Wyniki wyszukiwania: ornament

Sortowanie

6622 modeli

P
PrintablesCalebTimoteo

Millennium Falcon Star Wars - Christmas Ornament

Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.2-0.28mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)

Wydruk około 2,55 €–3,12 € nettoWstępna wycena jednego wariantu

Pobrania
6419
Polubienia
1706
Ocena
4,94
P
Printablesthiebes

Heart spinny fidget toy ornament for Valentine's Day, Christmas, etc.

Nested hearts print in place with no supports for a rotating fidget toy or hanging decoration. Choose with or without a loop for hanging. You can also pop the hearts out and replace them with different colors, by squeezing the outer heart…

Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu

Pobrania
4285
Polubienia
743
Ocena
4,89
P
Printablesmeron

angels and bells - hangable Christmas ornaments - fast print (11-28 min)

Folding Christmas decorations inspired by paper cutouts from school years. Used PLA and PLA+ filaments. Printed on Original Prusa MINI+ with standard PLA preset without any problems. Manual filament change required after the second layer…

Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu

Pobrania
3645
Polubienia
766
Ocena
4,93
P
PrintablesBrunoCRO

Christmas tree hooks - ornament hooks

Quick to print and optimised for 0,4mm nozzle much needed tree hooks every Christmas… Enjoy!!

Wydruk około 0,63 €–0,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
2774
Polubienia
650
Ocena
4,95
P
PrintablesCalebTimoteo

Darth Vader & StormTrooper Star Wars - Christmas Ornament

Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

Wydruk około 2,59 €–3,17 € nettoWstępna wycena jednego wariantu

Pobrania
2759
Polubienia
801
Ocena
4,94
P
PrintablesChoPrints

Spinning Christmas Ornament

This is an ornament to hang on your Christmas Tree. It has inner rings that can spin and a small snowflake in the center that can also spin.

Wydruk około 1,20 €–1,47 € nettoWstępna wycena jednego wariantu

Pobrania
1789
Polubienia
223
Ocena
5
P
PrintablesMaxT

Christmas Door Trim Corner 16 - Gingerman (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Wydruk około 1,87 €–2,28 € nettoWstępna wycena jednego wariantu

Pobrania
1281
Polubienia
289
Ocena
5
P
Printablesdavidspindola

Star Wars Christmas Ornament Death Star

Death Star Ornament The model comes in a big size, so you can modify it to fit your tree style or use the bottom as a bowl. It was printed in 40% and 50%, it worked great. Once the bowl print is ready I will share the results. There is a…

Wydruk około 2,14 €–2,62 € nettoWstępna wycena jednego wariantu

Pobrania
1127
Polubienia
240
Ocena
4,92
P
Printablesdjkirkendall

Snailien (snail-alien xenomorph mashup) lawn ornament

This is a mashup of a Snail and Alien Xenomorph we sculpted as I wanted one for my front porch. Use gyroid infill at 5%, drill a 1" hole in the bottom, and fill it with plaster to give it weight so the wind won't take it away. It's a easy…

Wydruk około 20,74 €–25,35 € nettoWstępna wycena jednego wariantu

Pobrania
1110
Polubienia
162
Ocena
5
P
PrintablesChya

Halloween Bats Hanging Ornaments

I designed these bats to arrange a scary spider web on a lamp in the living room. I prepared the web with strings and hung the bats and a creepy 25 cm spider. Bats Dimension Bat 1 - 160x74x5.5 mm Bat 2 - 160x85x5.5 mm Bat 3 - 160x76x5.5…

Wydruk około 1,79 €–2,18 € nettoWstępna wycena jednego wariantu

Pobrania
803
Polubienia
123
Ocena
5
P
PrintablesSASSy Design

Foldable Christmas tree - Home decor - Winter ornament decoration

Our new foldable Christmas tree! Please let us know what you think of this year's version! And to all of you… Happy Holidays and an Amazing New Year! Used Filament: This model was printed using ROSA 3D PLA-Silk Gold The ROSA 3D team was…

