Liczymy pasujące modele…
Hier eine "Abdeckung Heizungsrohr/ Cover heating pipe" mit unsichtbarer Befestigung. Das Modell sieht sehr ansprechend aus und ist für verschiedene Rohrdurchmesser erhältlich. Die Befestigung erfolgt ohne Schrauben o.ä., sondern wird wie…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
In Anlehnung an mein Modell " Abdeckung Heizungsrohr/ Cover heating pipe " habe ich diese neue Version konstruiert. Das Modell sieht nun etwas gefälliger aus und ist für verschiedene Rohrdurchmesser erhältlich. Es werden keine Schrauben…
Wydruk około 1,42 €–1,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tired of spending more than you want for a closet/wardrobe door knob from a big box retailer? Well look no further! Here you'll find a knob design with a print-in-place hole to secure your nuts and provide a tight hold of your…
Wydruk około 1,65 €–2,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is remix of IXPatch's soft serve screw top storage container. The hole in the bottom is 3.9 mm in diameter. I recommend printing the soft-serve with supports around the outside. You can paint out support from the inside. The default…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Prostokątna kratka wentylacyjna z żebrowaniem kierunkowym (louver design). Przeznaczona do montażu w cokołach meblowych (np. pod lodówkę do zabudowy), drzwiach łazienkowych, szafach technicznych oraz obudowach grzejników. Kąt nachylenia…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
This slider snaps into the generic ClosetMaid shelving, no need to buy the special SuperSlide shelving. Print instructions Super simple print, no overhangs. I chose PETG for its superior strength and UV resistance. Link to source OnShape…
Wydruk około 2,86 €–3,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You wouldn't 3d print a full sized closet would you? Why: A small Project of mine is to make easily expandable function furniture storage solutions. This is a open source project anyone can contribute to and also my first project on…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The original rail snapped in two parts so it was impossible to get the drawer all the way in. I constructed this and it worked great. To minimize supports and still have some strength i constructed it with a 0,2 mm raft and printed it…
Wydruk około 1,18 €–1,44 € nettoWstępna wycena jednego wariantu
Our cats loooooove to open closet doors, especially when they know they're in the background of a Zoom meeting! These keeper-outers slide over the hinged areas of bi-fold closet doors, which prevents the adorable little jerks from opening…
Wydruk około 3,76 €–4,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tried a model. Didn't fit well and didn't hold up to my kids pounding it on the closet rod with a rubber mallet! So designed one that works better! :-)
Wydruk około 0,91 €–1,12 € nettoWstępna wycena jednego wariantu
This is a rosette for the heater mounting. Two parts to print.
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A customizable/parametric insert for the Stanley 121/Prime-Line N 6560 closet door floor guide. A preset is included for 1-3/8" wide doors. Set the “Door Thickness” variable in the OpenSCAD customizer to produce inserts for doors with…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu
Supports obligatoires. Prendre les supports organiques, il s'enlèvent facilement (voir photos) Print with supports. Take the organ supports, they are easily removed (see photos).
Wydruk około 0,86 €–1,05 € nettoWstępna wycena jednego wariantu
The idea is simple, add a knob to my closet door so I can install a simple latch to keep the fsking cat out. Behold! I made a few modifications after printing it. I think it will work better now, and next time I print it… I think I'll go…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
No supports needed. The back wall of the closet is 1.5mm thick, so at 0.25mm layer height and 3 solid top and bottom layers, it will print solid. The rest was at 15% fill. The doors' edges may need a bit of sanding to slide smooth.
This latch is very strong to close a closet or drawer with big power. I designed the latch for my closet. Our cats always tried to open the door and do some chaos with our clothings. With this latch the door is always closed.
Give me a Like 💗 Follow Me 😁🤗 Closet Hook Extension Closet Hook The hook has a 10mm hole. It comes in three thicknesses. You can simply attach the hook to the hanger and hang it. If you have other ideas, feel free to change it, I Uploaded…
This is a simple pill tray/pill organizer/pill dosette box, generated with OpenSCAD. The scad files are included, so you can adjust the number of chambers, the text along the side or whatever else you want to customize. The default…
Fun toy to play with. Hexagon columns jointed together can slide up and down. The model resembles football. The model is printed in one piece. No special settings/Supports required. Infill 5-15%. Layer height 0.2mm or less. Model on…
Inspired by @Mimo47_326620's Closet rod holder for hanger . I've already made a 1-5/16" 3mf and there are STEP files (should work in OrcaSlicer, Prusa Slicer, Bambu Studio) for 1" 1-1/16" 1-5/16" 1 1/2" 16mm 20mm This lets you hang a…
Parametric Clothes Hanger Hook (Closet Hook) Hook to allow daisy-chaining of clothes hangers. Improved and parametric remix of the original by goprinttech: https://www.thingiverse.com/thing:5254835 Improvements: Smaller size for quicker…
This is a modern closet for dolls. Use pieces of 1.75 filament for the hinges. First place the filament piece at the top or bottom of the door, then put the door on the closet frame and then insert the other piece. The printed model in…
Basic dimensions are down in a drawing, you should scale the model to fit your bag and clothes rod. Print on the side, no supports needed. Add enough wall layers to achieve your required strength.
