Orco : He Man Masters of the Universe
Orco from He-man and the Masters of the Universe.
Wydruk około 10,54 €–12,88 € nettoWstępna wycena jednego wariantu
- Polubienia
- 15
- Ocena
- 0
78 modeli
Orco from He-man and the Masters of the Universe.
Wydruk około 10,54 €–12,88 € nettoWstępna wycena jednego wariantu
My custom designed lid raiser for the Creality K1 Max. I wanted a simple version which required no additional components but allowed me to open and close the vents on the fly. Lid raisers for the K1 Max help improve the clearance between…
Fastener for lid raiser made by Tony F for the Creality K1 Max printer.
Orco from He-man *Draft Resurrection
Please make sure to use PETG as this will be holding nearly 6kg of weight Make sure to follow this exact settings to make sure the strength and a smooth print Material : PETG or PETG-CF Infill : 30% Thickness 0.2mm Support : ON And you…
This adapts the corner piece of the original file to allow you to mount the filament sensor along the riser. Tony F's File was adjusted to allow the filament sensor to be mounted, the other files were used as references and deserve credit.
K1 Max top mounted filament spool holder modded to use vented raiser from NorcoT https://www.printables.com/model/623798
A simple remix from original MK3s+ "fs-cover" and "MK3s PC4-M6 FilamentSensorCover" by RoboMagus to connect a reverse bowden setup using a PC4-M6 coupler on MK3s+.
A simple modification to the new MK3s filament sensor cover (sourced by jzkmath) to connect a reverse bowden setup using a PC4-M6 coupler.
This is a hold open for a Norcold RV fridge. Keeps the doors from closing when in storage. Printed in PETG.
MORE FREE MODELS: https://cults3d.com/es/usuarios/Artoys3dPrint/modelos-3d FDM: Best Quality possible -Raft Base -Wall Line Count 3/4 or 5 -support hovergang of 20 -Layer height of 0.12 -Print Speed 30 -Travel Speed 130
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Dark Gray At layer #15 (1.28mm) swap to Grey At layer #21 (1.76mm) swap to White for the rest.
This mount helps to mount a Corsair Xeneon Edge display to a Moza wheelbase to use it as a dash for simracing. Requires 2x M3x10mm and 2x 10mm 1/4"x20 bolts (AV standard) to secure. The dovetail design allows for removal of the dash when…
I have a Norco 4220 Server chassis and since they went out of business spare parts are no longer available. So I created this model to replace the stock 80mm fan bracket. I did not add the holes for the screws on the sides and bottom as a…
Print with no support The designe is able to arrange multi-color layers for customization
Wall Mount for a BMZ /Norco eBike Charger
Nothing special for print settings. I used PLA @.2mm layer height in a Bambu P1S set to fast speed with automatic normal supports; printed in the same upright position as it would be when mounted to the wall. I used 3 walls and 20%…
I couldn't find a door prop I liked for the fridge in my camper, so I made one. This latches into the catches on the fridge and the door pins, creating a pretty sturdy arrangement that will allow the fridge and freeze to breathe to…
A simple guard that snaps on to the head of a six blade Dorco razor. Most of the guards I've found slip on and will then slip off in a gym bag. This snaps on to prevent that from happening. Printed in PETG at 30% infill and that seems to…
This is a 3D printable adaptation of the metal Savoia S-21 model sold to the Ghibli Museum (last photos). For manufacturing I used a layer height of 0.16mm with a 0.4mm nozzle for size 4, and I used a layer height of 0.1 with a 0.2mm…
Auto align onto build plate in Orca and print at 35% infill. I used PLA and it seems to last
A few additional RC parts for my Type 21 U boat from rcsubs.cz. A waterproof motor nacelle to accommodate two 35mm brushless motors. Shafts sealed with 15x6x5 oil seals and a screwed-on cover. Can be bolted to the original mounting points…
My friend broke the handle on his Norcold RV fridge. I modeled and printed a replacement for him and thought I would share it in case anyone else needs it. His fridge is installed in such a way that I was able to strengthen the part…
I just combined them all in 1 print
My OEM Norcold RV refrigerator drying latch was bending and about to break so I replicated it in Fusion360 for easy replacements. This is a pretty close replica and now that it's out of the way, I intend to do a 2.0 where I try to improve…
Egg tray in refrigerator LG DoorCooling+ GA-B509CCIL
Štvorcový vykrajovač cesta s hranou 8 cm napr. pre pirohy, šatôčky alebo šišky. Tlačene z PLA. Gcode je naslicovaný pre MK3S s viacerími nastaveniami pre podpery a hranu vykrajovača. Pozri aj vykrajovač okrúhly. (…
Took the measurements from the original holder and added a holder for EU power plug.