Wydruk około 1,89 €–2,31 € nettoWstępna wycena jednego wariantu

Pobrania
782
Polubienia
237
Ocena
5
P
PrintablesDazus K

Spiral Christmas Stretch Ornament 2024

This is the second in a series of four spiral ornament designs. With my settings, it weighs just 7g. This season, I plan to publish one Christmas ornament a day. Follow me to stay up to keep up to date. I originally printed my stretch…

Wydruk około 3,59 €–4,39 € nettoWstępna wycena jednego wariantu

Pobrania
748
Polubienia
342
Ocena
4,75
P
PrintablesdaGill

Spinning Globe Ornament

A model by my 15-year-old son. This interesting and functional spinning globe ornament was made after learning how to project a two-dimensional image onto a spherical object. A map of the world being the most obvious candidate for such an…

Wydruk około 0,61 €–0,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
703
Polubienia
75
Ocena
4,33
P
PrintablesSASSy Design

Modern origami Christmas tree - Home decor - Winter ornament decoration - Vase mode

The 2025 Christmas Tree is out! Please let us know what you think of this year's version! And to all of you… Happy Holidays and an Amazing New Year! Used Filament: This model was printed using ROSA 3D PLA-Silk Emerald Green & Gold The…

Wydruk około 2,75 €–3,36 € nettoWstępna wycena jednego wariantu

Pobrania
688
Polubienia
200
Ocena
5
P
PrintablesMaxT

3 Snowflakes inside a bauble (Christmas tree ornament)

https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…

Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu

Pobrania
465
Polubienia
36
Ocena
4,67
P
PrintablesCalebTimoteo

Donald Trump Christmas Ornament

Nozzle: 0.4mm Layer: 0.16-0.24 (Recommended) Supports needed

Wydruk około 1,78 €–2,18 € nettoWstępna wycena jednego wariantu

Pobrania
301
Polubienia
71
Ocena
4,5
P
PrintablesSteveT

Snare Drum Keychain / Ornament

My son Stephen created this model after searching for a nice simple-to-print snare drum and being unable to find one. The print does not require any supports (at least on my MK4) and is printed in one piece. You can use a low 10% infill…

Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu

Pobrania
300
Polubienia
26
Ocena
5
P
PrintablesSot Kon

Christmas Ornament

Easy to print Christmas Ornament Settings: 0.2 quality 100% infill PLA No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models

Wydruk około 1,19 €–1,46 € nettoWstępna wycena jednego wariantu

Pobrania
279
Polubienia
23
Ocena
5
P
PrintablesIan Foulds

Escher Style Starfish 3D Tessellation Ornament Tile

This remix provides two different versions of the tessellation tile that have either a hole or a loop for turning the tessellation into an ornament. I love the model by @RobertSoto_503356, it is a real work of art. I previously remixed it…

Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu

Pobrania
248
Polubienia
136
Ocena
4,8
P
Printablesjfromel

Holiday Coaster - Fidget - Ornament (toture test)

Get in the holiday spirit and set the table with these fun coaster fidgets. You can also hang them on the holiday tree if you run a string through the infill mesh. That is if your printer can handle it, the tolerance between the rings is…

Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu

Pobrania
235
Polubienia
46
Ocena
5
P
PrintablesTaha Güler

Tofaş Rearview Mirror Ornament

Tofaş Rearview Mirror Ornament

Wydruk około 1,50 €–1,84 € nettoWstępna wycena jednego wariantu

Pobrania
224
Polubienia
6
Ocena
0
P
Printablesjlc_1988

Deathly Hallows Earrings/Christmas Tree Ornament

An earring in the shape of the deathly hallows with an interior spinning Sorcerer's Stone. This model comes in 2 versions, one where the sorcerer's stone moves freely up and down (v1) and one where the sorcerer's stone is prevented from…

Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu

Pobrania
216
Polubienia
71
Ocena
5
P
PrintablesNina Máčová

Ornamental number 2 (1)

20 cm, topper, house number, bookmark, stencil

Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu

Pobrania
159
Polubienia
45
Ocena
5
P
PrintablesPeter Farell

Santa Skulls 3 Christmas Ornament

Native American Design Elements Santa Skulls 3 Christmas Ornament

Wydruk około 9,05 €–11,06 € nettoWstępna wycena jednego wariantu

Pobrania
156
Polubienia
63
Ocena
5
P
PrintablesJoaelso

star tree ornament - Stern Baumschmuck

es gibt eine größer und eine kleinere Version Druck: 0,2 mm Düse: 0,4 mm Unterstützung: Nicht erforderlich Rand: Nicht erforderlich Infill: 0% Schöne Weihnachten!

Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
148
Polubienia
13
Ocena
5
P
PrintablesRobin Josef

A Christmas ornament safe box / untraditional gift box

Whether you want to hide a small object that nobody notices or want to bestow somebody with a little gift in untraditional packaging, this is an ideal option for you! For fastening, simply twist both halves. Printing Designed to be…

Wydruk około 3,26 €–3,98 € nettoWstępna wycena jednego wariantu

Pobrania
145
Polubienia
58
Ocena
5
P
PrintablesDrawnToDigital

Insert Coin To Play Ornament

Perfect for those who enjoy arcade-era nostalgia, this "25¢ | Insert Coin To Play" coin slot was turned into a holiday ornament. The distinct "glowing" red lettering is achieved through an easy 2-color print, segmented at a 5.20mm layer…

Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu

Pobrania
144
Polubienia
108
Ocena
5
P
PrintablesPeter Farell

Santa Skulls 4 Christmas Ornament.

Santa Skulls 4 Christmas Tree Ornament.

Wydruk około 4,06 €–4,96 € nettoWstępna wycena jednego wariantu

Pobrania
130
Polubienia
42
Ocena
0
P
PrintablesJJ XX

Boston Celtics Logo Xmas Ornaments (Clover Logo + Single Color Lucky Leprechaun)

Be sure to print with color change to get multiple colors. Also if you want to modify the OpenSCAD file for lucky the leprechaun be sure to get the PNG from the photos section. (Posted to reddit as /u/NoveltyAccountHater ).

Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu

Pobrania
120
Polubienia
5
Ocena
0
P
PrintablesPeter Farell

Ukrainian Folk Design Santa Skull Ornament.

Ukrainian Folk Design Santa Skull Ornament.

Wydruk około 4,37 €–5,34 € nettoWstępna wycena jednego wariantu

Pobrania
115
Polubienia
46
Ocena
5
P
PrintablesAsphalt3D

Peace on Earth Rotatable Print-in-Place Ornament with Built-in Hook

Peace on Earth Ornament Celebrate the festive season with a meaningful touch by displaying the “Peace on Earth” Ornament. Designed to embody harmony, this all-white, elegant ornament is adorned with the famous saying: Peace on earth and…

Wydruk około 1,72 €–2,10 € nettoWstępna wycena jednego wariantu

Pobrania
102
Polubienia
21
Ocena
5
P
PrintablesNina Máčová

Ornamental number 2 (1)

20 cm, topper, house number, bookmark

Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu

Pobrania
94
Polubienia
27
Ocena
0
P
PrintablesNina Máčová

Ornamental number 4 (3)

20 cm, standing, toppers, stencil, bookmark, house number

Wydruk około 0,24 €–0,30 € nettoWstępna wycena jednego wariantu

Pobrania
87
Polubienia
20
Ocena
0
P
PrintablesStoneman

Chrismas Ornament (bulb)

Simple Christmas ornament with Christmas 2020 on it, put in a blank one if you would like to personalize it. Print instructions Category: Decor Summary Simple Christmas ornament with Christmas 2020 on it, put in a blank one if you would…

Wydruk około 2,80 €–3,42 € nettoWstępna wycena jednego wariantu

Pobrania
84
Polubienia
8
Ocena
0
P
PrintablesZbyněk Král

Darkhold - Ornaments only

My son found a video of YouTuber @CardboardCosplay making Darkhold. It's all made of cardboard. However, I decided to model the main ornaments and then print them on a 3D printer. Well, I think the result looks really cool. Print…

Wydruk około 1,84 €–2,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
78
Polubienia
7
Ocena
0
P

Christmas Tree Ornament - 54 mm tall for Mailing

This 54 mm tall ornament is made in two flat pieces so it can be mailed. When put together, they form a 3-dimensional ornament for decorating the tree. A larger, 88 mm tall, similar ornament is also available in another download.

Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu

Pobrania
69
Polubienia
18
Ocena
4,67
P
PrintablesDazus K

Lantern Christmas Stretch Ornament 2024

This design has complex geometry reminiscent of an old lantern. Rotate it - it looks different from every angle! With my settings, it weighs almost nothing. This is the second in a series of four lantern ornament designs. This season, I…

Wydruk około 4,14 €–5,06 € nettoWstępna wycena jednego wariantu

Pobrania
67
Polubienia
16
Ocena
0
P
PrintablesSot Kon

Grinch Christmas Ornament

Grinch Christmas Ornament Added strings and made the Grinch different type of ornament Be sure that you have arachne on in your slicer Keep the speed in normal range 60 to 100 mm/s No supports are needed If you have multicolor printer in…

Wydruk około 1,84 €–2,25 € nettoWstępna wycena jednego wariantu

Pobrania
65
Polubienia
9
Ocena
0
P
PrintablesDom

2025 Spinning Christmas Ornament

Customized version of the Spinning Christmas Ornament by ChoPrints. Thanks ChoPrints for the original model! Replaced the loop with 2025. Thinned out the model a little so it can be mailed with a card too. Needs to be < 1oz with a card…

Wydruk około 2,75 €–3,36 € nettoWstępna wycena jednego wariantu

Pobrania
64
Polubienia
11
Ocena
0
P
PrintablesSHR3D.eu

Tessellation Horse Ornament

small tessellation horse modified for multicolor printing using the M600 command. Three-color and two-color versions are available.

Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu

Pobrania
64
Polubienia
35
Ocena
0
P

Ornament Facebook Jail Repeat Offender

Facebook jail ornament for Christmas trees. You will need an itsy bitsy tiny drop of epoxy glue to hold the three parts together (unless you print them as one using the MMU2S).

Wydruk około 0,05 €–0,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
62
Polubienia
15
Ocena
0
P
Printables3D'ci

Twin Towers Fish Tank Ornament

ı designed looks like twin towers fish tank ornament and pretty good design ı think.

Wydruk około 22,29 €–27,25 € nettoWstępna wycena jednego wariantu

Pobrania
53
Polubienia
5
Ocena
0

Electric Callboy Christmas Ornament

A super simple model to make a Christmas ornaments for Electric Callboy with color changes. If you like to, check out my other designs too!

Wydruk około 2,10 €–2,56 € nettoWstępna wycena jednego wariantu

Pobrania
50
Polubienia
13
Ocena
0
P

Sleigh for Mailing-Christmas Ornament

The four pieces that make up this sleigh ornament fit snuggly together. If sent with a Season's Greeting, point out that it is easier to put the seat onto the sides before inserting the back into the sides. There is space to add your…

Wydruk około 1,28 €–1,57 € nettoWstępna wycena jednego wariantu

Pobrania
41
Polubienia
9
Ocena
0
P

Mail Truck Christmas tree ornament - Thin for mailing

This ornament reminds us of the mail truck's participation in Christmas giving. It is less than ¼" thick, so can be mailed in a standard envelope. If you work with Fusion, you can add indented names to the back. You can print in multiple…

Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu

Pobrania
41
Polubienia
10
Ocena
0
P
PrintablesWil

Geometric Snowball Ornament w/ Window (2024)

A randomly generated geometric snowball ornament! The main body should be printed with support, mainly for the step at the opening and highest inside area. The window was printed in clear PETG on a small piece of glass from home-depot…

Wydruk około 1,72 €–2,10 € nettoWstępna wycena jednego wariantu

Pobrania
32
Polubienia
12
Ocena
0
P
PrintablesSot Kon

Jack Skellington Christmas ornament

Jack Skellington Christmas ornament Be sure that you have arachne on in your slicer Keep the speed in normal range 60 to 100 mm/s No supports are needed If you have multicolor printer in the slicer you can add colors Njoy Below is the…