The design is my own. Its easy to print, with no supports. Support my work You can buy me Coffee Or you can just click like button. Also comment and your photo of your print are welcome. Important The current STL files in the download…
Modular Hydroponic Tower made for 2inch Net Pod this is the best model as of now and its a world of difference with the other one. the fact that you dont need to spend hundreds of hours more to print the net pods, simply use cheap…
The Rosetta Stone is a decree issued in 196 BC in three scripts (hieroglyphics, demotic script, and Greek), allowing scholars to decipher Egyptian hieroglyphs and gain insight into ancient Egyptian history and culture.
Intro A versatile and functional 3D-printed rod holder designed to help you build custom wardrobes, closets, or storage racks . This model serves as a sturdy mount for a closet rod or clothing rail — just print, assemble with two pieces…
reproduction de rosace gothique deux modèles un petit modèle avec anneau ( pour porte clés , pendentif) Dia 56 mm un grand modèle pour desous de verre etc..Dia 80 mm Gothic rosette reproduction two models a small model ( with key ring ,…
You can get the original from VAL here https://www.printables.com/model/529390-magic-hanger I made this remix to adjust the model a little to fit my needs.
Printed in PLA, 15% infill with the standard Bambu Studio values. AMS is not required to print the colors. A skewer stick has been used to make the bar inside the closet. The pieces are glued. Door pivots need to be trimmed and sanded a…
Print back side down. No supports needed.
Store backpacks and other items neatly in a wardrobe off the floor. Three variations available for different handle strap widths. Supports heavy backpacks with no issues if correct print settings are used. Print entirely with walls for…
🧰 Heavy Duty Closet Pole Sockets A 3D-printable Heavy Duty Closet Pole Socket designed to support standard closet and wardrobe poles. This model provides a practical DIY solution for replacing or creating wall-mounted closet rod supports.…
This 1.25" closet rod holder has a split top with puzzle piece tabs to grip tightly against stretching forces. The two halves have tight tolerance and fit together snugly, no need for glue or screws. Also included is an enclosed holder…
Prints in one part in about 7h large (5.5h small) with 0.6 nozzle, 0.35 layer height and 15% infill. Customize in Prusa Slic3r by choosing different filament colors for layers (see picture) Two sizes are available. One for Prusa MKX and…
Space-saving, sturdy bag hanger for closets: sleek, mounts easily, keeps bags organized and accessible. Works for organizing Purses, Backpacks, Satchels, Crossovers, and Handbags. __________________ Notice: These designs are copyrighted…
“Every day, ere the hour of dawn, the gardeners would pick the roses which lined the four avenues of the garden, and would pile them in the center of the floor of His blessed tent. So great would be the heap that when His companions…
Just wanted an embossed, english version of this box. I'm also including an engraved version as well. No picture will be added so please just check the 3d file instead.
Small closet for indoor encounters Supports recommended
Included model is for a 1.25" (32 mm) rod. Fusion 360 file is included, change the parameters to get a model for whatever size rod you need.
This is a mount clip/bracket thingy for a Rubbermaid closet wire shelf. The original that came with the kit had the built in nailed anchor for drywall that got damaged when I needed to relocate the shelving. This version works best with…
There are others out there, this is what I came up with. This lets you hang your filament spools from a 1 3/16" (30 mm) closet rod. The lip on the end is 54mm, works great with my 1 kg rolls of Monoprice filament that I've been using.…
If you are having a hard time snapping the hanger onto the wire rack try adjusting the x-y hole compensation by -0.2mm.
You will have to super glue top and bottom parts of the closet. Also printed with 2.85mm filament so I used a peices of thick paper clip for door hinges.
This simple hook will fit a standard Closet rod and not spin once attached. The inner diameter is 31.5 mm (or just under 1.25 inches) . This will easily hold most winter coats, which is what it was designed to do. Print Settings Printer…
A divider for a closet's clothes-hanging rod.
