) or laptops up to 14.29mm thick, including the rubber feet. Cherry Labs recommends printing with a 0.4mm nozzle. See his model page for…
Wydruk około 4,56 €–5,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello, Welcome to my profile, full of models and miniatures :-) I have here for you Hoops for paper spools for filament Pro AMS Thanks to it, the spools unwind much better in the AMS system and do not jam. For proper operation, 2 pieces…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
Star Trek: Lower Decks , Season 4 Episode 2, "I Have No Bones Yet I Must Flee" The smaller size (50mm) is designed as a keychain, with a hole in the corner. The larger size (150mm) is designed as a plaque.
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
I made a tiny propeller for Lukas Hannert's high-speed propeller launcher found here https://makerworld.com/en/models/628601-high-speed-propeller-launcher?from=search#profileId-553231 . I made the small version of his launcher(available…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Stops for robotic vacuum cleaner for clothes dryer. Modelated on 12,35 mm tube diameter. The stops height is 30 mm. Now the vacuum cleaner will not get stuck on clothes dryer.
Wydruk około 1,59 €–1,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This simple 3D-printed end stop prevents your IKEA Drona box from going too far into the back of a Kallax shelf, ensuring it sits flush against the back wall. It's a quick and easy way to keep your Kallax tidy and organized.
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
This is my design entry for the chopstick challenge. This is printed in Polymaker PLA. Printed on an MK3s+ @ 0.2mm layer height, and with ironing for top layers on This can be printed without support material.
Wydruk około 3,09 €–3,78 € nettoWstępna wycena jednego wariantu
Modern chopstick rests design in square and circle shape.
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
Store eight minis during painting based on my magnetic tops for the Redgrass painting handle . There is also a rack to combine 3 of the bases for easy transport. Glue 5x2 mm magnets at the top of every stem to harness the power of magnets…
Wydruk około 1,40 €–1,72 € nettoWstępna wycena jednego wariantu
These simple stops slide onto your ruler and use 1 M5 Bolt to hold in place. Makes and Comments appreciated. Happy Printing!
Wydruk około 0,25 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
-This model is best printed on its smallest side to avoid using supports (all 4 long faces have curvature). There is limited flat surface area on this model. -The opposite smallest side (top, as-printed) needs to be printed with multiple…
Wydruk około 0,46 €–0,57 € nettoWstępna wycena jednego wariantu
Part compatible with original Decathlon bag holder systeme Remove locking système and install it in New main frame Main frame - no supports - PLA or PETG infill 15% Hook - no support - PLA or PETG - ajuste infill to load up to 100% for…
Wydruk około 4,02 €–4,92 € nettoWstępna wycena jednego wariantu
This is a nice sushi-shaped chopstick holder that can be very useful on your table and/or for decoration. Print printing settings ) 0.15 mm layer height ) 15% infill ) no supports I print these in PLA, but i think it is ok with other…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
This is an alternative lid for my coin drop box. In order to stimulate fine motor skills for my 1-year old, I designed this lid that lets her insert popsicle sticks in narrow slits. The slits are cross-shaped so it's a little easier as it…
Wydruk około 1,38 €–1,69 € nettoWstępna wycena jednego wariantu
These are simple but elegant chopstick holders designed after a Japanese torii gate. There is a 15 degree tilt for a better rest. I would print it on end to avoid supports. Happy Printing
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
Roman column chopstick holders for your Vaporwave old style parties. You can print this as low or high infill as you want. At 5% grid infill, you have enough support and enough place to put sand in the model to make it weighted. While…
Wydruk około 0,61 €–0,74 € nettoWstępna wycena jednego wariantu
----------------------------- Der Verstellmechanismus an meinem alten Gardena Teleskopstiel kann nicht mehr bewegt werden. Die Stange kann in der Höhe verstellt und in die jeweiligen Vertiefungen noch einrasten. Da der Verstellmechanismus…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
This is a nose-shaped chopstick holder. It was inspired by this tweet by GameStop's chairman of the board, Ryan Cohen . The photo shown here was printed with: No supports 0.4 mm nozzle 0.2 mm layer height Galaxy Silver PLA 20% infill,…
Wydruk około 1,92 €–2,35 € nettoWstępna wycena jednego wariantu
Chopstick trainers for standard takeout chopsticks
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
Om dat ik vond dat er nog zo veel ruimte boven de garagepoort was bedacht ik een klem om rond de rails te plaatsen om zo lichte spullen op te bergen. De afdruk heb ik eerst in kokend water gestoken en dan rond de rails gedrukt, anders…
Wydruk około 2,45 €–2,99 € nettoWstępna wycena jednego wariantu
Cute way to hold on to your napkins and your chopsticks. The stl provided here is solid. I chose to print it hollow with no top/bottom layers or infill … you can adapt as you like. The size as published is on the larger side to hold a…
Wydruk około 1,89 €–2,31 € nettoWstępna wycena jednego wariantu
Well, I have been asked to create badge holder for DevOps team, so I remix this excellent badge holder and added DevOps spirit :) Category: Office
Wydruk około 0,21 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Since there are no chopstick rests provided at my favorite Asian restaurant, I designed a simple chopstick rest and a holder/case to store multiple (four of those) in an orderly fashion. I got the inspiration for the basic shape from this…
Wydruk około 0,84 €–1,02 € nettoWstępna wycena jednego wariantu
For the perfect card storage I recommend the size "Base_Card_Deck.stl " for the box, you can fit a deck with 100 cards plus a sidedeck and sleeves loose in it, also I recommend the "Long Latch.stl " as latches, because it can be with the…
Wydruk około 1,64 €–2,01 € nettoWstępna wycena jednego wariantu
It is necessary to play with the diameter and width. Each round hole is a slightly different diameter (+- 1 mm). See picture for dimensions used. The outer circle is printed with luminous material so that the holes are visible at night.