Wydruk około 1,78 €–2,17 € nettoWstępna wycena jednego wariantu

Pobrania
27
Polubienia
9
Ocena
0
P
Printables3DKeyser

Snowflake Ornament

Its a Christmas ornament in the shape of a snowflake. Pretty simple. (This was someone else's original creation that I found online and remixed but I could not for the life of me find the original design) File is shown with some example…

Wydruk około 0,86 €–1,05 € nettoWstępna wycena jednego wariantu

Pobrania
27
Polubienia
7
Ocena
0
P

Christmas tree ornament-2 piece for mailing

Each piece is about 1/8 inch thick, so they should be able to be mailed in a standard envelope. To obtain the see-through infill pattern, set the print to: Walls 5; Infill 30% / Archimedes; Top/Bottom 0 (to provide circled interior view).…

Wydruk około 0,24 €–0,30 € nettoWstępna wycena jednego wariantu

Pobrania
26
Polubienia
2
Ocena
0
P
PrintablesSpool Designs

Ornament Shoelace Decoration | 1 Hour Print

Christmas Countdown! Follow Us! This is likely our last one of the year! Thanks for your support, we had a lot of fun doing these, check out our other models here Christmas 2022 ! Happy Holidays! Ornament Shoelace Decoration Quick print…

Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu

Pobrania
23
Polubienia
11
Ocena
5
P
PrintablesDiana Šinková

Ornament of musical instrument - CIMBALOM

Ornament of musical instrument - CIMBALOM Multicolor by layers (simple extruder)

Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu

Pobrania
22
Polubienia
3
Ocena
0

Electric Callboy Christmas Ornament V2

A super simple model to make a Christmas ornaments for Electric Callboy with color changes. If you like to, check out my other designs too!

Wydruk około 1,40 €–1,71 € nettoWstępna wycena jednego wariantu

Pobrania
21
Polubienia
2
Ocena
0
P
PrintablesPhaZee

Festive Snowman Coaster & Ornament Set - 3D Printable Holiday Decor

Add a festive touch to your holiday season with this charming 3D-printed Snowman Set! Featuring a versatile snowman design, this set includes both a coaster and a hanging decoration, perfect for winter vibes. Printed with a 0.4mm nozzle…

Wydruk około 0,40 €–0,48 € nettoWstępna wycena jednego wariantu

Pobrania
20
Polubienia
8
Ocena
0
P
PrintablesDS3D4U

DS3D4U printable snowflake ornaments/earrings

Files are setup as single extruder multi-color. Print tested @ 0.15mm layer height with Atomic filament tropical sea and pearly peach.

Wydruk około 1,64 €–2,00 € nettoWstępna wycena jednego wariantu

Pobrania
15
Polubienia
4
Ocena
0
P
PrintablesOpenscaddad

CandyCornicopia Ornament

This is from my Openscad Cornicopia design but adds an attachment loop. When printed in three colors, it resembles Candy Corn. You can print this with or without the ring. If you print it as my photos show, it will hang more horizontally.…

Wydruk około 5,57 €–6,80 € nettoWstępna wycena jednego wariantu

Pobrania
13
Polubienia
8
Ocena
0
P

Bell - Christmas Ornament for Mailing

The two pieces break apart and have a press fit together to make a Christmas ornament bell. You can paint the lettering or not. I found acrylic to be effective and fast-drying (compared to oil-based paint),

Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu

Pobrania
12
Polubienia
1
Ocena
0
P
PrintablesPutocreo

Ornamental fountain diffuser.

Spare part for a trumpet-shaped ornamental fountain diffuser. Includes a threaded element as the fixing accessory. I needed it, so I redesigned it with some improvements. I love solving problems with 3D printing.

Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu

Pobrania
11
Polubienia
6
Ocena
0
P
PrintablesPatrick

Christmas ornament present tag

This is my new christmas present name tag for this year. It represents a christmas ornament. You can change the name in your favourite slicer. I use prusa slicer.

Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu

Pobrania
11
Polubienia
2
Ocena
0
P
PrintablesOligarchsThorn

MorganWallen_Xmas_Ornament

images of Morgan Wallen tour shirts on four sides of Holiday tree ornament built in MS Builder

Wydruk około 19,79 €–24,18 € nettoWstępna wycena jednego wariantu

Pobrania
8
Polubienia
2
Ocena
0
P
PrintablesLostboyslab

Christmas ornament hexagon white/grey

A STYLE COLLECTION HOME Christmas Ornament is designed to bring modern sophistication to your holiday décor. The Hexagon ornament showcases a bold, geometric shape with a smooth matte finish—elevated by a silky strap that ties the design…

Wydruk około 1,81 €–2,21 € nettoWstępna wycena jednego wariantu

Pobrania
6
Polubienia
0
Ocena
0
P
PrintablesPeter Farell

Mary Poppins Earrings / Ornament

Mary Poppins Earrings / Ornament

Wydruk około 3,27 €–4,00 € nettoWstępna wycena jednego wariantu

Polubienia
6
Ocena
0
P
Printablesfixumdude

Snowflake TIE Fighter Kit Card Ornament

UPDATE (Nov 2025): Based on user feedback, the tight tolerance cards and parts have been tweaked to add more clearance between parts for easier assembly. UPDATE: Trying to simplify a little bit, so the version of each file with slightly…

Pobrania
44 888
Polubienia
12 222
Ocena
4,91
P
PrintablesPopandsicle

Christmas Tree Ornament Set (Vase Mode Prints)

A full set of six unique Christmas tree ornament designs, all designed and optimized to print cleanly and reliably using vase mode, keeping the ornaments light weight, and preventing them from weighing down the branches of your Christmas…

Pobrania
39 379
Polubienia
10 633
Ocena
4,94
P
PrintablesRetroMaker

Snowglobe Votive Ornament - Winter Cabin

This large ornament or tabletop decoration (~5" diameter) uses a standard tealight LED candle (38mm diameter) to light it from within. If you have a tealight of a different size, I would scale the model to adjust to it's diameter. Print…

Pobrania
38 807
Polubienia
6695
Ocena
4,9
P
Printablesjamesgt

Voronoi deer ornament

See my original model . Most of the voronoi deer models were too big to my Kodama Trinus small print bed (120mm). Downscaling them made too thin walls, so I had to take a solid model, downscale and voronize it myself. Should be fine…

Pobrania
23 029
Polubienia
5051
Ocena
4,88
P
PrintablesHank

Snowman Tea-Light Ornament – 3D Printed Holiday Glow

Copyright Notice ⚠ WARNING This design is an original work by the creator and is protected under the Creative Commons 4.0 International License. Unauthorized reposting, claiming authorship, or distributing this model or its images—whether…

Pobrania
19 729
Polubienia
3115
Ocena
4,97
P
PrintablesOld Lady

Christmas Tags/ Christmas Ornaments

More tags you can find here: https://www.printables.com/model/1079716-christmas-tags-christmas-ornaments-20 https://www.printables.com/model/1080601-christmas-angels-christmas-tags-christmas-ornament

Pobrania
18 841
Polubienia
3200
Ocena
4,91
P
PrintablesJosef Průša

Grinch Christmas ornament

Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…

Pobrania
17 842
Polubienia
3264
Ocena
4,97
P
Printablesh3li0

christmas ornaments

christmas ornaments three designs for christmas ornament spheres dimensions in mm: ~ 76mm diameter there will be some small overhangs in the top of the sphere, which don't really impact and are not visible as they are on the inside,…

Pobrania
15 596
Polubienia
4048
Ocena
4,95
P
Printablesbasti30

Snowflake X-Wing Kit Card Christmas Ornament

Snowflake Star Wars X-Wing Kit Card This is the perfect companion for the Snowflake TIE Fighter Snowflake Themed Star Wars X Wing Kit Card can be used as a Christmas Tree ornament or as a last minute present. This Kit Card is based on the…

Pobrania
14 517
Polubienia
4206
Ocena
4,92
P
PrintablesJack

String Ornaments

If you like these maybe you also like my Stringart Stars or the bigger Stringart Flower

Pobrania
13 120
Polubienia
3958
Ocena
4,95
P
Printables29flo

Gothic Ornamental Chess Set

If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…

Pobrania
12 617
Polubienia
2838
Ocena
4,86
P
Printables3D PRINT

Christmas ornament with articulated legs

Christmas ornament with articulated legs. Print without support and 0% infill! Let the build plate cool down and don't warp the warm build plate to get the part of as the hands can break of the model.