If you need a simple to print and easy to fit pipe cover, this might be what you are looking for. The hole is set to fit 15mm pipes. CAD (fusion360) file is included to allow you to customise. Print two to create a single pipe cover - For…
Closet rod bracket Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 100 Filament: BQ PLA White How I Designed This =================== Created in fusion360, .f3d file provided.…
This is a remix of the "Rubbermaid Closet Wire Shelf Clip" by Prateek R. This one is for my Closet Maid wire shelves which have a clip that is a little bit longer between the shelf and the screw hole. I made it to use some drywall hangers…
Rosettes to Cover holes in walls, floors or ceilings around heating pipes. The two pieces press fit together around a p
Prevents sliding closet doors from getting off track
This is a 3D printable model of a pipe reducer designed to connect two irrigation pipes of different diameters: 10mm and 6mm. The reducer ensures a secure and leak-proof connection, making it ideal for gardening, agricultural, or other…
Choose deep or normal pockets- Scale up to fit any size rod. Bedroom closets, filament storage & more!
A pull knob for accordion closet doors, cabinets, drawers, etc. It's designed to be fixed from the other side by a #6 screw, such as a long enough drywall or construction screw. Prints pretty easy on a sticky build surface. Recommend you…
cabinet/closet door knob - width is 45mm height is 23mm with 16mm place for fingers and 3mm hole for screw. Printed with 20% infill with pink PETG.
If you need a simple to print and easy to fit pipe cover and want a parametric CAD file as well, this might be what you are looking for. I have made this CAD design (Fusion360) parametric for easier adjustment, such as hole size - plate…
Hier mal meine erstellte Heizkörperrosette. Abmaße können den Bildern entnommen werden.
This is a simple template that can be used for making rosettes out of ribbons or fabric. Depending on how smooth your printer's are you might get snags on lighter fabrics. The print settings I use with this are Layer height: 0.2mm Infill:…
Bill of Materials with links at the very bottom. Some links are part of an Amazon Associate program, and I may receive compensation from qualifying purchases. Introducing the Overengineered Filament Closet. The system uses the RepRack:…
I designed this rotated S-shaped hook to hang my backpack flat against a closet rod or bar. Unlike a regular S-hook, this one is rotated 90°, so your backpack hangs parallel to coats and clothes – saving space and keeping things tidy.
A simple heating pipe cover printed in PETG. Supports needed only for the bolts connecting the two parts (see included picture of print) Printed on Prusa Mini+ with standard profile 0.15mm. CAD file .f3d for Fusion360 included, parametric…
I printed them from PLA+, but you can print them from PETG Print 2 pieces to get a set, there is no need to mirror them. Make sure you print the outer walls first, because of the tight tolerances. Please don't reupload it to other sites,…
3 different models depending on screw type for mounting. - Rod holder 25 mm IKEA PAX screw (used for the pre drilled holes) - Rod holder 25 mm countersunk screw - Rod holder 25 mm round head screw Distance between holes are made for the…
I was busy designing yet another one of these, but then I came across this very solid looking model by printandplay on thingiverse. My rod is Ø 25mm (I'm using the inner part of an IKEA extendable curtain bar that is no longer in use, but…
Avant : pas de dosette sous la main quand on en a besoin… Maintenant elles sont à disposition à côté de la cafetière dans un distributeur beau et pratique ! Impression PLA ou PETG Périmètres : 3 Remplissage : 15 % minimum Supports peints…
A Rosette showing status as an Inquisitor working above and beyond the Imperium of mankind to protect itself from the enemy within, without, and beyond. Check out my collection of props! Plasma Blaster -…
I only have a couple of belts and only one that I wear regularly. All belt storage systems seem to assume that I own 10 or so and I'm just not a big fan of hording stuff that I never use. This is just a no-nonsense way of storing that one…
A quick hook for closet dowels with 1-1/4" diameter. Good for hanging packs and other non clothing items. I printed this at 15% infill with 1mm wall thickness. I haven't loaded it to failure yet but it is plenty rigid enough.
End support for a closet rod. The slot fits a 33.70mm rod snugly. Center hole is designed for a countersunk screw and the top hole is for an optional nail to keep the bracket in the proper orientation. Recommend strong infill pattern and…
Replicated the pins that came with the closet and made them a bit bigger to hold the shelves better and with a tighter fit. Printing In order for the part to have good structure, the printing orientation should be parallel with the pin.…
I wanted to label the freshly organized wire closetmaid shelves to ensure they stay that way and the closest solution I could find was slightly too large for my shelves so I trimmed it down to size! Model is now 26mm tall and ~72mm…
Small latches that screws into the door frame stop closet doors from swinging back open. Uses one M4 wood screw.
I remixed the Closet to fit my Ender 3S1-Pro. It is still a tight print, but it works.