Wydruk około 1,37 €–1,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This 4 cm long nozzle should be printable by most 3d printers with decent cooling. I recommend printing it in the orientation as provided with supports touching the buildplate. The thread should be printable without supports that way. Had…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
I've always loved the dogwood flower and it is frequent in Japanese iconography, along with the cherry blossom and lotus flowers. This print is quick and easy with no special settings. Shown here in white PLA+ with default 0.4mm nozzle…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena jednego wariantu
This is the Rock that you can impale in the eyes with chopsticks. it has little ski-like things for support while holding the weight of the chopsticks.
Wydruk około 1,24 €–1,51 € nettoWstępna wycena jednego wariantu
Simple to assemble and play, challenging to master. In one-player mode, try to hang as many vines as possible without the trellis tipping over. In two-player mode, win by being the last to hang a vine without the trellis tipping over. The…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
None of the chopsticks holders I found on Printables were large enough to hold my gargantuan 330mm chopsticks, so I made one. It's a simple box with a fillet on all edges, but it fits nicely in my cutlery drawer.
Wydruk około 6,86 €–8,39 € nettoWstępna wycena jednego wariantu
Der "DropStop CleanCap" ist ein innovativer Dosieraufsatz für Flüssigwaschmittel, der gezielt das Tropfen, Kleckern und Überschwappen beim Ausgießen verhindert. Das Gerät wird direkt an die Öffnung handelsüblicher Waschmittelflaschen…
Wydruk około 2,63 €–3,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to slow feed my plant water slow with ice. so i created an attachment for my chopsticks to allow for the ice to melt and drip down the choptick.
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
It's not perfect but the tolerance is tight enough to fit snugly on a standard pop socket. Can simply just slip on and off with enough force. Couldn't find an adapter so I made my own.
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
The feet on my Eibos Cyclopes Filament Drier are extremely fragile and when I bumped into my drier the foot broke clean off along with breaking the bottom panel! I created a model that slips over the broken screw peg and gives it some…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Don't believe the hype, three horns can be friends with long necks Cera! This cute and simple Triceratops dinosaur friend makes an excellent desk companion, gift for a child, or friend. They are a companion piece to my previous dinosaur…
Edit: 23. 2. 2026: I published an updated version here . It's better, so you should definitely download Gertrude instead. Edit: 23. 7. 2026: The updated version is now capable of carrying a dino rider. Try it out! This is my second flexi…
Hi everyone this is a finger chopstick I made. It has offset teeth for better grip of small objects.
Rails are designed for 6Gx20mm countersunk screws (or 4mm x 20mm)
I love dinosaurs :) This is another flexi-articulated cute little model that I made in a weekend. All overhangs were modeled at 45° to ease the fabrication process without supports. Any doubt or comment about this model please let me know…
An articulated dinosaur skeleton with a removable skull. Triceratops, Styracosaurus Xenocerotops and Diablocerotops skulls included. Easy to print and should not need supports. Print with 2 or 3 walls @.16 layer height.
ChopstickCheaters to let your kids eat with chopsticks. Easy and fast print and a lot of fun! V2 now prints with no supports. Use PETG to be able to put them in the dishwasher. PLA works fine but may not stand the heat. Made for…
Dr Doom Mask - Marvel Doctor Doom Helmet - Cosplay Props - FREE STL PREMIUM STL File for 3D Printing Follow me>>>: All My Designs: https://linktr.ee/3dprintmodelstore You can support my design work by joining my patreon at here:…
This object is part of “Scan The World”. Scan the World is a non-profit initiative introduced by MyMiniFactory, through which we are creating a digital archive of fully 3D printable sculptures, artworks and landmarks from across the globe…
Simple Triceratops Dinosaur Kit Card More Kit Cards by us @3Z3D: DinoCards: https://makerworld.com/collections/24594404 BugCards: https://makerworld.com/collections/24891663 Triceratops Dinosaur Kit Card Instructional Build Video:
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/minishev Patrons have access to all my files in one…
The doors are assembled by using filament as hinge rod. Insert it from bottom and up. The fridge is sized to fit with Sylvanian families the material should be thick enough to be re-seized to also fit Playmobil. Just contact me if that…
A simple yet elegant chopstick clip. Keeps chopsticks aligned and secure before, during, and after use. A discreet acces
Joined the four bottom parts of the original so that no screws are needed for assembly. Also made two different new tops. The middle ring remains the same as the original. Hope you like it and have fun!
I like the Finger Chopsticks from @MrDaedelus but they often slip from my fingers. It's also not possible to strech the chopsticks so i made a modded version. Normal: Diameter of the finger rings is around 22mm or 0.9 Wurstfinger. Small:…
This is a canopy for the BetaFPV Air Tinywhoops, like the Air65 and Air75. The longer tail section allows a lower camera angle to be set. I also made a widening in the area of the right holder to additionally fix the antenna connector. I…