Pobrania
7952
Polubienia
1247
Ocena
4,83
P
PrintablesPRNTR3D

Spiral Ornament by PRNTR3D - Super Easy Print - Vase Mode

Dont forget to post your makes! I use the following settings to print this model with a hole for hanging: Orientation: Top Brim: 5mm Mode: Vase Bottom layers: Enough to get two layers into the spiral, about 40 for 0.3mm or 60 for 0.2mm…

Pobrania
7746
Polubienia
1869
Ocena
4,99
P
PrintablesMaxT

Christmas Door Trim Corner 18 - Santa Sleigh and Reindeer and Christmas Tree (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Pobrania
7243
Polubienia
1619
Ocena
4,96
P
Printablesuetam3

Christmas Ornament Set – Stars, Snowflakes, Bells & Trees

This is a collection of simple to print 3D Christmas ornaments , including snowflakes, stars, bells, trees and many more. The set contains over 15 original designs created by me in Blender to ensure clean proportions, sharp details and…

Pobrania
7224
Polubienia
1271
Ocena
4,94
P
PrintablesLyl3

Customizable Christmas Name Ornament

Customizable Christmas Ornament - Name Ornament - Snowflake Ornament This is a customizer for Christmas ornaments which allows for any text in any font. There is a choice of six different snowflakes which can be placed in four set…

Pobrania
7191
Polubienia
991
Ocena
4,91
P
PrintablesChad Birchem

Interlocking Spiral Christmas Ornament - No Supports!

Christmas ornament or holiday fidget toy. There is a hole in the top to feed a string or ornament hook to hang from your tree just download the "snappable" version. In this version the two pieces snap together so it can hang from a…

Pobrania
7149
Polubienia
1322
Ocena
4,95
P
PrintablesJohination

Christmas Ornament Collection Chrismas Tree / Weihnachtsdeko für Christbaum

change the color of the filament at 5 mm to accentuate the inlay. check out my other christmas designs: SNOWFLAKE ORNAMENTS MERRY CHRISTMAS FRÖHLICHE WEIHNACHTEN COLLECTION GNOME ORNAMENTS 2 GNOME DEER

Pobrania
6061
Polubienia
864
Ocena
4,77
P
Printablesm_collectable

Open Frame Spiral & Lattice Holiday Bell Ornaments – Elegant Christmas Decor

Celebrate the season with these intricately designed bell-shaped ornaments, featuring five variants of open geometric patterns in spiral, lattice, and linear styles. Each bell is optimized for 3D printing and maximum visual impact.…

Pobrania
6058
Polubienia
1211
Ocena
4,98
P
PrintablesRetroMaker

Snowglobe Votive Ornament - Xmas Town

This classic holiday 3D model can be used as a large ornament for your Christmas tree or as a tabletop decoration. The charming glowing Christmas tree in the town square is surrounded by shops. This updated design prints better and has an…

Pobrania
5294
Polubienia
1038
Ocena
4,92
P
PrintablesJeff

Skull Ornament

Skull ornament Category: People

Pobrania
5083
Polubienia
913
Ocena
4,98
P
PrintablesDominik

Flat to 3D Christmas Tree Ornaments

Simple and stylish way to add charm to your Christmas tree. This festive set includes four beautiful shapes: a Christmas tree 🎄, a star ⭐, and two snowflakes ❄. Each ornament prints completely flat as three simple pieces that you slide…

Pobrania
5039
Polubienia
1259
Ocena
4,93
P
PrintablesJosef Průša

Deadpool Christmas ornament

Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…

Pobrania
4911
Polubienia
1117
Ocena
4,79
P
Printables3dprints4life

Snowflake Ornament Collection - 18 Snowflakes (window or gift decoration - Christmas)

18 Snowflakes with approx. 50 x 50 x 2 mm for Christmas decoration. Put your favorite snow flakes on your window, gifts or decorate your Christmas table. 09.12.2025: Added two more snowflakes See also my original snowflake collection with…