NorCold 2118SST refrigerator Drawer Slider/Hinge replacement I designed this as a replacement using the original as a model. Norcold Filed for bankruptcy and liquidated assests. Certain of Norcold’s assets were acquired by Dave Carter &…
For the second model, Porco Rosso, I tried something more difficult as I continue to learn modeling. Please give me some feedback on the model as I continue to learn. 2/6/25 - Teeth of the model are thin and causes internal mouth…
Porco Rosso Savoia S21 supports. Horizontal and bended. Add on for thingiverse https://www.thingiverse.com/thing:3924395 Please like.
I'm using 100mm PLA-printed reducers with a 150mm bathroom exhaust fan, which I purchased from my local store. It's also available on AliExpress." Let me know if you'd like any further refinements!…
Divided box with standoffs to hold a Dorco Pace 6 razor handle in place, and a compartment for a small can of shaving cream.
Mount for Corcom 20A IEC C20 inlet for RatRig VCore 3 systems using the V1 enclosure. Split into 3 parts for easy printing. BOM Corcom F7892A - https://www.te.com/usa-en/product-6609007-3.html 4x M3x20 (or larger) Countersunk screws 4x M3…
Print Settings Printer brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Filament brand: GST3D Filament color: ANY!!! Filament material: All work. I used PLA+
(english below) Es handelt sich um Entwicklungsmodell für einen Ersatzschlauch für Audi 048103223A. Der eckige Prototyp lässt sich gut drucken. Es gibt auch eine abgerundete Version, welche ich allerdings noch nicht gedruckt habe, da ich…
One of the spring holders broke for my Norcold RV Freezer, so I removed both, and since they're mirrors of each other, I used the one good one to measure to make the new ones. For material, I used ASA 275. Supports: Required Because…
This is a custom bearing extractor and bearing receiver for 8 of the 12 bearings used in a Norco Fluid rear suspension. The other 4 bearings will require you punch them out or use a sliding hammer bearing puller sadly. Additionally, the…
I designed this clip to keep the fridge and freezer doors of our Norcold N8DCSSR unit propped open a couple inches while off or in storage. We have a 2022 Airstream International but I imagine there's not too much difference between…
Transforme seu espaço de trabalho em um verdadeiro escritório alviverde com a placa "The PorcOffice"! Placa feito para torcedor do Palmeiras, essa placa divertida une profissionalismo e paixão pelo Verdão, perfeita para quem trabalha com…
This is a cover for the X-axis stepper motor. Specifically to include a mountpoint for a flatcable clamp. There are other similar designs but I did not like them enough so I build this one. I printed with a lot of supports to keep the…
For some reason this 2nd hand bike didn't have a chain protector. Not sure if this original or not. Whoever, our daughter came home with trousers covered in chain grease several times. Thus I printed this. Came out quite well.
Rozmer nádobky: 50 x 50 x 60 mm (š x d x v) Vnútorný rozmer misky: 56 x 56 x 12 mm (š x d x v) Hrúbka steny: 1,575 mm Tlač: 3 perimetre Výška vrstvy: 0,3 mm Materiál: PLA Nádobka a miska je vytvorená v programe FreeCAD.