Rosette for pipe with a diameter of 16mm. I printed it with the visible part down without supports. I put the supports just under the pins for connection. Video: https://youtube.com/shorts/CA6v1yBhQjI?si=PzMssdViTufjmICR Thank you for…
not my design, it is a remake from an old hanger found at my parent's home. useful for drying clothes on a closet door with enough distance to the closet. diameter of the door part is 18,3 mm, should also fit slightly thinner doors (1 mm…
An Inquisitorial Rosette such as worn by the holy ordos. I include a split model for easier printing. Category: Costume
These collars are designed to neatly hide the gap between your wall and heating pipes. The two halves snap together firmly, so they appear like a single piece from some distance. Small elastic features on the inside help keep everything…
Closet dividers for clothes hangers that attaches to rod.
These hooks should fit almost all 1kg filament spools. It fits around a standard ~18mm closet rod. I recommend printing in PETG with additional (4 or 5) top and bottom layers to improve the strength and prevent it from bending under the…
Remixed doors to have modern easy to grasp for granddaughter handles. I only include a single stl file, you just swap x axis in slicer. I include 3mf file, it has LEFT and RIGHT printed on door in different extruder. You change this to…
Wall mount for 25mm pipe
A set of easy to print latch and lock to baby-proof drawers, closets, cabinets, etc. by making them harder to open for babies (but not adults). The pieces are easy to install using wood-screws of 3 to 4mm diameter (and approximately 15mm…
A simple and functional hook designed to hang a backpack from a closet rod. It's ideal for spaces where there’s no room for bulky hangers or when a backpack doesn’t sit well on a shelf. The hook is designed to fit standard closet rods…
Designed to snap onto a standard 1 3/8" closet rod but can be used on smaller diameter rods as well. Print in something strong and flexible like PETG, with as many wall loops as you think you'll need (I recommend 4 or more).
Print the two parts (rosette and shell) separately, and glue them together. Put two screws in the ceiling and mount the shell by twisting it in place. I printed mine in white PLA, with 0.20mm layer height for the rosette and 0.28mm for…
I was fed up with the mess in my bathroom-closet: made for standard size bathroom-closets modular 15x10x2cm/ 17x10x2cm. For beauty sponges, Serum-bottles, creams etc… works with 30% grid infill up to 100% layer-height 0.2mm printed with…
This is a simple handle for a line of Ikea closets. Sadly, I can't recall what the closets are called.
In a heavily trafficked entry way, with an excitable St. Bernard, the thin hardware store closet door guides don't stand a chance. I modeled this to be a drop-in replacement – and tougher. Print it with several perimeters for strength.…
This is a simple filament spool holder that hangs on a closet rod, or for that matter any rod. The side locks on to the shaft via a 45 degree turn. This was designed in mind for my MMU2 unit. Allowing me to better feed filament from…
An end cap for the Closetmaid rod ( https://www.amazon.com/ClosetMaid-2051-SuperSlide-Adjustable-Hanging/dp/B00KZZ5JZQ ).
A small and compact hanger that can be used to neatly hang and store things like caps or belts in closets. It's strong enough to support some light bags as well.
printed some very simple hooks for hanging relatively lightweight (i.e. a few kg or less) stuff like empty backpacks, and other stuff sized to fix approximately 33mm round rail in two sizes: shorter and longer
I wanted a simple component to hang bags and items on a supporting rod with a couple of goals - prints on its side for strength, no support required, hangs level when loaded, doesn't hang too low from the bar, and looks uncluttered. I…
The ClosetMaid shelving that was installed in our house uses a third wire that the clothes hangers can slide on. That bottom wire relies on the end caps to support the weight and stop clothes from sliding off the end. We reconfigured our…
My shelves are 1inch (25.4mm) but inside the snap part is only 1/2inch (12.7mm) so I had to remix the other closet maid label. However, I decided to just make this flush - for easier printing and so it looks better - hides more of the…
We have an old house, and the standard sliding closet door guides weren't tall or wide enough for our oddly-sized closet opening. This one follows the same profile, but is both taller and wider to keep the doors from getting stuck or…
Have you had a apartment or home where the closet rod socket broke? crazy frustrating and you can usually only buy pairs. well, now you can print just one! The opening is 1.38" or 35mm with a 0.2" or 4mm hole for a screw. It also includes…
Needed a place to hang dog leashes, backpacks, laptop bags and the like. Zwoop's original design only fit on the front bar of my wire shelves so I decided a re-mix was in order. Will fit other brands of wire shelving, see notes below.…
Compare to the Closet Maid Clips. Similar to their clips. Designed and made due to several of ours getting brittle. Please Like and Post your Makes. Much Appreciated!! Infill: Recommended 100% due to weight that can be placed on the clip…