Pobrania
4770
Polubienia
602
Ocena
4,92
P
Printablesh3li0

ornaments • xmas 2025

ornaments • xmas 2025 four new modern and minimalist bauble designs for this years xmas season dimensions in mm: ~ 76mm diameter important · make sure that: your filament is dry and calibrated so that it deals appropriately with printing…

Pobrania
4625
Polubienia
1314
Ocena
4,9
P
PrintablesJosef Průša

Stormtrooper Christmas ornament

Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…

Pobrania
4587
Polubienia
1241
Ocena
4,9
P
PrintablesSethR1223

Cyber Snowflake Christmas Ornament

Just a rudimentary, stylized snowflake made to resemble a circuit board for the technology-minded among us to integrate into our winter holiday. Designed to be hung from a tree, with the option to hang it from any of the six points to…

Pobrania
4490
Polubienia
1419
Ocena
4,97
P
PrintablesMaxT

Christmas Door Trim Corner 60 - Santa Sleigh and Reindeer (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…

Pobrania
4453
Polubienia
838
Ocena
5
P
PrintablesOld Lady

Christmas Tags, Christmas Ornaments 2.0

Another variety of Christmas tags

Pobrania
4253
Polubienia
663
Ocena
4,93
P
Printablesrav
Pobrania
4198
Polubienia
639
Ocena
5
P
PrintablesJarvis

Spiral Christmas Ornament

Not to be Sold I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Simple Christmas Ornament. I printed a simple letter and hung it…

Pobrania
4169
Polubienia
806
Ocena
4,88

*Updated* Christmas Ornament Snitch Kit Card

UPDATE: Due to popular request, the Kit Card was updated in regards of tolerance (fit) and stability. For optimal fit I would recommend using a layer height of 0.2 mm. Christmas ornament version of the loved snitch card. Merry christmas!…

Pobrania
4076
Polubienia
1512
Ocena
4,76
P
PrintablesSeppo

Snowflake Christmas Ornament Christmas Tree XMAS decoration

This little Christmas ornament is perfect for your window or your christmas tree. It's easy and fast to print. Feel free to share your experiences with the community. Design by protechnordic, found on Thingiverse here:…

Pobrania
4065
Polubienia
698
Ocena
4,99
P
PrintablesPopandsicle

Christmas Tree Ornament Set Pt II: The New Batch (Vase Mode Prints)

To celebrate my 2nd Holiday season on Printables, I decided to add an additional 6 ornament designs to my collection of Vase Mode Christmas Tree Ornaments. I posted the original 6 last year, and they quickly became my most popular…

Pobrania
3955
Polubienia
954
Ocena
4,98
P
Printablesrazandersen

Harry Potter ornaments / pendants

harry potter tags for Christmas, Pendants or keychains

Pobrania
3904
Polubienia
936
Ocena
4,86
P
PrintablesMAKERTEAM®

Christmas Tree Ornament SPHERE (80mm round) with Cap (Weihnachtsbaumschmuck)

This 80mm christmas tree ornament sphere has a very nice shape and is easy to print. I recommend to use metallic filament for an even better look as mentioned on the pictures. Available in TWO versions with SLIM & MEDIUM fins. The cap is…

Pobrania
3879
Polubienia
904
Ocena
5
P
PrintablesDeadMoon

Snowflake Wall Decor and Ornament Set

Celebrate winter with this detailed snowflake collection designed for both display and decorating. The set includes a large wall version, a small wall version, and a dedicated ornament version with a built in ring for hanging. The wall…

Pobrania
3850
Polubienia
685
Ocena
5
P
PrintablesJosef Průša

Jack Skellington Christmas ornament

Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…

Pobrania
3800
Polubienia
944
Ocena
4,89
P
PrintablesBemko

Christmas tree spiral ornament with mount

I added a mount to hang it pointing down. I also resized the spiral to make it more sleek. I think it looks better this way and it is easier to print too. Looks best in silk or transparent filament. Ornament_thin_mount_v2.stl has a wider…

Pobrania
3709
Polubienia
944
Ocena
4,85