Bring instant holiday vibes to any doorway with this clean, 2025 modern Snowman Snowflake Door Corner Ornament . Designed to sit perfectly on top of a door frame or shelf edge, this piece adds a cozy winter touch without nails, screws, or…
BookMark inspired in Porco Rosso movie
A simple camera mount that works with the K1 MAX NorcoT Riser, for any small camera with a tripod mount! This mod simply slides over a side on the NorcoT Riser or other riser. You will need a 1/4" Tripod mount screw- OR you can print this…
Kleine Füsse / Support um Plastoform Florio Klickfliesen auf etwas unebenem Untergrund zu verlegen. Höhen 1-10mm. Passen in 10mm Aufnahmen an der Trägerkonstruktion aus Polypropylen Copolymer. Print Settings Printer: Multirap 420 2Move…
This is a replacement foot for an old Norco brand indoor bike trainer stand. I do not know the model number. The original part was rubber, so I printed this in TPE and it ended up being just about right with the settings I chose: Print…
This is my solution to extend Motorcables including phoenix connectors and a Cable strain relieve. You need: 1x Cable gland M16 (2x if you use the "2 Outlet cover" Variant) 1x Phoenix connector ( the cover fits up to 2x 4-Phoenix…
Back plate for https://www.thingiverse.com/thing:4666567 to fit Sensorcon Inspector CO detector. Print the bracket from the original thing. You will need a longer screw for mounting the back plate to your detector. Print Settings Printer…
Sabertooth 2x60a Motor controller without heatsink fan
My TE-AG 18/115 from Einhell did ugly noises so took it apart and found a broken rubber disk that connects the motor with the gear. So quick walt to modeling and printet in 85A TPU - and could finish my work. Maybe it helps somebody out…
https://photos.app.goo.gl/tiiuRh3Dfsa4QNRy7 - video An Orcon boxcutter knife blade guard / sheath that can be hung onto my peg board pegs: https://www.printables.com/model/42711-peg-set-adaptors Also included plain sheath I printed it…
Made adapters for NORCO RL-20 1U sliding rails. Fits perfectly. Downside that rails are too short and for maintenance I need to slide server fully out. For each side you need to print one front and one rear peace. Rails:…
Norcold 1200 refrigerators use plastic hinges with a bushing riding on a metal pin. After almost 20 years, both lower hinges of my Norcold 1200 failed. My search for a replacement part for this particular model was unsuccessful. (Use…
Quick razor cover for the 6 blade DORCO SXA2000 and SXA3000 razors
KitchenLampConnectorCover Krytky na 230V EURO zástrčku/konektor na podlinkové svítidlo do kuchyně aneb když má svítidlo konektor na druhé straně než vy máte kabel ke světlu
Happy Easter Front Door Coaster Decoration. Coloring project for the family.
This is a fan guard for core one+ extruder 40mm fan. Print setting: nozzle diameter 0.4mm , layer height 0.2mm, material PETG
The Corcovado statue on its chapel pedestal, printed as one solid piece. The robe carries vertical folds, the arms have sleeve cuffs and modelled hands, and the head is shaped with hair and a beard. The pedestal has three base steps, a…
Cable port blanking plate for Generation 4 Norco Sight/Range VLT (and non ebike Sight). Print at 0.08mm in PETG for strength/accuracy
The plastic parts of my Norcold 1200 electric/propane refigerator/freezer installed in a 2006 RV are getting brittle. Last summer the bottom hinge piece gave out (see model below) and the top freezer piece gave way after another trip to…
This adapts the corner piece of the original file to allow you to mount the filament sensor along the riser. Tony F's File was adjusted to allow the filament sensor to be mounted, the other files were used as references and deserve credit.
I couldn't find a door prop I liked for the fridge in my camper, so I made one. This latches into the catches on the fridge and the door pins, creating a pretty sturdy arrangement that will allow the fridge and freeze to breathe to…
For the second model, Porco Rosso, I tried something more difficult as I continue to learn modeling. Please give me some feedback on the model as I continue to learn. 2/6/25 - Teeth of the model are thin and causes internal mouth…
(english below) Es handelt sich um Entwicklungsmodell für einen Ersatzschlauch für Audi 048103223A. Der eckige Prototyp lässt sich gut drucken. Es gibt auch eine abgerundete Version, welche ich allerdings noch nicht gedruckt habe, da ich…
This mount helps to mount a Corsair Xeneon Edge display to a Moza wheelbase to use it as a dash for simracing. Requires 2x M3x10mm and 2x 10mm 1/4"x20 bolts (AV standard) to secure. The dovetail design allows for removal of the dash when…
NorCold 2118SST refrigerator Drawer Slider/Hinge replacement I designed this as a replacement using the original as a model. Norcold Filed for bankruptcy and liquidated assests. Certain of Norcold’s assets were acquired by Dave Carter &…
KitchenLampConnectorCover Krytky na 230V EURO zástrčku/konektor na podlinkové svítidlo do kuchyně aneb když má svítidlo konektor na druhé straně než vy máte kabel ke světlu
Sabertooth 2x60a Motor controller without heatsink fan
Kleine Füsse / Support um Plastoform Florio Klickfliesen auf etwas unebenem Untergrund zu verlegen. Höhen 1-10mm. Passen in 10mm Aufnahmen an der Trägerkonstruktion aus Polypropylen Copolymer. Print Settings Printer: Multirap 420 2Move…